D6F-@N2/-02L2
MEMS Flow Sensor
1
For LPG and LNG Applications.
Metal Body.
■Measures gas flow of 1 to 5 L/min.
■High accuracy of ±3 FS.
■Flow rates can be measured without being
affected by temperature or voltage.
Ordering Information
Note: The fluid must be clean, dry gas, with no dust or oil mist.
RoHS Compliant
Appearance Case Applicable fluid Measured flow rate
range
Model number Minimum order
Aluminum alloy City gas (13A) (See note.) 0 to 1 L/min D6F-01N2-000 1
0 to 5 L/min D6F-05N2-000
LPG (See note.) 0 to 2 L/min D6F-02L2-000
Absolute Maximum Ratings
Performance
Note: “L/min (normal)” is the volume flow rate at 0°C and 101.3 kPa.
Item Symbol Rating Unit
Power supply voltage Vcc 26.4 VDC
Output voltage Vout 6 VDC
Item Model number D6F-01N2-000 D6F-05N2-000 D6F-02L2-000
Flow rate 0 to 1 L/min (nor-
mal) (See note.)
0 to 5 L/min (nor-
mal) (See note.)
0 to 2 L/min (nor-
mal) (See note.)
Joints Re 1/4 thread
Case material Aluminum alloy
Operat-
ing
condi-
tions
Applicable fluid City gas (13A) LPG
(The fluid must be clean, dry gas, with no dust or oil mist.)
Max. allowable
pressure
200 kPa
Operating tem-
perature
−10 to 60°C (with no condensation or icing)
Operating hu-
midity
85% max. (with no condensation or icing)
Storage tem-
perature
−40 to 80°C (with no condensation or icing)
Storage humid-
ity
85% max. (with no condensation or icing)
Power supply voltage 10.8 to 26.4 VDC
Output signal Analog output, 1 to 5 VDC (non-linear output)
Current consumption Without load: Vcc = 12 to 24 VDC, Vss = 0 V, 25°C, 15
mA max.
Insulation resistance Between Sensor outer cover and lead terminals: 20 MΩ
min. (at 500 VDC)
Withstand voltage Between Sensor outer cover and lead terminals: 500
VAC, 50/60 Hz min. for 1 min (leakage current: 1 mA
max.)
Connections
D6F-01N2-000
D6F-05N2-000
D6F-02L2-000
Pin No. 1: Vcc
2: Vout
3: GND
Connectors Molex 51021
Terminals Molex 50079
Wires AWG26 or AWG28
Enlarged view
1: Vcc 3: GND
2: Vout
D6F-@N2/-02L2D6F-@N2/-02L2
Dimensions (Unit: mm)
6
21.6±0.5
3-17
22.1±0.5
Two, tapered Rc1/4
pipe threads
0.35
10 10
1. Vcc
2. Vout
Brown wire
Black wire
100±15
200±35
Blue wire 3. GND
8.85
62±0.5
3.7
16.2
Two, M3 screws, Depth: 5 min
37 37±0.05
16.2±0.05 Two, 3.5 dia.
Mounting Hole Dimensions
D6F-01N2-000
D6F-05N2-000
D6F-02L2-000
Lead Wires (Included)
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. A180-E1-01
Printed in Japan
0109
OMRON Corporation
Electronic Components Company
Semiconductor Division H.Q.
Micro Devices Division
686-1 Ichimiyake, Yasu,
Shiga, 520-2326 JAPAN
Tel: (81)77-587-7486/Fax: (81)77-587-7503
