1
H JST
Low profile connectors with high
withstanding voltage, designed for
connecting liquid crystal display backlight
lamps to their starters.
Features ––––––––––––––––––––––––
• High withstanding voltage
Conforming to IEC664-1 standards, the BHT connector is
designed to have a enough electrical creep distances at the
high-voltage side. Thus, compared to the conventional power
supply connector for liquid crystal display backlight lamps,
higher voltage is guaranteed.
• Low profile
Only 2.8mm height.
• Housing construction
Housing is of 2-piece construction, to prevent the contact for
the higher voltage side from being exposed, while the lower
voltage side is designed to be shorter for easy insertion of the
contact even with thin wires.
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #24)
• Voltage rating: 1,500V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ωmax.
After environmental testing/20m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 4,000V AC/minute
• Applicable wire: AWG #28 to #24
Insulation O.D./0.9 to 1.7mm
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
BHT CONNECTOR
Disconnectable Crimp style connectors
5.1mm
pitch
Crimp
Emboss Tape
2
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
0.9
4.75
1.41.3
1.2
1.5
SBHT-002T-P0.5 0.08 to 0.22 28 to 24 10,0000.9 to 1.7
Model No. Applicable wire
Insulation O.D. (mm)
Q'ty /
reel
mm2AWG #
Material and Finish
Copper alloy, tin-plated (reflow treatment)
H JST
2.8
8.4
5.1
13.2
2.2
Material
PBT, UL94V-0, natural (white)
2 1,000BHTR-02VS
Model No.
Q'ty / box
Circuits
Material and Finish
Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Wafer : PA 6T, UL94V-0, natural (ivory)
Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
2 1,250SM02B-BHTS-B-TB
Model No. Q
'
ty / reelCircuits
H JST
2.8
11.0
3.6
10.0
3.35 1.75 1.0
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed tape.
BHT CONNECTOR
RoHS compliance
RoHS compliance
PC board layout (viewed from component side) and Assembly layout ––––––––––––––––––
+0.1
0
1.8 +0.1
0
0.3
+0.1
0
0.9
+0.1
0
1.0
0
-0.1
9.8
0
-0.1
8.2
0
-0.1
7.3
+0.1
0
0.8
+0.1
0
12.3
+0.1
0
10.1
+0.1
0
11.1
2.8
16.8
4.5±0.05
3.0±0.05
2.7±0.05
9.2±0.05
Note:
1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
Crimping machine, Applicator–––––––––––––––––––––––––––––––––––––––––––––––
Contact Crimping
machine Crimp applicator Dies Crimp applicator with dies
MKS-L MK/SBHT-002-05 APLMK SBHT002-05
–– –
SBHT-002T-P0.5 AP-K2N
