To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7
September 2014
FOD8320
High Noise Immunity, 2.5A Output Current, Gate Drive
Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Features
■
Fairchild’s Optoplanar
®
Packaging Technology
Provides Reliable and High-Voltage Insulation with
Greater than 10 mm Creepage and Clearance
Distance, and 0.5 mm Internal Insulation Distance
While Still Offering a Compact Footprint
■
2.5 A Output Current Driving Capability for Medium-
Power IGBT/MOSFET
– P-Channel MOSFETs at Output Stage Enables
Output Voltage Swing Close to Supply Rail
■
35 kV/µs Minimum Common Mode Rejection
■
Wide Supply Voltage Range: 15 V to 30 V
■
Fast Switching Speed Over Full Operating
Temperature Range:
– 400 ns Maximum Propagation Delay
– 100 ns Maximum Pulse Width Distortion
■
Under-Voltage Lockout (UVLO) with Hysteresis
■
Extended Industrial Temperate Range: -40°C to 100°C
■
Safety and Regulatory Approvals:
– UL1577, 5,000 V
RMS
for 1 Minute
– DIN EN/IEC60747-5-5, 1,414 V Peak Working
Insulation Voltage
Applications
■
AC and Brushless DC Motor Drives
■
Industrial Inverter
■
Uninterruptible Power Supply
■
Induction Heating
■
Isolated IGBT/Power MOSFET Gate Drive
Related Resources
■
FOD3120, High Noise Immunity, 2.5 A Output
Current, Gate Drive Optocoupler Datasheet
■
www.fairchildsemi.com/products/opto/
Description
The FOD8320 is a 2.5 A output current gate drive
optocoupler, capable of driving medium-power IGBT/
MOSFETs. It is ideally suited for fast-switching driving of
power IGBT and MOSFET used in motor-control inverter
applications and high-performance power systems.
The FOD8320 utilizes Fairchild’s Optoplanar
®
coplanar
packaging technology and optimized IC design to
achieve reliable high-insulation voltage and high-noise
immunity.
It consists of an Aluminum Gallium Arsenide (AlGaAs)
Light-Emitting Diode (LED) optically coupled to an
integrated circuit with a high-speed driver for push-pull
MOSFET output stage. The device is housed in a wide
body, 5-pin, small-outline, plastic package.
Functional Schematic
Figure 1. Schematic
Figure 2. Package Outline
1
3
6
5
4
ANODE
CATHODE VSS
VO
VDD
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 2
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Truth Table
Pin Configuration
Figure 3. Pin Configuration
Pin Definitions
LED V
DD
– V
SS
“Positive Going”
(Turn-on)
V
DD
– V
SS
“Positive Going”
(Turn-off) V
O
Off 0 V to 30 V 0 V to 30 V LOW
On 0 V to 11.5 V 0 V to 10 V LOW
On 11.5 V to 14.5 V 10 V to 13 V Transition
On 14.5 V to 30 V 13 V to 30 V HIGH
Pin # Name Description
1 Anode LED Anode
3 Cathode LED Cathode
4V
SS
Negative Supply Voltage
5V
O
Output Voltage
6V
DD
Positive Supply Voltage
1
3
6
5
4
ANODE
CATHODE VSS
VO
VDD
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 3
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Safety and Insulation Ratings
As per DIN EN/IEC60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol Parameter Min. Typ. Max. Unit
Installation Classifications per DIN VDE 0110/1.89 Table 1
For Rated Mains Voltage < 150 V
RMS
I–IV
For Rated Mains Voltage < 300 V
RMS
I–IV
For Rated Mains Voltage < 450 V
RMS
I–IIII
For Rated Mains Voltage < 600 V
RMS
I–III
Climatic Classification 40/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
CTI Comparative Tracking Index 175
V
PR
Input-to-Output Test Voltage, Method b, V
IORM
x 1.875 = V
PR
,
100% Production Test with t
m
= 1 s, Partial Discharge < 5 pC 2651 V
peak
Input-to-Output Test Voltage, Method a, V
IORM
x 1.6 = V
PR
,
Type and Sample Test with t
m
= 10 s, Partial Discharge < 5 pC 2262 V
peak
V
IORM
Maximum Working Insulation Voltage 1414 V
peak
V
IOTM
Highest Allowable Over Voltage 8000 V
peak
External Creepage 10.0 mm
External Clearance 10.0 mm
Insulation Thickness 0.5 mm
Safety Limit Values – Maximum Values Allowed in the
Event of a Failure
T
S
Case Temperature 150 °C
I
S,INPUT
Input Current 200 mA
P
S,OUTPUT
Output Power 600 mW
R
IO
Insulation Resistance at T
S
, V
IO
= 500 V 10
9
Ω
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 4
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
T
A
= 25ºC unless otherwise specified.
Notes:
1. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%.
2.
No derating required across operating temperature range.
3.
Derate linearly from 25°C at a rate of 5.2 mW/°C
.
4.
Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected
to conditions outside these ratings.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol Parameter Value Units
T
STG
Storage Temperature
-40 to +125 °C
T
OPR
Operating Temperature
-40 to +100 °C
T
J
Junction Temperature
-40 to +125 °C
T
SOL
Lead Solder Temperature
Refer to Reflow Temperature Profile on page 15.
260 for 10 s °C
I
F(AVG)
Average Input Current
25 mA
F
Operating Frequency
50 kHz
V
R
Reverse Input Voltage
5.0 V
I
O(PEAK)
Peak Output Current
(1)
3.0 A
V
DD
Supply Voltage
0 to 35 V
V
O(PEAK)
Peak Output Voltage
0 to V
DD
V
t
R(IN)
, t
F(IN)
Input Signal Rise and Fall Time
500 ns
PD
I
Input Power Dissipation
(2)(4)
45 mW
PD
O
Output Power Dissipation
(3)(4)
500 mW
Symbol Parameter Min. Max. Unit
T
A
Ambient Operating Temperature
-40 100 °C
V
DD
– V
SS
Supply Voltage
16 30 V
I
F(ON)
Input Current (ON)
716mA
V
F(OFF)
Input Voltage (OFF)
0 0.8 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 5
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Isolation Characteristics
Apply over all recommended conditions, typical value is measured at T
A
= 25ºC.
Notes:
5. Device is considered a two terminal device: pins 1 and 3 are shorted together and pins 4, 5 and 6 are shorted
together.
6. 5,000 VAC
RMS
for 1 minute duration is equivalent to 6,000 VAC
RMS
for 1 second duration.
Electrical Characteristics
Apply over all recommended conditions, typical value is measured at V
DD
= 30 V, V
SS
= Ground, T
A
= 25°C unless
otherwise specified.
Notes:
7. In this test, V
OH
is measured with a dc load current of 100 mA. When driving capacitive load V
OH
will approach V
DD
as I
OH
approaches 0 A.
8. Maximum pulse width = 1 ms, maximum duty cycle = 20%.
Symbol Parameter Conditions Min. Typ. Max. Units
V
ISO
Input-Output Isolation
Voltage
T
A
= 25ºC, R.H. < 50%, t = 60 s,
I
I-O
≤ 20 µA, 50 Hz(5)(6) 5,000 VRMS
RISO Isolation Resistance VI-O = 500 V(5) 1011 Ω
CISO Isolation Capacitance VI-O = 0 V, Frequency = 1.0 MHz(6) 1pF
Symbol Parameter Conditions Min. Typ. Max. Units Figure
VFInput Forward Voltage
IF = 10 mA
1.1 1.5 1.8 V 19
Δ(VF / TA)Temperature Coefficient of
Forward Voltage -1.8 mV/°C
BVR
Input Reverse Breakdown
Voltage IR = 10 µA 5 V
CIN Input Capacitance f = 1 MHz, VF = 0 V 60 pF
IOH
High Level Output
Current(1)
VOH = VDD – 3 V 1.0 2.0 2.5 A 4, 6
VOH = VDD – 6 V 2.0 2.5 A 4, 6, 22
IOL
Low Level Output
Current(1)
VOL = VSS + 3 V 1.0 2.0 2.5 A 7, 9
VOL = VSS + 6 V 2.0 2.5 A 7, 9, 21
VOH
High Level Output
Voltage(7)(8)
IF = 10 mA, IO = -2.5 A VDD – 6.25 VDD – 2.5 V 4
IF = 10 mA, IO = -100 mA VDD – 0.5 VDD – 0.1 4, 5, 23
VOL
Low Level Output
Voltage(7)(8)
IF = 10 mA, IO = 2.5 A VSS + 2.5 VSS + 6.25 V 7
IF = 0 mA, IO = 100 mA VSS + 0.1 VSS + 0.5 8, 24
IDDH High Level Supply Current VO Open, IF = 7 to 16 mA 2.9 3.8 mA 10, 11,
25
IDDL Low Level Supply Current VO Open, VF = 0 to 0.8 V 2.8 3.8 mA 10, 11,
26
IFLH
Threshold Input Current
Low to High IO = 0 mA, VO > 5 V 2.4 5.0 mA 12, 18,
27
VFHL
Threshold Input Voltage
High to Low IO = 0 mA, VO < 5 V 0.8 V 28
VUVLO+ UnderVoltage Lockout
Threshold
IF = 10 mA, VO > 5 V 11.5 12.7 14.5 V 20, 29
VUVLO- IF = 10 mA, VO < 5 V 10.0 11.2 13.0 V 20, 29
UVLOHYS
UnderVoltage Lockout
Threshold Hysteresis 1.5 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 6
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Switching Characteristics
Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = Ground, TA = 25°C unless
otherwise specified.
Notes:
9. Propagation delay tPHL is measured from the 50% level on the falling edge of the input pulse to the 50% level of the
falling edge of the VO signal.
10. Propagation delay tPLH is measured from the 50% level on the rising edge of the input pulse to the 50% level of the
rising edge of the VO signal.
11. PWD is defined as | tPHL – tPLH | for any given device.
12. The difference between tPHL and tPLH between any two FOD8320 parts under the same operating conditions, with
equal loads.
13. Common mode transient immunity at output high is the maximum tolerable negative dVcm/dt on the trailing edge of
the common mode impulse signal, VCM, to ensure that the output remains high (i.e., VO > 15.0 V).
14. Common mode transient immunity at output low is the maximum tolerable positive dVcm/dt on the leading edge of
the common pulse signal, VCM, to ensure that the output remains low (i.e., VO < 1.0 V).
Symbol Parameter Conditions Min. Typ. Max. Units Figure
tPHL
Propagation Delay Time to
Logic Low Output(9)
IF = 7 mA to 16 mA, Rg = 10 Ω,
Cg = 10 nF, f = 10 kHz,
Duty Cycle = 50%
150 285 400 ns
13, 14,
15, 16,
17, 30
tPLH
Propagation Delay Time to
Logic High Output(10) 150 260 400 ns
13, 14,
15, 16,
17, 30
PWD Pulse Width Distortion(11)
| tPHL – tPLH |25 100 ns
PDD
(Skew)
Propagation Delay Difference
Between Any Two Parts(12) -250 250
tR
Output Rise Time
(10% to 90%) 60 ns 30
tF
Output Fall Time
(90% to 10%) 60 ns 30
tULVO ON ULVO Turn On Delay IF = 10 mA, VO > 5 V 0.8 µs
tULVO OFF ULVO Turn Off Delay IF = 10 mA, VO < 5 V 0.4 µs
| CMH |Common Mode Transient
Immunity at Output High
TA = 25°C, VDD = 30 V,
IF = 7 mA to 16 mA,
VCM = 2000 V(13) 35 50 kV/µs 31
| CML |Common Mode Transient
Immunity at Output Low
TA = 25°C, VDD = 30 V, VF = 0 V,
VCM = 2000 V(14) 35 50 kV/µs 31
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 7
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Typical Performance Characteristics
IOH – OUTPUT HIGH CURRENT (A)
Figure 6. Output High Current
vs. Ambient Temperature
8
7
6
5
4
3
2
1
0
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VO = VDD – 6 V
VO = VDD – 3 V
VOL – OUTPUT LOW VOLTAGE (V)
0.25
0.20
0.15
0.10
0.05
0
Figure 8. Output Low Voltage
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VOH – VDD – OUTPUT HIGH VOLTAGE DROP (V)
0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
Figure 4. Output High Voltage Drop
vs. Output High Current
0 0.5 1.0 1.5 2.0 2.5
IOH – OUTPUT HIGH CURRENT (A)
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
f = 200 Hz 0.2% Duty Cycle
TA = -40°C
25°C
100°C
VOL – OUTPUT LOW VOLTAGE (V)
4
3
2
1
0
Figure 7. Output Low Voltage
vs. Output Low Current
0 0.5 1.0 1.5 2.0 2.5
IOL – OUTPUT LOW CURRENT (A)
-40°C
25°C
TA = 100°C
VOH–VDD – OUTPUT HIGH VOLTAGE DROP (V)
Figure 5. Output High Voltage Drop
vs. Ambient Temperature
0
-0.05
-0.10
-0.15
-0.20
-0.25
-0.30
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
IO = -100 mA
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
f = 200 Hz 0.2% Duty Cycle
VDD = 15 V to 30 V
VSS = 0 V
VF = 0 V or 0.8 V
IO = 100 mA
VDD = 15 V to 30 V
VSS = 0 V
IF = 0 mA
f = 200 Hz 99.8% Duty Cycle
IOL – OUTPUT LOW CURRENT (A)
8
6
4
2
0
Figure 9. Output Low Current
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 15 V to 30 V
VSS = 0 V
IF = 0 A
f = 200 Hz 99.8% Duty Cycle
VO = VSS + 6V
VO = VSS + 3V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 8
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Typical Performance Characteristics (Continued)
IDD – SUPPLY CURRENT (mA)
3.6
3.2
2.8
2.4
2.0
Figure 10. Supply Current
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 30 V
VSS = 0 V
IF = 10 mA (for IDDH)
IF = 0 mA (for IDDL)
IDDH
IDDL
IFLH – LOW TO HIGH INPUT CURRENT
THRESHOLD (mA)
4
3.5
3.0
2.5
2.0
1.5
1.0
Figure 12. Low to High Input Current Threshold
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 15 V to 30 V
VSS = 0 V
Output = Open
IDD – SUPPLY CURRENT (mA)
3.6
3.2
2.8
2.4
2.0
Figure 11. Supply Current
vs. Supply Voltage
15 20 25 30
VDD – SUPPLY VOLTAGE (V)
IF = 10 mA (for IDDH)
IF = 0 mA (for IDDL)
VSS = 0 V
TA = 25°C
IDDH
IDDL
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 13. Propagation Delay
vs. Supply Voltage
15 18 21 24 27 30
VDD – SUPPLY VOLTAGE (V)
IF = 10 mA
Rg = 10 Ω
Cg = 10 nF
TA = 25°C
tPHL
tPLH
Figure 15. Propagation Delay
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 14. Propagation Delay
vs. LED Forward Current
6 8 10 12 14 16
IF – FORWARD LED CURRENT (mA)
tPHL tPHL
tPLH
tPLH
VDD = 30 V
VSS = 0 V
f = 10 kHz 50% Duty Cycle
Rg = 10 Ω
Cg = 10 nF
TA = 25°C
VDD = 30 V
VSS = 0 V
IF = 10 mA
f = 10 kHz 50% Duty Cycle
f = 10 kHz 50% Duty Cycle
Rg = 10 Ω
Cg = 10 nF
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 9
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Typical Performance Characteristics (Continued)
VO – OUTPUT VOLTAGE (V)
14
12
10
8
6
4
2
0
Figure 20. Under Voltage Lockout
0 5 10 15 20
VDD–VSS – SUPPLY VOLTAGE (V)
IF = 10 mA
TA = 25°C
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 16. Propagation Delay
vs. Series Load Resistance
0 1020304050
Rg – SERIES LOAD RESISTANCE (Ω)
tPLH
VDD = 30 V
VSS = 0 V
IF = 10 mA
f = 10 kHz 50% Duty Cycle
Cg = 10 nF
TA = 25°C
tPHL
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 17. Propagation Delay
vs. Load Capacitance
0 20406080100
Cg – LOAD CAPACITANCE (nF)
tPLH
VDD = 30 V
VSS = 0 V
IF = 10 mA
f = 10 kHz 50% Duty Cycle
Rg = 10 Ω
TA = 25°C
tPHL
VO – OUTPUT VOLTAGE (V)
35
30
25
20
15
10
5
0
Figure 18. Transfer Characteristics
012345
IF – FORWARD LED CURRENT (mA)
VDD = 30 V
TA = 25°C
IF – FORWARD CURRENT (mA)
100
10
1
0.1
0.01
0.001
Figure 19. Input Forward Current
vs. Forward Voltage
0.6 0.8 1.0 1.2 1.4 1.6 1.8
VF – FORWARD VOLTAGE (V)
100°C25°C-40°C
VUVLO = 11.56 V VUVLO = 13.12 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 10
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit
Figure 21. IOL Test Circuit
Figure 22. IOH Test Circuit
+
+
Power Supply
VDD = 15 V to 30 V
Power Supply
V = 6 V
IOL
PW = 4.99 ms
Period = 5 ms
ROUT = 50 Ω
R2
100 Ω
Frequency = 200 Hz
Duty Cycle = 99.8%
VDD = 15 V to 30 V
VSS = 0 V
IF = 0 mA
C1
0.1 μF
Pulse-In
LED-IFmon
Pulse Generator
Test Conditions:
To Scope
VOL
R1
100 Ω
C2
47 μF
+
C3
0.1 μF
D1 C4
47 μF
+
1
3
6
5
4
PW = 10 μs
Period = 5 ms
ROUT = 50 Ω
R2
100 Ω
Frequency = 200 Hz
Duty Cycle = 0.2%
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
C1
0.1 μF
Pulse-In
LED-IFmon
Pulse Generator
Test Conditions:
Power Supply
VDD = 15 V to 30 V
+
+
–
Power Supply
V = 6 V
To Scope
VOH
R1
100 Ω
C2
47 μF
+
C3
0.1 μF
D1
Current
Probe
IOH
C4
47 μF
+
1
3
6
5
4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 11
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 23. VOH Test Circuit
Figure 24. VOL Test Circuit
IF = 7 mA to 16 mA VO
0.1 μF
100 mA
VDD = 15 V to 30 V
+
–
1
3
6
5
4
VO
0.1 μF100 mA
VDD = 15 V to 30 V
+
–
1
3
6
5
4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 12
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 25. IDDH Test Circuit
Figure 26. IDDL Test Circuit
1
3
6
5
4
IF = 7 mA to 16 mA VO
0.1 μF
VDD = 30 V
+
–
1
3
6
5
4
VF = -3.0 V to 0.8 V VO
0.1 μFVDD = 30 V
+
–
+
–
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 13
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 27. IFLH Test Circuit
Figure 28. VFHL Test Circuit
Figure 29. UVLO Test Circuit
1
3
6
5
4
VO > 5 V
0.1 μF
IF
VDD = 15 V to 30 V
+
–
1
3
6
5
4
VF = –3.0 V to 0.8 V VO
0.1 μF
VDD = 15 V to 30 V
+
–
+
–
1
3
6
5
4
VO = 5 V
0.1 μF
15 V or 30 V
VDD Ramp
+
–
IF = 10 mA
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 14
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 30. tPHL, tPLH, tR and tF Test Circuit and Waveforms
Figure 31. CMR Test Circuit and Waveforms
VO
Probe
f = 10 kHz
DC = 50%
IF
VOUT
tPLH
Cg = 10 nF
Rg = 10 Ω
50 Ω
0.1 μF
VDD = 15 V to 30 V
+
–
+
–
tRtF
90%
50%
10%
tPHL
1
3
6
5
4
A
B
VO
0.1 μF
VDD = 30 V
VCM = 2,000 V
IF
+
–
5 V +
–
Δt
VCM
VO
Switch at A: IF = 10 mA
Switch at B: IF = 0 mA
VOH
VOVOL
0V
+ –
1
3
6
5
4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 15
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Reflow Profile
Figure 32. Reflow Profile
Profile Freature Pb-Free Assembly Profile
Temperature Minimum (Tsmin) 150°C
Temperature Maximum (Tsmax) 200°C
Time (tS) from (Tsmin to Tsmax) 60 s to 120 s
Ramp-up Rate (tL to tP) 3°C/second maximum
Liquidous Temperature (TL) 217°C
Time (tL) Maintained Above (TL) 60 s to 150 s
Peak Body Package Temperature 260°C +0°C / –5°C
Time (tP) within 5°C of 260°C 30 s
Ramp-Down Rate (TP to TL) 6°C/s maximum
Time 25°C to Peak Temperature 8 minutes maximum
Time (seconds)
Temperature (°C)
Time 25°C to Peak
260
240
220
200
180
160
140
120
100
80
60
40
20
0
TL
ts
tL
tP
TP
Tsmax
Tsmin
120
Preheat Area
Maximum Ramp-up Rate = 3°C/s
Maximum Ramp-down Rate = 6°C/s
240 360
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 16
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Ordering Information
All packages are lead free per JEDEC: J-STD-020B standard.
Marking Information
Part Number Package Packing Method
FOD8320 Wide Body SOP 5-Pin Tube (100 units per tube)
FOD8320R2 Wide Body SOP 5-Pin Tape and Reel (1,000 units per reel)
FOD8320V Wide Body SOP 5-Pin, DIN EN/IEC60747-5-5 Option Tube (100 units per tube)
FOD8320R2V Wide Body SOP 5-Pin, DIN EN/ IEC60747-5-5 Option Tape and Reel (1,000 units per reel)
1
2
8
4
3
5
Definitions
1 Fairchild logo
2 Device number, e.g., ‘8320’ for FOD8320
3 DIN EN/IEC60747-5-5 Option (only appears on
component ordered with this option)
4 Plant code, e.g., ‘D’
5 Last digit year code, e.g., ‘C’ for 2012
6 Two digit work week ranging from ‘01’ to ‘53’
7 Lot traceability code
8 Package assembly code, W
8320
D X YY KK
V
67
W
LAND PATTERN
RECOMMENDATION
NOTES: UNLESS O T HERWISE SPECIFIED
A) THIS PACKAGE DOES NOT
CONF ORM TO A NY STANDARD.
B) ALL DIMENSIONS ARE IN
MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS
D) DRAWING CONFORMS TO ASME
Y14.5M-1994
E) DRAWING FILE NAME:
MKT-M05AREV3
SCALE: 3.2:1
9.20
1.27 3.95
PIN ONE
INDICATOR
A
1.35
1.15
0.25 0.74
0.44
13
64
11.38
A
B
C
0.20 CA-B
2X
13
64
4.60
0.10 C D
2X
2.54
5X 0.51
0.31
0.25 CA-B D
11.80
11.60
D
0.60
0.33 C
5 TIPS
2.65
2.45
2.95 MAX
0.30
0.10
0.10 CSEATING
PLANE
0.10 C
5X
GAUGE
PLANE
SEATING
PLANE
C
0.25
0.19
(R1.29)
(R0.54)
1.27
1.38
8°
0°
2.54
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
