T13E8.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Ceramic Trimmer Capacitors TZS2 Series 2.7 2.2 1. Ultra-small and thin type with external dimensions of 2.2(W)x2.7(L)x0.95(H)mm. (30% less in volume from the current product.) 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 3. Pierced square hole allows for high resistance to tuning force and in-process automatic adjustment. 4. Includig the fixed capacitor in parallel with trimmer capacitor makes reduction of space and cost of mounting in circuit. Please contact us about the capacitance value of built-in fixed capacitor. 1.0 0.6 0.20 Depth Features 1.0max. 2 0.4 Tolerance:0.1 in mm Applications *Crystal oscillators *Crystal filters *Hand radios *Cordless telephones *Cellular telephones *Tuner packs *Pagers *Remote keyless entry systems *PHS *Radar detectors *W-LAN *Compact radios *Headphone stereos Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage TZS2Z060A001 3.0 max. 6.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2Z100A001 3.5 max. 10.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2R200A001 7.0 max. 20.0 +100/-0% N750500ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance : 10000M ohm min. Torque : 0.5~5.0mNm Operating Temperature Range : -25~+85C Construction Cover Metal Rotor Monolithic Stator 8 T13E8.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Temperature Characteristics TZS2Z060 TZS2Z100 Z100 (NP0300 ppm/C) Cap.Change(%) Cap.Change(%) Z060 (NP0300 ppm/C) +8 +6 +4 +2 65 0 -25 -10 0 +4 -10 45 0 65 20 -2 2 Temp.(C) 0 -25 -4 +6 +2 85 20 -2 +8 85 45 -4 Temp.(C) -6 -6 -8 -8 -10 -10 -12 -12 TZS2R200 Cap.Change(%) R200 (N750500 ppm/C) +8 +6 +4 +2 20 -25 -10 0 Temp.(C) 45 65 85 0 -2 -4 -6 -8 -10 -12 Frequency Characteristics TZS2Z060 TZS2Z100 Z100 1000 100 100 Q 10 1 10 1000 1000 100 100 10 10 Q Capacitance (pF) 1000 Capacitance (pF) Z060 1 500 1000 1500 Frequency (MHz) 2000 200 400 600 800 1000 Frequency (MHz) Continued on the following page. 9 T13E8.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. Frequency Characteristics TZS2R200 R200 1000 1000 100 100 10 10 2 Capacitance (pF) Q 1 200 400 600 800 1000 Frequency (MHz) Land Pattern Temperature Profile 3.2 Preheating (in air) Solderring Gradual Cooling (in air) 230 2.1 1.0 Temperature (C) 183 100 0 60 sec. to 120 sec. Tolerance:0.1 in mm 30 sec. max. (Solder melting zone) Screwdriver and Screwdriver Bit Please use the following recommended screwdriver. You can order this driver with below part number. Though you can also adjust the capacitance value by commercial products, please use one which has the same head size as the below driver. Screwdriver Bit for Automatic Adjustment Murata Part No. : KMBT050 Screwdriver for Manual Adjustment Murata Part No. : KMDR050 80 20 1.5 Bit shape ; Quadrangle (0.54x0.54) Bit shape ; Quadrangle (0.54x0.54) (in mm) 10 1.8 dia. 2 (in mm) catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please T13E8.pdf 02.9.2 you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Notice (Storage and operating condition) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitor, please store under the condition of -10 to +40 C. and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of deliverly. 5. Open the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. Do not store under direct sunlight. 8. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxie gas, etc.) (2) In liquid (Ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above 2 Notice (Soldering) 1. Soldering (1) TZS2 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Standard soldering condition (a) Reflow soldering : Refer to the standard temperature profile. (b) Soldering iron: > Temperature of tip 260+-10 C. > Soldering time 3 sec. max. > Diameter 1mm max. > Wattage of iron 20W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 100micro m to 150micro m and the dimension of land pattern should be used Murata's standard land pattern at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause the bridging between the terminals or the contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only and do not apply flux except the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or the contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommendable chlorine content of solder is as follows. (a) Solder paste : 0.2wt% max. (b) String solder : 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferable 5.0N (Ref.; 500gf)max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to prevent trimmer capacitor from breakage. (3) Use the suitable dimension of the pick-up nozzle. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning Can not be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) 11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please T13E8.pdf 02.9.2 you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Notice (Handling) 2 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA : KMDR050 (2) Recommended screwdriver bit for automatic adjustment MURATA : KMBT050 2. When adjusting with a screwdriver, do not apply Notice (Other) 1. Before using trimmer capacitor, please test after assembly in your particular mass production system. 2. We have an application manual for trimmer capacitor. (Only for chip type) If you need it, please feel free to contact us. 12 excessive force(preferable 1.0N(Ref; 100gf) max.) to minimize capacitance drift. If excessive force applied to the screwdriver slot, it may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems.