DSF100J394TA - Cornell Dubilier Electronics, Inc.

Type DSF film capacitors are made with stacked

metallized polyester, resulting in high volumetric

efficiency and a very economical solution for general

purpose DC applications. Ideally suited for blocking,

by-pass, coupling, decoupling, and filtering circuits.

Specifically designed for applications where high

density insertion of components is required. Ammo

box style or reel taping available.

Stac ked Metallized

Radial Leads Subminiature Size

Voltage Range: 50-100 Vdc (63 Vdc Optional)

Capacitance Range: .010-2.2 µF

Capacitance Tolerance: ± 5% (J) standard

Operating Temperature Range: –40 to + 85°C

Dielectric Strength: Rated Vdc x 150 %, 60 sec.

Dissipation Factor: 1% max (25°C, 1 kHz)

Insulation Resistance:

C≤0.33µF : 3000MΩ min.

C>0.33µF : 1000MΩ.µF min.

Life Test: 1000 h @ 85 °C, 125% rated voltage

Full rated voltage at 85° C-Derate linearly to 50% - rated voltage at 105°C

Pulse Capability

Body Length (mm)

Rated

Volts 7.3, 7.5 10.2

dV/dt volts per microsecond, max.

5 0 32 - 37 1 2

100 55 43

L S

≥10 7.5

Lead Spacing

<10 5.0

Ratings and Dimensions

Full rated voltage at 85°C-Derate linearly to 50% - rated voltage at 125°C

Type DSF Polyester Capacitors

Specifications

1.0

S±0.8

L max

H max

20 min

T max

0.5 ±

.05mm

Cap. Catalog THLS Cap. Catalog THLS

(µF ) Part Number Inches(mm) Inches(mm) Inches(mm) Inches(mm) (µF ) Part Number Inches(mm) In. (mm) Inches(mm) Inches(mm)

50 Vdc 1.20

DSF050J125 0.256 (6.5) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

0.01

DSF050J103 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 1.50

DSF050J155 0.283 (7.2) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

0.01

DSF050J123 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 1.80

DSF050J185 0.283 (7.2) 0.472 (12.0) 0.402 (10.2) 0.295 (7.5)

0.01

DSF050J153 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 2.20

DSF050J225 0.311 (7.9) 0.472 (12.0) 0.402 (10.2) 0.295 (7.5)

0.01

DSF050J183 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 100 Vdc

0.02

DSF050J223 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.01

DSF100J103 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.02

DSF050J273 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.01

DSF100J123 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.03

DSF050J333 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.01

DSF100J153 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.03

DSF050J393 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.01

DSF100J183 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.04

DSF050J473 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.02

DSF100J223 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.05

DSF050J563 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.02

DSF100J273 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.06

DSF050J683 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.03

DSF100J333 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.08

DSF050J823 0.142 (3.6) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.03

DSF100J393 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.10

DSF050J104 0.157 (4.0) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.04

DSF100J473 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.12

DSF050J124 0.157 (4.0) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.05

DSF100J563 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.15

DSF050J154 0.173 (4.4) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.06

DSF100J683 0.157 (4.0) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.18

DSF050J184 0.177 (4.5) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.08

DSF100J823 0.161 (4.1) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.22

DSF050J224 0.189 (4.8) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.10

DSF100J104 0.177 (4.5) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0)

0.27

DSF050J274 0.181 (4.6) 0.276 (7.0) 0.287 (7.3) 0.197 (5.0) 0.12

DSF100J124 0.130 (3.3) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.33

DSF050J334 0.205 (5.2) 0.276 (7.0) 0.287 (7.3) 0.197 (5.0) 0.15

DSF100J154 0.130 (3.3) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.39

DSF050J394 0.224 (5.7) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.18

DSF100J184 0.142 (3.6) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.47

DSF050J474 0.236 (6.0) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.22

DSF100J224 0.157 (4.0) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.56

DSF050J564 0.228 (5.8) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.27

DSF100J274 0.165 (4.2) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5)

0.68

DSF050J684 0.256 (6.5) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.33

DSF100J334 0.189 (4.8) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

0.82

DSF050J824 0.268 (6.8) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.39

DSF100J394 0.217 (5.5) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5)

1.00

DSF050J105 0.315 (8.0) 0.433 (11.0) 0.287 (7.3) 0.197 (5.0) 0.47

DSF100J474 0.268 (6.8) 0.413 (10.5) 0.402 (10.2) 0.295 (7.5)

CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com

RoHS Compliant

050 = 50 Vdc

100 = 100 Vdc

Voltage

Code Capacitance

Tolerance

J = ±5%

Nominal

Capacitance

(First two digits are significant

figures. Last digit is multiplier

to give cap in pF)

e.g. 223 = 22 X 103 pF = .022 µF

104 = 10 X 104 pF = .100 µF

155 = 15 X 105 pF = 1.50 µF

Dipped

Stacked

Film

Type

DSF 050 J 223 C

Bulk and Ammo

Packaging Options

Blank = Straight lead, Bulk

C = Crimped, Bulk

CA = Crimped Lead, Ammo Pack

TA = Straight Lead, Ammo Pack

Tape & Reel packaging available.

Type DSF Polyester Capacitors

Crimped Lead Ammo Pack Option (CA) Straight Lead Ammo Pack Option (TA)

Crimp style depends on capacitor length.

Bulk Cut & Crimp Styles

≤

10.0 mm L >10.0 mm

PACKAGE QUANTITY FOR AMMO PACK

CRIMPED LEAD OPTION (CA) & (CR)

WVDC Capacitance Range Quantity

50 0.01 - 0.12 2000

0.15 - 2.2 1000

100 0.01 - 0.068 2000

0.082 - 0.1 1000

0.12 - 0.22 2000

0.27 - 0.47 1000

AMMO PACK TAPING SPECIFICATIONS

Dimensions Dimensions Tol.

for Crimped for Straight (mm)

Option (CA) Lead Option (TA)

Lead Spacing (F)

5.0 5.0 +.8/-.2

Capacitor Pitch (P)

12.7 12.7 ±.1

Feed Hole Pitch(Po)

12.7 12.7 ±.2

Carrier Width (W)

18.0 18.0 ±.5

Feed Hole Position

(W1)

9.0 9.0 ±.5

Height of Seating

Plane(H1)

20.0 20.0 ±.5

Lead Wire Clinch

Height (Ho)

16.0 --- ±.5

Feed Hole

Diameter (Do)

4.0 4.0 ±.2

Case Top to Feed

Hole (H2) Max.

20.5 + Hmax 20.5 + Hmax Max.

PACKAGE QUANTITY FOR AMMO PACK

STRAIGHT LEAD OPTION (TA) & (TR)

WVDC Capacitance Range Quantity

50 0.01 - 0.12 2000

0.15 to 1.0 1000

100 0.01 - 0.068 2000

0.082 - 0.1 1000

WVDC H3 max. (mm)

50 H+4.5

100 H+5.0

Ammo Pack Options

CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com

Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The

customer is responsible for checking, conrming and verifying the extent to which the Information con-

tained in this datasheet or other publication is applicable to an order at the time the order is placed. All

Information given herein is believed to be accurate and reliable, but it is presented without any guaran-

tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability

for certain applications are based on the knowledge that the Cornell Dubilier company providing such

statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards

as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-

tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specic customer application, use, storage,

transportation, or operating environment. The Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference

to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),

and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although

Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design

and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should

employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies

or other appropriate protective measures) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage. Although all product-related warnings,

cautions and notes must be observed, the customer should not assume that all safety measures are indi-

cated in such warnings, cautions and notes, or that other safety measures may not be required.