LITE-ON SEMICONDUCTOR DF04SH thru DF10SH REVERSE VOLTAGE - 400 to 1000 Volts FORWARD CURRENT - 1.0 Amperes SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES DF-S Rating to 1000V PRV Ideal for printed circuit board Low forward voltage drop high current capability. Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has UL flammability classification 94V-0 DF-S A DIM. A B I C B D UL recognized file # E95060 C D J E G MECHANICAL DATA F E Polarity :As marked on Body Weight : 0.02 ounces, 0.38 grams Mounting position : Any G H H MIN. 8.20 6.20 MAX. 8.50 6.50 10.30 7.40 7.90 2.40 5.00 2.60 5.20 1.00 .076 .330 0.22 0.30 I J 1.02 1.53 All Dimensions in millimeter F MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL DF04SH DF06SH DF08SH DF10SH UNIT VRRM VRMS VDC 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V I(AV) 1.0 A IFSM 60 A Maximum forward Voltage at 1.0A DC VF 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 10 500 uA @TA=40 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load @TJ =25 C @TJ =125 C I 2 t Rating for fusing (t < 8.3ms) I t 10.4 AS Typical Junction Capacitance per element (Note 1) CJ 25 pF R0JA 40 C/W TJ -55 to +150 C TSTG -55 to +150 Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range 2 NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient mounted on P.C.B with 0.5x0.5"(13x13mm) copper pads. 2 C REV. 2, Sep-2010, KBDA06 AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 0.8 0.6 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.2 0.1 20 40 60 80 100 120 PEAK FORWARD SURGE CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES DF04SH thru DF10SH FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 50 40 30 20 10 Single Half-Sine-Wave 0 1 140 2 5 AMBIENT TEMPERATURE , C 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT ,(A) 10 10 1.0 TJ = 25 C 0.1 PULSE WIDTH 300us 2% DUTY CYCLE TJ = 25 C, f = 1MHz 1.0 .01 0.1 1.0 4.0 100 10.0 0 REVERSE VOLTAGE , VOLTS 0.2 0.4 0.6 FIG.5 - TYPICAL REVERSE CHARACTERISTICS TJ = 125 C 10 1.0 TJ = 25 C 0.1 0.01 0 20 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE , VOLTS 100 INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE , (pF) 20 10 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 140 1.8 Legal Disclaimer Notice DF04SH thru DF10SH Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.