CONTACTS
Arrangement DPDT (2 Form C)
Ratings Resistive load:
Max. switched power: 300 W or 2770 VA
Max. switched current: 10 A, 51 A for 2 ms
Max. switched voltage:150* VDC or 400 VAC
UL Rating:10 A at 30 VDC or 277 VAC
1/8HP 120 VAC motor load
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Material Silver cadmium oxide
Resistance < 30 milliohms initially
(at rated current, voltage drop method)
COIL
Power
At Pickup Voltage Standard coil: 337 mW
(typical) Sensitive coil: 250 mW
Max. Continuous 1.9 W at 20°C (68°F) ambient
Dissipation 1.4 W at 40°C (104°F) ambient
Temperature Rise Standard: 40°C (72°F) at nominal coil
voltage
Sensitive: 32°C (58°F) at nominal coil
voltage
Temperature Max. 110°C (230°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
AZ732
7/26/02W
MINIATURE
POWER RELAY
FEATURES
•Dielectric strength 4000 Vrms coil to contact
•Isolation spacing greater than 8 mm
•Approvals/Standards include: UL, VDE, IEC, SEMKO,
CEE
•Double pole — Forms A, B, C, available
•10 Amp switching
•SLIMPAK™ version saves board space
•Epoxy sealed version for automatic wave soldering and
cleaning
•UL, CUR file E44211; VDE 4120–4940–4002/A1
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 30 million
Electrical 1 x 105at 10 A 30 VDC
1 x 105at 10 A 115 VAC
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 4000 Vrms contacts to coil
(at sea level for 1 min.) 2500 Vrms contact to contact
1000 Vrms between open contacts
Insulation 10,000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating Standard: -55°C (-67°F) to 70°C (158°F)
Sensitive: -55°C (-67°F) to 80°C (176°F)
Storage Both: -55°C (-67°F) to 110°C (230°F)
Vibration 0.062" DA at 10–55 Hz
Shock 20 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 20 grams