ALUMINUM ELECTROLYTIC CAPACITORS RU 12.5mmL series RY 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). High Temperature RU Specifications Item Performance Characteristics Category Temperature Range - 40 to + 85C (6.3V to 400V), - 25 to + 85C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 6.8 to 6800F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current 6.3 to 100V 160 to 450V After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. After 1 minute's application of rated voltage, I = 0.04CV+100 (A) or less For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Tangent of loss angle (tan ) Rated voltage (V) Stability at Low Temperature Rated voltage ( V) Impedance ratio Z- 25C / Z+20C ZT / Z20 (MAX.) Z- 40C / Z+20C tan (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 Measurement frequency : 120Hz, Temperature : 20C 35 0.14 50 0.12 63 0.12 100 0.12 160 to 350 400 to 450 0.20 0.25 Measurement frequency : 120Hz 6.3 5 12 10 4 10 The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Endurance 16 3 8 25 2 5 50 to 100 160 to 200 250 to 350 2 3 4 3 4 8 35 2 4 400 6 10 450 15 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 2200F) Radial Lead Type 1 d 2 3 4 5 6 7 8 9 10 11 URU 1 A 2 2 2 M HD D+0.5 MAX Sleeve (P.E.T.) P 0.5 Configuration Capacitance tolerance (20%) Rated capacitance (2200F) Rated voltage (10V) Pressure relief vent Series name L+ MAX 15MIN 4MIN Type (mm) (D < 20) 1.5 (D 20) 2.0 D P d 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10 1.0 22 10 1.0 25 12.5 1.0 Configuration D Pb-free leadwire Pb-free PET sleeve 12.5 to 18 HD 20 to 25 RD * Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Y ALUMINUM ELECTROLYTIC CAPACITORS RU series Dimensions V Cap.(F) 330 470 680 1000 2200 3300 4700 6800 6.3 0J Code 331 471 681 102 222 332 472 682 16 x 12.5 20 x 12.5 25 x 12.5 V Cap.(F) 22 33 47 68 100 220 330 470 680 12.5 x 12.5 18 x 12.5 22 x 12.5 25 x 12.5 06.8 100. 220. 330. 470. Code 6R8 100 220 330 470 12.5 x 12.5 18 x 12.5 20 x 12.5 25 x 12.5 12.5 x 12.5 18 x 12.5 25 x 12.5 16 1C 870 1100 1480 20 x 12.5 25 x 12.5 100 2A 490 710 900 1200 350 2V V Cap.(F) 800 1460 1600 63 1J Code 220 330 470 680 101 221 331 471 681 10 1A 12.5 x 12.5 22 x 12.5 25 x 12.5 330 620 760 400 2G 110 230 230 280 16 x 12.5 20 x 12.5 25 x 12.5 1200 1410 160 2C 12.5 x 12.5 16 x 12.5 18 x 12.5 22 x 12.5 35 1V 25 1E 230 280 330 380 12.5 x 12.5 25 x 12.5 200 2D 12.5 x 12.5 16 x 12.5 18 x 12.5 22 x 12.5 25 x 12.5 750 1380 190 230 280 330 380 12.5 x 12.5 18 x 12.5 250 2E 16 x 12.5 18 x 12.5 20 x 12.5 25 x 12.5 720 850 190 230 280 330 50 1H 12.5 x 12.5 16 x 12.5 20 x 12.5 25 x 12.5 530 600 750 930 Case size D x L (mm) Rated ripple 315 2F 16 x 12.5 20 x 12.5 25 x 12.5 190 230 280 450 110 230 280 2W 12.5 x 12.5 16 x 12.5 22 x 12.5 70 80 160 Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(F) Frequency 100 to 680 1000 to 6800 6.8 to 100 50Hz 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 300Hz 1.23 1.10 1.25 1 kHz 1.34 1.13 1.40 10 kHz or more 1.50 1.15 1.60 CAT.8100Y