http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2006.1.13
Noise Suppression Products/EMI Suppression Filters > Lead EMIFILr Inductor Type
ø3.6±0.15
20 min. 5.0±0.3 20 min.
45 min.
ø0.65
(in mm)
∗Coating extending on leads : 1.5 max.
∗∗
(in mm)
5.0±0.3
6.0±1.0
L2L1
l L1
-
L2 l V1.5
0 max.
0.8 max.
ø0.60
ø3.6±0.15
5±0.51.2 max.
3.2 min.
26+1.5
-
0
(in mm)
5.0±0.3
6.0±1.0
L2L1
l L1
-
L2 lV1.5
0 max.
0.8 max.
ø0.60
ø3.6±0.15
5±0.51.2 max.
3.2 min.
52+2
-
1
ø0.65
10±1.0
3.7±1.0
ø3.6±0.15
5.0±0.3
(in mm)
∗Coating extending on leads : 1.5 max.
∗∗
(in mm)
7.5 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
∗There is excess bond stick on the wire.
∗
∗
(in mm)
3.4±0.2
12.7±0.2
ø0.60
H
18.0±0.5
7.5 max.
12.7
7.5 max.
5.0+0.8
-
0.2
11+0
-
1.0
Part Number
BL02RN1R2N1A
BL02RN1R2P1A
BL02RN1R2Q1A
H
16.5±0.5
18.5±0.5
20.0±0.5
Lead EMIFILr Inductor Type
BL01/BL02/BL03 Series
■ Dimension
BL01RN1A1D2B
■ Dimension
BL01RN1A1E1A
■ Dimension
BL01RN1A1F1J
■ Dimension
BL01RN1A2A2B
■ Dimension
BL02RN1R2M2B
■ Dimension
BL02RN1R2N1A/BL02RN1R2P1A/BL02RN1R2Q1A
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2006.1.13
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
∗There is excess bond stick on the wire.
∗
8.0 max. ø3.4±0.2
ø0.65
(in mm)
∗
(in mm)
3.4±0.2
12.7±0.2
ø0.60
∗
∗There is an excess bond stick on the wire.
16.5±0.5
18.0±0.5
8.0 max.12.7
12.0 max.
5.0+0.8
-
0.2
11.0+0
-
1.0
(in mm)
9.0 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
(in mm)
3.4±0.2
12.7±0.2
ø0.60
H
18.0±0.5
9.0 max.
12.7
7.5 max.
5.0+0.8
-
0.2
9.0+0
-
0.5
Part Number
BL02RN2R1N1A
BL02RN2R1P1A
BL02RN2R1Q1A
H
16.5±0.5
18.5±0.5
20.0±0.5
ø0.65
(in mm)
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
9.0 max. ø3.4±0.2
(in mm)
3.4±0.2
12.7±0.2
ø0.60
16.5±0.5
18.0±0.5
9.0max.12.7
12.0max.
5.0+0.8
-
0.2
11.0+0
-
1.0
Noise Suppression Products/EMI Suppression Filters > Lead EMIFILr Inductor Type
■ Dimension
BL02RN1R3J2B
■ Dimension
BL02RN1R3N1A
■ Dimension
BL02RN2R1M2B
■ Dimension
BL02RN2R1N1A/BL02RN2R1P1A/BL02RN2R1Q1A
■ Dimension
BL02RN2R3J2B
■ Dimension
BL02RN2R3N1A
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2006.1.13
(in mm)
8.3 max. ø2.3 max.
5.0±0.8 ø0.60
6.5 max.10.0±1.0
15.0 min.
(in mm)
2.3 max.
12.7±0.2
ø0.60
H
18.0±0.5
8.3 max.
12.7
6.5 max.
5.0+0.8
-
0.2
9.0+0
-
0.15
Part Number
BL03RN2R1N1A
BL03RN2R1P1A
BL03RN2R1Q1A
H
16.5±0.5
18.5±0.5
20.0±0.5
R
X
Z
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
X
R
Z
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
X
RZ
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
X
R
Z
Impedance (Ω)
Frequency (MHz)
Noise Suppression Products/EMI Suppression Filters > Lead EMIFILr Inductor Type
■ Dimension
BL03RN2R1M1B
■ Dimension
BL03RN2R1N1A/BL03RN2R1P1A/BL03RN2R1Q1A
■ Z-f Characteristics(Typ.)
BL01RN1A
■ Z-f Characteristics(Typ.)
BL02RN1R/BL02RN2R
■ Z-f Characteristics(Typ.)
BL02RN2R
■ Z-f Characteristics(Typ.)
BL03RN2R
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2006.1.13
(Resistance element becomes dominant
at high frequencies.)
A
B
J
BL01/BL02/BL03
All Series
BL01
Ammo Pack
Bulk
Paper Reel (ø320mm)
Code Packaging Series
Noise Suppression Products/EMI Suppression Filters > Lead EMIFILr Inductor Type
■ Equivalent Circuit
BL01RN1A/BL02RN1R/BL02RN2R/BL03RN2R
■ Packaging
■ Rated Value (p: packaging code)
Part Number Rated Current Operating
Temperature Range
BL01RN1A1D2Bp7A -40°C to +85°C
BL01RN1A1E1Ap6A -40°C to +85°C
BL01RN1A1F1Jp6A -40°C to +85°C
BL01RN1A2A2Bp7A -40°C to +85°C
BL02RN1R2M2Bp7A -40°C to +85°C
BL02RN1R2N1Ap6A -40°C to +85°C
BL02RN1R2P1Ap6A -40°C to +85°C
BL02RN1R2Q1Ap6A -40°C to +85°C
BL02RN1R3J2Bp7A -40°C to +85°C
BL02RN1R3N1Ap6A -40°C to +85°C
BL02RN2R1M2Bp7A -40°C to +85°C
BL02RN2R1N1Ap6A -40°C to +85°C
BL02RN2R1P1Ap6A -40°C to +85°C
BL02RN2R1Q1Ap6A -40°C to +85°C
BL02RN2R3J2Bp7A -40°C to +85°C
BL02RN2R3N1Ap6A -40°C to +85°C
BL03RN2R1M1Bp6A -40°C to +85°C
BL03RN2R1N1Ap6A -40°C to +85°C
BL03RN2R1P1Ap6A -40°C to +85°C
BL03RN2R1Q1Ap6A -40°C to +85°C
■ !Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
