Part Number 856695 140 MHz SAW Filter Data Sheet Features * * * * * * * * * For multiple applications Usable bandwidth 10 MHz Low loss High attenuation Balanced operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 9.10 x 4.80 x 1.24 mm Bottom View SMP-35C 1 0.69 1.24 NOM. 1.35 MAX. 9.10 2 3 10 4 9 5 8 7 6 2.54 1.50 2.54 4.80 0.80 Pin No. 9 10 4 5 1,2,3,6,7,8 Description Input + Input Output + Output Case Ground 1.00 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. (c) Page 1 of 6 Part Number 856695 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Center Frequency Minimum Insertion Loss Amplitude Variation 135 - 145 MHz Phase Linearity 136 - 144 MHz 135 - 145 MHz Average Group Delay 135 - 145 MHz Relative Attenuation (4) 10 - 116 MHz 116 - 125 MHz 125 - 127.5 MHz 152.5 - 158 MHz 158 - 177 MHz 177 - 280 MHz Triple Transit Suppression Source Impedance (balanced) (6) Load Impedance (balanced) (6) Minimum Typical (5) Maximum Unit - 140 10 11.5 MHz dB - 0.4 0.9 dB p-p - 2.0 2.2 6 8 p-p p-p 0.72 0.77 0.82 s 48 40 33 31 35 40 30 - 52 45 41 41 45 50 45 50 50 - dB dB dB dB dB dB dB Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the TriQuint matching schematic shown on page 5 In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Relative to minimum insertion loss Typical values are based on average measurements at room temperature This is the optimum impedance in order to achieve the performance shown Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. (c) Page 2 of 6 Part Number 856695 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -20 to +85 C Parameter (3) Center Frequency Minimum Insertion Loss Amplitude Variation 135 - 145 MHz Phase Linearity 136 - 144 MHz 135 - 145 MHz Average Group Delay 135 - 145 MHz Relative Attenuation (4) 10 - 116 MHz 116 - 125 MHz 125 - 127.5 MHz 152.5 - 158 MHz 158 - 177 MHz 177 - 280 MHz Triple transit suppression Source Impedance (balanced) (6) Load Impedance (balanced) (6) Minimum Typical (5) Maximum Unit - 140 10 11.5 MHz dB - 0.4 0.9 dB p-p - 2.0 2.2 4 8 p-p p-p 0.72 0.77 0.82 s 48 40 33 31 35 40 30 - 52 45 41 41 45 50 45 50 50 - dB dB dB dB dB dB dB Notes: 1. All specifications are based on the TriQuint matching schematic shown on page 5 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Relative to minimum insertion loss 5. Typical values are based on average measurements at room temperature 6. This is the optimum impedance in order to achieve the performance shown Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. (c) Page 3 of 6 Part Number 856695 140 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. (c) Page 4 of 6 Part Number 856695 140 MHz SAW Filter Data Sheet Matching Schematic Actual matching values may vary due to PCB layout and parasitics 27nH 27nH 9 50 Balanced Input 50 4 18pF 18pF 27nH 10 1,2,3 6,7,8 5 50 Balanced Output 50 27nH Marking PCB Footprint 1.19 9.29 1.19 TriQuint 856695 JJJYHH 5.00 3.55 1.53 ID Dot Date Code 1.70 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) 1.01 1.01 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 16.8 2.7 ID dot O330 4.0 0.3 2.0 O1.5 A 1.75 7.5 16.0 9.4 O102 O20.2 O13.0 2.0 Direction of travel 1.6 5.1 8.0 O1.5 A Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. (c) Page 5 of 6 Part Number 856695 140 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Pyroelectric Voltage Input Power Symbol Minimum Maximum T Tstg VPyro Pin -40 -55 - +85 +125 50 +20 Unit o C C mV p-p dBm o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev B Or contact one of our worldwide Network of sales offices, Representatives or distributors 09-07 TriQuint Semiconductor, Inc. (c) Page 6 of 6