SLUS581 - FEBRUARY 2004 FEATURES D Power Monitoring and Switching for D D D D D D D DESCRIPTION The CMOS bq2205 SRAM non-volatile controller with reset provides all the necessary functions for converting one or two banks of standard CMOS SRAM into non-volatile read/write memory. Non-Volatile Control of SRAMs Input Decoder Allows Control of 1 or 2 Banks of SRAM Write-Protect Control 3-V Primary Cell Input 3.3-V Operation Reset Output for System Power-On Reset Less than 20-ns Chip Enable Propagation Delay Small 16-Lead TSSOP Package A precision comparator monitors the 3.3-V VCC input for an out-of-tolerance condition. When out-of-tolerance is detected, the two conditioned chip-enable outputs are forced inactive to write-protect both banks of SRAM. Power for the external SRAMs, VOUT, is switched from the VCC supply to the battery-backup supply as VCC decays. On a subsequent power-up, the VOUT supply is automatically switched from the backup supply to the VCC supply. The external SRAMs are write-protected until a power-valid condition exists. The reset output provides power-fail and power-on resets for the system. During power-valid operation, the input decoder, A, selects one of two banks of SRAM. APPLICATIONS D NVSRAM Modules D Point-of-Sale Systems D Facsimile, Printers and Photocopiers D Internet Appliances D Servers D Medical Instrumentation and Industrial Products Main Supply From Address Selector VCC bq2205LYPW VCC VDC 12 VCC BW GND 1 RST 16 Backup Supply A 11 CE VDC 9 BCP GND 4 VSS 5 VSS 8 VSS 15 To Microprocessor VCC VOUT 13 CECON1 10 VCC VCC CE CE SRAM Bank 1 Pushbutton Reset (Optional) SRAM Bank 2 CECON2 14 UDG-03129 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. !"#$%! & '("")% $& ! *(+'$%! ,$%) "!,('%& '!!"# %! &*)''$%!& *)" %-) %)"#& ! ).$& &%"(#)%& &%$,$", /$""$%0 "!,('%! *"!')&&1 ,!)& !% )')&&$"+0 '+(,) %)&%1 ! $++ *$"$#)%)"& Copyright 2004, Texas Instruments Incorporated www.ti.com 1 SLUS581 - FEBRUARY 2004 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ORDERING INFORMATION TA -20C to 70C OPERATION PART NUMBER(1) SYMBOL 3.3 V bq2205LYPW bq2205LY (1) The PW package is available taped and reeled. Add an R suffix to the device type (i.e. bq2205LYPWR) to order quantities of 2,000 devices per reel. ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range unless otherwise noted(2) bq2205LY Input voltage range VCC, (wrt VSS) BCP, (wrt VSS) all other pins, (wrt VSS) UNIT -0.3 to 6.0 -0.3 to 4.5 V -0.3 to VCC + 0.3 Operating temperature range, TA -20 to 70 Storage temperature, Tstg -55 to 125 Temperature under bias, TJbias -40 to 85 C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 300 (2) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS MIN Supply voltage, VCC Supply voltage from backup cell, VBC 2 MAX 3.0 3.6 2.0 4.0 Low-level input voltage, VIL -0.3 0.8 High-level input voltage, VIH 2.2 VCC + 0.3 0.4 RST low-level input voltage, VIL -0.3 RST high-level input voltage, VIH 2.2 Operating temperature range, TA -20 www.ti.com VCC + 0.3 70 UNIT V C SLUS581 - FEBRUARY 2004 ELECTRICAL CHARACTERISTICS (TA = 25C, VCC(min) VCC VCC(max) unless otherwise noted) PARAMETER TEST CONDITIONS VCC supply current, ICC(vcc) VCC > VCC(MIN) CE = low CECONX = 0 mA Backup Battery Supply Current, ICC(BC) VBC > VBC(MIN), VCC = 0 V CE = low CECONX = 0 mA Output voltage (VOUT) I(VOUT) = 80 mA, VCC > V(SO) I(VOUT)= 100 A, VCC < V(SO) Power fail detect voltage, VPFD MIN TYP MAX UNIT 210 500 A 50 150 nA 2.9 2.95 Vcc-0.3 VBC-0.3 2.85 Supply switch-over voltage, VSO VBC > V(PFD) VBC < V(PFD) RST output voltage I(RST) = 1 mA 0.4 BW output voltage I(BW)= 1 mA 0.4 Input leakage current on A and CE pins VPFD VBC -1 1 Voh CEcon1,2 Ioh = 0.5 mA 2.4 Vol CEcon1,2 Iol = 2.0 mA (1) 0.4 Battery warning level VBW V A V 0.677xVCC Capacitance Output capacitance VOUT = 0 V 7 Input capacitance VOUT = 0 V 5 pF Power-Down and Power-Up Timing, Refer to Figure 1 through 3 VCC slew rate fall time, tF 3.0 V to 0.0 V 300 VCC slew rate rise time, tR VSO to VPFD(max) 100 VPFD to RST active, tRST (reset active timeout period) Chip-enable recovery time, tCER ss 30 85 30 85 ms (2) Chip-enable propagation delay time to external See Figure 2 15 25 ns SRAM, tCED Push-button low time, tPBL RST pin 1 s (1) Battery warning level is detected on power up and the BW pin is latched at tCER time after VCC passes through VPFD on power up. (2) Time during which external SRAM is write protected after VCC passes through VPFD on power up. www.ti.com 3 SLUS581 - FEBRUARY 2004 AC TEST CONDITIONS, INPUT PULSE LEVELS 0 V VIN 3 V, tR = tF = 5 NS TTL CECONX CL (including scope and JIG) Figure 1. Output Load tF tR VCC VPFD(max) VPFD VCC VPFD VSO VSO tCED tCER tCED CE CECONX tRST RST Figure 2. Power-Down/Power-Up Timing Diagram tPBL RST tRST VPBRH VPBRL Figure 3. Push-Button Reset Timing 4 www.ti.com SLUS581 - FEBRUARY 2004 TERMINAL FUNCTIONS TERMINAL NAME A bq2205LY 1 I/O DESCRIPTION I SRAM bank select input BCP 9 I Backup supply input BW 15 O Battery warning output (open-drain) CE 11 I Chip enable input (active low) CECON1 CECON2 10 O Conditioned chip enable output 1 14 O Conditioned chip enable output 2 N/C 2, 3, 6, 7 - No connect. These pins must be left floating. RST 16 O Power-up reset to system CPU output (open-drain) VCC VOUT 12 I Main supply input 13 O SRAM supply output 4, 5, 8 - Ground input VSS PW PACKAGE (TOP VIEW) A N/C N/C VSS VSS N/C N/C VSS 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 RST BW CECON2 VOUT VCC CE CECON1 BCP N/C no connection www.ti.com 5 SLUS581 - FEBRUARY 2004 FUNCTIONAL DESCRIPTION Two banks of CMOS static RAM can be battery-backed using the VOUT and conditioned chip-enable output pins from the bq2205. As the voltage input VCC slews down during a power failure, the two-conditioned chip enable outputs, CECON1 and CECON2, are forced inactive independent of the chip enable input, CE. This activity unconditionally write-protects the external SRAM as VCC falls to an out-of-tolerance threshold VPFD. As the supply continues to fall past VPFD, an internal switching device forces VOUT to the backup energy source. CECON1 and CECON2 are held high by the VOUT energy source. During power-up, VOUT is switched back to the 3.3-V supply as VCC rises above the backup cell input voltage sourcing VOUT. Outputs CECON1 and CECON2 are held inactive for time tCER after the power supply has reached VPFD, independent of the CE input, to allow for processor stabilization. During power-valid operation, the CE input is passed through to one of the two CECONx outputs with a propagation delay of less than tCED. The CE input is output on one of the two CECONx output pins; depending on the level of bank select input A. See truth table below. Table 1. Truth Table INPUT CE OUTPUT A H x CECON1 H CECON2 H L L L H L H H L Bank select input A is usually tied to a high-order address pin so that a large nonvolatile memory can be designed using lower-density memory devices. Non-volatility and decoding are achieved by hardware hookup as shown in the application diagram. The RST output can be used as the power-on reset for a microprocessor. Access to the external RAM may begin when RST returns inactive. BATTERY BACKUP INPUT Backup energy source, BCP, input is provided on the bq2205 for use with an external primary cell. The primary cell input is designed to accept any 3-V primary battery (non-rechargeable), typically some type of lithium chemistry. Power-Down and Power-Up Cycle The bq2205 continuously monitors VCC for out-of-tolerance. During a power failure, when VCC falls below VPFD, the bq2205 write-protects the external SRAM. The power source is switched to BCP when VCC is less than VPFD and BCP is greater than VPFD, or when VCC is less than BCP and BCP is less than VPFD. When VCC is above VPFD, the power source is VCC. Write-protection continues for tCER time after VCC rises above VPFD. An external CMOS static RAM is battery-backed using the VOUT and chip enable output pins from the bq2205. As the voltage input VCC slews down during a power failure, the chip enable output, CECONx, is forced inactive independent of the chip enable input CE. As the supply continues to fall past VPFD, an internal switching device forces VOUT to the external backup energy source. CECONx is held high by the VOUT energy source. 6 www.ti.com SLUS581 - FEBRUARY 2004 FUNCTIONAL DESCRIPTION During power up, VOUT is switched back to the main supply as VCC rises above the backup cell input voltage sourcing VOUT. If VPFD < BCP on the bq2205 the switch to the main supply occurs at VPFD. CECONx is held inactive for time tCER after the power supply has reached VPFD, independent of the CE input, to allow for processor stabilization. Power-On Reset The bq2205 provides a power-on reset, which pulls the RST pin low on power down and remains low on power up for tRST after VCC passes VPFD. With valid battery voltage on BCP, RST remains valid for VCC = VSS. The pull-up resistor on this pin should not exceed 10 k if a push button reset is used. Battery Low Warning The bq2205 checks the battery voltage on power-up. The threshold for the battery warning comparator is VBW, and a low level is sensed after power valid on each power up and latched after tCER time. The latched value is presented at BW pin where a low indicates a low battery. APPLICATION INFORMATION PCB LAYOUT INFORMATION It is important to pay special attention to the PCB layout. The following provides some guidelines: D To obtain optimal performance, the decoupling capacitor from input terminals to VSS should be placed as close as possible to the bq2205, with short trace runs to both signal and VSS pins. D All low-current VSS connections should be kept separate from the high-current paths from the inputs supplies. Use a single-point ground technique incorporating both the small signal ground path and the power ground path. www.ti.com 7 SLUS581 - FEBRUARY 2004 MECHANICAL DATA PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. 8 All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 www.ti.com PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty BQ2205LYPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM BQ2205LYPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM BQ2205LYPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM BQ2205LYPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device BQ2205LYPWR Package Package Pins Type Drawing TSSOP PW 16 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2000 330.0 12.4 Pack Materials-Page 1 6.9 B0 (mm) K0 (mm) P1 (mm) 5.6 1.6 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) BQ2205LYPWR TSSOP PW 16 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated