292
ACTUAL
SIZE
(SMALL)
ACTUAL SIZE
(MEDIUM)
Dimensions in millimeters (inch) unless otherwise stated
A1 - 11 - B 02- M
A1 Draw Latch
Over-center · Adjustable
• Hooked latching rod
• Latching arm adjusts to
fit your grip range
Material and Finish
Stainless steel or steel, zinc plated
Grip: Vinyl yellow
Performance Details
Latched at end of hook:
Small:
Maximum static load:
1200 N (270 lbf)
Medium:
Maximum static load:
1780 N (400 lbf)
Latched at center of radius:
Small:
Maximum static load:
1350 N (300 lbf)
Medium:
Maximum static load:
3110 N (700 lbf)
Installation Notes
Small:
Install assembly with four M5
(No. 10) screws or rivets
Medium:
Install assembly with four M6 (1/4)
screws or rivets
www.southco.com/A1
B Base size
5 Small
7 Medium
M Finish
10 Steel, zinc plated without yellow grip
20 Steel, zinc plated with yellow grip
40 Stainless steel without yellow grip
50 Stainless steel with yellow grip
Small
Medium
Latching rod
Hook may be used sideways
Either inside or end of hook may be
used for latching. In either case,
contact point must be no higher than
3 (.13) above mounting surface
Rod guide Jam nut
Latch assembly
1.5 (.06) Thick yellow vinyl grip
Housing
M5 thread
Lever
27
(1.06)
68 (2.66)
20
(.78)
21
(.82)
1.6 (.060)
4.4
(.17)
39 (1.5) Minimum to
59 (2.3) Maximum
6 (.24)
17 (.67)
Latching rod
Hook may be used sideways
Either inside or end of hook may be
used for latching. In either case,
contact point must be no higher than
11 (.44) above mounting surface
Rod guide Jam nut
Latch assembly
1.5 (.06) Thick yellow vinyl grip
Housing
5/16-18 UNC thread
Lever
79 (3.13) Minimum to
113 (4.44) Maximum
40
(1.56)
113 (4.45)
32
(1.25)
31
(1.21)
1.9 (.075)
7
(.27)
9 (.36)
25
(1.00)
Ø 5.3±0.1
(.209±.005)
25.5±0.1
(1.00±005)
44.5±0.2
(1.75±.010)
Ø 6.5±0.1
(.257±.005)
Latching
rod
Lever
Lever
Lock nut
Latching rod
Housing
Hook
onto
a lid
Hook into
a cover
Hook around
a pin
Ø 19 (.75)
Minimum
hole
Ø 6.5 (.25) Maximum (small)
Ø 9.5 (.38) Maximum (medium)
Part Number Selection _______________________________________________________________________________
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
293
ACTUAL SIZE
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated
A1 - 10 - B 0 K - M
• Adjustable grip
Material and Finish
Stainless steel or steel, zinc plated
Grip: Vinyl yellow
Performance Details
Small (keeper style A):
Maximum static load: 180 N (40 lbf)
Small (keeper style B):
Maximum static load:
1550 N (350 lbf)
Medium (keeper style A)
Maximum static load: 890 N (200 lbf)
Installation Notes
Small:
Install assembly with four M5
(No. 10) round head screws or rivets
Medium:
Install assembly with four M6 (1/4)
round head screws or rivets
A1 Draw Latch
Over-center · Adjustable
www.southco.com/A1
Assembly complete with keeper
Rod guide Jam nut
Latch assembly
1.5 (.06) Thick yellow vinyl grip
Housing
latching rod
Separation
M5 thread
2 Mounting holes
tapped M5 x 0.8 by
7 (.28) deep. Mounting
screws not supplied
5 (.19)
Keeper Style A
Keeper Style B
22 (.88)
5 (.19)
12
(.47)
13 (.50)
13(.50)
Lever
27
(1.06)
68 (2.66)
20 (.78)
21
(.82)
1.6 (.060)
4.4
(.17)
5 (.19)
22 (.88)
14 (.56)
11
(.44)
13
(.50)
8 (.31)
Ø
5.2 (.203)
1.3 (.050)
Door/frame separation
Rod guide Jam nut
Latch assembly
1.5 (.06) Thick yellow vinyl grip
Housing
Latching rod
5/16-18 UNC thread
Keeper style A
Lever
40
(1.56)
113 (4.45)
32 (1.25)
31
(1.21)
1.9 (.075)
7
(.27)
6 (.25)
31
(1.21)
19
(.75)
19
(.75)
19
(.75)
11
(.44)
Ø 6.7 (.265)
1.5 (.060)
Door/frame separation
Small
Medium
Ø5.2 (.203 )
Keeper A 25 (1.00) Min. to 44 (1.75) Max.
Keeper B 29 (1.13) Min. to 48 (1.88) Max.
12.7±0.2
(.500±.005)
6.4±0.2
(.250±.005)
+0.1
-0.2
+.005
-.010
25.5
(1.00 )
+0.2
-0.0 +.010
-.000
Door / frame separation
B Base size
5 Small
7 Medium
M Finish
10 Steel, zinc plated without yellow grip
20 Steel, zinc plated with yellow grip
40 Stainless steel without yellow grip
50 Stainless steel with yellow grip
K Keeper style
1 Type A
3 Type B (Small steel, zinc plated models only)
24 (.94) Min. to
57 (2.25) Max.
Ø 6.7 (.257 )
+0.2
-0.0
+.010
-.000
+0.1
-0.2
+.005
-.010
44.5
(1.75 )
9.5±0.2
(.375±.005)
19±0.2
(.750±.005)
Door / frame separation
Latching rod
Keeper
Lever
Lock nut
Latching rod
Small Panel Preparation Medium Panel Preparation
___________________________________________________________________________ Part Number Selection
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
294
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
A1 Draw Latch
Over-center · Adjustable
• Robust construction
• Adjustable grip
Material and Finish
Steel, zinc plated or black powder
coated
Performance Details
Latched at end of hook:
Maximum static load:
2225 N (500 lbf)
Latched at center of radius:
Maximum static load:
4450 N (1000 lbf)
Installation Notes
Install assembly with two M8 (5/16)
bolts (not supplied)
Hook may be used sideways. Either
inside or end of hook may be used
for latching. In either case, contact
point must be no higher than 25
(1.00) above mounting surface
www.southco.com/A1
Rod guide
45 (1.78)
46 (1.81)
203 (8.00)
7/16-14 unc thread
Latching rod
Yellow or black vinyl grip
Lever Housing 10
(.386)
Ø
66.5
38 (1.50)
16
(.61)
+.02
-.01
(2.625±.010)
Ø 8.3 (0.33) hole for padlock
Ø 16 (0.63)
Maximum
for engagement
Ø 8.4 +0.1
-0.0 (.323 +.010
-.000 )(2 Holes)
47
(1.84)
(see table)
GGrip range
Door / frame
separation
Lever
Latching rod Lock nut
G Grip Range Part Number
Minimum Maximum Bright latch with yellow vinyl grip Black latch with black vinyl grip
89 (3.50) 114 (4.50) A1-11-902-20 A1-11-902-31
Part Number
See table
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
