SMPS Capacitors (SK Style) Commercial Radial Range PRODUCT OFFERING - C0G, X7R AND Z5U AVX SK styles are conformally coated MLC capacitors for input or output filtering in switch mode power supplies. They are specially processed to handle high currents and are low enough in cost for commercial SMPS application. ELECTRICAL SPECIFICATIONS Temperature Coefficient C0G: A Temperature Coefficient - 0 30 ppm/C, -55 to +125C X7R: C Temperature Coefficient - 15%, -55 to +125C Z5U: E Temperature Coefficient - +22, -56%, +10 to +85C Capacitance Test (MIL-STD-202 Method 305) C0G: 25C, 1.00.2 Vrms (open circuit voltage) at 1KHz X7R: 25C, 1.00.2 Vrms (open circuit voltage) at 1KHz Z5U: 25C, 0.5 Vrms max (open circuit voltage) at 1KHz Dissipation Factor 25C C0G: 0.15% Max @ 25C, 1.00.2 Vrms (open circuit voltage) at 1KHz X7R: 2.5% Max @ 25C, 1.00.2 Vrms (open circuit voltage) at 1KHz Z5U: 3.0% Max @ 25C, 0.5 Vrms max (open circuit voltage) at 1KHz Insulation Resistance 25C (MIL-STD-202 Method 302) C0G and X7R: 100K M or 1000 M-F, whichever is less. Z5U: 10K M or 1000 M-F, whichever is less. Insulation Resistance 125C (MIL-STD-202 Method 302) C0G and X7R: 10K M or 100 M-F, whichever is less. Z5U: 1K M or 100 M-F, whichever is less. Dielectric Withstanding Voltage 25C (Flash Test) C0G and X7R: 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 750 VDC) Z5U: 200% rated voltage for 5 seconds with 50 mA max charging current. Life Test (1000 hrs) C0G and X7R: 200% rated voltage at +125C. (500 Volt units @ 600 VDC) Z5U: 150% rated voltage at +85C Moisture Resistance (MIL-STD-202 Method 106) C0G, X7R, Z5U: Ten cycles with no voltage applied. Thermal Shock (MIL-STD-202 Method 107, Condition A) Immersion Cycling (MIL-STD-202 Method 104, Condition B) Resistance To Solder Heat (MIL-STD-202, Method 210, Condition B, for 20 seconds) HOW TO ORDER SK Style 01 Size See chart below 3 E 125 Voltage 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 Temperature Coefficient Z5U = E X7R = C C0G = A Capacitance Code (2 significant digits + no. of zeros) 22 nF = 223 220 nF = 224 1 F = 105 100 F = 107 Note: Capacitors with X7R and Z5U dielectrics are not intended for applications across AC supply mains or AC line filtering with polarity reversal. Contact plant for recommendations. TAPE & REEL QUANTITY Z A A * Test Capacitance Leads Packaging Level Tolerance A = Tin/Lead (See Note 1) C0G: J = 5% A = Standard R = RoHS K = 10% Compliant B = Hi-Rel* M = 20% Note 1: No suffix signifies bulk packaging, X7R: K = 10% which is AVX standard packaging. M = 20% SK01, SK*3, SK*4, SK*5, SK*6, SK*9 Z = +80, -20% & SK*0 are available taped and reel Z5U: Z = +80, -20% per EIA-468. Use suffix "TR1" if tape & reel is required. P = GMV (+100, -0%) *Hi-Rel screening for C0G and X7R only. Screening consists of 100% Group A (B Level), Subgroup 1 per MIL-PRF-49470. RoHS Part SK01 Pieces 2000 Part SK01 Available Yes SK03/SK53 1000 SK03/SK53 Yes SK04/SK54 1000 SK04/SK54 Yes SK05/SK55 500 SK05/SK55 Yes SK06/SK56 500 SK06/SK56 Yes SK07 N/A SK07 No SK08 N/A SK08 No SK09/SK59 500 SK09/SK59 Yes SK10/SK60 400 SK10/SK60 Yes 43 SMPS Capacitors (SK Style) Product Offering - C0G, X7R and Z5U L L L H H T H H + 3.683 (0.145) M M M LL LL LL LD LD LD LS LS SK01 LS SK03 - SK10 SK53 - SK56 and SK59 - SK60 C0G Capacitance Range (F) Style 25 WVDC 50 WVDC SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 min./max. .001/0.015 .01/0.056 .01/0.12 .01/0.18 .10/0.56 .10/0.68 .82/1.20 .10/0.27 .10/0.68 min./max. .001/0.012 .01/0.047 .01/0.10 .01/0.15 .01/0.47 .01/0.56 .68/1.10 .01/0.22 .01/0.56 100 WVDC 200 WVDC X7R Capacitance Range (F) 500 WVDC min./max. min./max. min./max. .001/0.010 .0010/0.0056 .0010/0.0018 .01/0.039 .001/0.022 .001/0.0068 .01/0.082 .01/0.047 .001/0.015 .01/0.12 .01/0.068 .001/0.022 .01/0.39 .01/0.22 .01/0.068 .01/0.47 .01/0.27 .01/0.082 .56/0.82 .33/0.47 .10/0.15 .01/0.18 .01/0.10 .001/0.039 .01/0.47 .01/0.27 .01/0.082 Style 25 WVDC 50 WVDC 100 WVDC 200 WVDC 500 WVDC SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 min./max. .01/0.39 .10/2.2 .10/4.7 .10/6.8 1.0/15 1.0/18 22/33 .10/8.2 1.0/18 min./max. .01/0.33 .10/1.8 .10/3.3 .10/6.8 1.0/10 1.0/14 15/22 .10/5.6 1.0/12 min./max. .01/0.27 .01/1.5 .10/2.7 .10/3.9 .10/5.6 1.0/8.2 10/15 .10/3.3 .10/6.8 min./max. .01/0.12 .01/0.68 .01/1.0 .10/1.8 .10/3.9 .10/4.7 5.6/8.2 .10/2.2 .10/4.7 min./max. .001/0.033 .01/0.18 .01/0.33 .01/0.56 .10/1.2 .10/1.8 2.2/3.3 .10/1.0 .10/1.5 Z5U Capacitance Range (F) Style 25 WVDC 50 WVDC SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 min./max. .10/1.2 .10/5.6 1.0/10.0 1.0/18.0 1.0/47.0 1.0/68.0 82/120.0 1.0/27.0 1.0/56.0 min./max. .10/0.82 .10/3.30 1.0/8.20 1.0/10.00 1.0/39.00 1.0/47.00 56/100.00 1.0/18.00 1.0/39.00 100 WVDC 200 WVDC min./max. .10/0.47 .10/2.20 .10/4.70 1.0/6.80 1.0/22.00 1.0/27.00 33/47.00 1.0/10.00 1.0/22.00 min./max. .10/0.33 .10/1.50 .10/3.30 .10/4.70 1.0/15.00 1.0/18.00 22/33.00 1.0/6.80 1.0/18.00 DIMENSIONS Style SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 L = Length H = Height 44 millimeters (inches) L (max.) 5.08 (0.200) 7.62 (0.300) 10.2 (0.400) 12.7 (0.500) 22.1 (0.870) 27.9 (1.100) 27.9 (1.100) 17.0 (0.670) 23.6 (0.930) H (max.) 5.08 (0.200) 7.62 (0.300) 10.2 (0.400) 12.7 (0.500) 15.2 (0.600) 15.2 (0.600) 15.2 (0.600) 13.7 (0.540) 18.3 (0.720) T = Thickness M = Meniscus 1.52 (0.060) max. T (max.) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 8.89 (0.350) 5.08 (0.200) 6.35 (0.250) LS (nom.) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 10.2 (0.400) 20.1 (0.790) 24.9 (0.980) 24.9 (0.980) 14.6 (0.575) 20.3 (0.800) LD (nom.) 0.508 (0.020) 0.508 (0.020) 0.508 (0.020) 0.635 (0.025) 0.813 (0.032) 0.813 (0.032) 0.813 (0.032) 0.635 (0.025) 0.813 (0.032) LS = Lead Spacing Nominal .787 (0.031) LL = Lead Length 50.8 (2.000) max./25.4 (1.000) min. LD = Lead Diameter Nominal .050 (0.002)