A1 Draw Latch 292 Over-center * Adjustable * Hooked latching rod * Latching arm adjusts to fit your grip range Material and Finish Small O 5.30.1 (.209.005) Latch assembly M5 thread 68 (2.66) Installation Notes Small: Install assembly with four M5 (No. 10) screws or rivets Medium: Install assembly with four M6 (1/4) screws or rivets 21 (.82) Hook may be used sideways 25.50.1 (1.00005) Either inside or end of hook may be used for latching. In either case, 1.5 (.06) Thick yellow vinyl grip contact point must be no higher than 4.4 Housing Lever (.17) 3 (.13) above mounting surface Performance Details Latched at center of radius: Small: Maximum static load: 1350 N (300 lbf) Medium: Maximum static load: 3110 N (700 lbf) Latching rod 27 (1.06) Stainless steel or steel, zinc plated Grip: Vinyl yellow Latched at end of hook: Small: Maximum static load: 1200 N (270 lbf) Medium: Maximum static load: 1780 N (400 lbf) Jam nut Rod guide 20 (.78) Hook into a cover 17 (.67) O 19 (.75) Minimum hole 6 (.24) 39 (1.5) Minimum to 59 (2.3) Maximum 1.6 (.060) Lever O 6.5 (.25) Maximum (small) O 9.5 (.38) Maximum (medium) Lock nut Latching rod Latching rod Hook around a pin Lever Housing O 6.50.1 (.257.005) ACTUAL SIZE (SMALL) Medium Rod guide 44.50.2 (1.75.010) Jam nut Latching rod 40 (1.56) Latch assembly 5/16-18 UNC thread 31 (1.21) 113 (4.45) 1.5 (.06) Thick yellow vinyl grip Lever Housing 7 (.27) Hook may be used sideways Either inside or end of hook may be used for latching. In either case, contact point must be no higher than 11 (.44) above mounting surface 32 (1.25) Hook onto a lid 25 (1.00) 9 (.36) 79 (3.13) Minimum to 113 (4.44) Maximum 1.9 (.075) ACTUAL SIZE (MEDIUM) Part Number Selection ________________________________________________________________________________ B Base size 5 Small 7 Medium A1 - 11 - B 02- M Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/A1 Dimensions in millimeters (inch) unless otherwise stated M 10 20 40 50 Finish Steel, zinc plated without yellow grip Steel, zinc plated with yellow grip Stainless steel without yellow grip Stainless steel with yellow grip A1 Draw Latch 293 Over-center * Adjustable Small Rod guide 4.4 (.17) Jam nut * Adjustable grip Keeper Style A 13 8 (.31) (.50) 27 (1.06) Keeper Style B 5 (.19) 22 (.88) 22 (.88) 1.3 (.050) Small Panel Preparation Small (keeper style A): Maximum static load: 180 N (40 lbf) Small (keeper style B): Maximum static load: 1550 N (350 lbf) 2 Mounting holes tapped M5 x 0.8 by 7 (.28) deep. Mounting screws not supplied 11 (.44) 1.6 (.060) Performance Details 12 (.47) Separation latching rod 20 (.78) 5 (.19) 13 (.50) 14 (.56) O 5.2 (.203) Door/frame separation Stainless steel or steel, zinc plated Grip: Vinyl yellow 13(.50) 5 (.19) Latch assembly 21 M5 thread (.82) 68 (2.66) 1.5 (.06) Thick yellow vinyl grip Housing Lever Material and Finish Medium (keeper style A) Maximum static load: 890 N (200 lbf) Medium Panel Preparation ACTUAL SIZE 6.40.2 (.250.005) Door / frame separation +.010 O5.2 +0.2 -0.0 (.203 -.000 ) 9.50.2 (.375.005) Door / frame separation 12.70.2 (.500.005) Installation Notes +.010 O 6.7 +0.2 -0.0 (.257 -.000 ) 190.2 (.750.005) +0.1 25.5 -0.2 (1.00 +.005 ) Keeper A 25 (1.00) Min. to 44 (1.75) Max. -.010 Keeper B 29 (1.13) Min. to 48 (1.88) Max. +0.1 44.5 -0.2 (1.75 +.005 ) -.010 Medium Jam nut Rod guide 7 (.27) 24 (.94) Min. to 57 (2.25) Max. Keeper style A 11 (.44) 31 (1.21) Latching rod 6 (.25) 31 (1.21) 19 (.75) O 6.7 (.265) Keeper Door/frame separation Lever Lock nut Latching rod 1.5 (.06) Thick yellow vinyl grip Lever Medium: Install assembly with four M6 (1/4) round head screws or rivets 19 (.75) 40 (1.56) Latch assembly 5/16-18 UNC thread 113 (4.45) Small: Install assembly with four M5 (No. 10) round head screws or rivets Housing Latching rod ACTUAL SIZE 32 (1.25) 1.9 (.075) 19 (.75) 1.5 (.060) ___________________________________________________________________________ Part Number Selection Assembly complete with keeper A1 - 10 - B 0 K - M B Base size 5 Small 7 Medium K Keeper style 1 Type A 3 Type B (Small steel, zinc plated models only) M 10 20 40 50 Finish Steel, zinc plated without yellow grip Steel, zinc plated with yellow grip Stainless steel without yellow grip Stainless steel with yellow grip Dimensions in millimeters (inch) unless otherwise stated Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/A1 A1 Draw Latch 294 Over-center * Adjustable * Robust construction * Adjustable grip Material and Finish Steel, zinc plated or black powder coated Latching rod 45 (1.78) 7/16-14 unc thread Performance Details 203 (8.00) Latched at end of hook: Maximum static load: 2225 N (500 lbf) Latched at center of radius: Maximum static load: 4450 N (1000 lbf) 47 (1.84) Rod guide Door / frame separation Lever Yellow or black vinyl grip Housing O 10 (.386) 46 (1.81) 38 (1.50) O 8.3 (0.33) hole for padlock O 16 (0.63) Maximum for engagement Installation Notes 66.5 +.02 -.01 (2.625.010) +.010 O 8.4 +0.1 -0.0 (.323 -.000 ) (2 Holes) Install assembly with two M8 (5/16) bolts (not supplied) 16 (.61) G Grip range (see table) Hook may be used sideways. Either inside or end of hook may be used for latching. In either case, contact point must be no higher than 25 (1.00) above mounting surface Lever Latching rod Lock nut ACTUAL SIZE Part Number See table Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/A1 G Grip Range Part Number Minimum Maximum Bright latch with yellow vinyl grip Black latch with black vinyl grip 89 (3.50) 114 (4.50) A1-11-902-20 A1-11-902-31 Dimensions in millimeters (inch) unless otherwise stated