S2H1 Frequency Range (min) Insertion Loss (max) VSWR (max) Isolation (min) Switching speed (max) CW RF power, operating (max) 0.01 - 0.1 0.9 1.5 80 250 1 NOTES: DC Bias: (Standard) +5V +/-0.5V @ 80mA max -15V +/-3V @ 50mA max DC Bias: (-5 option) +5V +/-0.5V @ 100mA max -5V +/-0.5V @ 60mA max DC Bias: (-12 option) +15V +/-3V @ 80mA max -15V +/-3V @ 50mA max Control: (Standard) TTL 0 = Low Loss TTL 1 = Isolation SWITCH SINGLE-POLE, SINGLE-THROW ABSORPTIVE GHz dB ratio dB nsec W MECHANICAL SPECIFICATIONS: Case Styles: S2 Outline (Two bit control) S2-1 Outline (Single bit control) Finish: Gold plate per MIL-G-45204, Chem film per MIL-C-5541 Connectors: SMA Female per MIL-C-39012 Bias & Control Pins: o0.02" x 0.15" long Weight: 20g max Mounting: o0.10" through holes (4) places E1 controls J2 - J1 E2 controls J3 - J1 Single Bit Control: E1=0: J2 - J1 low loss, J3 - J1 isolation (E2=N/C) (-1 option) E1=1: J3 - J1 low loss, J2 - J1 isolation (E2=N/C) Absorptive switch: Internal 50 terminations at J2 and J3 (in isolation mode). Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off). ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -55C to +85C Storage Temp: -65C to +125C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SCREENING: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Hermetically-sealed switches are fine and gross leak checked per MIL-STD-883, Method 1014. J1 J1 DC: J3 WWYY OUTLINE CASE STYLE S2 G N/C E1 J2 SN: 0000 +V -V G E1 E2 ACC DC: J3 WWYY +V -V ACC J2 SN: 0000 OUTLINE CASE STYLE S2-1 PART NUMBER ORDERING INFORMATION: Add "-RC" suffix: RoHS-compliant Add "-5" suffix: +/-5V DC supplies Add "-5-RC" suffix: +/-5V DC supplies, RoHS-compliant Add "-12" suffix: +/-12V to 18V DC supplies Add "-12-RC" suffix: +/-12V to 18V DC supplies, RoHS-compliant Add "-1": Single bit logic control Add "-1-RC" suffix: Single bit logic control, RoHS-compliant Add "-1-5" suffix: Single bit logic control, +/-5V DC supplies Add "-1-5-RC" suffix: Single bit logic control, +/-5V DC supplies, RoHS-compliant Add "-1-12" suffix: Single bit logic control, +/-12V to 18V DC supplies Add "-1-12-RC" suffix: Single bit logic control, +/-12V to 18V DC supplies, RoHS-compliant Add "-H" suffix: Hermetic seal (does not apply to RoHS-compliant models) 1209 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com