10GB ETHERNET SFP+
ULTRA LOW POWER SR OPTICAL
TRANSCEIVER
OVERVIEW
FCI’s TRX10GVP2010C2 10Gb/s Ethernet 850nm Multi Mode
SFP+ SR Optical Transceiver is designed for datacenter
networking links up to 400m and uses half the power of
competitive options.
The TRX10GVP2010C2 is compliant with SFP+ MSA specifications
(SFF-8431, SFF-8432, SFF-8472), 10 Gigabit Ethernet
specifications (10GBASE-SR/SW), and also 10G Fibre Channel
(1200-MX-SN-I). It is RoHS 6/6 compliant per Directive
2002/95/EC and laser class 1 safety compliant per IEC/CDRH.
The TRX10GVP2010C2 is the most power efficient way to
transmit optical 10Gb Ethernet traffic in the datacenter.
OPTICAL INTERCONNECT
FEATURES BENEFITS
• Ultra Low Power Consumption at 0.25W Typical • Lowers energy cost
• Simplifies thermal management
• Supports Commercial Temperature Range • Operates over temperature range of 0°C to +70°C (case)
• Ethernet 10GBASE-SR/SW Compliance • Ethernet Transmission distance up to 400m
(multi mode fibre)
• Interoperable with other 10GBASE-SR/SW compatible
transceivers
• Fibre Channel 1200-MX-SN-I Compliance • Fibre Channel Transmission distance up to 400m
(multi mode fibre)
• SFF-8431 SFP+ Electrical MSA Compliance • Electrically interoperable with all SFP+ ports
• SFF-8436 SFP+ Mechanical MSA Compliance • Mechanically interoperable with all SFP+ ports
• Supports duplex LC optical connectors
• SFF-8472 SFP+ Diagnostic Interface MSA Compliance • Allows for connection discovery and signal condition
monitoring
• Data rate transparent from 9.95Gb/s to 11.3Gb/s • Supports Non-standard protocols in this range of data
rates
• Laser Class 1 IEC / CDRH compliant • Eye-safe laser source
• ROHS 6/6 Compliance • Does not contain hazardous materials
For more information,
please contact: Communications@fci.com
or visit us at www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
TECHNICAL INFORMATION
MATERIALS
• Mates with:
• Board Connector: FCI/PN 10122424 series
• Cage:
• 1x4 cage configuration- FCI P/N10122382,
10126907 & 10126908 series
• 1x2 cage configuration- FCI P/N 10127103
& 10127105 series
• 1x4 cage configuration- FCI P/N 10122388,
10126909 & 10126910 series
• LC Interface: FCI/P/N 10120511-series
ELECTRICAL PERFORMANCES
• Power Supply Voltage: 3.3V
• Data Rate per Lane: 10Gbps
• Power Consumption: 0.25W (typ.)
• Transmitter Type: 850mm VCSEL laser
• Receiver Type: PIN-diode
ENVIRONMENTAL
• RoHS 6/6 compliant
• Laser Class 1 / CDRH
• Operating Temperature Range: 0°C to 70°C
SPECIFICATIONS
• Module meets MSA -Small Form Factors
• SFF-8431 / Electrical
• SFF-8432 / Mechanical
• SFF-8472 / Diagnostic
• Product Specification: GS-12-1278
APPROVALS AND CERTIFICATIONS
• UL: E251142-191
• TUV: 213137-019
• FDA: 0312716
PACKAGING
• Individual Blister Package
SUPPORTED STANDARDS
• 10GBASE-SR per IEEE 802.3
• 10GBASE-SW per IEEE 802.3
TARGET MARKETS/APPLICATIONS
• Communications
• Switches
• Data
• Data Center
• High Performance Computing
• Industrial
OPISFP+SRCOB0115EA4
10GB ETHERNET SFP+
ULTRA LOW POWER SR OPTICAL TRANSCEIVER
Application Standard Part Number
10G Ethernet LAN IEEE 802.3ae 10GBASE-SR TRX10GVP2010C2
10G Ethernet WAN IEEE 802.3ae 10GBASE-SW TRX10GVP2010C2
10G Fibre Channel Fibre Channel 1200-MX-SN-I TRX10GVP2010C2
PART NUMBERS
Made in China
TRX10GVP2010C2
ENXXXX-YYYYY
10GB ETHERNET SFP+
LRM OPTICAL TRANSCEIVER
OVERVIEW
FCI’s TRX10GDL0610C3 10Gb/s Ethernet 1310nm Multi Mode
SFP+ LRM Optical Transceiver is designed for 10Gb Ethernet
using legacy fiber. Links up to 220m can be made over FDDI-
quality fiber links and over OM1/2/3/4 multimode fiber.
The TRX10GDL0610C3 is compliant with SFP+ MSA
specifications (SFF-8431, SFF-8432, SFF-8472), and 10 Gigabit
Ethernet specifications (10GBASE-LRM). It is RoHS 6/6
compliant per Directive 2002/95/EC and laser class 1 safety
compliant per IEC/CDRH.
The TRX10GDL0610C3 improves cost efficiency of 10GbE
upgrades by re-using existing structured fiber cable.
OPTICAL INTERCONNECT
FEATURES
• Supports Commercial Temperature Range
• Ethernet 10GBASE-LRM Compliance
• SFF-8431 SFP+ Electrical MSA Compliance
• SFF-8436 SFP+ Mechanical MSA Compliance
• SFF-8472 SFP+ Diagnostic Interface MSA Compliance
• Data rate transparent from 9.95Gb/s to 11.3Gb/s
• Low Power Consumption
• Laser Class 1 IEC / CDRH compliant
• RoHS 6/6 Compliance
BENEFITS
• Operates over temperature range of 0°C to +70°C (case)
• Transmission distance up to 220m (multi mode fiber,
including FDDI-grade)
• Interoperable with other 10GBASE-LRM compatible
transceivers
• Electrically interoperable with all SFP+ ports
• Mechanically interoperable with all SFP+ ports
• Supports duplex LC optical connectors
• Allows for connection discovery and signal condition
monitoring
• Supports Non-standard protocols in this range of data rates
• Only 0.8W (Typ.) power consumption
• Eye-safe laser source
• Does not contain hazardous materials
140709-10GB ETHERNET SFP+ LRM OPTICAL TRANSCEIVER.indd 1 2014-7-9 17:10:26
Application Standard Part Number
10G Ethernet IEEE 802.3 10GBASE-LRM TRX10GDL0610C3
10GB ETHERNET SFP+ LRM OPTICAL TRANSCEIVER
TECHNICAL INFORMATION
SPECIFICATIONS
• Module meets MSA –Small Form Factors
• SFF-8431 / Electrical
• SFF-8432 / Mechanical
• SFF-8472 / Diagnostic
• Product Specification: GS-12-0984
APPROVAL AND CERTIFICATIONS
• UL : E251142-191
• TUV : 2113137-019
• FDA : 0312716
PACKAGING
• Individual Blister Package
SUPPORTED STANDARDS
• 10GBASE-LRM per IEEE 802.3
TARGET MARKET/ APPLICATIONS
• Communications
• Switches
• Data
• Data Center
• High Performance Computing
• Industrial
PART NUMBERS
For more information,
please contact: Communications@fci.com
or visit us at www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
OPISFP+LRM0714EA4
MATERIALS
• Mates with:
• Board Connector: FCI P/N 10122424 series
• Cage:
• 1x1 cage configuration- FCI P/N 10122382,
10126907 & 10126908 series
• 1x2 cage configuration- FCI P/N 10127103 &
10127105 series
• 1x4 cage configuration- FCI P/N 10122388,
10126909 & 10126910 series
• LC interface: FCI P/N 10120511-series
ELECTRICAL PERFORMANCE
• Power Supply Voltage: 3.3V
• Data Rate per Lane: 10Gbps
• Power Consumption: 0.55W (typ.)
• Transmitter Type: 850 nm VCSEL laser
• Receiver Type: PIN-diode
ENVIRONMENTAL
• RoHS 6/6 compliant
• Laser Class 1 / CDRH
• Operating Temperature Range: 0°C to 70°C
13.70
47.50
13.90
Laser Class1 21 CFR 1040.10 & 1040.11
EM1041-00001 MS
Made in China
TRX10GDL0610C3
140709-10GB ETHERNET SFP+ LRM OPTICAL TRANSCEIVER.indd 2 2014-7-9 17:10:26
10GB ETHERNET SFP+
LR OPTICAL TRANSCEIVER
OVERVIEW
FCI’s TRX10GDP0310C1 10Gb/s Ethernet 1310nm Single Mode
SFP+ LR Optical Transceiver is designed for 10km datacenter
networking links.
The TRX10GDP0310C1 is compliant with SFP+ MSA
specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit
Ethernet specifications (10GBASE-LR/LW), and also 10G
Fibre Channel (1200-SM-LL-L). It is RoHS 6/6 compliant per
Directive 2002/95/EC and laser class 1 safety compliant per
IEC/CDRH.
Today’s datacenters are larger than ever and the 10km reach
of the TRX10GDP0310C1 is more than sufficient to make these
connections.
OPTICAL INTERCONNECT
FEATURES
• Supports Commercial Temperature Range
• Ethernet 10GBASE-LR/LW Compliance
• Fibre Channel 1200-SM-LL-L Compliance
• SFF-8431 SFP+ Electrical MSA Compliance
• SFF-8436 SFP+ Mechanical MSA Compliance
• SFF-8472 SFP+ Diagnostic Interface MSA Compliance
• Data rate transparent from 9.95Gb/s to 11.3Gb/s
• Low Power Consumption
BENEFITS
• Operates over temperature range of 0°C to +70°C (case)
• Ethernet Transmission distance up to 10km (single mode
fiber)
• Interoperable with other 10GBASE-LR/LW compatible
transceivers
• Fibre Channel Transmission distance up to 10km (single
mode fiber)
• Electrically interoperable with all SFP+ ports
• Mechanically interoperable with all SFP+ ports
• Supports duplex LC optical connectors
• Allows for connection discovery and signal condition
monitoring
• Supports Non-standard protocols in this range of data rates
• Only 0.75W (Typ.) power consumption
140709-10GB ETHERNET SFP+ LR OPTICAL TRANSCEIVER.indd 1 2014-7-9 17:12:27
Application Standard Part Number
10G Ethernet LAN/WAN IEEE 802.3 10GBASE - LR/LM TRX10GDP0310C1
10GB ETHERNET SFP+ LR OPTICAL TRANSCEIVER
TECHNICAL INFORMATION
SPECIFICATIONS
• Module meets MSA- Small Form Factor
• SFF-8431/ Electrical
• SFF-8432/ Mechanical
• SFF-8472/ Diagnostic
• Product Specification: GS-12-0974
APPROVALS AND CERTIFICATIONS
• TUV: 2113137-019
• UL: E251142-191
• FDA: 0312716
PACKAGING
• Individual Blister Package
TARGET MARKET/ APPLICATIONS
• Communications
• Switches
• Data
• Data Center
• High Performance Computing
• Industrial & Instrumentation
PART NUMBERS
For more information,
please contact: Communications@fci.com
or visit us at www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
OPISFP+LROT0714EA4
MATERIALS
• Mates with:
• Board Connector: 10122424-1012F
• Cage:
• 1x1 cage configuration- FCI P/N 10122382,
10126907 & 10126908 series
• 1x2 cage configuration- FCI P/N 10127103 &
10127105 series
• 1x4 cage configuration- FCI P/N 10122388,
10126909 & 10126910 series
• LC interface: FCI P/N 10120511-series
ELECTRICAL PERFORMANCE
• Power Supply Voltage: 3.3V
• Data Rate per Lane: 10 Gbps
• Power Consumption: 0.75 (typ.)
• Transmitter Type: 1310 nm DFB laser
• Receiver Type: PIN-diode
ENVIRONMENTAL
• RoHS 6/6 Compliant
• Laser Class 1/ CDHR
• Operating Temperature Range: 0°C to 70°C
13.70
47.50
13.90
Laser Class1 21 CFR 1040.10 & 1040.11
EM1041-00001 MS
Made in China
TRX10GDP0310C1
140709-10GB ETHERNET SFP+ LR OPTICAL TRANSCEIVER.indd 2 2014-7-9 17:12:27
10GB ETHERNET SFP+
INDUSTRIAL TEMPERATURE
LR OPTICAL TRANSCEIVER
OVERVIEW
FCI’s TRX10GDP0311A1 10Gb/s Single Mode Telecom SFP+ LR
Optical Transceiver is designed for 10km outdoor networking
links and other applications requiring an Industrial grade
operational temperature range.
The TRX10GDP0311A1 is compliant with SFP+ MSA
specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit
Ethernet specifications (10GBASE-LR/LW), and also 10G
Fibre Channel (1200-SM-LL-L). It is RoHS 6/6 compliant per
Directive 2002/95/EC and laser class 1 safety compliant per
IEC/CDRH.
The wide operating temperature range of -40°C to +85°C
allows the TRX10GDP0311A1 to operate in the most demanding
environments.
OPTICAL INTERCONNECT
FEATURES
• Supports Industrial Temperature Range
• Ethernet 10GBASE-LR/LW Compliance
• Fibre Channel 1200-SM-LL-L Compliance
• SFF-8431 SFP+ Electrical MSA Compliance
• SFF-8436 SFP+ Mechanical MSA Compliance
• SFF-8472 SFP+ Diagnostic Interface MSA Compliance
• Data rate transparent from 9.95Gb/s to 11.3Gb/s
• Low Power Consumption
• Laser Class 1 IEC / CDRH compliant
• RoHS 6/6 Compliance
BENEFITS
• Operates over an extended temperature range of -40°C to
+85°C (case)
• Ethernet Transmission distance up to 10km (single mode
fiber)
• Interoperable with other 10GBASE-LR/LW compatible
transceivers
• Fibre Channel Transmission distance up to 10km (single
mode fiber)
• Electrically interoperable with all SFP+ ports
• Mechanically interoperable with all SFP+ ports
• Supports duplex LC optical connectors
• Allows for connection discovery and signal condition
monitoring
• Supports Non-standard protocols in this range of data rates
• 0.8W (Typ.) power consumption
• Eye-safe laser source
• Does not contain hazardous materials
140719-10GB ETHERNET INDUSTRIAL TEMPERATURE SFP+ LR OPTICAL TRANSCEIVER.indd 1 2014-7-9 17:13:03
13.70
47.50
13.90
Class1 Laser 21 CFR 1040.10 & 1040.11
MECHANICAL SAMPLE
Made in China. Nan Tong,1403
TRX10GDP0311A1
MATERIALS
• Mates with:
• Board Connector: FCI P/N 10122424 series
• Cage:
• 1x1 cage configuration- FCI P/N 10122382,
10126907 & 10126908 series
• 1x2 cage configuration- FCI P/N 10127103 &
10127105 series
• 1x4 cage configuration- FCI P/N 10122388,
10126909 & 10126910 series
• LC interface: FCI P/N 10120511-series
ELECTRICAL PERFORMANCE
• Power Supply Voltage: 3.3V
• Data Rate per Lane: 10Gbps
• Power Consumption: 0.80W (typ.)
• Transmitter Type: 1310 nm DFB laser
• Receiver Type: PIN-diode
ENVIRONMENTAL
• RoHS 6/6 compliant
• Laser Class 1 / CDHR
• Operating Temperature Range: -40°C to +85°C
• Temperature Life - EIA 364-17, Method A, Condition 3,
Time Condition C, 500 hours, 85°C
• Mixed Flowing Gas - EIA 364-65, Class IIA - 10 days
unmated and 10 days mated (EIA-364-21)
Application Standard Part Number
10G Ethernet LAN/WAN IEEE 802.3 10GBASE-LR/LW TRX10GDP0311A1
10G Fibre Channel 1200-SM-LL-L TRX10GDP0311A1
10GB ETHERNET SFP+ INDUSTRIAL TEMPERATURE
LR OPTICAL TRANSCEIVER
TECHNICAL INFORMATION
SPECIFICATIONS
• Module meets MSA –Small Form Factors
• SFF-8431 / Electrical
• SFF-8432 / Mechanical
• SFF-8472 / Diagnostic
• Product Specification: GS-12-1108
APPROVALS AND CERTIFICATIONS
• TUV : EN60950-1:2001
• FDA : CDRH 21 CFR 1040.10 and 1040.11
PACKAGING
• Individual Blister Package
SUPPORTED STANDARDS
• 10GBASE-LR per IEEE 802.3
• 10GBASE-LW per IEEE 802.3
• 10GFC per 1200-SM-LL-L
TARGET MARKET/ APPLICATIONS
• Communications
• Wireless Infrastructure
• Switches
• Data
• Data Center
• High Performance Computing
• Industrial
• Uncontrolled temperature environments
PART NUMBERS
For more information,
please contact: Communications@fci.com
or visit us at www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
OPISFP+13100714EA4
140719-10GB ETHERNET INDUSTRIAL TEMPERATURE SFP+ LR OPTICAL TRANSCEIVER.indd 2 2014-7-9 17:13:03
