3.0x2.0mm SMD CHIP LED LAMP APK3020PBC BLUE Features Description !3.0mmX2.0mm SMT LED, 1.3mm THICKNESS. The Blue source color devices are made with InGaN on !LOW POWER CONSUMPTION. SiC Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE:2000PCS/REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAC4200 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:FEB/28/2003 DRAWN: F.Y.YUAN PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e A P K 3020P B C Iv (m c d ) @ 20 m A L en s Ty p e BLUE ( InGaN ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 21/2 18 60 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e peak Peak Wavelength Blue D Dominate Wavelength 1/2 Ty p . Max . Un its Tes t Co n d it io n s 468 nm IF = 2 0 m A Blue 470 nm IF = 2 0 m A Spectral Line Half-width Blue 25 nm IF = 2 0 m A C Capacitance Blue 65 pF V F = 0 V;f= 1 M Hz VF Forward Voltage Blue 3.65 4.2 V IF = 2 0 m A IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25C P ar am et er B lu e Un its Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC4200 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:FEB/28/2003 DRAWN: F.Y.YUAN PAGE: 2 OF 4 Blue APK3020PBC SPEC NO: DSAC4200 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:FEB/28/2003 DRAWN: F.Y.YUAN PAGE: 3 OF 4 APK3020PBC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAC4200 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:FEB/28/2003 DRAWN: F.Y.YUAN PAGE: 4 OF 4