F12_FFE (1/1) Piezoelectronic Products FFE Series FFE1070 Type Ceramic Filters Lead CERAMIC FILTERS 10.7MHz FEATURES * Color-coded center frequency rankings enable non-adjustable IF circuit implementations. * Large attenuation and superior temperature characteristics ensure high IF circuit stability (center frequency temperature coefficient: 0 to 15 ppm/C). SHAPES AND DIMENSIONS FFE-MA, -NA 7(6.5)max. Color code of center frequency 4(2.5)max. 8(7.8)max. 5+0.5, -1 7.5(7)max. 5+0.5, -1 7(6.5)max. Color code of center frequency FFE-MS, -MJ 107MA TDK 2.50.3 2.50.3 o0.550.1 4(3)max. 107MS TDK 2.50.3 2.50.3 o0.550.1 Fig. 1 Fig. 2 ( ) are typical values. Dimensions in mm ELECTRICAL CHARACTERISTICS STANDARD TYPE/LOW-LOSS TYPE 3dB bandwidth (kHz) 28050 23050 18040 15040 Type FFE1070MA FFE1070NA FFE1070MS FFE1070MJ 20dB bandwidth (kHz)max. 600(500) 570(430) 520(400) 400(310) Insertion loss (dB)max. 6(2.5) 6(2.5) 7(3.5) 10(4) Spurious attenuation (dB)min.[9 to 12MHz] 35(43) 35(43) 35(44) 35(45) Fig. 1 2 * ( ) are typical values. TAPING SPECIFICATIONS h 1 P1 F2 d oD 0 W W2 W0 P0 W1 F1 H0 H1 P 0 h 2 h1 0 h 2 Dimensions in mm Type FFE1070 P 12.71 12.71 P01 P1 6.351.3 F1, F22 2.50.3 W 18+1, -0.5 W0 11.5min. W1 90.5 W2 5max. H03 160.5(18+1.5, -0) oD0 o40.2 h1, h24 2max. d 0.550.1 H1 25max. 1 The cumulative pitch tolerance is 1mm at 20 pitches. 2 The measurement position is the top of the tape and between the leads. 3 The product with this dimension is also available. 4 The measurement position is at a product of the top. F12_FFE 990901 Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.