MULTILAYER CERAMIC ANTENNA FOR BLUETOOTH & WLAN IEEE 802.11b (2.45G Hz ISM Band) (Long Shape) Product Specification1 (Preliminary) QUICK REFERENCE DATA Dimension 8* 3.5 * 0.9 mm Central Frequency* 2.45 GHz Bandwidth >100 MHz Gain 0dBi max VSWR 2.0 max Polarization Linear Azimuth Omni-directional Impedance 50 Operating Temperature -55~125 oC Termination Ni/Sn (Environmentally-Friendly Leadless) Resistance to soldering heat 260oC, 10 sec. Maximum Power 1W * Three types of antenna are available for central frequency adjustment (type 245, type 260, type 270) Special Environmental Concerns- Green Products Design: The foil making process is using environmentally-friendly aqueous solvent technology. Termination is lead free (Pb free) and packing materials can be re-cycled 1 All the technical data and information contained herein are subject to change without priot notice Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff spec.doc 2001-08-06 Phycomp Taiwan Ltd. Page 1 sheet 190-1 A4 APPLICATION 8mm Suggested Layout Ground plane(back side) 2mm Cleanance 6mm Antenna Bluetooth module or other RF Module 6mm Cleanance 50Ohm Transmission Line (by Microstrip Line or Coplanar Waveguide) DIMENSIONAL DATA Figure Dimension s1 s1 C L F L 80.25 mm - W 3.50.2 mm - T 0.90.2 mm - F 1.250.25 mm C S1 C T Port Feed Termination 0.50.3 mm 1.250.25 mm NC Solder Termination W F HF R&D Print date 01/12/13 Preliminary internal use only Long Shape Multilayer Ceramic Antenna for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff spec.doc 2001-08-06 Phycomp Taiwan Ltd. Aug. 6, 01 4311 115 00245/260/270 Page 2 sheet 190-2 A4 SOLDER LAND PATTERN Figure L F S1 C Remark Dimensions L 9 0.10 mm F 1.40 0.10 mm C 0.90 0.10 mm S1 1.40 0.10 mm Feed Pad NC Mount Pad C Radiation Pattern Polar plot E Plane HF R&D H Plane Print date 01/12/13 Preliminary internal use only Long Shape Multilayer Ceramic Antenna for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff spec.doc 2001-08-06 Phycomp Taiwan Ltd. Aug. 6, 01 4311 115 00245/260/270 Page 3 sheet 190-3 A4 STANDARD TEST BOARD FOR SWR (Note: Only for SWR Measurement, not for suggested layout) 23 mm 5 mm 2.6mm SMA 15 mm 1.2 mm Material:FR4 PCB 0.8 mm HF R&D 50 ohm transmission line Print date 01/12/13 Preliminary internal use only Long Shape Multilayer Ceramic Antenna for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff spec.doc 2001-08-06 Phycomp Taiwan Ltd. Aug. 6, 01 4311 115 00245/260/270 Page 4 sheet 190-4 A4 IEC 384-10/ CECC 32 100 CLAUSE RELIABILITY DATA (Reference to IEC Specification) IEC 60068-2 TEST PROCEDURE REQUIREMENTS TEST METHOD 4.4 Mounting 4.5 4.6.1 Visual inspection and dimension check Antenna 4.8 Adhesion 4.9 Bond strength of plating on end face The antenna can be mounted on printedcircuit boards or ceramic substrates by applying wave soldering, reflow soldering (including vapour phase soldering) or conductive adhesive Any applicable method using x 10 magnification Frequency = 2.45 GHz; at 20 oC A force of 3 N applied for 10 s to the line joining the terminations and in a plane parallel to the substrate Mounted in accordance with CECC 32 100, paragraph 4.4 Conditions: bending 0.5 mm at a rate of 1mm/s, radius jig. 340 mm, 2mm warp on FR4 board of 90 mm length 4.10 20(Tb) Resistance to soldering heat No visible damage In accordance with specification (chip off 4mm) Standard test board in page 4 No visible damage No visible damage No visible damage 260 5 C for 10 0.5 s The terminations shall be well tinned in a static solder bath after recovery and Central Freq. Change 6% HF R&D Print date 01/12/13 Preliminary internal use only Long Shape Multilayer Ceramic Antenna for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff spec.doc 2001-08-06 Phycomp Taiwan Ltd. Aug. 6, 01 4311 115 00245/260/270 Page 5 sheet 190-5 A4 IEC IEC 384-10/ CECC 32 100 CLAUSE 60068-2 TEST METHOD TEST Resistance to leaching 4.11 20(Ta) Solderability 4.12 4(Na) Rapid change of temperature 4.14 3(Ca) Damp heat PROCEDURE REQUIREMENTS 260 5 C for 30 1 s in a static solder bath Using visual enlargement of x 10, dissolution of the termination shall not exceed 10% Zero hour test, and test The termination must after storage (20 to 24 be well tinned, at months) in original least 75% is well atmosphere; un-mounted tinned at termination chips completely immersed for 2 0.5 s in 235 5C. No visible damage -55 C (30 minutes) to Central Freq. Change +125 C (30 minutes); 6% 100 cycles 500 12 hours at 60 C; No visible damage 2 hours recovery 90 to 95 % RH Central Freq. Change 6% 4.15 500 12 hours at 125 C; Endurance No visible damage 2 hours recovery Central Freq. Change 6% HF R&D Print date 01/12/13 Preliminary internal use only Long Shape Multilayer Ceramic Antenna for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff spec.doc 2001-08-06 Phycomp Taiwan Ltd. Aug. 6, 01 4311 115 00245/260/270 Page 6 sheet 190-6 A4 ORDERING INFORMATION: Method I- by 12NC Ordering Code The antennas may be ordered by using the 12 NC ordering code. These code numbers can be determined by the following rules: 4311 1 15 00 245 F C MS T A F. Family Code 43 = Antenna C. Packing Type Code 11 = 180 mm/ 7" blister (1000pcs) , 12 = 330 mm/13" blister (4000 pcs) 13 = Bulk (1000 pcs) M. Materials Code 1 = High Frequency Material S. Size Code 15 = 8 * 3.5 * 0.9 mm T. Tolerance 00 = 100 M Hz Band Width A. Working Frequency (three types of antenna are available) 245 = 2.45 GHz Type 245 260 = (2.45+0.15) GHz * Intention for shift up 150MHz Type 260 270 = (2.45+0.25) GHz * Intention for shift up 250MHz Type 270 Example: 12NC 4311 111 00245 Product description: Antenna (43) by 180 mm blister (11) of High Frequency Material (1), Size 7.35*5.5*1.3 mm (1); Tolerance (00) of 100 MHz (VSWR<2) Working Frequency (245) = 2.45G Hz ORDERING INFORMATION: Method II- by Clear Text Code The antennas may be ordered by using the 16-digit clear text ordering code. These code numbers can be determined by the following rules: AN2450000708031K (Clear Text Code Example) AN Product AN= Antenna 2450 Central Freq. 2450=2.45GHz 2600=2.60GHz 2700=2.70GHz HF R&D 00 Bandwidth 00= >100MHz 07 Material 07=K7 Print date 01/12/13 Grant Lin/Cliff 2001-08-06 Phycomp Taiwan Ltd. 1 Quantities 1 = 1K 4 = 4K K Packing K=7" plastic F =13" plastic B = Bulk Preliminary internal use only Long Shape Multilayer Ceramic Antenna for Bluetooth (ISM Band 2.45GHz) spec.doc 0803 Size 0803=8*3.5* 0.9 mm Aug. 6, 01 4311 115 00245/260/270 Page 7 sheet 190-7 A4