43
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
L01 Series
Description
Main Features
Features
New 1 Amp bi-directional solid state switch series offering
direct interface to microprocessor drivers in economical
TO-92 and surface mount packages. The die voltage
blocking junctions are glass-passivated to ensure long term
reliability and parametric stability.
Symbol Value Unit
IT(RMS) 1 A
VDRM/VRRM 400 to 800 V
IGT 3 to 10 mA
Absolute Maximum Ratings
Symbol Parameter Value Unit
IT(RMS)
RMS on-state current
(full sine wave)
TO-92 TC = 50°C
1.0A A
SOT-223 TL = 90°C
ITSM
Non repetitive surge peak on-state current
(Single cycle, TJ initial = 25°C)
TO-92
SOT-223
F = 50 Hz 10
A
F = 60 Hz 12
I2t I2t Value for fusing
tp = 10 ms F = 50 Hz 0.50
A2s
tp = 8.3 ms F = 60 Hz 0.59
di/dt Critical rate of rise of on-state current IG = 2 x IGT
TO-92
SOT-223 TJ = 125°C 20 A/μs
IGTM Peak gate current tp = 10 μs TJ = 125°C 1 A
PG(AV) Average gate power dissipation TJ = 125°C 0.1 W
Tstg Storage junction temperature range -40 to 150 °C
TJOperating junction temperature range -40 to 125 °C
Schematic Symbol
MT1
G
MT2
Applications
The L01 EV Series is especially designed for white goods
applications such as valve controls in washing machines as
well as replacement of mechanical and hybrid relays where
long life is required.
• RoHS compliant and
Halogen-Free
• Blocking voltage (VDRM)
capability — up to 800V
• Surge capability >
10Amps
• Static dv/dt > 20 Volts/
μsec
• Thru hole and surface
mount packages
HF
44
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Static Characteristics (TJ = 25°C, unless otherwise specified)
Symbol Description Test
Conditions Quadrant Limit Value Unit
L0103xy L0107xy L0109xy
IGT DC Gate Trigger Current VD = 12V
RL = 60 Ω
I – II – III
IV MAX. 3
5
5
7
10
10 mA
VGT DC Gate Trigger Voltage ALL MAX. — 1. 3 — V
IHHolding Current Gate Open MAX. 7 10 10 mA
dv/dt Critical Rate-of-Rise of
Off-State Voltage
TJ = 110°C
VD = VDRM
Exponential Waveform
Gate Open
MIN. 10 20 50 V/μs
(dv/dt)c
Critical
Rate-of-Rise of
Commutating Voltage
(di/dt)c = 0.54A/ms
TJ = 110°C MIN. 0.5 1. 0 2.0 V/μs
Tgt Turn-On Time
IG = 25mA
PW = 15μs
IT = 1.2A (pk)
MAX. 2.0 2.0 2.0 μs
Symbol Description Test Conditions Limit Value Unit
VTM Peak On-State Voltage ITM = 1.4A (pk) MAX 1.60 V
IDRM Off-State Current, Peak Repetitive
VD= VDRM TJ = 25°C
MAX
5 μA
VD= VDRM TJ = 125°C 500 μA
Thermal Resistances
Symbol Description Test Conditions Value Unit
Rth(j-c) Junction to case (AC) IT = 1.0A (RMS)
1
TO-92 50
°C/W
SOT-223 23
Rth(j-a) Junction to ambient IT = 1.0A (RMS)
1
TO-92 100
°C/W
SOT-223 55
1 60Hz AC resistive load condition, 100% conduction.
Note: x = voltage, y = package
45
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Figure 1: Definition of Quadrants
MT2 POSITIVE
(Positive Half Cycle)
MT2 NEGATIVE
(Negative Half Cycle)
MT1
MT2
+ I G
T
REF QII
MT1
IGT
GATE
MT2
REF
MT1
MT2
REF
MT1
MT2
REF
QI
QIV
QIII
ALL POLARITIES ARE REFERENCED TO MT1
(-)
IGT
GATE
(+)
IGT -
IGT
GATE
(-)
IGT
GATE
(+)
+
-
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Figure 2: Normalized DC Gate Trigger Current for
All Quadrants vs. Junction Temperature
Figure 4: Normalized DC Gate Trigger Voltage for
All Quadrants vs. Junction Temperature
Average On-state Power Dissipation
[PD(DAV)] - Watts
RMS On-state Current [IT(RMS)] - Amps
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0.0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.01. 1
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable Case Temperature
vs. On-State Current
Maximum Allowable Case Temperature (TC) - ºC
RMS On-state Current [IT(RMS)] - Amps
130
125
120
110
100
90
80
70
60
50
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.01. 11.2
SOT-223
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as
shown on dimensional drawings
TO-92
Ratio of IGT
IGT (TJ = 25°C)
Junction Temperature (TJ)- ºC
3.0
2.0
1.0
0.0
-40 -15 +25 +65 +105 +125
Ratio of IH
IH (TJ = 25°C)
Junction Temperature (TJ)- ºC
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -15 +5 +25 +45 +65 +85 +105 +125
-55
INITIAL ON-STATE CURRENT = 100mA (DC)
Ratio of VGT
VGT (TJ = 25°C)
Junction Temperature (TJ)- °C
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0.0
-55 -40 -15 +5 +25 +45 +65 +85 +105 +125
46
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak 5°C/second max
TS(max) to TL - Ramp-up Rate 5°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Figure 7: Surge Peak On-State Current vs. Number of Cycles
123456789102030406080100 200300 400600 1000
2
3
4
5
6
7
8
9
10
12
15
20
Surge Current Duration – Full Cycle
1
Peak Surge (Non-repetitive) On-State Current
(I
TSM
) – Amps.
1 A Devices
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State Current [IT(RMS)]: Max Rated Value at Specific
Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state rated value.
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
r
e
h
eat
Ramp-upRamp-up
Ramp-down
R
am
p
-
do
47
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Physical Specifications Environmental Specifications
Dimensions — TO-92 (E Package)
A
G
H
I
FE
J
D
F
C
B
T MEASURING POINT
C
SEATING
PLANE
GATE
MT2
MT1
Dimensions
Inches Millimeters
Min Max Min Max
A 0.175 0.205 4.450 5.200
B0.170 0.210 4.320 5.330
C 0.500 12.70
D 0.135 3.430
E 0.125 0.165 3.180 4.190
F 0.080 0.105 2.040 2.660
G 0.016 0.021 0.407 0.533
H 0.045 0.055 1.150 1.390
I 0.095 0.105 2.420 2.660
J 0.015 0.020 0.380 0.500
Test Specifications and Conditions
AC Blocking MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature/
Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage 1008 hours; -40°C
Thermal Shock
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat MIL-STD-750 Method 2031
Solderability ANSI/J-STD-002, category 3, Test A
Lead Bend MIL-STD-750, M-2036 Cond E
Terminal Finish 100% Matte Tin-plated.
Body Material UL recognized epoxy meeting flammability
classification 94V-0.
Lead Material Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
48
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Dimensions – SOT-223
Dimensions
Inches Millimeters
Min Typ Max Min Typ Max
A 0.248 0.256 0.264 6.30 6.50 6.70
B0.130 0.138 0.146 3.30 3.50 3.70
C — — 0.071 — — 1.80
D 0.001 — 0.004 0.02 — 0.10
E 0.114 0.118 0.124 2.90 3.00 3.15
F 0.024 0.027 0.034 0.60 0.70 0.85
G — 0.090 — — 2.30 —
H — 0.181 — — 4.60 —
I 0.264 0.276 0.287 6.70 7. 0 0 7.30
J 0.009 0.010 0.014 0.24 0.26 0.35
K10° MAX
MT2
MT2
MT1
Gate
MT2
MT2
MT1
Gate
Dimensions in Millimeters (Inches)
Recommended Soldering Footprint
for SOT223
1.5
(0.059”)
1.5
(0.059”)
3.3
(0.130”)
6.4
(0.252”)
4.6
(0.181”)
1.2
(0.047”) 2.3
(0.091”)
(3x)
Pad Layout for SOT-223
MT2
MT2
MT1
Gate
Product Selector
Part Number Voltage Gate Sensitivity Quadrants Package
I II III IV
L0103DE 400 V 3 mA 5 mA TO-92
L0103ME 600 V 3 mA 5 mA TO-92
L0103NE 800 V 3 mA 5 mA TO-92
L0103DT 400 V 3 mA 5 mA SOT-223
L0103MT 600 V 3 mA 5 mA SOT-223
L0103NT 800 V 3 mA 5 mA SOT-223
L0107DE 400 V 5 mA 7 mA TO-92
L0107ME 600 V 5 mA 7 mA TO-92
L0107NE 800 V 5 mA 7 mA TO-92
L0107DT 400 V 5 mA 7 mA SOT-223
L0107MT 600 V 5 mA 7 mA SOT-233
L0107NT 800 V 5 mA 7 mA SOT-233
L0109DE 400 V 10 mA 10 mA TO-92
L0109ME 600 V 10 mA 10 mA TO-92
L0109NE 800 V 10 mA 10 mA TO-92
L0109DT 400 V 10 mA 10 mA SOT-223
L0109MT 600 V 10 mA 10 mA SOT-223
L0109NT 800 V 10 mA 10 mA SOT-223
MT2
MT2
MT1
Gate
49
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Packing Options
Part Number Marking Weight Packing Mode Base Quantity
L01xxyE L01xxyE 0.170 g Bulk 2500
L01xxyEAP L01xxyE 0.170 g Ammo Pack 2000
L01xxyERP L01xxyE 0.170 g Tape & Reel 2000
L01xxyTRP L01xxyT 0.120 g Tape & Reel 1000
Note: xx = gate sensitivity, y = voltage
TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications
Meets all EIA-468-C Standards
TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications
Meets all EIA-468-C Standards
0.708
(18.0)
1.6
(41.0)
0.5
(12.7) 0.1 (2.54)
0.2 (5.08)
0.236
(6.0)
0.02 (0.5)
Direction of Feed
Dimensions
are in inches
(and millimeters).
1.97
(50.0)
14.17(360.0)
Flat up
1.26
(32.0)
0.098 (2.5) MAX
MT1 MT2
Gate
0.354
(9.0)
0.157 DIA
(4.0)
Flat down
25 Devices per fold
MT1
MT2
Gate
Direction of Feed
Dimensions
are in inches
(and millimeters).
0.708
(18.0)
1.62
(41.2)
0.5
(12.7)
0.1 (2.54)
0.2 (5.08)
0.236
(6.0)
0.02 (0.5)
1.85
(47.0)
13.3
(338.0)
1.27
(32.2)
0.098 (2.5) MAX
12.2
(310.0)
1.85
(47.0)
0.354
(9.0)
0.157 DIA
(4.0)
50
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
TRIAC SERIES
01
CURRENT
01: 1A
xxL x
SENSITIVITY & TYPE
03: 3, 3, 3, 5mA Triac
07: 5, 5, 5, 7mA Triac
09: 10, 10, 10, 10mA Triac
VOLTAGE
D: 400V
M: 600V
N: 800V
xx xx
PACKAGE TYPE
E: TO-92
T: SOT-223
PACKING TYPE
Blank: Bulk Pack
RP : Reel Pack (TO-92)
:
Embossed Carrier Pack
(SOT-223)
AP : Ammo Pack (TO-92)
Part Numbering System Part Marking System
SOT223
TO92
Line1 = Littelfuse Part Number
Line2 = continuation…Littelfuse Part Number
Y = Last Digit of Calendar Year
M = Letter Month Code (A-L for Jan-Dec)
L = Location Code
DD = Calendar Date
4 mm 8 mm
∅1.5 mm
13 mm Abor
Hole Diameter
180 mm
13.4 mm
2 mm
12 mm
MT1 GATE
MT2
MT2
5.5 mm
1.75 mm
SOT-223 Reel Pack (RP) Specifications
