CA-PLCC84-D-P-01 - Ironwood Electronics

35.55mm

[1.400"]

35.55mm

[1.400"]

12.51mm

[0.493"]

20.30mm[0.799"]assembled

5.25mm

[0.207"]

11.6mm

[0.457"]

Status: Released

Drawing: G. Nelson

Scale: 2:1 Rev: B

Date: 8/1/95

Modified: 3/30 /00

File: CA-PLCC84-D-P-01 Dwg

CA-PLCC84-D-P-01 Drawing

PO BOX 21151 ST. PAUL, MN 55121

Tele: (651) 452-8100

www.ironwoodelectronics.com

Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)

±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise.

Top View

Side View

Description: Carrier Adaptor

84 pin PLCC production socket to 84 pin surface mount foot. Top and bottom i nterface plug via a gold plated minigrid array.

Substrate: 3.18mm ±0.18mm [0.125" ±0.007"]

FR4/G10 or equivalent high temp material. Non-clad.

Pins: material- Brass Alloy 360 1/2 hard; finish-

0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).

Pins: shell material- Brass Alloy 360 1/2 hard;

finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni

(min.). Contact material- BeCu; finish 0.25µm

[10µ"] Au over 2.54µm [100µ"] Ni (min. ).

Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]

FR4/G10 or equivalent high temp material. 17µm [1/2

oz.] Cu clad. SnPb plating.

Leads: material- BeCu Alloy 194; plating- 60/40

SnPb 3.80-10.16µm [150-400µ"].