Sta ndex Factons A Global Leader in the Design, Development, and Engineered Manufacture of Sensor and Magnetic Components Solutions for Tomorrow ELECTRONICS Series Datasheet BE Reed Relays www.standexmeder.com < 10 | v 5.08 on BE Series Reed Relays OL Features: Latching or High IR, Plastic or Metal Housing, High Life Expectancy, Variety of Pin Out Schemes Applications: General purpose, Test Equipment, Medical equipment & Others > Markets: Telecommunications, Medical, Test & Measurement & Others Part Description: BE 00-0X 00-X Fy oy oL Nominal Voltage Contact QTY Contact Form Switch Model Casing Option* 05, 12, 24 1,2,3,4,5 A,B,C, E 31, 66, 85, 90 P,M,V Customer Options Switch Model 66 85 90 Unit Rated Power (max.) a 10 100 10 W Any DC combination of V&A not to exceed their individual max.s Switching Voltage (max.) DC or peak AC 200 1,000 175 Vv Switching Current (max.) 05 1.0 05 A | DC or peak AC | Carry Current (max.) 125 25 12 A DC or peak AC Contact Resistance (max.) @ 0.5V & 50mA 150 150 150 mOhm Breakdown Voltage (min.) 0.225 25 02 kKVDC | According to EN60255-5 | Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage 0.5 1.1 0.7 ms Release Time (max.) Measured with no Coil Excitation 04 0.1 15 ms Insulation Resistance (typ.) 102 1022 10 Ohm | Rh<45%, 100V Test Voltage | Capacitance (typ.) @ 10kHz across open Switch 0.2 0.5 1.0 pF Standex USA: +1.866.782.6339 salesusa@standexmeder.com Version 01 Europe: +49.7731.8399.0 info@standexmeder.com 27.01.2015 Cys} Asia: +86.21,.37820625 salesasia@standexmeder.com ELECTRONICS. Modifications in the sense of technical progress are reserved.Sta ndex Poctons A Global Leader in the Design, Development, and Engineered Manufacture of Sensor and Magnetic Components Solutions for Tomorrow ELECTRONICS Series Datasheet BE Reed Relays www.standexmeder.com Coil Data : Coil Voltage Coil Resistance Pull-In Voltage Drop-Out Voltage | Nominal Coil Power Contact / Switch (nom.) (typ-) (max.) (min.) (typ.) Form Model Unit VDC Ohm VDC VDC mW 05 140 (345) 3.5 0.75 179 (72) 66 12 355 (2,145) 8.4 1.8 168 (67) 1A 24 3,285 (7,845) _| 16.8 3.6 175 (73) 05 105 (140) 3.5 0.75 238 (179) 85 12 620(1,000) | 8.4 1.8 232 (144) 24 1,400 (2,300) 16.8 3.6 411 (250) 1B 66 12 (1,100) | 8.4 1.8 131 24 (4,240) 16.8 3.6 136 12 2,145 8.4 1.8 67 ic 90 24 7,845 | 16,8 3.6 73 66 12 445 (1,100) | 8.4 18 324 (131) 24 1,700 (4,240) 16.8 3.6 339 (136) 2A 05 70 (110) | 3.5 0.75 357 (227) 85 12 420 (600) 8.4 1.8 343 (240) 24 1,080 (1,600) _| 16.8 3.6 533 (360) 05 49 3.5 0.25 510 2A+2B 85 1? 303 | 8.4 0.7 A75 24 1,140 16.8 14 505 The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per C. The figures in brackets are for realys in metal casing. Environmental Data Unit BE Reed Relay Shock Resistance (max.) 50 | 1/2 sine wave duration 11ms 8 Vibration Resistance (max.) 20 g Operating Temperature -20 to 70 C Lr Storage Temperature -35 to 95 C so ee Soldering Temperature (max.) 60 | 5 sec. max. C Handling & Assembly Instructions $ Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. - | Protective circuits need to be used. Life Test Data > External magnetic fields needs to be taken into *Load increase reduces life expectancy of Reed Switches consideration, including a too high packing density. Load This may influence the relays electrical characteristics. > Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. > Wave soldering: maximum 260/5 seconds. > Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. life time Standex USA: +1.866.782.6339 salesusa@standexmeder.com Version 01 Europe: +49.7731.8399.0 info@standexmeder.com 27.01.2015 Citys Asia: +86.21,.37820625 salesasia@standexmeder.com ELECTRONICS. Modifications in the sense of technical progress are reserved.E St d | Custom A Global Leader in the Design, Development, and areOlandex ~~. 8 p Engineered Manufacture of Sensor and Magnetic Components Solutions for Tomorrow ELECTRONICS Series Datasheet BE Reed Relays www.standexmeder.com Glossary Contact Form NO = Normally Open Contacts | SPST = Single Pole Single Throw we Form B NC = Normally Closed Contacts vt =o FormA SPST = Single Pole Single Throw RoHS COMPLIANT REACH COMPLIANT Changeover Form SPDT = Single Pole Double Throw | | Pin Out View from top of component 2.54mm [0.10"] pitch grid 10 11 UP 4.5 kVDC ONLY WHEN USING THE Coil 1 Coil 2 MERCURY WETTED (88) SWITCH 15 {py \ 1, lex 17 9] 7 | 12 ee o ONLY WHEN USING THE MERCURY WETTED (88) SWITCH Standex USA: +1.866.782.6339 salesusa@standexmeder.com Version 01 Europe: +49.7731.8399.0 info@standexmeder.com - 27.01.2015 Citys Asia: +86.21.37820625 salesasia@standexmeder.com Modifications in the sense of technical progress are reserved.