POWER DP10054P3L 100 Watts Data Sheet Total Power: 100 Watts Input Voltage: 90 - 264 Vac # of Outputs: Single, 54 Volts SPECIAL FEATURES Active power factor correction EN6100-3-2 compliant Universal AC input Fully regulated output Overcurrent, overvoltage and thermal protection Constant voltage Level VI efficiency High MTBF IEC320 AC receptacle, 3 pin (type C6) Built in EMI filter (CISPR 22 Class B) AC input fuse Efficiency complies with European CoC v.5 Tier 2 & US DoE Level VI RoHS compliant POE isolation on output Meets K.21 enhanced surge requirements of 6KV Criteria B Electrical Specifications Input Input range 90 - 264 Vac (wide range) Frequency 47 - 63 Hz Inrush current 94 A maximum @ 264 Vac, cold start 25 C Input current 1.85 A maximum Efficiency 87% typical EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class-B Safety ground leakage current 3.5 mA maximum @ 50/60 Hz, 264 Vac input Output Maximum power (Po) 100 W Hold-up time 20 ms. minimum at full load @ 115 Vac SAFETY Overvoltage protection Latching type, recycle AC to reset UL UL 60950-1 IEC 62368-1 CSA CSA-C22.2 No.60950-1 CB Certificate and report PSE Denan PSE approval (Japan) CCC CE LVD and EMC TUVEN60950-1 Overcurrent protection Output short circuit protection auto recover Overload protection @ 110 - 160% above maximum rating Thermal protection 105 C to 120 C Trip point; output will latch off Cable/connector DC cable length 2.5 mm center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature -5 C to +45 C ambient Storage temperature -40 C to +70 C Electromagnetic susceptibility Designed to meet EN61000-4-2, -4, -5, level 3; EN61000-4-3, -6, 3 v/m; EN61000-4-8, -11; EN61000-3-2 Class A Humidity Operating; non-condensing 10% to 90% RH MTBF demonstrated > 550,000 hours at full load and 25 C ambient conditions DP10054P3L Data Sheet Ordering Information Model Number Maximum Power Output Voltage Maximum Load Peak Load1 Regulation2 Ripple P/P (PARD)3 DP10054P3L 100 W 54 Vdc 1.85 A 2.035 A 5% < 540 mV 1. Peak current lasting <4 seconds with a maximum 10% duty cycle. 2. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. Mechanical Drawing Notes: 1. Specifications subject to change without notice. 2. All dimensions in (mm) 3. Warranty: 2 year 4. Weight: 0/9 lb./0.4 kg 5. AC input conector: IEC320, C6. AC input power cord sold separately. 6. Specifications at factory settings at 115/230 Vac input, 25 C unless otherwise stated WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. (c) 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com DP10054P3L DS 14Aug2017