DATA SHEET AS338-12, AS338-12LF: GaAs IC SPDT Nonreflective Switch 300 kHz-2.5 GHz Features Pin Out 7 50 CBL 6 3 V1 CBP GND CBP The AS338-12 is a low-cost IC FET SPDT nonreflective switch in a plastic SOIC-8 package for commercial applications. The switch operates with -5, 0 V or 0, +5 V when "floated" as shown on the following page. This general-purpose SPDT switch is used in various telecommunications applications. J3 5 4 Description NEW CBL 2 J1 J2 8 V2 10 k SWITCHES VS 1 Low DC power consumption High isolation (40 dB @ 0.9 GHz) Nonreflective Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 C per JEDEC J-STD-020 50 CBL GND External components shown are for positive voltage operation only. CBL = 100 pF, CBP = 1000 pF for operation >500 MHz. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 C (0, -5 V) Parameter(1) Frequency Insertion Loss(2) 300 kHz-0.5 GHz 300 kHz-1.0 GHz 300 kHz-2.0 GHz 300 kHz-2.5 GHz Isolation 300 kHz-0.5 GHz 300 kHz-1.0 GHz 300 kHz-2.0 GHz 300 kHz-2.5 GHz VSWR(3) 300 kHz-0.5 GHz 300 kHz-1.0 GHz 300 kHz-2.5 GHz Min. 43 36 27 23 Typ. Max. Unit 0.5 0.6 0.7 1.2 0.7 0.8 0.9 1.4 dB dB dB dB 46 39 30 26 1.2:1 1.2:1 1.3:1 dB dB dB dB 1.3:1 1.4:1 1.5:1 1. All measurements made in a 50 system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/C. 3. Input/output. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com Skyworks Proprietary Information. * Products and product information are subject to change without notice. * Spring 2006 661 Switches Operating Characteristics at 25 C (0, -5 V) Parameter Condition Switching characteristics Rise, fall On, off Video feedthru Frequency Min. Typ. 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz Input power for 1 dB compression Intermodulation intercept point For two-tone input power 5 dBm Unit 8 30 25 ns ns mV 0.5-2.5 GHz 0.05 GHz 28 23 dBm dBm 0.5-2.5 GHz 0.05 GHz 46 40 dBm dBm 25 C/W Thermal resistance Control voltages Max. VLOW = 0 to 0.2 V @ 20 A max. VHIGH = -5 V @ 50 A to -8 V @ 200 A max. 2.0 60 1.5 50 Isolation (dB) Insertion Loss (dB) Typical Performance Data (0, -5 V) 1.0 J1-J3 40 J1-J2 30 0.5 20 0 0 0.5 1.0 1.5 2.0 2.5 0 1 2 3 4 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency Isolation vs. Frequency 5 2.00 VSWR 1.75 1.50 1.25 1.00 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) VSWR vs. Frequency Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 662 Spring 2006 * Skyworks Proprietary Information. * Products and product information are subject to change without notice. Switches Truth Table Absolute Maximum Ratings Negative Operation Characteristic V1 V2 J1-J2 J1-J3 0 -5 Insertion loss Isolation -5 0 Isolation Insertion loss V2 J1-J2 VHIGH 0 Insertion loss Isolation 0 VHIGH Isolation Insertion loss J1-J3 SOIC-8 0.050 (1.27 mm) BSC 0.244 (6.20 mm) 0.228 (5.80 mm) Pin 1 Indicator Pin 1 0.068 (1.73 mm) Max. 0.197 (5.00 mm) 0.189 (4.80 mm) 0.010 (0.25 mm) 0.004 (0.10 mm) +0.2 V, -8 V Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Recommended Solder Reflow Profiles Refer to the "Recommended Solder Reflow Profile" Application Note. 0.020 (0.51 mm) Max. 0.049 (1.24 mm) 0.016 (0.41 mm) -40 C to +85 C -65 C to +150 C SWITCHES All other conditions not recommended. VHIGH = 5 to 8 V (VS = VHIGH 0.2 V). 1. Refer to Application Notes for further information. Pin 8 Control voltage Storage temperature Positive Operation(1) V1 2 W > 500 MHz 0/-8 V 0.5 W @ 50 MHz 0/-8 V Operating temperature All other conditions not recommended. Value RF input power 0.016 Max. (0.41 mm) x 45 Chamfer 0.158 (4.00 mm) 0.150 (3.80 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 8 Max. Tape and Reel Information Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com Skyworks Proprietary Information. * Products and product information are subject to change without notice. * Spring 2006 663