Composite Transistors XP02210 (XP2210) Silicon NPN epitaxial planer transistor Unit: mm 0.20.05 For switching/digital circuits 2.10.1 1 2 1.250.1 0.425 5 3 4 +0.05 0.9 0.1 UNR1210(UN1210) x 2 elements 0 to 0.1 0.70.1 Basic Part Number of Element 0.12 - 0.02 0.2 Two elements incorporated into one package. (Base-coupled transistors with built-in resistor) Reduction of the mounting area and assembly cost by one half. 2.00.1 0.65 Features 0.65 0.425 Absolute Maximum Ratings (Ta=25C) Parameter Symbol Ratings Unit Collector to base voltage Rating Collector to emitter voltage of element Collector current VCBO 50 V VCEO 50 V IC 100 mA Total power dissipation PT 150 mW Overall Junction temperature Tj 150 C Tstg -55 to +150 C Storage temperature 1 : Emitter (Tr1) 2 : Base 3 : Emitter (Tr2) 0.20.1 4 : Collector (Tr2) 5 : Collector (Tr1) EIAJ : SC-88A S-Mini Type Package (5-pin) Marking Symbol: 9Q Internal Connection 1 Tr1 5 2 3 Electrical Characteristics Parameter 4 (Ta=25C) Symbol Conditions min typ max Unit Collector to base voltage VCBO IC = 10A, IE = 0 50 V Collector to emitter voltage VCEO IC = 2mA, IB = 0 50 V ICBO VCB = 50V, IE = 0 0.1 A ICEO VCE = 50V, IB = 0 0.5 A Emitter cutoff current IEBO VEB = 6V, IC = 0 0.01 mA Forward current transfer ratio hFE VCE = 10V, IC = 5mA 160 Forward current transfer hFE ratio hFE (small/large)*1 VCE = 10V, IC = 5mA 0.5 Collector to emitter saturation voltage VCE(sat) IC = 10mA, IB = 0.3mA Output voltage high level VOH VCC = 5V, VB = 0.5V, RL = 1k Output voltage low level VOL VCC = 5V, VB = 2.5V, RL = 1k Transition frequency fT VCB = 10V, IE = -2mA, f = 200MHz Input resistance R1 Collector cutoff current *1 Tr2 460 0.99 0.25 4.9 V 0.2 150 -30% V 47 V MHz +30% k Ratio between 2 elements Note.) The Part number in the Parenthesis shows conventional part number. 1 Composite Transistors XP02210 PT -- Ta Total power dissipation PT (mW) 250 200 150 100 50 0 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (C) IC -- VCE VCE(sat) -- IC 100 Ta=25C Collector current IC (mA) 50 40 30 0.4mA 0.5mA 0.6mA 0.7mA 0.3mA 0.1mA 20 10 0 0 2 4 6 8 10 12 IC/IB=10 30 10 3 1 Ta=75C 0.3 25C 0.1 0.03 -25C 0.01 0.1 0.3 Collector to emitter voltage VCE (V) 3 10 10000 Ta=75C 250 25C 200 -25C 150 100 50 30 100 1 (mA) 3 3 2 10 30 100 300 1000 Collector current IC (mA) VIN -- IO 100 VO=5V Ta=25C 3000 30 1000 10 Input voltage VIN (V) Output current IO (A) Collector output capacitance Cob (pF) 300 IO -- VIN 4 300 100 30 10 VO=0.2V Ta=25C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 Collector to base voltage 2 1 Collector current IC f=1MHz IE=0 Ta=25C 5 VCE=10V 350 0 Cob -- VCB 6 hFE -- IC 400 Forward current transfer ratio hFE IB=1.0mA 0.9mA 0.8mA Collector to emitter saturation voltage VCE(sat) (V) 60 30 100 VCB (V) 1 0.4 0.03 0.6 0.8 1.0 1.2 Input voltage VIN (V) 1.4 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) 100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR