APT50N60JCCU2 ISOTOP(R) Boost chopper VDSS = 600V RDSon = 45m max @ Tj = 25C ID = 50A @ Tc = 25C Super Junction MOSFET Power Module Application * AC and DC motor control * Switched Mode Power Supplies * Power Factor Correction * Brake switch K D Features * G - S D IDM VGS RDSon PD IAR EAR EAS ISOTOP(R) Package (SOT-227) Very low stray inductance High level of integration Parameter Drain - Source Breakdown Voltage Tc = 25C Tc = 80C Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25C Max ratings 600 50 38 130 20 45 290 15 3 1900 Unit V A V m W A May, 2008 ID * * * Benefits * Outstanding performance at high frequency operation * Stable temperature behavior * Very rugged * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Easy paralleling due to positive TC of VCEsat * RoHS Compliant Absolute maximum ratings Symbol VDSS SiC Schottky Diode - Zero reverse recovery - Zero forward recovery - Temperature Independent switching behavior - Positive temperature coefficient on VF mJ These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. www.microsemi.com 1-3 APT50N60JCCU2 - Rev 2 G * K S Ultra low RDSon Low Miller capacitance Ultra low gate charge Avalanche energy rated APT50N60JCCU2 All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Symbol Characteristic IDSS RDS(on) VGS(th) IGSS Test Conditions Min Zero Gate Voltage Drain Current VGS = 0V,VDS = 600V Drain - Source on Resistance Gate Threshold Voltage Gate - Source Leakage Current Typ Tj = 25C Tj = 125C VGS = 0V,VDS = 600V VGS = 10V, ID = 22.5A VGS = VDS, ID = 3mA VGS = 20 V, VDS = 0V 2.1 40 3 Max 250 500 45 3.9 100 Unit Max Unit A m V nA Dynamic Characteristics Symbol Characteristic Ciss Input Capacitance Coss Output Capacitance Qg Total gate Charge Qgs Gate - Source Charge Qgd Gate - Drain Charge Td(on) Turn-on Delay Time Tr Td(off) Test Conditions VGS = 0V ; VDS = 25V f = 1MHz Rise Time Turn-off Delay Time Tf Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Eon Turn-on Switching Energy Eoff Turn-off Switching Energy VSD Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Min Typ 6.8 0.32 VGS = 10V VBus = 300V ID = 44A 150 Tj=25C VGS = 10V VBus = 400V ID = 44A RG = 3.3 30 nF nC 34 51 20 ns 100 20 Tj=25C VGS = 10V ; VBus = 400V ID = 44A ; RG = 3.3 Tj=125C VGS = 10V ; VBus = 400V ID = 44A ; RG = 3.3 405 J 520 660 J 635 VGS = 0V, IS = - 44A IS = - 44A Tj = 25C VR = 400V Tj = 25C diS/dt = 100A/s 0.9 1.2 V 600 ns 17 C SiC chopper diode ratings and characteristics IRM Maximum Reverse Leakage Current VR=600V IF(AV) Maximum Average Forward Current 50% duty cycle Min 600 Tj = 25C Tj = 175C Tc = 125C Tj = 25C Tj = 175C Typ Max 100 200 20 1.6 2 400 2000 VF Diode Forward Voltage IF = 20A QC Total Capacitive Charge IF = 20A, VR = 300V di/dt =800A/s 28 Q Total Capacitance f = 1MHz, VR = 200V 130 f = 1MHz, VR = 400V 100 www.microsemi.com Unit V A A 1.8 2.4 V May, 2008 Test Conditions nC pF 2-3 APT50N60JCCU2 - Rev 2 Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage APT50N60JCCU2 Thermal and package characteristics Symbol Characteristic Min RthJC Junction to Case Thermal Resistance RthJA VISOL TJ,TSTG TL Torque Wt Junction to Ambient (IGBT & Diode) Typ CoolMos SiC Diode RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Storage Temperature Range Max Lead Temp for Soldering:0.063" from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight 2500 -40 Max 0.43 1.4 20 Unit C/W V 150 300 1.5 29.2 C N.m g SOT-227 (ISOTOP(R)) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 1.95 (.077) 2.14 (.084) Cathode 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) Drain * Emitter terminals are shorted internally. Current handling capability is equal for either Emitter terminal. 38.0 (1.496) 38.2 (1.504) Source Gate Dimensions in Millimeters and (Inches) ISOTOP(R) is a registered trademark of ST Microelectronics NV Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 3-3 APT50N60JCCU2 - Rev 2 May, 2008 "COOLMOSTM comprise a new family of transistors developed by Infineon Technologies AG. "COOLMOS" is a trademark of Infineon Technologies AG".