12CWQ04FNTR - International Rectifier

SCHOTTKY RECTIFIER 12 Amp

12CWQ04FN

www.irf.com 1

Bulletin PD-20546 rev. F 03/03

Major Ratings and Characteristics

IF(AV) Rectangular 12 A

waveform

VRRM 40 V

IFSM @ tp = 5 µs sine 340 A

VF@ 6 Apk, TJ = 125°C 0.48 V

(per leg)

TJrange - 55 to 150 °C

Characteristics 12CWQ04FN Units

Description/ Features

The 12CWQ04FN surface mount, center tap, Schottky rectifier

series has been designed for applications requiring low forward

drop and small foot prints on PC board. Typical applications are

in disk drives, switching power supplies, converters, free-

wheeling diodes, battery charging, and reverse battery

protection.

Popular D-PAK outline

Center tap configuration

Small foot print, surface mountable

Low forward voltage drop

High frequency operation

Guard ring for enhanced ruggedness and long term reliability

D-Pak (TO-252AA)

6.73 (0.2 6)

6.35 (0.25)

5.46 (0.21)

5.21 (0.20)

1.27 (0.0 5)

0.88 (0.03)

5.97 (0.2 3)

1 - Anode

2 - Cathode

3 - Anode

4 - Cathode

1.64 (0.0 2)

1.52 (0.06)

1.15 (0.04)

1.14 (0.04)

0.76 (0.03)

2.28 (0.09)

0.89 (0.03)

0.64 (0.02)

4.57 (0.18)

123

6.22 (0.24)

2.38 (0.09)

2.19 (0.08)

6.45 (0.2 4)

5.68 (0.22)

10.42 (0.41)

9.40 (0.37)

0.46 (0.0 2)

0.58 (0.0 2)

1.14 (0.04)

0.89 (0.0 3)

0.51 (0.0 2)

MIN.

0.58 (0.0 2)

0.46 (0.02)

MINIMUM RECOMMENDED FOO TPRINT

5.97 (0.2 4)

10.67 (0.4 2)

1.65 (0.06)

6.48 (0.26)

2.54 (0.10)

2.28 (0.0 9)

Conform to JEDEC outline D-Pak (Similar to TO-252AA)

Dimensions in millimeters and (inches)

Anode

node

Base

Common

Cathode

Common

Cathode

12CWQ04FN

Bulletin PD-20546 rev. F 03/03

www.irf.com

VFM Max. Forward Voltage Drop 0.53 V @ 6A

(Per Leg) * See Fig. 1 (1) 0.68 V @ 12A

0.48 V @ 6A

0.64 V @ 12A

IRM Max. Reverse Leakage Current 3 mA TJ = 25 °C

(Per Leg) * See Fig. 2 (1) 40 mA TJ = 125 °C

VF(TO) Threshold Voltage 0.28 V TJ = TJ max.

rtForward Slope Resistance 25.58 mΩ

CTTyp. Junction Capacitance (Per Leg) 4 05 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C

LSTypical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body

TJMax. Junction Temperature Range (*) - 55 to 150 °C

Tstg Max. Storage Temperature Range - 55 to 150 °C

RthJC Max. Thermal Resistance (Per Leg) 3.0 °C/W DC operation * See Fig. 4

Junction to Case (Per Device) 1.5

wt Approximate Weight 0.3 (0.01) g (oz.)

Case Style D-Pak Similar to TO-252AA

Thermal-Mechanical Specifications

TJ = 25 °C

TJ = 125 °C

Electrical Specifications

(1) Pulse Width < 300µs, Duty Cycle <2%

VR = rated VR

Part number 12CWQ04FN

VRMax. DC Reverse Voltage (V)

VRWM Max. Working Peak Reverse Voltage (V)

Voltage Ratings

Parameters 12CWQ... Units Conditions

IF(AV) Max. Average Forward(Per Leg) 6 A 50% duty cycle @ TC = 134°C, rectangular wave form

Current* See Fig. 5 (Per Device) 12

IFSM Max. Peak One Cycle Non-Repetitive 340 5µs Sine or 3µs Rect. pulse

Surge Current * See Fig. 7 70 10ms Sine or 6ms Rect. pulse

EAS Non-Repet. Avalan. Energy (Per Leg) 9 mJ TJ = 25 °C, IAS = 1.5 Amps, L = 8 mH

IAR Repetitive Avalanche Current 1.2 A Current decaying linearly to zero in 1 µsec

(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical

Absolute Maximum Ratings

Following any rated

load condition and with

rated VRRM applied

Parameters 12CWQ... Units Conditions

< thermal runaway condition for a diode on its own heatsink

(*) dPtot 1

dTj Rth( j-a)

12CWQ04FN

Bulletin PD-20546 rev. F 03/03

www.irf.com

Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage (Per Leg)

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage (Per Leg)

Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)

Fig. 1 - Max. Forward Voltage Drop Characteristics

(Per Leg)

0.001

0.01

0.1

100

0 5 10 15 20 25 30 35 40

125°C

100°C

75°C

50°C

25°C

Rev erse C u rrent - I (mA )

T = 150°C

Rever se Vol tage - V (V)

100

1000

0 5 10 15 20 25 30 35 40 45

Ju ncti on Capaci tance - C (pF)

Reverse Voltage - V (V)

T = 25°C

0.01

0.1

0.00001 0.0001 0.001 0.01 0.1 1

thJC

t , Re ct angular Pulse Duration (Seconds)

Single P ulse

(T hermal Resista nc e)

Thermal Impedance Z (°C/W)

D = 0.75

D = 0.50

D = 0.33

D = 0.25

D = 0.20

thJC C

Notes:

1 . Duty factor D = t / t

2 . Peak T = P x Z + T

100

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2

In stan t aneous Forward Curre n t - I ( A)

Forward Voltage Drop - V (V)

T = 150°C

T = 125°C

T = 25 °C

12CWQ04FN

Bulletin PD-20546 rev. F 03/03

www.irf.com

Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics

(Per Leg)

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);

PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR

115

120

125

130

135

140

145

150

155

0123456789

A llowable C ase Temperatu re - (°C)

F(AV)

se e note (2)

Square wave (D = 0.50)

80 % Rated V applied

Aver age Forward Current - I (A)

0123456789

Average Power Loss - (Watts)

F(AV)

RMS Lim it

D = 0.20

D = 0.25

D = 0.33

D = 0.50

D = 0.75

Aver age Forward Current - I (A)

100

1000

10 100 1000 10000

FSM

Non-Repetitive Sur ge Curr ent - I (A)

Square Wave Pulse Duration - t (microsec)

At Any Rated Load Condi ti on

And With Rated V Applied

Following Surge

RRM

12CWQ04FN

Bulletin PD-20546 rev. F 03/03

www.irf.com

Tape & Reel Information

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

12.1 (0.48)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

11.9 (0.47)

1.85 (0.07)

TO-252AA Tape & Reel

When ordering, indicate the part

number, part orientation, and the

quantity. Quantities are in multiples

of 2,000 pieces per reel for TR and

multiples of 3,000 pieces per reel

for both TRL and TRR.

13 (0.52) DIA.

DIA. MAX.

375 (14.17) 50 (1.97) DIA.

22.4 (0.88)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

6.8 (0.26)

7.0 (0.28)

TRR

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

8.1 (0.32)

1.85 (0.07)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

7.9 (0.31)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

10.4 (0.41)

10.6 (0.42)

DIA.

TRL

FEED DIRECTION

4.1 (0.16)

3.9 (0.15)

2.1 (0.83)

1.9 (0.07)

8.1 (0.32)

1.85 (0.07)

1.65 (0.06)

1.85 (0.07)

1.65 (0.06)

7.4 (0.29)

2.6 (0.10)

1.5 (0.06)

7.6 (0.30)

7.9 (0.31)

0.35 (0.01)

16.3 (0.64)

15.7 (0.62)

2.75 (0.11)

2.55 (0.10)

0.25 (0.01)

10.4 (0.41)

10.6 (0.42)

DIA.

Marking Information

EXAMPLE: THIS IS AN 12CWQ04FN

5K3A

12CWQ04FN

712A

INTERNATIONAL

RECTIFIER LOGO PART NUMBER

DATE CODE (YWWA)

Y = YEAR

WW = WEEK

A = LINE

ASSEMBLY

LOT CODE

4 (K)

1 (A) 3 (A)

2 (K)

12CWQ04FN

Bulletin PD-20546 rev. F 03/03

www.irf.com

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 03/03

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.

Qualification Standards can be found on IR's Web site.