Pico Electronics: SERIES A/SM SURFACE MOUNT and PLUG-IN Page 1 of 3 SERIES A/SM SURFACE MOUNT and PLUG-IN Hi Reliability and Ultra-Miniature SERIES A: Low Profile 0.5" x 0.5" x 0.3" Height! ...up to 1.25 Watts SERIES SM: Low Profile 0.5" x 0.5" x 0.340" Height! ...up to 1.25 Watts ALSO: New Series AT/DT 0.200 height - up to 0.75 Watts. (See table of contents) This series of unregulated DC-DC converters are produced in an ultra-miniature encapsulated package. 178 different models are available. The units feature single and dual outputs. They will operate over the temperature range of -25 C to +70 C. No heat sink is required. FEATURES TYPICAL CHARACTERISTICS: Test conditions: 25 C ambient and input voltage at nominal value unless otherwise specified. LINE REGULATION: OUTPUT IS DIRECTLY PROPORTIONAL TO THE INPUT. Up to 1.25 watt output at 70 C ambient Encapsulated semiconductors, conservatively rated for maximum reliability Ultra-miniature size (0.3" Height) 5 input voltage ranges 5, 12, 24, 28 and 48V DC 100 megohm @ 500V DC isolation Input/output isolation Single and dual output No heat sink required Up to 250V Output Input voltage range: 5V models 4 to 6.5V DC 12V models 9 to 15V DC 24V models 17 to 28V DC 28V models 21 to 32V DC 48V models 25 to 50V DC Output Voltage Tolerance at Full Load: Options Available 5V models 0.25V 9V models 0.3V 12V & 15V models 0.4V 24V & 28V models 0.5V 48V models 0.7V 100V, 150V, 200V & 250V models 3.0V Per Mil Std. 883 Expanded operating temp (-55 C to +85 C) Stabilization Bake (125 C ambient) Temperature Cycle (-55 C to +125 C) Hi Temp, full power burn in (100% power, 125 C case temp) Converter frequency: 20 - 40 KHz Output temperature coefficient: 0.05%/C for 5V output 0.04%/C for 12V & 15V output 0.02%/C for 24, 28, 48, 100, 150, 200 and 250 volt outputs Operating temperature: -25 C to +70 C ambient. No heat sink is required. Storage temperature: -55 C to +125 C Isolation: 100 megohms min. @ 500V DC, for 3.3 to 48 VDC out 100 megohms min. @ 1000 VDC for 100 - 250 VDC out. SERIES A/SM - SINGLE OUTPUT PICO Plug-In Part Number PICO Surface Mount Part Number Input Volt. (V DC) Output Volt. (V DC) Max. Load Current (mA) Max. Output Power (watts) Eff. @ Full Load Typical (%) Input Current Full Load Typical (mA) Output Voltage Ripple @ Full Load* (Vp-p max) No Load Current Typical (mA) Full Load Output Voltage Tolerance (V DC) Price (US $) 5A3.3S 5A5S 5A5.2S 5A9S 5A12S 5A15S 5A24S 5A28S 5A48S 5A100S 5A150S 5A200S 5A250S 12A3.3S 12A5S 12A5.2S 12A9S 12A12S 12A15S 12A24S 12A28S 12A48S 12A100S 12A150S 12A200S 12A250S 15A3.3S 15A5S 15A5.2S 15A9S 15A12S 15A15S 15A24S 15A28S 15A48S 15A100S 15A150S 15A200S 15A250S 5SM3.3S 5SM5S 5SM5.2S 5SM9S 5SM12S 5SM15S 5SM24S 5SM28S 5SM48S 5SM100S 5SM150S 5SM200S 5SM250S 5 5 5 5 5 5 5 5 5 5 5 5 5 3.3 5 5.2 9 12 15 24 28 48 100 150 200 250 303 200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 60 66 66 73 73 75 75 74 77 78 76 75 75 333 303 303 342 342 333 333 338 325 321 329 333 333 0.20 0.20 0.20 0.15 0.15 0.12 0.10 0.10 0.10 0.90 0.90 0.90 0.90 80 65 65 80 80 90 90 90 90 ** ** ** ** 0.2 0.25 0.25 0.3 0.4 0.4 0.5 0.5 0.7 3.0 4.5 6.0 7.5 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 85.73 85.73 85.73 85.73 12SM3.3S 12SM5S 12SM5.2S 12SM9S 12SM12S 12SM15S 12SM24S 12SM28S 12SM48S 12SM100S 12SM150S 12SM200S 12SM250S 15SM3.3S 15SM5S 15SM5.2S 15SM9S 15SM12S 15SM15S 15SM24S 15SM28S 15SM48S 15SM100S 15SM150S 15SM200S 15SM250S 12 12 12 12 12 12 12 12 12 12 12 12 12 3.3 5 5.2 9 12 15 24 28 48 100 150 200 250 303 200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 60 66 66 74 76 78 78 77 80 80 79 78 75 139 126 126 141 137 134 134 135 130 130 132 134 139 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.20 0.90 0.90 0.90 0.90 26 24 24 26 26 26 26 26 26 ** ** ** ** 0.2 0.25 0.25 0.3 0.4 0.4 0.5 0.5 0.7 3.0 4.5 6.0 7.5 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 85.73 85.73 85.73 85.73 15 15 15 15 15 15 15 15 15 15 15 15 15 3.3 5 5.2 9 12 15 24 28 48 100 150 200 250 303 200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 60 66 66 74 76 78 78 77 80 80 79 78 75 111 101 101 113 110 107 107 108 104 104 105 107 111 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.20 0.90 0.90 0.90 0.90 22 20 20 20 20 20 20 20 20 ** ** ** ** 0.2 0.25 0.25 0.3 0.4 0.4 0.5 0.5 0.7 3.0 3.0 3.0 3.0 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 85.73 85.73 85.73 85.73 24A3.3S 24A5S 24A5.2S 24A9S 24A12S 24A15S 24A24S 24A28 24A48S 24SM3.3S 24SM5S 24SM5.2S 24SM9S 24SM12S 24SM15S 24SM24S 24SM28S 24 24 24 24 24 24 24 24 3.3 5 5.2 9 12 15 24 28 303 200 192 139 104 83 52 45 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 60 66 66 72 75 75 78 77 69 43 43 72 69 69 67 68 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 16 13 13 15 15 15 15 15 0.2 0.25 0.25 0.3 0.4 0.4 0.5 0.5 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 http://www.picoelectronics.com/dcdclow/pe62_63.htm?PartNo=5SM9S 3/25/2009 Pico Electronics: SERIES A/SM SURFACE MOUNT and PLUG-IN 24A100S 24A150S 24A200S 24A250S Page 2 of 3 24SM48S 24SM100S 24SM150S 24SM200S 24SM250S 24 48 26 1.25 78 67 0.25 24 100 12.5 1.25 76 69 0.90 24 150 8.3 1.25 73 71 0.90 24 200 6.25 1.25 73 71 0.90 24 250 5 1.25 70 74 0.90 28A3.3S 28 3.3 303 1.00 60 59 0.20 28SM3.3S 28A5S 28 5 200 1.00 66 54 0.20 28SM5S 28A5.2S 28 5.2 192 1.00 66 54 0.20 28SM5.2S 28A9S 28 9 139 1.25 72 62 0.20 28SM9S 28A12S 28 12 104 1.25 72 62 0.20 28SM12S 28A15S 28 15 83 1.25 73 61 0.20 28SM15S 28A24S 28 24 52 1.25 76 59 0.20 28SM24S 28A28S 28 28 45 1.25 76 59 0.20 28SM28S 28A48S 28 48 26 1.25 77 58 0.25 28SM48S 28A100S 28 100 12.5 1.25 75 60 0.90 28SM100S 28A150S 28 150 8.3 1.25 76 59 0.90 28SM150S 28A200S 28 200 6.25 1.25 75 60 0.90 28SM200S 28SM250S 28A250S 28 250 5 1.25 70 64 0.90 48A3.3S 48SM3.3S 48 3.3 303 1.00 60 35 0.20 48A5S 48SM5S 48 5 200 1.00 66 32 0.25 48A5.2S 48SM5.2S 48 5.2 192 1.00 66 32 0.25 48A9S 48SM9S 48 9 139 1.25 72 36 0.25 48A12S 48SM12S 48 12 104 1.25 73 36 0.25 48A15S 48SM15S 48 15 83 1.25 72 36 0.25 48A24S 48SM24S 48 24 52 1.25 76 34 0.25 48A28S 48SM28S 48 28 45 1.25 76 34 0.25 * For units with output voltages up to 48 volts, ripple is measured with 10F, 75 volt high quality tantalum capacitor which is required across the output. * For units with output voltage of 100-250 volts use a 0.1F, 500 volt capacitor which is required across output, and maintain at least 10% of rated load to prevent a voltage surge. ** Maintain minimum 10% of rated load to prevent a voltage surge SERIES A/SM - DUAL OUTPUT PICO Plug-In Part Number PICO Surface Mount Part Number Input Volt. (V DC) Output Volt. (V DC) Max. Load Current (mA) Max. Output Power (watts) Eff. @ Full Load Typical (%) Input Current Full Load Typical (mA) 5A5D 5SM5D 5 5 100 0.5 66 303 5A9D 5SM9D 5 9 69 0.625 73 342 5A12D 5SM12D 5 12 52 0.625 73 342 5A15D 5SM15D 5 15 42 0.625 75 333 5A24D 5SM24D 5 24 26 0.625 75 333 5A28D 5SM28D 5 28 22 0.625 74 338 5A48D 5SM48D 5 48 13 0.625 77 325 12A5D 12SM5D 12 5 100 0.5 66 126 12A9D 12SM9D 12 9 69 0.625 74 141 12A12D 12SM12D 12 12 52 0.625 76 137 12A15D 12SM15D 12 15 42 0.625 78 134 12A24D 12SM24D 12 24 26 0.625 78 134 12A28D 12SM28D 12 28 22 0.625 77 135 12A48D 12SM48D 12 48 13 0.625 80 130 15A5D 15SM5D 15 100 0.5 66 101 5 15A9D 15SM9D 15 69 0.625 74 113 9 15A12D 15SM12D 15 52 0.625 76 110 12 15A15D 15SM15D 15 42 0.625 78 107 15 15A24D 15SM24D 15 26 0.625 78 107 24 15A28D 15SM28D 15 22 0.625 77 108 28 48 15A48D 15SM48D 15 13 0.625 80 104 24A5D 24SM5D 24 5 100 0.5 66 63 24A9D 24SM9D 24 9 69 0.625 72 72 24A12D 24SM12D 24 12 52 0.625 75 69 24A15D 24SM15D 24 15 42 0.625 75 69 24A24D 24SM24D 24 24 26 0.625 78 67 24A28D 24SM28D 24 28 22 0.625 77 68 24A48D 24SM48D 24 48 13 0.625 78 67 28A5D 28SM5D 28 5 100 0.5 66 54 28A9D 28SM9D 28 9 69 0.625 72 62 28A12D 28SM12D 28 12 52 0.625 72 62 28A15D 28SM15D 28 15 42 0.625 73 61 28A24D 28SM24D 28 24 26 0.625 76 59 28A28D 28SM28D 28 28 22 0.625 76 59 28A48D 28SM48D 28 48 13 0.625 77 58 48A5D 48SM5D 48 5 100 0.5 66 32 48A9D 48SM9D 48 9 69 0.625 72 36 48A12D 48SM12D 48 12 52 0.625 73 36 48A15D 48SM15D 48 15 42 0.625 72 36 48A24D 48SM24D 48 24 26 0.625 76 34 48A28D 48SM28D 48 28 22 0.625 76 34 * For units with output voltages up to 48 volts, ripple is measured with 10F, 75 volt high quality tantalum capacitor which is required across each output. Ordering Instructions: No minimum. Net 30 days F.O.B. Pelham, New York Delivery--stock to one week for sample orders. Series A Single Output 48 VDC and below Series A/SM Single Output FOR OUTPUT VOLTAGES OF 48VDC and BELOW Typical Weight: 3.5 Grams HV Units .440" height http://www.picoelectronics.com/dcdclow/pe62_63.htm?PartNo=5SM9S Larger Size Schematic 16 ** ** ** ** 15 12 12 14 14 14 14 14 15 ** ** ** ** 5 6 6 8 8 8 9 9 0.7 3.0 4.5 6.0 7.5 0.2 0.25 0.25 0.3 0.4 0.4 0.5 0.5 0.7 3.0 4.5 6.0 7.5 0.2 0.25 0.25 0.3 0.4 0.4 0.5 0.5 Output Voltage Ripple @ Full Load* (Vp-p max) No Load Current Typical (mA) 0.20 0.15 0.15 0.12 0.10 0.10 0.10 0.20 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 65 80 80 90 90 90 90 24 26 26 26 26 26 26 20 20 20 20 20 20 20 13 15 15 15 15 15 16 12 14 14 14 14 14 15 6 8 8 8 9 9 Full Load Output Voltage Tolerance (V DC) 0.25 0.3 0.4 0.4 0.5 0.5 0.7 0.25 0.3 0.4 0.4 0.5 0.5 0.7 0.25 0.3 0.4 0.4 0.5 0.5 0.7 0.25 0.3 0.4 0.4 0.5 0.5 0.7 0.25 0.3 0.4 0.4 0.5 0.5 0.7 0.25 0.3 0.4 0.4 0.5 0.5 60.51 85.73 85.73 85.73 85.73 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 60.51 85.73 85.73 85.73 85.73 64.95 64.95 64.95 64.95 64.95 64.95 64.95 64.95 Price (US $) 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 68.41 73.43 73.43 73.43 73.43 73.43 73.43 Series SM Single Output 48 VDC and below HV Units .440" height 3/25/2009 Pico Electronics: SERIES A/SM SURFACE MOUNT and PLUG-IN Page 3 of 3 Larger Size Drawing Series A Single Output 100 VDC and above Larger Size Drawing Series A/SM Single Output +FOR OUTPUT VOLTAGES OF 100 VDC and ABOVE Typical Weight: 3.5 Grams Series SM Single Output 100 VDC and above Series A/SM Dual Output Series A Dual Output Typical Weight: 3.5 Grams Series SM Dual Output Larger Size Drawing Larger Size Schematic Larger Size Drawing Note: White Dot on top unit indicates + input. SINGLE & DUAL 12V - 5V SINGLE & DUAL 5V - 48V Larger Size Graph SINGLE & DUAL 5V - 5V Larger Size Graph SINGLE & DUAL 12V - 48V Larger Size Graph Larger Size Graph RECOMMENDED LAND PATTERN DIMENSIONS SERIES SM For immediate engineering assistance or to place an order: Call Toll Free: 800-431-1064 PICO Electronics, Inc. 143 Sparks Ave. Pelham, NY 10803-1837 Tel: 914-738-1400 or Fax: 914-738-8225 Go back to DC-DC Converters menu http://www.picoelectronics.com/dcdclow/pe62_63.htm?PartNo=5SM9S 3/25/2009