B45396R2337K509 - Kemet - Datasheet.Directory

Tantalum Chip Capacitors

Multiple Anode, Ultra-low ESR

Series/Type: B45396R

Date: July 2006

information contained therein without KEMET'sprior express consent is prohibited.

Construction

Polar tantalum capacitors with solid

electrolyte

Conventional TaMnO2technology

Three parallel low-ESR tantalum capacitors

in one case

Flame-retardant plastic case (UL 94 V-0)

Tinned terminals

Features

High volumetric efficiency

Ultra-low ESR values

High ripple current capability

Excellent solderability

Stable temperature and frequency characteristics

Low leakage current, low dissipation factor

Low self-inductance

High resistance to shock and vibration

Suitable for use without series resistor (special operating conditions recommended)

Lead-free and material content compatible with RoHS

Applications

Telecommunications (e.g. mobile phones, infrastructure)

Data processing (e.g. laptops, mainframes)

Measuring and control engineering (e.g. voltage regulators)

Medical engineering

DC/DC converters

Soldering

Suitable for reflow soldering (IR and vapor phase, in compliance with JEDEC J-STD-020 C) and

wave soldering

Delivery mode

Taped and reeled in accordance with IEC 60286-3

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 2 of 12Please read Important notes and

Cautions and warnings at the end of this document.

➀Encapsulation: molded epoxy resin

➁NiFe; tinned surface Sn100

Dimensions

Case size Dimensions in mm (inches)

KEMET EIA/IECQ L W H L2typ. W2±0.1 H2typ. P ±0.3

±(.004) ±(.012)

E 7343-44 7.3 ±0.3 4.3 ±0.3 4.1 ±0.3 7.3 2.4 1.8 1.3

(.287

±0.012)

(.169

±0.012)

(.161

±0.012)

(.287) (.094) (.071) (.051)

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 3 of 12Please read Important notes and

Cautions and warnings at the end of this document.

Marking

Case size E

Capacitance coding

1st and 2nd digit Capacitance in pF

3rd digit Multiplier: 6 = 106pF

7 = 107pF

8 = 108pF

Date coding

Year Month

S = 2004

T = 2005

U = 2006

V = 2007

W = 2008

X = 2009

1 = January

2 = February

3 = March

4 = April

5 = May

6 = June

7 = July

8 = August

9 = September

O = October

N = November

D = December

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 4 of 12Please read Important notes and

Cautions and warnings at the end of this document.

Specifications and characteristics in brief

Series Multiple Anode

Ordering code B45396R

Technology Ta-MnO2

Terminals Tinned

Rated voltage (up to 85 °C) VR4 ... 50 VDC

Rated capacitance (20 °C, 120 Hz) CR10 ... 1000 µF

Capacitance tolerance ±20%, ±10%

Maximum equivalent series

resistance

(20 °C, 100 kHz) ESRmax 30 ... 150 mΩ

Operating temperature range Top 55 ... +125 °C

Failure rate

(1 fit = 110-9 failures/h)

CRVR> 330 µFV

(at 40 °C; ≤VR,

RS≤0.1 Ω/V) ≤288

fit

Service life >500000 h

Leakage current (VR, 5 min, 20 °C) Ileak 10 nA/µC

Detail specification (tinned terminals) CECC 30801-805

Climatic category

(to IEC 60068-1)

(55 °C/+125 °C/56

days damp heat test)

55/125/56

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 5 of 12Please read Important notes and

Cautions and warnings at the end of this document.

Overview of types

(VDC)

(up to 85 °C) 4 6.3 10 16 20 25 35 50

CR(µF)

10 E

15 E

22 E E

33 E

47 E E

68 E E

100 E

150 E

220 E

330 E

470 E E

680 E E

1000 E

Upon request

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 6 of 12Please read Important notes and

Cautions and warnings at the end of this document.

Ordering code structure

B45 396R 1 477 + 5 0 *

Tantalum

capacitor

Series

396R = Multiple Anode,

Ultra-low ESR; tinned terminals

Rated voltage

0=4V,1=6.3V,2=10V,3=16V,4=20V,

5=25V,6=35V,7=50V

Rated capacitance + exponent

C [pF] 10x

E.g.: 686 = 68 pF 106=68µF, 157 = 15 pF 107= 150 µF

Capacitance tolerance

M=±20%, K = ±10%

Case size

5=E

ESR quality

9 = standard quality

0 = premium quality

Reel diameter

9 = 180 mm, 6 = 330 mm

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 7 of 12Please read Important notes and

Cautions and warnings at the end of this document.

1) Other values upon request

Technical data and ordering codes

(20 °C,

120 Hz)

µF

Case size DFmax

(20 °C,

120 Hz)

Ileak,max

(20 °C, VR,

5 min)

µA

ESRmax1)

(20 °C,

100 kHz)

mΩ

IAC,max

(20 °C,

100 kHz)

Ordering code

●Preliminary Data

* = Code number for reel diameter + = Capacitance tolerance

6 = 330-mm reel

9 = 180-mm reel

M = ±20%

K = ±10%

VR(up to 85 °C) = 4 VDC, VR(up to 125 °C) = 2.5 VDC

680 E 6 27 30 3.0 B45396R0687+50*

680 E 6 27 35 2.8 B45396R0687+59*

1000 E 6 40 30 3.0 B45396R0108+50*

1000 E 6 40 35 2.8 B45396R0108+59*

VR(up to 85 °C) = 6.3 VDC, VR(up to 125 °C) = 4 VDC

470 E 6 30 30 3.0 B45396R1477+50*

470 E 6 30 35 2.8 B45396R1477+59*

680 E 6 43 30 3.0 B45396R1687+50* ●

680 E 6 43 35 2.8 B45396R1687+59* ●

VR(up to 85 °C) = 10 VDC, VR(up to 125 °C) = 6.3 VDC

330 E 6 33 35 2.8 B45396R2337+50*

330 E 6 33 40 2.6 B45396R2337+59*

470 E 6 47 35 2.8 B45396R2477+50* ●

470 E 6 47 40 2.6 B45396R2477+59* ●

VR(up to 85 °C) = 16 VDC, VR(up to 125 °C) = 10 VDC

150 E 6 24 40 2.6 B45396R3157+50*

150 E 6 24 45 2.4 B45396R3157+59*

220 E 6 35 40 2.6 B45396R3227+50*

220 E 6 35 45 2.4 B45396R3227+59*

VR(up to 85 °C) = 20 VDC, VR(up to 125 °C) = 13 VDC

68 E 6 14 45 2.4 B45396R4686+50*

68 E 6 14 55 2.2 B45396R4686+59*

100 E 6 20 45 2.4 B45396R4107+50*

100 E 6 20 55 2.2 B45396R4107+59*

VR(up to 85 °C) = 25 VDC, VR(up to 125 °C) = 16 VDC

47 E 6 12 45 2.4 B45396R5476+50* ●

47 E 6 12 55 2.2 B45396R5476+59* ●

68 E 6 17 45 2.4 B45396R5686+50* ●

68 E 6 17 55 2.2 B45396R5686+59* ●

VR(up to 85 °C) = 35 VDC, VR(up to 125 °C) = 23 VDC

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 8 of 12Please read Important notes and

Cautions and warnings at the end of this document.

1) Other values upon request

(20 °C,

120 Hz)

µF

Case size DFmax

(20 °C,

120 Hz)

Ileak,max

(20 °C, VR,

5 min)

µA

ESRmax1)

(20 °C,

100 kHz)

mΩ

IAC,max

(20 °C,

100 kHz)

Ordering code

●Preliminary Data

* = Code number for reel diameter + = Capacitance tolerance

6 = 330-mm reel

9 = 180-mm reel

M = ±20%

K = ±10%

22 E 6 860 2.1 B45396R6226+50* ●

22 E 6 8100 1.6 B45396R6226+59* ●

33 E 6 12 50 2.3 B45396R6336+50* ●

33 E 6 12 65 2.0 B45396R6336+59* ●

47 E 6 16 55 2.2 B45396R6476+50* ●

47 E 6 16 65 2.0 B45396R6476+59* ●

VR(up to 85 °C) = 50 VDC, VR(up to 125 °C) = 33 VDC

10 E 6 5120 1.5 B45396R7106+50* ●

10 E 6 5150 1.3 B45396R7106+59* ●

15 E 6 8110 1.6 B45396R7156+50* ●

15 E 6 8140 1.4 B45396R7156+59* ●

22 E 6 11 110 1.6 B45396R7226+50* ●

22 E 6 11 140 1.4 B45396R7226+59* ●

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 9 of 12Please read Important notes and

Cautions and warnings at the end of this document.

Cautions and warnings

When using tantalum capacitors with a manganese dioxide coating, the following cautions and

warnings should be taken into account:

Polarity

Because tantalum capacitors are polar capacitors, it is important to observe their polarity

markings (positive pole on the anode, negative pole on the cathode). Any incorrect polarity

resulting from the sum of the AC and DC voltage components must be smaller than or equal to

the permitted polarity reversal voltage. To avoid reducing their reliability, this voltage may only

occur for a short time, at most five times for a duration of one minute per hour.

Voltage

The maximum continuous voltage depends on the ambient temperature. Within the temperature

range of 55 to +85 °C, the rated voltage is equal to the maximum continuous voltage. Between

+ 85 and + 125 °C the maximum continuous voltage must be reduced linearly from the full rated

voltage to 2/3 of it (derating). At 150 °C (only B4519*P series) the voltage must be reduced to 1/2

and at 175 °C (only B4519*T series) to 1/3 of the rated voltage. Operation below the maximum

continuous voltage has a positive effect on the capacitor’s failure rate. The maximum continuous

voltage must not be exceeded.

All unfavourable operating conditions (such as possible line overvoltages, unfavourable

tolerances of the transformation ratio of the line transformer in the equipment, repeated

overvoltages when the equipment is switched on, high ambient temperatures) must be taken into

account when determining the operating voltage.

The surge voltage is the maximum voltage (peak value) that may be applied to the capacitor for

short periods, at most five times for a total duration of up to 1 minute per hour. The surge voltage

must not be applied for periodic charging and discharging in the course of normal operation and

cannot be part of the operating voltage. The permissible surge voltage for all capacitors in this

data book is 1.3 x the rated voltage. The occurrence of voltage impulses (transient voltages) that

exceed the surge voltage may lead to irreparable damage.

Capacitance

The actual capacitance of a capacitor can deviate from the rated capacitance by as much as the

full magnitude of the tolerance at delivery. The capacitance varies with the temperature (at

+125 °C +12% up to +20%) and decreases with increasing frequency.

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 10 of 12Please read Important notes and

Cautions and warnings at the end of this document.

Low-resistance applications and voltage networks

For low-resistance applications, KEMET recommends a maximum operating voltage of half the

permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to

withstand voltage peaks. Depending on the conditions of use, the early failure rate is higher here

by a factor of 2 to 20 than in the range with a constant failure rate as specified in the data book.

When operated directly in a voltage network, the capacitor should be protected against

overvoltage, e.g. by a suppressor diode, and against polarity reversal by a diode. If a capacitor is

operated in an unprotected low-impedance circuit and fails because the permissible conditions for

the forward DC voltage, reverse DC voltage, surge current, power dissipation or temperature are

exceeded, the continued current flow through the overstressed capacitor may produce

overheating. The overheated capacitor may damage the surrounding components and the circuit

board.

Storage conditions

Capacitors with solid electrolyte may be stored at temperatures down to –80 °C. The upper

storage temperature must not exceed +85 °C (for blister tape the temperature limit is +40 °C).

The storage conditions should not exceed +40 °C and 70% R. H. A drypack is useful to prevent

the effects of humidity.

Tantalum chip capacitors B45396R

Multiple Anode, Ultra-low ESR

Page 11 of 12Please read Important notes and

Cautions and warnings at the end of this document.

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, KEMET is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether a KEMET product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic compon-

ents or failure before the end of their usual service life cannot be completely ruled out

in the current state of the art, even if they are operated as specified. In customer applica-

tions requiring a very high level of operational safety and especially in customer applications

in which the malfunction or failure of a passive electronic component could endanger human

life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured

by means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Should you have any more detailed questions

please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an or-

der.

We also reserve the right to discontinue production and delivery of products. Con-

sequently, we cannot guarantee that all products named in this publication will always be

available.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the “General Terms of Delivery for Products and Services in the Electrical In-

dustry” published by the German Electrical and Electronics Industry Association

(ZVEI).

Important notes

Page 12 of 12