MEMS Flow Sensor D6F-@N2/-02L2 For LPG and LNG Applications. Metal Body. Measures gas flow of 1 to 5 L/min. High accuracy of 3 FS. Flow rates can be measured without being affected by temperature or voltage. RoHS Compliant Ordering Information Appearance Case Aluminum alloy Applicable fluid Measured flow rate range City gas (13A) (See note.) LPG (See note.) Note: Model number 0 to 1 L/min D6F-01N2-000 0 to 5 L/min D6F-05N2-000 0 to 2 L/min D6F-02L2-000 Minimum order 1 The fluid must be clean, dry gas, with no dust or oil mist. Connections Absolute Maximum Ratings Power supply voltage Vcc 26.4 VDC D6F-01N2-000 D6F-05N2-000 D6F-02L2-000 Output voltage Vout 6 VDC Pin No. 1: Vcc 2: Vout 3: GND Connectors Molex 51021 Terminals Molex 50079 Wires AWG26 or AWG28 Item Symbol Rating Unit Performance Item Model number D6F-01N2-000 Flow rate 0 to 1 L/min (normal) (See note.) Joints Re 1/4 thread Case material Aluminum alloy D6F-05N2-000 0 to 5 L/min (normal) (See note.) D6F-02L2-000 0 to 2 L/min (normal) (See note.) LPG Operat- Applicable fluid City gas (13A) ing (The fluid must be clean, dry gas, with no dust or oil mist.) condiMax. allowable 200 kPa tions pressure Operating temperature -10 to 60C (with no condensation or icing) Operating humidity 85% max. (with no condensation or icing) Storage temperature -40 to 80C (with no condensation or icing) 2: Vout 1: Vcc 3: GND Enlarged view Storage humid- 85% max. (with no condensation or icing) ity Power supply voltage 10.8 to 26.4 VDC Output signal Analog output, 1 to 5 VDC (non-linear output) Current consumption Without load: Vcc = 12 to 24 VDC, Vss = 0 V, 25C, 15 mA max. Insulation resistance Between Sensor outer cover and lead terminals: 20 M min. (at 500 VDC) Withstand voltage Between Sensor outer cover and lead terminals: 500 VAC, 50/60 Hz min. for 1 min (leakage current: 1 mA max.) Note: "L/min (normal)" is the volume flow rate at 0C and 101.3 kPa. 1 D6F-@N2/-02L2 D6F-@N2/-02L2 Dimensions (Unit: mm) D6F-01N2-000 D6F-05N2-000 D6F-02L2-000 Two, M3 screws, Depth: 5 min Mounting Hole Dimensions 16.2 16.20.05 620.5 37 Two, 3.5 dia. 370.05 3.7 6 21.60.5 10 3-17 10 Lead Wires (Included) 20035 22.10.5 10015 Brown wire Black wire 8.85 1. Vcc 2. Vout Two, tapered Rc1/4 pipe threads 0.35 Blue wire 3. GND ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A180-E1-01 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Electronic Components Company Semiconductor Division H.Q. Micro Devices Division 686-1 Ichimiyake, Yasu, Shiga, 520-2326 JAPAN Tel: (81)77-587-7486/Fax: (81)77-587-7503 Printed in Japan 0109