DC-DC CONVERTERS C Class Non-isolated 1
2 YEAR WARRANTY
SIL06C Series
5 Vin and 12 Vin single output
•6 A current rating
•Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc
•Output voltage range: 0.9 Vdc to 5.0 Vdc
•Industry leading value
•Cost optimised design
•Excellent transient response
•Output Voltage adjustability
•Pathway for future upgrades
•Supports silicon voltage migration
•Resulting in reduced design-in and qualification time
•Designed in reliability: MTBF of >7 million hrs
per Telcordia SR-332
•Available RoHS compliant
The SIL06C series is a new high density open frame non-isolated converter for space
sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc
to 13.8 Vdc) and offer a wide 0.9 Vdc to 5 Vdc output voltage range with a 6 A load. An
external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to
the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and
91% for the 12 V input version. The SIL06C series offers remote ON/OFF and overcurrent
protection as standard. With full international safety approval including EN60950 and
UL/cUL60950, the SIL06C reduces compliance costs and time to market.
NEW Product
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability 5 V input models 0.9-3.3 Vdc
(See Note 7) 12 V input models 0.9-5.0 Vdc
Output setpoint accuracy With 1.0% trim resistors ±2.5%
Line regulation Low line to high line ±0.2% max.
Load regulation Full load to min. load ±0.5% max.
Min./max. load 0 A/6 A
Overshoot 5 V input models 3.0% max.
(at turn on) 12 V input models 1.0% max.
Undershoot 100 mV max.
Ripple and noise 5 Hz to 20 MHz (See Note 2) See table
Transient response Deviation 75 mV
(See Note 1) 150 µs recovery to
within regulation band
INPUT SPECIFICATIONS
Input voltage range 5 V input model 4.5-5.5 Vdc
12 V input model 10.2-13.8 Vdc
Input current No load 50 mA
Remote OFF 5 mA
Input current (max.) 5 V input model 5.1 A @ Io max.
(See Note 9) 12 V input model 1.6 A @ Io max.
Input reflected ripple 5 V input model 52 mA (pk-pk)
(See Note 2) 12 V input model 56 mA (pk-pk)
Remote ON/OFF
Logic compatibility Active high
ON >2.4 Vdc
OFF <0.8 Vdc
Start-up time Power up <20 ms
(See Note 3) Remote ON/OFF <20 ms
File Name: sil06c.pdf Rev (02): 16 Dec 2005
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421
UL60950 File No. E139421
TÜV Product Service (EN60950) Certificate No. B 04 08 19870 228
CB report and certificate to IEC60950
INPUT SPECIFICATIONS (CONTD.)
Turn ON threshold 5 Vin 4.5 Vdc
12 Vin 9.0 Vdc
Turn OFF threshold 5 Vin 4.3 Vdc
12 Vin 7.5 Vdc
GENERAL SPECIFICATIONS
Efficiency See Table
Switching frequency Fixed 200 kHz
Approvals and (See Note 4) TÜV Product Services
standards IEC60950, UL/cUL60950
Material flammability UL94V-0
Weight 9.3 g (0.3 oz)
MTBF Telcordia SR-332 7,562,142 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, 0 ºC to +80 ºC
(See Note 8) temperature
Non-operating -40 ºC to +125 ºC
PROTECTION
Short-circuit protection Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance (See Note 11) 270 µF/20 mΩesr max.
Output capacitance (See Note 11) 680 µF/10 mΩesr max.
NNootteess
1di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
2Measured with external filter. See Application Note 131 for details.
3Power up is the time from application of dc input to Power Good
enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good
enabled
4This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5The standard unit with the suffix '-V' is for vertical mounting. To order a
unit with horizontal mounting, please add the suffix '-H' to the model
number, e.g. SIL06C-05SADJ-HJ.
6Measured as per recommended set-up. Cin = 270 µF (20 mΩesr max.).
Cout = 680 µF (10 mΩesr max.).
7Uses external resistor from trim to output ground. Minimum value 485 Ω
for 5 V model, 280 Ωfor 12 V model. See Applications Note 131 for
details.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL06C Series
5 Vin and 12 Vin single output
DC-DC CONVERTERS C Class Non-isolated 2
NEW Product
OUTPUT
INPUT OVP OUTPUT
OUTPUT OUTPUT
EFFICIENCY REGULATION MODEL
POWER
VOLTAGE VOLTAGE(12) CURRENT CURRENT
(TYP.) LINE LOAD
NUMBER (5,13,14,15)
(MAX.) (MIN.) (MAX.)
20 W 4.5-5.5 Vdc N/A 0.9-3.3 Vdc 0 A 6 A 89% ±0.2% ±0.5%
SIL06C-05SADJ-VJ
30 W 10.2-13.8 Vdc N/A 0.9-5.0 Vdc 0 A 6 A 91% ±0.2% ±0.5%
SIL06C-12SADJ-VJ
RRiippppllee aanndd NNooiissee SSppeecciiffiiccaattiioonn
Output
Model Voltage Pk - Pk RMS
5 V input models 0.9-2.5 Vdc 30 mV 15 mV
3.3 Vdc 40 mV 15 mV
12 V input models 0.9-2.5 Vdc 40 mV 20 mV
3.3-5 dcV 50 mV 20 mV
File Name: sil06c.pdf Rev (02): 16 Dec 2005
SIL06C-12SADJ-VJ
Part Number System with Options
Rated Output Current
06 = 6 Amps
Number of Outputs
SADJ = Single Adjustable Output
Product Family
SIL = Single in Line
Performance
C = Cost Optimised
Input Voltage
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V
OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee SSIILL0066CC SSeerriieess
Mounting Option
V = Vertical Mount
H = Horizontal Mount
Packaging Options (14)
J = Pb-free (RoHS 6/6 compliant)
NNootteess ccoonnddtt..
8Signal line assumed <3 m.
9External input fusing recommended.
10 See Application Note 131 for operation above 50 ºC.
11 See Application Note 131 for more details.
12 These models have a wide trim output. 5 Vin has an output of 0.9 Vdc to
3.3 Vdc and 12 Vin has an output of 0.9 Vdc to 5 Vdc. An external
resistor adjusts the output voltage.
13 To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to the
model number, e.g. SIL06C-05SADJ-HP4J.
14 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
15 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL06C Series
5 Vin and 12 Vin single output
DC-DC CONVERTERS C Class Non-isolated 3
NEW Product
Figure 1: Mechanical Drawing - Horizontal Mount Version
Figure 2: Mechanical Drawing - Vertical Mount Version
All dimensions in inches (mm)
General tolerance ±0.01in (±0.25mm)
except where specified otherwise
Pin 1
0.050
(1.27)
1.200
(30.48)
0.040
(1.02) Ref.
0.610
(15.49)
Pin 8
0.100
(2.54)
5X
0.950
(24.13)
0.150
(3.81)
0.025 ±0.001
(0.64) Typ. ±0.025
0.070
(1.78)
0.315
(8.00) max.
0.150
(3.81)
8 Places
0.062
(1.57) Ref.
0.050
(1.27) Typ.
0.025 ±0.001
(0.64) Typ. ±0.025
Datasheet © Artesyn Technologies
®
2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com
File Name: sil06c.pdf Rev (02): 16 Dec 2005
PIN CONNECTIONS
PIN NUMBER FUNCTION
1 Vout
2 Trim
3 Ground
4 Power Good
5 Remote ON/OFF
6Vin
7 Mechanical support
8 Mechanical support
9 Mechanical support on
horizontal version only
All dimensions in INCHES (mm)
General tolerance ±0.01in (±0.25mm)
except where specified otherwise
0.315
(8.00) max
0.150
(3.81) Ref
0.120
(3.05)
9 Places
0.062
(1.57) PCB Ref
Pin 8
0.025 ±0.001
(0.64) Typ. ±0.025
0.950
(24.13)
0.100
(2.54)
5X
0.150
(3.80)
0.015
(0.38)
Pin 1
1.200
(30.48)
0.610
(15.49)
0.040
(1.02)
0.050
(1.27)
0.530
(15.01)
0.527
(13.38)
0.025 ±0.001
(0.64) Typ. ±0.025
Mechanical
Support Pin
