Miniature Basic Switch D3V Reliable Basic Switch with External Lever * Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with self-cleaning contacts. 0.1 A utilizes gold alloy crossbar contacts for high reliability at low loads. * Available with internally or externally fitted levers, and 2 fixing positions for external levers. * Conforms to EN61058-1 UL1054. * High Temperature models rated up to 200C (D3V-6, D3V-01) and 155C (D3V-11) are available. * RoHS Compliant. Ordering Information Model Number Legend D3V - 1 2 3 4 1. 5 6 7 Ratings 21: 20 (4) A at 250 VAC 16: 16 (3) A at 250 VAC 11: 11 (3) A at 250 VAC 6: 6 (2) A at 250 VAC 01: 0.1 A at 125 VAC 2. Contact Gap None: 1 mm (F gap) G: 0.5 mm (G gap) 3. Actuator None: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Short hinge roller lever 6: Hinge roller lever 4. 8 9 10 5. Contact Form 1: SPDT 2: SPST-NC 3: SPST-NO 6. Terminals A: Solder terminals C2: Quick-connect terminal (#187) C: Quick-connect terminal (#250) C6: RAST5 terminal (#250) Maximum Operating Force 5: 200 gf 4A: 125 gf 4: 100 gf 3: 50 gf 2: 25 gf 7. Note: These OF values are for the pin plunger models. 8. Enclosure Material None: Standard T: High Temperature 200C for D3V-6, D3V-01 155C for D3V-11 W2: 9. EN60695-2-11/-12 Approved (Glow wire flammability test method with PTI = 250) Mounting Hole Size None: 3.1 mm K: 2.9 mm 10. Special Code None: Standard H: High Temperature (125C) E: Special Rating: 21 (8) A (D3V-21, only) Hinge Position None: Internal / Far from Plunger M: External / Far from Plunger K: External / Near Plunger Miniature Basic Switch D3V 73 Available Combinations Model D3V-21 21 A Rated current OF Contact gap Heat resistance Terminals 125 gf D3V-16 D3V-11 D3V-6 D3V-01 16 A 11 A 6A 0.1 A 200 gf 100 gf 200 gf 100 gf 50 gf 200 gf 100 gf 50 gf F/G F/G F/G F G G F G G G F G 1 mm or 1 mm or 1 mm or 0.5 mm 1 mm 0.5 mm 1 mm 0.5 mm 0.5 mm 0.5 mm 1 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm #187 #250 RAST5 #187 #250 RAST5 EN60695-2-11 approved W2: 105C F/G 1 mm or 0.5 mm #250 EN60695-2-11 approved W2: 85C 25 gf Standard (85C) #187 Standard (105C) 50 gf #187 #250 RAST5 High temperature H: 125C #187 #250 High temperature T: 155C #187 #250 #187 #250 RAST5 RAST5 High temperature T: 200C RAST5 Note: 1. : Available model. 2. Consult OMRON for specific models with standard approval. List of Models 21 A (OF: 125 gf) Actuator --- Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 74 Hinge position (far from plunger) Miniature Basic Switch Contact form SPDT SPST-NC D3V-21G-1@4A-D-N D3V-21G-2@4A-D-N Internal D3V-21G1-1@4A-D-N D3V-21G1-2@4A-D-N External (M) D3V-21G1M-1@4A-D-N D3V-21G1M-2@4A-D-N Internal D3V-21G2-1@4A-D-N External (M) D3V-21G2M-1@4A-D-N D3V-21G2M-2@4A-D-N D3V-21G2-2@4A-D-N Internal D3V-21G3-1@4A-D-N External (M) D3V-21G3M-1@4A-D-N D3V-21G3M-2@4A-D-N D3V-21G3-2@4A-D-N D3V-21G4-2@4A-D-N SPST-NO D3V-21G-3@4A-D-N D3V-21G1-3@4A-D-N D3V-21G1M-3@4A-D-N D3V-21G2-3@4A-D-N D3V-21G2M-3@4A-D-N D3V-21G3-3@4A-D-N D3V-21G3M-3@4A-D-N Internal D3V-21G4-1@4A-D-N External (M) D3V-21G4M-1@4A-D-N D3V-21G4M-2@4A-D-N D3V-21G4M-3@4A-D-N D3V-21G5-3@4A-D-N Internal D3V-21G5-1@4A-D-N External (M) D3V-21G5M-1@4A-D-N D3V-21G5M-2@4A-D-N D3V-21G5M-3@4A-D-N Internal D3V-21G6-1@4A-D-N D3V-21G6-3@4A-D-N External (M) D3V-21G6M-1@4A-D-N D3V-21G6M-2@4A-D-N D3V D3V-21G5-2@4A-D-N D3V-21G4-3@4A-D-N D3V-21G6-2@4A-D-N D3V-21G6M-3@4A-D-N 16 A (OF: 200 gf) Actuator Hinge position (far from plunger) Contact form SPST-NC D3V-16-2@5--D-N SPST-NO D3V-16-3@5--D-N Pin plunger --- SPDT D3V-16-1@5--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-161-1@5--D-N D3V-161M-1@5--D-N D3V-162-1@5--D-N D3V-162M-1@5--D-N D3V-163-1@5--D-N D3V-163M-1@5--D-N D3V-161-2@5--D-N D3V-161M-2@5--D-N D3V-162-2@5--D-N D3V-162M-2@5--D-N D3V-163-2@5--D-N D3V-163M-2@5--D-N D3V-161-3@5--D-N D3V-161M-3@5--D-N D3V-162-3@5--D-N D3V-162M-3@5--D-N D3V-163-3@5--D-N D3V-163M-3@5--D-N Internal External (M) Internal External (M) D3V-164-1@5--D-N D3V-164M-1@5--D-N D3V-165-1@5--D-N D3V-165M-1@5--D-N D3V-164-2@5--D-N D3V-164M-2@5--D-N D3V-165-2@5--D-N D3V-165M-2@5--D-N D3V-164-3@5--D-N D3V-164M-3@5--D-N D3V-165-3@5--D-N D3V-165M-3@5--D-N Internal External (M) D3V-166-1@5--D-N D3V-166M-1@5--D-N D3V-166-2@5--D-N D3V-166M-2@5--D-N D3V-166-3@5--D-N D3V-166M-3@5--D-N Contact form SPST-NC D3V-16-2@4--D-N SPST-NO D3V-16-3@4--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 16 A (OF: 100 gf) Actuator Hinge position (far from plunger) Pin plunger --- SPDT D3V-16-1@4--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-161-1@4--D-N D3V-161M-1@4--D-N D3V-162-1@4--D-N D3V-162M-1@4--D-N D3V-163-1@4--D-N D3V-163M-1@4--D-N D3V-161-2@4--D-N D3V-161M-2@4--D-N D3V-162-2@4--D-N D3V-162M-2@4--D-N D3V-163-2@4--D-N D3V-163M-2@4--D-N D3V-161-3@4--D-N D3V-161M-3@4--D-N D3V-162-3@4--D-N D3V-162M-3@4--D-N D3V-163-3@4--D-N D3V-163M-3@4--D-N Internal External (M) Internal External (M) D3V-164-1@4--D-N D3V-164M-1@4--D-N D3V-165-1@4--D-N D3V-165M-1@4--D-N D3V-164-2@4--D-N D3V-164M-2@4--D-N D3V-165-2@4--D-N D3V-165M-2@4--D-N D3V-164-3@4--D-N D3V-164M-3@4--D-N D3V-165-3@4--D-N D3V-165M-3@4--D-N Internal External (M) D3V-166-1@4--D-N D3V-166M-1@4--D-N D3V-166-2@4--D-N D3V-166M-2@4--D-N D3V-166-3@4--D-N D3V-166M-3@4--D-N Contact form SPST-NC D3V-11-2@5--D-N SPST-NO D3V-11-3@5--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 11 A (OF: 200 gf) Actuator Hinge position (far from plunger) Pin plunger --- SPDT D3V-11-1@5--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-111-1@5--D-N D3V-111M-1@5--D-N D3V-112-1@5--D-N D3V-112M-1@5--D-N D3V-113-1@5--D-N D3V-113M-1@5--D-N D3V-111-2@5--D-N D3V-111M-2@5--D-N D3V-112-2@5--D-N D3V-112M-2@5--D-N D3V-113-2@5--D-N D3V-113M-2@5--D-N D3V-111-3@5--D-N D3V-111M-3@5--D-N D3V-112-3@5--D-N D3V-112M-3@5--D-N D3V-113-3@5--D-N D3V-113M-3@5--D-N Internal External (M) Internal External (M) D3V-114-1@5--D-N D3V-114M-1@5--D-N D3V-115-1@5--D-N D3V-115M-1@5--D-N D3V-114-2@5--D-N D3V-114M-2@5--D-N D3V-115-2@5--D-N D3V-115M-2@5--D-N D3V-114-3@5--D-N D3V-114M-3@5--D-N D3V-115-3@5--D-N D3V-115M-3@5--D-N Internal External (M) D3V-116-1@5--D-N D3V-116M-1@5--D-N D3V-116-2@5--D-N D3V-116M-2@5--D-N D3V-116-3@5--D-N D3V-116M-3@5--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever * The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) C6 RAST5 terminals (#250) * The in the model number is for the enclosure material None: Standard T: High Temperature (200C for D3V-6/-01, 155C for D3V-11) W2: EN60695-2-11/-12 conformity with PTI=250 * The in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm * The in the model number is for the special code None: Standard H: High Temperature (125C) E: Special rating of 21A (8)A (for D3V-21 only) Miniature Basic Switch D3V 75 11 A (OF: 100 gf) Actuator Hinge position (far from plunger) Contact form SPST-NC D3V-11-2@4--D-N SPST-NO D3V-11-3@4--D-N Pin plunger --- SPDT D3V-11-1@4--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-111-1@4--D-N D3V-111M-1@4--D-N D3V-112-1@4--D-N D3V-112M-1@4--D-N D3V-113-1@4--D-N D3V-113M-1@4--D-N D3V-111-2@4--D-N D3V-111M-2@4--D-N D3V-112-2@4--D-N D3V-112M-2@4--D-N D3V-113-2@4--D-N D3V-113M-2@4--D-N D3V-111-3@4--D-N D3V-111M-3@4--D-N D3V-112-3@4--D-N D3V-112M-3@4--D-N D3V-113-3@4--D-N D3V-113M-3@4--D-N Internal External (M) Internal External (M) D3V-114-1@4--D-N D3V-114M-1@4--D-N D3V-115-1@4--D-N D3V-115M-1@4--D-N D3V-114-2@4--D-N D3V-114M-2@4--D-N D3V-115-2@4--D-N D3V-115M-2@4--D-N D3V-114-3@4--D-N D3V-114M-3@4--D-N D3V-115-3@4--D-N D3V-115M-3@4--D-N Internal External (M) D3V-116-1@4--D-N D3V-116M-1@4--D-N D3V-116-2@4--D-N D3V-116M-2@4--D-N D3V-116-3@4--D-N D3V-116M-3@4--D-N Contact form SPST-NC D3V-11G-2@3--D-N SPST-NO D3V-11G-3@3--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 11 A (OF: 50 gf) Actuator Hinge position (far from plunger) Pin plunger --- SPDT D3V-11G-1@3--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-11G1-1@3--D-N D3V-11G1M-1@3--D-N D3V-11G2-1@3--D-N D3V-11G2M-1@3--D-N D3V-11G3-1@3--D-N D3V-11G3M-1@3--D-N D3V-11G1-2@3--D-N D3V-11G1M-2@3--D-N D3V-11G2-2@3--D-N D3V-11G2M-2@3--D-N D3V-11G3-2@3--D-N D3V-11G3M-2@3--D-N D3V-11G1-3@3--D-N D3V-11G1M-3@3--D-N D3V-11G2-3@3--D-N D3V-11G2M-3@3--D-N D3V-11G3-3@3--D-N D3V-11G3M-3@3--D-N Internal External (M) Internal External (M) D3V-11G4-1@3--D-N D3V-11G4M-1@3--D-N D3V-11G5-1@3--D-N D3V-11G5M-1@3--D-N D3V-11G4-2@3--D-N D3V-11G4M-2@3--D-N D3V-11G5-2@3--D-N D3V-11G5M-2@3--D-N D3V-11G4-3@3--D-N D3V-11G4M-3@3--D-N D3V-11G5-3@3--D-N D3V-11G5M-3@3--D-N Internal External (M) D3V-11G6-1@3--D-N D3V-11G6M-1@3--D-N D3V-11G6-2@3--D-N D3V-11G6M-2@3--D-N D3V-11G6-3@3--D-N D3V-11G6M-3@3--D-N Contact form SPST-NC D3V-6-2@4--D-N SPST-NO D3V-6-3@4--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 6 A (OF: 100 gf) Actuator Hinge position (far from plunger) Pin plunger --- SPDT D3V-6-1@4--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-61-1@4--D-N D3V-61M-1@4--D-N D3V-62-1@4--D-N D3V-62M-1@4--D-N D3V-63-1@4--D-N D3V-63M-1@4--D-N D3V-61-2@4--D-N D3V-61M-2@4--D-N D3V-62-2@4--D-N D3V-62M-2@4--D-N D3V-63-2@4--D-N D3V-63M-2@4--D-N D3V-61-3@4--D-N D3V-61M-3@4--D-N D3V-62-3@4--D-N D3V-62M-3@4--D-N D3V-63-3@4--D-N D3V-63M-3@4--D-N Internal External (M) Internal External (M) D3V-64-1@4--D-N D3V-64M-1@4--D-N D3V-65-1@4--D-N D3V-65M-1@4--D-N D3V-64-2@4--D-N D3V-64M-2@4--D-N D3V-65-2@4--D-N D3V-65M-2@4--D-N D3V-64-3@4--D-N D3V-64M-3@4--D-N D3V-65-3@4--D-N D3V-65M-3@4--D-N Internal External (M) D3V-66-1@4--D-N D3V-66M-1@4--D-N D3V-66-2@4--D-N D3V-66M-2@4--D-N D3V-66-3@4--D-N D3V-66M-3@4--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever * The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) C6 RAST5 terminals (#250) * The in the model number is for the enclosure material None: Standard T: High Temperature (200C for D3V-6/-01, 155C for D3V-11) W2: EN60695-2-11/-12 conformity with PTI=250 76 Miniature Basic Switch D3V * The in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm * The in the model number is for the special code None: Standard H: High Temperature (125C) E: Special rating of 21A (8)A (for D3V-21 only) 6 A (OF: 50 gf) Actuator Hinge position (far from plunger) Contact form SPST-NC D3V-6G-2@3--D-N SPST-NO D3V-6G-3@3--D-N Pin plunger --- SPDT D3V-6G-1@3--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-6G1-1@3--D-N D3V-6G1M-1@3--D-N D3V-6G2-1@3--D-N D3V-6G2M-1@3--D-N D3V-6G3-1@3--D-N D3V-6G3M-1@3--D-N D3V-6G1-2@3--D-N D3V-6G1M-2@3--D-N D3V-6G2-2@3--D-N D3V-6G2M-2@3--D-N D3V-6G3-2@3--D-N D3V-6G3M-2@3--D-N D3V-6G1-3@3--D-N D3V-6G1M-3@3--D-N D3V-6G2-3@3--D-N D3V-6G2M-3@3--D-N D3V-6G3-3@3--D-N D3V-6G3M-3@3--D-N Internal External (M) Internal External (M) D3V-6G4-1@3--D-N D3V-6G4M-1@3--D-N D3V-6G5-1@3--D-N D3V-6G5M-1@3--D-N D3V-6G4-2@3--D-N D3V-6G4M-2@3--D-N D3V-6G5-2@3--D-N D3V-6G5M-2@3--D-N D3V-6G4-3@3--D-N D3V-6G4M-3@3--D-N D3V-6G5-3@3--D-N D3V-6G5M-3@3--D-N Internal External (M) D3V-6G6-1@3--D-N D3V-6G6M-1@3--D-N D3V-6G6-2@3--D-N D3V-6G6M-2@3--D-N D3V-6G6-3@3--D-N D3V-6G6M-3@3--D-N Contact form SPST-NC D3V-01-2@3--D-N SPST-NO D3V-01-3@3--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 01 A (OF: 50 gf) Actuator Hinge position (far from plunger) Pin plunger --- SPDT D3V-01-1@3--D-N Short hinge lever Internal External (M) Internal External (M) Internal External (M) D3V-011-1@3--D-N D3V-011M-1@3--D-N D3V-012-1@3--D-N D3V-012M-1@3--D-N D3V-013-1@3--D-N D3V-013M-1@3--D-N D3V-011-2@3--D-N D3V-011M-2@3--D-N D3V-012-2@3--D-N D3V-012M-2@3--D-N D3V-013-2@3--D-N D3V-013M-2@3--D-N D3V-011-3@3--D-N D3V-011M-3@3--D-N D3V-012-3@3--D-N D3V-012M-3@3--D-N D3V-013-3@3--D-N D3V-013M-3@3--D-N Internal External (M) Internal External (M) D3V-014-1@3--D-N D3V-014M-1@3--D-N D3V-015-1@3--D-N D3V-015M-1@3--D-N D3V-014-2@3--D-N D3V-014M-2@3--D-N D3V-015-2@3--D-N D3V-015M-2@3--D-N D3V-014-3@3--D-N D3V-014M-3@3--D-N D3V-015-3@3--D-N D3V-015M-3@3--D-N Internal External (M) D3V-016-1@3--D-N D3V-016M-1@3--D-N D3V-016-2@3--D-N D3V-016M-2@3--D-N D3V-016-3@3--D-N D3V-016M-3@3--D-N SPDT D3V-01-1@2--D-N Contact form SPST-NC D3V-01-2@2--D-N SPST-NO D3V-01-3@2--D-N Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 01 A (OF: 25 gf) Actuator Pin plunger Hinge position (far from plunger) --- * The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) C6 RAST5 terminals (#250) * The in the model number is for the enclosure material None: Standard T: High Temperature (200C for D3V-6/-01, 155C for D3V-11) W2: EN60695-2-11/-12 conformity with PTI=250 * The in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm * The in the model number is for the special code None: Standard H: High Temperature (125C) E: Special rating of 21A (8)A (for D3V-21 only) Miniature Basic Switch D3V 77 Specifications Ratings Type D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Rated voltage 250 VAC 8 VDC 30 VDC 125 VDC 250 VDC 250 VAC 8 VDC 30 VDC 125 VDC 250 VDC 250 VAC 8 VDC 30 VDC 125 VDC 250 VDC 250 VAC 8 VDC 30 VDC 125 VDC 250 VDC 125 VAC 8 VDC 30 VDC Non-inductive load Resistive load Lamp load NC NO NC NO 21 A 3A 21 A 5A 14 A 5A 0.6 A 0.1 A 0.3 A 0.05 A 16 A 2A 16 A 4A 10 A 4A 0.6 A 0.1 A 0.3 A 0.05 A 11 A 1.5 A 11 A 3A 6A 3A 0.6 A 0.1 A 0.3 A 0.05 A 6A 3A 6A 3A 6A 3A 0.4 A 0.1 A 0.3 A 0.05 A 0.1 A --0.1 A --0.1 A Inductive load Inductive load Motor load NC NO NC NO 12 A 4A 12 A 7A 12 A 5A 0.6 A 0.1 A 0.3 A 0.05 A 10 A 3A 10 A 6A 10 A 4A 0.6 A 0.1 A 0.3 A 0.05 A 6A 2A 6A 3A 6A 3A 0.6 A 0.1 A 0.3 A 0.05 A 4A --4A 4A --0.4 A 0.2 A ------- --- Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current values of models with a contact gap of 0.5 mm (gap G). 2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. 5. The ratings values apply under the following test conditions: Ambient temperature: 202C, Ambient humidity: 655%, Operating frequency: 30 operations/min Approved Standards UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642) (Only standard ratings are listed.) Rated voltage 125 VAC 250 VAC 125 VDC 250 VDC D3V-21G D3V-16 3/4 HP 16 A, 1/2 HP 20.1 A, 3/4 HP 16 A, 1/2 HP --0.6 A --0.3 A D3V-16G 16 A, 1/2 HP 16 A, 1/2 HP 0.1 A --- D3V-11 11 A, 1/2 HP 11 A, 1/2 HP 0.6 A 0.3 A D3V-11G 11 A, 1/2 HP 11 A, 1/2 HP 0.1 A --- D3V-6 6 A, 1/4 HP 6 A, 1/4 HP ----- D3V-6G 6 A, 1/4 HP 6 A, 1/4 HP ----- D3V-01 0.1 A ------- EN 61058-1: 1992+A1: 1993 (License No. 119151L) Rated voltage 125 VAC 250 VAC 250 VAC D3V-21G --20 (4) A 21 (8) A** D3V-16 --16 (3) A D3V-11 --11 (3) A D3V-6 --6 (2) A D3V-01 0.1 A --- Testing conditions: 50,000 operations, T85 (0C to 85C) for D3V-21/D3V-01, T105 (0C to 105C) for D3V-16/D3V-11/D3V-6 and T200 (0 to 200C) for D3V-6/-01 with suffix "T", T155 (0 to 155C) for D3V-11 with suffix "T". **Testing conditions: 10,000 operations, T85 (0C to 85C) EN 60695-2-11 Ed.2, EN 60695-2-12 Ed.2 - - Glow-wire flammability test methods Rated voltage 125 VAC 250 VAC 78 D3V-16 --16 (3) A Miniature Basic Switch D3V-11 --11 (3) A D3V D3V-6 --6 (2) A D3V-01 0.1 A --- Characteristics Operating speed Operating frequency 0.1 mm to 1 m/s (plunger models) Mechanical: 600 operations/min Electrical: 60 operations/min 100 M min. (at 500 VDC) D3V-21: Insulation resistance Contact resistance Dielectric strength (see note 2) Vibration resistance (see note 3) Shock resistance (see note 3) Life expectancy 30 m max. D3V-01, 50 gf versions: 50 m max. 25 gf versions: 100 m max. 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity 2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Destruction: 400 m/s2 (approx. 40G) max. Malfunction: 100 m/s2 (approx. 10G) max. Mechanical: 10,000,000 operations min. Electrical: D3V-21: Degree of protection Degree of protection against electric shock Proof tracking index (PTI) Ambient operating temperature 50 m max. D3V-16, D3V-11, D3V-6: 50,000 operations min. D3V-16: 100,000 operations min. D3V-11: 200,000 operations min. D3V-6, D3V-01: 500,000 operations min. IEC IP40 Class I 250 (High Temperature type with suffix "-T": 175) D3V-21: -25C to 85C with no icing D3V-16: -25C to 105C (High Temperature type "H": -25C to 125C) with no icing D3V-11: -25C to 105C (High Temperature types "H": -25C to 125C, "T": -25C to 155C) with no icing D3V-6: -25C to 105C (High Temperature types "H": -25C to 125C, "T": -25C to 200C) with no icing D3V-01: -25C to 85C (High Temperature type "T": -25C to 200C) with no icing 85% max. (for 5C to 35C) Approx. 6.2 g (plunger models) Ambient operating humidity Weight Note: 1. Data shown are of initial value. 2. The dielectric strength values shown in the table are for models with a Separator. 3. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the total travel position. 4. For testing conditions, contact your OMRON sales representative. Contact Specifications Item Contact D3V-21 D3V-16 D3V-11 Specification Material Gap (standard value) Inrush current NC NO 0.5 mm D3V-6 D3V-01 Rivet Crossbar Silver alloy Gold alloy 1 mm (F gap type) or 0.5 mm (G gap type) 50 A max. Minimum applicable load 40 A max. 24 A max. 1.0 mm 15 A max. --- 160 mA at 5 VDC 1 mA at 5 VDC Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60% (60) reliability level (JIS C5003). The equation 60=0.5 x 10-6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability level of 60% Contact Form SPDT SPST-NC NC SPST-NO NC NO NO COM COM COM Miniature Basic Switch D3V 79 Dimensions Terminals Note: Unless otherwise specified, all units are in millimeters and a tolerance of 0.4 mm applies to all dimensions Terminal type Solder Terminal (A) Quick-connect Terminal (#187) (C2) Quick-connect Terminal (#250) (C) Quick-connect RAST5 Terminals (#250)(C6) COM 16.8 (5.5) (5.5) (4.9) (6.5) (6.5) (7.7) 2.9 3.2 2.9 t = 0.5 (10) Three, solder terminals Terminal dimensions t=0.8 Three quick connect terminals (#250) (12.0) t = 0.8 Three, quick-connect terminals (#250) 8 6.35 3.2 4.750.1 5 15.2 12.8 t = 0.5 (10) Three, quick-connect terminals (#187) 6.35 3.2 (see note) (3.5) 4.5 3.95 4.750.1 6.350.1 6.30.1 1.6-dia. terminal hole 2.4 dia. 1.6 dia. Note: Indicates the length to the center of the 1.6-dia. holes 1.75-dia. terminal hole 1.65-dia. terminal hole Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For terminal positions, refer to the above Contact Form. Mounting Holes Two, 3.1-dia. mounting holes or M3 screw holes All switches may be panel mounted using M3 mounting screws with plane washers or spring washers to securely mount the switch. Tighten the screws to a torque of 0.39 to 0.59 N*m. 10.30.1 22.20.1 Dimensions and Operating Characteristics Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of 0.4 mm applies to all dimensions 2. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models also incorporate terminals A, C, and C6, which are omitted from the following drawings. Refer to Terminals section for the dimensions of these terminals. 3. The @ in the model number is for the terminal code. 4. The in the model number is for combinations of the enclosure material, the mounting hole size and the special code as indicated in the Model Number Legend and Available Combinations tables. The hole size in the following illustrations of models with a suffix "K" in the is 2.9 mm. 5. The operating characteristics are for operation in the A direction ( ). Plunger Models A Model OF max. RF min. PT max. OT min. MD max. OP 80 D3V-21G-1@4A- D3V-16-1@5- D3V-11-1@5- D3V-11-1@4- D3V-6-1@4- D3V-6G-1@3- D3V-01-1@2- D3V-01-1@3- t=0.5 Three, quick-connect terminals (#187) D3V-21G-1@4A- 125 gf 20 gf 1.2 mm 1.0 mm 0.3 mm D3V-16-1@5- D3V-11-1@5- 200 gf 50 gf Miniature Basic Switch D3V-11-1@4- D3V-6G-1@3- D3V-6-1@4- 100 gf 50 gf 15 gf 5 gf 1.2 mm 1.0 mm 0.4 mm (F gap type) or 0.3 mm (G gap type) 14.70.4 mm D3V D3V-01-1@3- D3V-01-1@2- 50 gf 5 gf 25 gf 3 gf 1.2 mm 1.0 mm 0.4 mm Short Hinge Lever Models 22.1 3.1+0.13 -0.03 dia. hole 1.6 t=0.5 8.1 0.7 2.85 4.2 PT 2.8 4 18.7 A D3V-21G1-1@4A- D3V-161-1@5- D3V-111-1@5- D3V-111-1@4- D3V-61-1@4- D3V-6G1-1@3- D3V-011-1@3- OP 10.30.1 15.9 7.2 3.40.15 dia. hole 22.20.1 27.8 37.80.8 2.8 (10) t=0.5 Three, #187 series tab 3.1+0.13 -0.03 10.3 D3V-21G1M-1@4A- D3V-161M-1@5- D3V-111M-1@5- D3V-111M-1@4- D3V-61M-1@4- D3V-6G1M-1@3- D3V-011M-1@3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G1(M)-1@4A- D3V-161(M)-1@5- D3V-111(M)-1@5- D3V-111(M)-1@4- D3V-61(M)-1@4- OF max. RF min. 125 gf 20 gf 200 gf 50 gf 100 gf 15 gf PT max. OT min. MD max. 1.6 mm 0.8 mm 0.5 mm Model D3V-011(M)-1@3- 50 gf 5 gf 1.6 mm 0.8 mm 0.6 mm (F gap type) or 0.5 mm (G gap type) 1.6 mm 0.8 mm 0.6 mm 15.2 0.5 mm OP 3.1+0.13 -0.03 dia. hole 27.90.8 14.3 t=0.5 8.5 A PT 2.85 4.5 0.7 2.8 4 18.7 10.30.1 15.9 7.2 OP +0.13 t=0.5 Three, #187 series tab 2.8 (10) D3V-21G1K-1@4A- D3V-161K-1@5- D3V-111K-1@5- D3V-111K-1@4- D3V-61K-1@4- OF max. RF min. 85 gf 8 gf 130 gf 16 gf 65 gf 8 gf PT max. OT min. MD max. 3.5 mm 1.1 mm 1.1 mm Model 1.6 D3V-21G1K-1@4A- D3V-161K-1@5- D3V-111K-1@5- D3V-111K-1@4- D3V-61K-1@4- D3V-6G1K-1@3- D3V-011K-1@3- OP D3V-6G1(M)-1@3- 3.40.15 dia. hole 22.20.1 3.1-0.03 10.3 27.8 37.80.8 D3V-6G1K-1@3- D3V-011K-1@3- 35 gf 4 gf 3.5 mm 1.1 mm 1.2 mm (F gap type) or 1.1 mm (G gap type) 3.5 mm 1.1 mm 1.2 mm 15.2 1.2 mm Miniature Basic Switch D3V 81 Hinge Lever Models A D3V-21G2-1@4A- D3V-162-1@5- D3V-112-1@5- D3V-112-1@4- D3V-62-1@4- D3V-6G2-1@3- D3V-012-1@3- 35.60.8 3.1+0.13 -0.03 dia. hole 1.6 t=0.5 0.7 2.85 4.2 2.8 4 18.8 PT 8.1 OP 10.30.1 15.9 7.2 2.8 (10) t=0.5 Three, #187 series tab 3.40.15 dia. hole 22.20.1 27.8 37.80.8 3.1+0.13 -0.03 10.3 A D3V-21G2M-1@4A- D3V-162M-1@5- D3V-112M-1@5- D3V-112M-1@4- D3V-62M-1@4- D3V-6G2M-1@3- D3V-012M-1@3- t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G2(M)-1@4A- D3V-162(M)-1@5- D3V-112(M)-1@5- OF max. RF min. 80 gf 6 gf 125 gf 14 gf PT max. OT min. MD max. 4.0 mm 1.6 mm 0.8 mm Model D3V-112(M)-1@4- D3V-62(M)-1@4- D3V-012(M)-1@3- 60 gf 6 gf 30 gf --- 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) 4.0 mm 1.6 mm 1.5 mm 15.2 1.2 mm OP D3V-21G2K-1@4A- D3V-162K-1@5- D3V-112K-1@5- D3V-112K-1@4- D3V-62K-1@4- D3V-6G2K-1@3- D3V-012K-1@3- A 1.6 0.7 18.7 2.8 (10) D3V-162K-1@5- D3V-112K-1@5- D3V-112K-1@4- D3V-62K-1@4- OF max. RF min. 45 gf 4 gf 70 gf 8 gf 35 gf 4 gf PT max. OT min. MD max. 6.0 mm 2.5 mm 1.3 mm 15.2 2.0 mm Miniature Basic Switch 3.40.15 dia. hole 22.20.1 D3V PT 2.85 4.5 3.1+0.13 -0.03 10.3 27.8 37.80.8 D3V-6G2K-1@3- 6.0 mm 2.5 mm 2.0 mm (F gap type) or 1.3 mm (G gap type) OP t=0.5 2.8 10.30.1 OP 4 15.9 7.2 D3V-21G2K-1@4A- Model 41.40.8 14.3 8.5 3.1 +0.13 -0.03 dia. hole t=0.5 Three, #187 series tab 82 D3V-6G2(M)-1@3- D3V-012K-1@3- 20 gf --6.0 mm 2.5 mm 2.0 mm Long Hinge Lever Models D3V-21G3-1@4A- D3V-163-1@5- D3V-113-1@5- D3V-113-1@4- D3V-63-1@4- D3V-6G3-1@3- D3V-013-1@3- A 3.1+0.13 -0.03 dia. hole 59.40.8 1.6 8.1 0.7 2.85 4.2 PT t=0.5 2.8 4 15.9 7.2 18.7 10.30.1 OP +0.13 3.1-0.03 3.40.15 dia. hole 22.20.1 27.8 2.8 (10) t=0.5 Three, #187 series tab 10.3 37.80.8 D3V-21G3M-1@4A- D3V-163M-1@5- D3V-113M-1@5- D3V-113M-1@4- D3V-63M-1@4- D3V-6G3M-1@3- D3V-013M-1@3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G3(M)-1@4AD D3V-163(M)-1@5-D D3V-113(M)-1@5-D OF max. RF min. 45 gf 3 gf 70 gf 6 gf PT max. OT min. MD max. 9.0 mm 2.0 mm 2.0 mm Model D3V-113(M)-1@4-D D3V-6G3(M)-1@3-D D3V-013(M)-1@3-D D3V-63(M)-1@4-D 35 gf --- 20 gf --- 15.2 2.6 mm +2.6 15.2 -3.2 mm OP 9.0 mm 3.2 mm 2.8 mm 9.0 mm 9.0 mm 2.0 mm 3.2 mm 2.8 mm (F gap type) or 2.0 mm (G gap type) 2.8 mm (F gap type) or 2.0 mm (G gap type) A 3.1+0.13 -0.03 dia. hole 1.6 65.20.8 14.3 t=0.5 8.5 D3V-21G3K-1@4A- D3V-163K-1@5- D3V-113K-1@5- D3V-113K-1@4- D3V-63K-1@4- D3V-6G3K-1@3- D3V-013K-1@3- 2.85 4.5 PT 0.7 2.8 OP 10.30.1 4 15.9 7.2 18.7 2.8 t=0.5 Three, #187 series tab 3.40.15 dia. hole 22.20.1 (10) 3.1+0.13 -0.03 10.3 27.8 37.80.8 D3V-21G3K-1@4A-D D3V-163K-1@5-D D3V-113K-1@5-D D3V-113K-1@4-D D3V-63K-1@4-D OF max. RF min. 20 gf --- 35 gf 4 gf 20 gf --- PT max. OT min. MD max. 15.0 mm 4.0 mm 3.0 mm Model OP D3V-6G3K-1@3-D D3V-013K-1@3-D 10 gf --- 15.0 mm 4.0 mm 3.8 mm (F gap type) or 3.0 mm (G gap type) 15.0 mm 4.0 mm 3.8 mm 15.2 3.0 mm Miniature Basic Switch D3V 83 Simulated Roller Lever Models A 32.50.8 +0.13 3.1-0.03 dia. hole 1.6 D3V-21G4-1@4A- D3V-164-1@5- D3V-114-1@5- D3V-114-1@4- D3V-64-1@4- D3V-6G4-1@3- D3V-014-1@3- 8.1 0.7 2.8 4 18.8 2.85 4.2 PT t=0.5 10.30.1 15.9 7.2 2.8 (10) t=0.5 Three, #187 series tab 3.40.15 dia. hole OP 3.1+0.13 -0.03 10.3 22.20.1 27.8 37.80.8 D3V-21G4M-1@4A- D3V-164M-1@5- D3V-114M-1@5- D3V-114M-1@4- D3V-64M-1@4- D3V-6G4M-1@3- D3V-014M-1@3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G4(M)-1@4A- D3V-164(M)-1@5- D3V-114(M)-1@5- D3V-114(M)-1@4- D3V-64(M)-1@4- OF max. RF min. 85 gf 7 gf 125 gf 14 gf 60 gf 6 gf PT max. OT min. MD max. 4.0 mm 1.6 mm 1.4 mm Model D3V-6G4(M)-1@3- 30 gf --- 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) D3V-21G4K-1@4A- D3V-164K-1@5- D3V-114K-1@5- D3V-114K-1@4- D3V-64K-1@4- D3V-6G4K-1@3- D3V-014K-1@3- A 38.40.8 1.6 0.7 14.3 8.5 18.7 2.8 7.2 2.8 (10) 3.40.15 dia. hole 22.20.1 27.8 37.80.8 D3V-164K-1@5-D D3V-114K-1@5-D D3V-114K-1@4-D D3V-64K-1@4-D OF max. RF min. 55 gf 3 gf 75 gf 10 gf 40 gf 3 gf PT max. OT min. MD max. 8.0 mm 1.5 mm 3.0 mm 8.0 mm 1.5 mm 3.5 mm (F gap type) or 3.0 mm (G gap type) 18.7 1.2 mm Miniature Basic Switch D3V OP 10.30.1 D3V-21G4K-1@4A-D OP 2.85 4.5 PT t=0.5 4 15.9 +0.13 3.1-0.03 dia. hole t=0.5 Three, #187 series tab 84 4.0 mm 1.6 mm 1.5 mm 18.7 1.2 mm OP Model D3V-014(M)-1@3- +0.13 3.1-0.03 10.3 D3V-6G4K-1@3-D D3V-014K-1@3-D 20 gf --8.0 mm 1.5 mm 3.5 mm Short Hinge Roller Lever Models D3V-21G5-1@4A- D3V-165-1@5- D3V-115-1@5- D3V-115-1@4- D3V-65-1@4- D3V-6G5-1@3- D3V-015-1@3- A 8.1 0.7 20.10.8 +0.13 3.1-0.03 dia. hole 1.6 4.8 2.8 OP 10.30.1 4 15.9 7.2 18.8 3.1+0.13 -0.03 3.40.15 dia. hole 22.20.1 27.8 37.80.8 2.8 (10) t=0.5 Three, #187 series tab 10.3 A D3V-21G5M-1@4A- D3V-165M-1@5- D3V-115M-1@5- D3V-115M-1@4- D3V-65M-1@4- D3V-6G5M-1@3- D3V-015M-1@3- t=0.5 Three, quick-connect terminals (#187) D3V-21G5(M)-1@4A- D3V-165(M)-1@5- D3V-115(M)-1@5- D3V-115(M)-1@4- D3V-65(M)-1@4- OF max. RF min. 145 gf 20 gf 240 gf 50 gf 120 gf 15 gf PT max. OT min. MD max. 1.6 mm 0.8 mm 0.5 mm Model 5.1 PT t=0.5 Note: 1. Stainless-steel lever 2. Oilless polyacetar resin roller D3V-6G5(M)-1@3- D3V-015(M)-1@3- 60 gf 6 gf 1.6 mm 0.8 mm 0.6 mm (F gap type) or 0.5 mm (G gap type) OP 1.6 mm 0.8 mm 0.6 mm 20.70.6 mm D3V-21G5K-1@4A- D3V-165K-1@5- D3V-115K-1@5- D3V-115K-1@4- D3V-65K-1@4- D3V-6G5K-1@3- D3V-015K-1@3- A dia. hole 1.6 25.90.8 14.3 t=0.5 8.5 +0.13 3.1-0.03 PT 5.1 0.7 2.8 OP 4 18.8 10.30.1 15.9 7.2 +0.13 t=0.5 Three, #187 series tab 2.8 (10) 3.40.15 dia. hole 22.20.1 27.8 37.80.8 D3V-21G5K-1@4A-D D3V-165K-1@5-D D3V-115K-1@5-D D3V-115K-1@4-D D3V-65K-1@4-D OF max. RF min. 100 gf 8 gf 160 gf 15 gf 80 gf 8 gf PT max. OT min. MD max. 2.6 mm 1.0 mm 8.0 mm Model OP 3.1-0.03 10.3 D3V-6G5K-1@3-D D3V-015K-1@3-D 40 gf 4 gf 2.6 mm 1.0 mm 0.9 mm (F gap type) or 0.8 mm (G gap type) 2.6 mm 1.0 mm 0.9 mm 20.7 1.0 mm Miniature Basic Switch D3V 85 Hinge Roller Lever Models D3V-21G6-1@4A- D3V-166-1@5- D3V-116-1@5- D3V-116-1@4- D3V-66-1@4- D3V-6G6-1@3- D3V-016-1@3- A 33.00.8 +0.13 3.1-0.03 dia. hole 1.6 5.1 PT 4.8 t=0.5 8.1 0.7 2.8 OP 10.30.1 4 15.9 7.2 18.7 +0.13 2.8 (10) t=0.5 Three, #187 series tab 3.1-0.03 3.40.15 dia. hole 10.3 22.20.1 27.8 37.80.8 D3V-21G6M-1@4A- D3V-166M-1@5- D3V-116M-1@5- D3V-116M-1@4- D3V-66M-1@4- D3V-6G6M-1@3- D3V-016M-1@3- A t=0.5 Three, quick-connect terminals (#187) D3V-21G6(M)-1@4A- D3V-166(M)-1@5- D3V-116(M)-1@5- D3V-116(M)-1@4- D3V-66(M)-1@4- OF max. RF min. 80 gf 5 gf 125 gf 14 gf 60 gf 6 gf PT max. OT min. MD max. 4.0 mm 1.6 mm 0.8 mm Model Note: 1. Stainless-steel lever 2. Oilless polyacetar resin roller D3V-6G6(M)-1@3- D3V-016(M)-1@3- 30 gf --- 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) OP 4.0 mm 1.6 mm 1.5 mm 20.71.2 mm +0.13 3.1-0.03 dia. hole 1.6 A D3V-21G6K-1@4A- D3V-166K-1@5- D3V-116K-1@5- D3V-116K-1@4- D3V-66K-1@4- D3V-6G6K-1@3- D3V-016K-1@3- 39.80.8 14.3 8.5 PT 5.1 t=0.5 0.7 2.8 4 10.30.1 15.9 7.2 18.8 OP +0.13 t=0.5 Three, #187 series tab 2.8 (10) 3.40.15 dia. hole 22.20.1 27.8 37.80.8 D3V-21G6K-1@4A-D D3V-166K-1@5-D D3V-116K-1@5-D D3V-116K-1@4-D D3V-66K-1@4-D OF max. RF min. 50 gf 3 gf 75 gf 10 gf 40 gf 3 gf PT max. OT min. MD max. 7.2 mm 2.0 mm 2.0 mm Model 7.2 mm 2.0 mm 2.7 mm (F gap type) or 2.0 mm (G gap type) 20.7 2.2 mm OP 86 Miniature Basic Switch D3V 3.1-0.03 10.3 D3V-6G6K-1@3-D D3V-016K-1@3-D 20 gf --7.2 mm 2.0 mm 2.7 mm Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User's Guide, "Snap Action Switches, Technical Information" for correct use. Correct Use Cautions Mounting Direction Handling Mount lever-operated switches with a maximum operating force of 0.49 N in a direction where the actuator weight will not be applied to the switch. Since the switch is designed for a small load, its resetting force is small. Therefore, resetting failure may occur if unnecessary load is applied to the switch. Be careful not to drop the switch. Doing so may cause damage to the switch's internal components because it is designed for a small load. Insulation Distance According to EN61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.9 mm. If the insulation distance cannot be provided in the product incorporating the switch, either use a switch with insulation barrier or use a Separator to ensure sufficient insulation distance. Using Microloads Voltage (V) Using a model for ordinary loads to switch microloads may result in faulty operation. Instead, use the models that are designed for microloads and that operate in the following range; Operating range for micro load models D3V-01 Operating range for generalload models Inoperable range Current (mA) However, even when using microload models within the operating range shown above, if inrush current or inductive voltage spikes occur when the contact is opened or closed, then contact wear may increase and so decrease the service life. Therefore, insert a contact protection circuit where necessary. Solder Terminal Approval Conditions Use of soldering iron for normal soldering is acceptable. Soldering hook holes version available. Soldering terminal types 1 and 2 are met. Miniature Basic Switch D3V 87 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X303-E-1 11/10 Miniature Basic Switch Specifications subject to change without notice D3V Printed in USA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: D3V-16G2M1C25K D3V-11G2M1C25K D3V-11G4M1C25K D3V-16G4M1C25K D3V-11G21C25K D3V16G6M1C25K D3V-11G61C25K D3V-16G61C25K D3V-16G2-3C25-K D3V-21G-1C4A-K D3V-11-2A5 D3V-16G1C25 D3V-11-2C25 D3V-16-1C5 D3V-16G-1C5 D3V-16G-3C5 D3V-11-1A4 D3V-6-1C24 D3V-11G-1C4 D3V-011C23 D3V-11G-1C23 D3V-11G-1C3 D3V-01-1C22 D3V-01-3C22 D3V-16-1A5-K D3V-11-1A5-K D3V-16G-1A5-K D3V-11G-1A5-K D3V-11-2A5-K D3V-16G-2A5-K D3V-11G-2A5-K D3V-16G-3A5-K D3V-11G-3A5-K D3V-16-1C25K D3V-11G-2C25-K D3V-16G-3C25-K D3V-11G-3C25-K D3V-11G-1C5-K D3V-16G-2C5-K D3V-16G-3C5-K D3V16G-1C4A-K D3V-21G-2C4A-K D3V-21G-3C4A-K D3V-6-1A4-K D3V-01-1A4-K D3V-11G-1A4-K D3V-6G-1A4-K D3V-11G-2A4-K D3V-6G-2A4-K D3V-11G-3A4-K D3V-6G-3A4-K D3V-16-1C24-K D3V-11-1C24-K D3V-6-1C24-K D3V-16G-1C24-K D3V-6G-1C24-K D3V-11G-2C24-K D3V-6G-2C24-K D3V-11-3C24-K D3V-11G-3C24-K D3V-6G3C24-K D3V-11G-1C4-K D3V-6G-1C4-K D3V-11G-2C4-K D3V-6-3C4-K D3V-16G-3C4-K D3V-6G-3C4-K D3V-011A3-K D3V-01-1C23-K D3V-11G-1C23-K D3V-6G-1C23-K D3V-6G-2C23-K D3V-01-3C23-K D3V-6G-1C3-K D3V01G-2C3-K D3V-6G-3C3-K D3V-01-1C22-K D3V-16G-1C25-K-H D3V-16-1C5-K-H D3V-11G-1C24-K-H D3V-013C23-T D3V-112-1C24 D3V-114-1C4 D3V-11G1-1C24-K D3V-11G1-1C25-K D3V-11G1M-1A4-K D3V-11G1M-1A5K D3V-11G1M-1C24-K D3V-11G1M-1C25-K D3V-11G1M-2A4-K D3V-11G1M-2A5-K D3V-11G1M-2C24-K D3V11G1M-2C25-K D3V-11G1M-3A4-K D3V-11G1M-3A5-K D3V-11G1M-3C24-K D3V-11G1M-3C25-K D3V-11G2-1C5K D3V-11G2-3C25-K D3V-11G25-1C24-K