Thin Film, Rectangular, Resistor Chips
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 20028
202 Revision: 08-Jan-09
M10, M11, M12, M25
Vishay Draloric
Not for New Designs,
alternatively please use TNPW e3
FEATURES
•Metal film layer on high quality ceramic
•Protective top coat
•Pure tin on nickel barrier layer
•Low temperature coefficient and tight tolerances
•56 days at 40 °C and 93 % relative humidity down to
≤ ± 0.2 %
Notes:
•Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
•Marking: 4 digits, M10 - no marking
Notes:
(1) Measuring conditions in acc. with EN 140 401-801
(2) Rated voltage:
RoHS
COMPLIANT
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE POWER RATING
P70 °C LIMITING ELEMENT
VOLTAGE MAX.
V≅
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
Ω
E-SERIES
INCH METRIC EN 140
401-801 EIA
575
M10 0402 1005 0.063 0.063 25 ± 25 ± 0.5; ± 1 10R - 20K
24 - 96
± 50 ± 0.5 10R - 20K
M11 0603 1608 0.1 0.063 75 ± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 56K
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 56K
M12 0805 2012 0.125 0.1 150 ± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 100K
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 100K
M25 1206 3216 0.25 0.125 200 ± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 220K
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 220K
TECHNICAL SPECIFICATIONS
PARAMETER UNIT M10 M11 M12 M25
Rated Dissipation at 70 °C
(EN 140 401-801| EIA 575) W 0.063 0.1 0.063 0.125 0.1 0.25 0.125
Limiting Element Voltage (2) V≅25 75 150 200
Insulation Voltage (1 min) Vdc/ac peak > 50 > 100 > 200 > 300
Thermal Resistance (1) K/W ≤ 870 (1) -≤ 550 (1) -≤ 440 (1) -≤ 220 (1) -
Insulation Resistance Ω> 10 9
Category Temperature Range °C - 55 to + 125 (+ 155)
Failure Rate h-1 0.3 x 10- 9
Weight/1000 pieces g 0.65 2 5.5 10
P x R
Document Number: 20028 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 08-Jan-09 203
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
Not for New Designs,
alternatively please use TNPW e3
DIMENSIONS
Notes:
(1) Please refer to table PACKAGING, page 146
(2) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
SIZE DIMENSIONS [in millimeters]
INCH METRIC L W H T1 T2
0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.1 0.2 ± 0.1
0603 1608 1.55 0.85 ± 0.1 0.45 ± 0.05 0.30 ± 0.2 0.3 ± 0.2
0805 2012 2.0 1.25 ± 0.15 0.45 ± 0.05 0.30 0.3 ± 0.2
1206 3216 3.2 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2
SOLDER PAD DIMENSIONS [in millimeters]
SIZE REFLOW WAVE SOLDERING
INCH METRIC a b l a b l
0402 1005 0.4 0.6 0.5
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.4 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBERING: M1004020D5620DP000
MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACK AGING (1) SPECIAL
M100402
M110603
M120805
M251206
0 = Neutral D = ± 25 ppm/K
C = ± 50 ppm/K
3 digit value
1 digit multiplier
Multiplier
8 = *10- 2
9 = *10- 1
0 = *100
1 = *101
2 = *102
3 = *103
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
P0
P1
P5
PN
PZ
Up to 2 digits
00 = standard
PRODUCT DESCRIPTION: M10 25 562R 0.5 % P0
M10 25 562R 0.5 % P0
MODEL TCR RESISTANCE VALUE TOLERANCE PAC K AG I N G (1)
M10
M11
M12
M25
± 25 ppm/K
± 50 ppm/K
49K9 = 49.9 kΩ
5R1 = 5.1 Ω
± 0.1 %
± 0.25 %
± 0.5 %
± 1 %
P0
P1
P5
PN
PZ
+ 0.10
- 0.05
+ 0.20
- 0.10
+ 0.10
- 0.20
+ 0.20
- 0.10
M 01 0 0 4 0 2 0 D 5 6 2 0 D P 0 0
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 20028
204 Revision: 08-Jan-09
M10, M11, M12, M25
Vishay Draloric Thin Film, Rectangular, Resistor Chips
Not for New Designs,
alternatively please use TNPW e3
Note:
(1) For ≤ TCR 25 ppm/K and Tolerance ≤ 0.1 % only
PACKAGING
MODEL
REEL
TAPE WIDTH DIAMETER PIECES/REEL PACKING CODE
PAPER
M10 8 mm 180 mm/7"
330 mm/13"
10 000
50 000
P0
PZ
M11
M12
M25
8 mm
180 mm/7"
180 mm/7"
330 mm/13"
1000 (1)
5000
20 000
P1
P5
PN
Temperature Rise
90
80
70
60
50
40
30
20
10
0
0 0.1 0.2 0.3 0.4 0.5
Power in W
0402 1206
0805 0603
Temperature in Rise in °C
Derating
120
100
80
60
40
20
0
- 55 -25 0 25 50 75 100 125 150 175
Ambient Temperature in °C
70
Rated Power
i
n %
120
11 0
100
90
80
70
60
10 100 1K 10K 100K
Non-Linearity
Non-Linearity A
3
in dB
Resistance Value in W
M1 0
M2 5
M1 2
M1 1
3
2
1
Current Noise
Current Noise in µV/V
Resistance Value in W
0.5
0.3
0.1
0.01
0.03
0.05
100 1K 10K 100K 1M
M10 M11 M12 M25
Document Number: 20028 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 08-Jan-09 205
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
Not for New Designs,
alternatively please use TNPW e3
60
40
20
0
- 20
- 40
- 60
-80
HF Performance
sahPe
Angleni °ϑ
Frequency f in MHz
2 5 10 50 100 500 1000
10K Ω
4.75K Ω
1K Ω
100 Ω
10 Ω
M11
60
40
20
0
- 20
- 40
- 60
-80
HF Performance
2 5 10 50 100 500 1000
OR-]Z[ ni %
O
R
10 Ω
100 Ω100 Ω100 Ω100 Ω
100 Ω
1K Ω
4.75K Ω
10K Ω
M11
60
40
20
0
- 20
- 40
- 60
-802 5 10 50 100 500 1000
M12
10 Ω
100 Ω
1K Ω
10K Ω
60
40
20
0
- 20
- 40
- 60
-802 5 10 50 100 500 1000
10 Ω
100 Ω
1K Ω
M12
10K Ω
1K
100
10
Single-Pulse High Voltage Overload Test
1.2/50 µs EN140000 4.27
Test Voltage in V
Resistance Value in Ω
10R 100R 1K 10K 100K
3K
M12
M11
1K
100
1010R 100R 1K 10K 100K
3K
M12
M11
Frequency f in MHz
HF Performance
sahPe
Angleni °ϑ
Frequency f in MHz
HF Performance
OR-]Z[ ni %
O
R
Frequency f in MHz
Single-Pulse High Voltage Overload Test
10/700 µs EN140000 4.27
Resistance Value in Ω
Test Voltage in V
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 20028
206 Revision: 08-Jan-09
M10, M11, M12, M25
Vishay Draloric Thin Film, Rectangular, Resistor Chips
Not for New Designs,
alternatively please use TNPW e3
ASSEMBLY
The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the
whole system.
10
1
0.1
10-5 10-4 10-3 10-2 10-1 110
100
0.01
Pulse Rating P 0
Secondary conditions:
a) P 0 (peak pulse, single pulse)
b) ϑu ≤ 70 ° C
c) Umax see diagram (Max pulse voltage)
M25
M10
M12
M11
Power Rating P in W
Square Pulse ti in s
1
0.1
10
-5
10
-4
10
-3
10
-2
10
-1
110
0.01
Pulse Rating P ≤ P70
10
100
Secondary conditions:
a) P ≤ P70 (permissible constant power at ϑu = 70 ° C)
b) ϑu ≤ 70 ° C
c) Umax see diagram (Max pulse voltage)
M10
M11
M12
M25
Power Rating P in W
Square Pulse ti in s
Square Pulse ti in s
10-5 10-4 10-3 10-2 10-1 110
Maximum Pulse Voltage
1000
Pulse Voltage
Ü
max in V
800
600
400
200
0
M25
M12
M11
M10
Secondary conditions:
a) P see diagram (pulse Rating)
b) ϑu ≤ 70 ° C
Document Number: 20028 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 08-Jan-09 207
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
Not for New Designs,
alternatively please use TNPW e3
PERFORMANCE
TEST CONDITIONS OF TEST
TEST RESULTS
TOLERANCES
± 0.1 %/± 0.25 % ± 0.5 %/± 1.0 %
Endurance Test at 70 °C
IEC 60115-1 4.25.1 1000 h at 70 °C, 1.5 h “ON”, 0.5 h “OFF” ≤ ± 0.2 % ≤ ± 0.5 %
Endurance at UCT
IEC 60115-1 4.25.3 1000 h at 125 °C without load ≤ ± 0.2 % ≤ ± 0.5 %
Overload Test
IEC 60115-1 4.13
Short time overload for 2 s
2.5 x rated voltage or ≤ 2 x limiting element voltage ≤ ± 0.05 % ≤ ± 0.1 %
Thermal Shock
IEC 60115-1 4.19, IEC
60068-2-14
Rapid change between upper and lower
category temperature ≤ ± 0.05 % ≤ ± 0.1 %
Damp Heat Steady State
IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40 °C and 93 % relative humidity ≤ ± 0.2 % ≤ ± 0.5 %
Resistance to Soldering Heat
IEC 60115-1 4.18, IEC 60068-2-20 10 s at 260 °C solder bath temperature ≤ ± 0.05 % ≤ ± 0.2 %
APPLICABLE SPECIFICATIONS
• CECC40000/40400/40401-801
• EN140400/IEC 60115 - 1/EN 140 401-801
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
