MC Power Series BOOSTCAP(R) Ultracapacitors p > Series: MC Power Round, Terminal Type Ultralow low internal resistance Ultra internal resistance Highest performance available Highestpower power performance available Lowest constant LowestRC RCtime time constant Features: 2.7 Volt Operating Voltage Ultra low internal resistance Over 1 million duty cycles Highest power performance available Lowest RC time constant Threaded terminal or weldable post versions > Applications: Hybrid drive trains Automotive subsystems Transportation Rail system power > Overview: The Power-type ultracapacitor product line gives customers in the automotive and transportation sector a much wider range of choices to meet their energy storage and power delivery requirements. The cells are specifically engineered for hybrid vehicle drive trains, automotive subsystems and other heavy duty applications that require the lowest equivalent series resistance (ESR) and highest efficiency available. In addition to meeting or exceeding demanding automotive and transportation application requirements for both watt-hours of energy storage and watts of power delivery per kilogram, all of these products will perform reliably for more than one million discharge-recharge cycles. The proprietary architecture and material science on which BOOSTCAP(R) products are based enable continued leadership in controlling costs, flexibility in product offerings and allow application specific performance tailoring. The cells operate at 2.7 volts, enabling them to store more energy and deliver more power per unit volume than any other commercially available ultracapacitor products. MC Power Series BOOSTCAP(R) Ultracapacitors | Page 1 | Doc. # 1009361 | Rev. 9 | MC Power Series BOOSTCAP(R) Ultracapacitors > MC Power Series Specifications: Item Performance Operating Temperature Range -40 C to +65 C Storage Temperature Range -40 C to +70 C Rated Voltage 2.7 V DC Capacitance Tolerance +20% / -5% Resistance Tolerance Max. Temperature Characteristics Capacitance Change Within 5% of initial measured value at 25 C ( at -40 C) Internal Resistance Within 150% of initial measured value at 25 C (at -40 C) After 1500 hours application of rated voltage at 65 C Endurance Shelf Life Capacitance Change Within 20% of initial specified value Internal Resistance Within 60% of initial specified value After 1500 hours storage at 65 C without load shall meet specification for endurance After 10 years at rated voltage and 25 C Life Test Cycle Test > Within 30% of initial specified value Internal Resistance Within 150% of initial specified value Capacitors cycled between specified voltage and half rated voltage under constant current at 25 C (1 million) Capacitance Change Within 30% of initial specified value Internal Resistance Within 150% of initial specified value MC Power Product Specifications: Capacitance (F) ESR, DC (mohm) ESR, 1khz (mohm) Ic (mA) BCAP0650 P270 650 0.80 0.60 1.5 BCAP1200 P270 1200 0.58 0.44 2.7 BCAP1500 P270 1500 0.47 0.35 3.0 BCAP2000 P270 2000 0.35 0.26 4.2 BCAP3000 P270 3000 0.29 0.24 5.2 Part Number > Capacitance Change MC Power Product Properties: Rth (C/W) Isc (A) Emax (Wh/kg) Pmax (W/kg) Pd (W/kg) BCAP0650 P270 6.5 3500 3.29 15,100 5,400 BCAP1200 P270 5.3 3750 4.05 13,800 5,000 BCAP1500 P270 4.5 3900 4.75 16,200 5,800 BCAP2000 P270 3.8 4300 5.06 17,500 6,200 BCAP3000 P270 3.2 4800 5.52 13,800 5,400 Maxwell Part No. MC Power Series BOOSTCAP(R) Ultracapacitors | Page 2 | Doc. # 1009361 | Rev. 9 | MC Power Series BOOSTCAP(R) Ultracapacitors > Dimensions: H L H 25 D2 O 22.4 .125 Part Number Vol (I) Post Version M12 x 1.75 Mass (kg) M12 x 1.75 D1 Size (mm) L H D1 D2 (0.5mm) (0.2mm) (0.7mm) BCAP0650 P270 T04 BCAP1200 P270 T04 BCAP1500 P270 T04 BCAP2000 P270 T04 0.211 0.294 0.325 0.373 0.20 0.30 0.32 0.40 51.5 0.5 74.0 0.3 85.0 0.3 102.0 0.3 14.0 14.0 14.0 14.0 60.4 60.4 60.4 60.4 60.7 60.7 60.7 60.7 BCAP3000 P270 T04 0.475 0.55 138.0 0.3 14.0 60.4 60.7 Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. > Mounting Recommendations: Do not reverse polarity. Maximum torque for M12 screw terminals are 10Nm. Cells are designed to be connected into series or parallel strings. Clean terminals before mounting. Worldwide Headquarters European Office Maxwell Technologies 9244 Balboa Avenue * San Diego, 92123 CA, USA PHONE: +(1) 858 503 3300 FAX: +(1) 858 503 3301 EMAIL: info@maxwell.com Maxwell Technologies SA CH-1728 Rossens * Switzerland PHONE: +41 (0) 26 411 85 00 FAX: +41 (0) 26 411 85 05 EMAIL: info@maxwell.com MC Power Series BOOSTCAP(R) Ultracapacitors www.maxwell.com | Page 3 | Doc. # 1009361 | Rev. 9 | MC Power Series BOOSTCAP(R) Ultracapacitors > Dimensions: H 2x O 14 0.013 L H 25 D2 O 22.4 .125 Part Number BCAP0650 P270 T05 BCAP1200 P270 T05 BCAP1500 P270 T05 BCAP2000 P270 T05 BCAP3000 P270 T05 Vol (I) Weldable Version O 14 0.013 Mass (kg) 0.150 0.233 0.264 0.312 0.414 0.20 0.30 0.32 0.40 0.55 O 14 0.013 D1 Size (mm) L 51.5 0.5 74.0 0.3 85.0 0.3 102.0 0.3 138.0 0.3 H D1 D2 (0.125mm) (0.2mm) (0.7mm) 3.18 3.18 3.18 3.18 3.18 60.4 60.4 60.4 60.4 60.4 60.7 60.7 60.7 60.7 60.7 Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. > Markings: Capacitors are marked with the following information - Rated capacitance and rated voltage as well as energy/power type indication in the product naming. Serial number, name of manufacturer, positive and negative terminal, warning marking. > Additional Technical Information: Capacitance and ESR, DC measured per document 1007239 Ic= Leakage current after 72 hours, 25C Rth = Thermal resistance Emax = 1/2 CV 2 3600 x mass lsc = short circuit current (maximum peak current) V2 Pmax = 4R (1khz) mass 0.12V 2 Pd = R (DC) mass Patent Pending Worldwide Headquarters European Office Maxwell Technologies 9244 Balboa Avenue * San Diego, 92123 CA, USA PHONE: +(1) 858 503 3300 FAX: +(1) 858 503 3301 EMAIL: info@maxwell.com Maxwell Technologies SA CH-1728 Rossens * Switzerland PHONE: +41 (0) 26 411 85 00 FAX: +41 (0) 26 411 85 05 EMAIL: info@maxwell.com MC Power Series BOOSTCAP(R) Ultracapacitors www.maxwell.com | Page 4 | Doc. # 1009361 | Rev. 9 | MC Power Series BOOSTCAP(R) Ultracapacitors Disclaimer of Warranty/Limitation of Liability for Uses in Life Support Devices or Critical Systems Maxwell Technologies, Inc. and its Affiliates ("Maxwell") provide no warranties of any kind either express or implied, including (without limitation) the implied warranties of merchantability and fitness, for uses of its products as components in life support devices or critical systems. "Life support devices" are devices or systems, which (a) are intended for surgical implant into a living body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with the instructions provided in the labeling can be reasonably expected to result in bodily injury to the user. An example of a life support device includes, but is not limited to, a heart pacemaker. A "critical system" is any system whose failure to perform can affect the safety or effectiveness of a higher level system, or cause bodily or property injury by loss of control of the higher level device or system. An example of a critical system includes, but is not limited to, aircraft avionics. Maxwell will not be liable to you for any loss or damages, either actual or consequential, indirect, punitive, special, or incidental, arising out of or relating to these terms. Patent Pending Worldwide Headquarters European Office Maxwell Technologies 9244 Balboa Avenue * San Diego, 92123 CA, USA PHONE: +(1) 858 503 3300 FAX: +(1) 858 503 3301 EMAIL: info@maxwell.com Maxwell Technologies SA CH-1728 Rossens * Switzerland PHONE: +41 (0) 26 411 85 00 FAX: +41 (0) 26 411 85 05 EMAIL: info@maxwell.com MC Power Series BOOSTCAP(R) Ultracapacitors www.maxwell.com | Page 5 | Doc. # 1009361 | Rev. 9 |