MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# MMBZ5221BW THRU MMBZ5259BW Features Halogen free available upon request by adding suffix "-HF" Wide Voltage Range Available Small Outline Package For Space Savings High Temp Soldering: 260C for 10 Seconds At Terminals Surface Mount Package Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 * * * * * * * 200 mW Zener Diode 2.4 to 39 Volts Maximum Ratings * * SOT-323 A Operating Junction Temperature: -55C to +150C Storage Temperature: -55C to +150C D Maximum Ratings @ 25oC Unless Otherwise Specified 10 mA Zener Current IF Maximum Forward VF 0.9 V Voltage Power Dissipation Pd 200 mWatt (No te s A) Thermal Resistance 357 K/W Juntion to Ambient Air RthJA (Not e s A) NOTES: A. Mounted on FR4 PC board with our suggested solder pad layout . . B F C E H G J K DIMENSIONS DIM A B C D E F G H J K INCHES MIN MAX .071 .087 .045 .053 .083 .096 .026 Nominal .047 .055 .012 .016 .000 .004 .035 .039 .004 .010 .006 .016 MM MIN MAX 1.80 2.20 1.15 1.35 2.10 2.45 0.65Nominal 1.20 1.40 .30 .40 .000 .100 .90 1.00 .100 .250 .15 .40 NOTE Suggested Solder Pad Layout 0.70 0.90 *Pin Configuration - Top View 1.90 0.65 0.65 Revision: D www.mccsemi.com 1 of 3 2013/09/24 MMBZ5221BW thru MMBZ5259BW MCC Micro Commercial Components ELECTRICAL CHARACTERISTICS @25qC MCC PART NUMBER MMBZ5221BW MMBZ5222BW MMBZ5223BW MMBZ5225BW MMBZ5226BW MMBZ5227BW MMBZ5228BW MMBZ5229BW MMBZ5230BW MMBZ5231BW MMBZ5232BW MMBZ5234BW MMBZ5235BW MMBZ5236BW MMBZ5237BW MMBZ5239BW MMBZ5240BW MMBZ5241BW MMBZ5242BW MMBZ5243BW MMBZ5244BW MMBZ5245BW MMBZ5246BW MMBZ5248BW MMBZ5250BW MMBZ5251BW MMBZ5252BW MMBZ5254BW MMBZ5255BW MMBZ5256BW MMBZ5257BW MMBZ5258BW MMBZ5259BW NOMINAL ZENER VOLTAGE VZ @ IZT MARKING VOLTS 2.4 2.5 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 14 15 16 18 20 22 24 27 28 30 33 36 39 KC1/C1 KC2/C2 KC3/C3 KC5/C5 KG1/D1 KG2/D2 KG3/D3 KG4/D4 KG5/D5 KE1/E1 KE2/E2 KE4/E4 KE5/E5 KF1/F1 KF2/F2 KF4/F4 KF5/F5 KH1/H1 KH2/H2 KH3/H3 KH4/H4 KH5/H5 KJ1/J1 KJ3/J3 KJ5/J5 KK1/K1 KK2/K2 KK4/K4 KK5/K5 KM1/M1 KM2/M2 KM3/M3 KM4/M4 TEST CURRENT IZT mA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9.0 8.5 7.8 7.0 6.2 5.6 5.2 5.0 4.5 4.2 3.8 3.4 3.2 MAXIMUM ZENER IMPEDANCE `B' SUFFIX ONLY ZZT @ IZT ZZK @IZK = 0.25mA OHMS OHMS 30 1200 30 1250 30 1300 29 1600 28 1600 24 1700 23 1900 22 2000 19 1900 17 1600 11 1600 7.0 1000 5.0 750 6.0 500 8.0 500 10 600 17 600 22 600 30 600 13 600 15 600 16 600 17 600 21 600 25 600 29 600 33 600 41 600 44 600 49 600 58 700 70 700 80 800 MAXIMUM REVERSE LEAKAGE CURRENT I R @ VR VOLTS PA 100 1.0 100 1.0 75 1.0 50 1.0 25 1.0 15 1.0 10 1.0 5.0 1.0 5.0 2.0 5.0 2.0 5.0 3.0 5.0 4.0 3.0 5.0 3.0 6.0 3.0 6.5 3.0 7.0 3.0 8.0 2.0 8.4 1.0 9.1 0.5 9.9 0.1 10 0.1 11 0.1 12 0.1 14 0.1 15 0.1 17 0.1 18 0.1 21 0.1 21 0.1 23 0.1 25 0.1 27 0.1 30 Note: 1. Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of 5%. 2. Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body. 4. Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 5. Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5. Revision: D www.mccsemi.com 2 of 3 TM 2013/09/24 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: D 3 of 3 2013/09/24