1
Features
Hardware
•Supports Programming of all AT17LV, AT17N, and AT17F Series Devices
•Connection to Allow In-System Programming (ISP)
•Runs off Portable 9V DC Power Supply
•5.0V and 3.3V Supply
Software
•CPS – Configurator Programming System
•GUI-based Interface
•Supports Windows® 98/2000/XP and Windows NT®
•Online Help
•Supports Programming Reset Polarity
•Verification Routines to Validate Programming
•Accepts HEX, MCS, POF, RBF and BST File Formats
System Contents
•ATDH2200 Programming Board
•ATDH2222 20-pin PLCC Adapter
•ATDH2200E Datasheet
•ATDH2200E Programming Kit User Guide
•10-pin Ribbon Cable for ISP
•9V DC, 500 mA, 2.1 mm Center Positive/Negative Power Supply (for US customers
only)
•Sample AT17LV Devices
Description
The ATDH2200E allows designers to quickly and economically program Atmel’s family
of AT17 series FPGA Configuration Memories. The system also provides support for
new devices in the AT17 series Configurator prior to Third Party Programmer support
being available. This is a truly portable solution that allows engineers to work from
their lab bench or office.
FPGA
Configurator
Programming
Kit (Enhanced)
ATDH2200E
Rev. 0642G–CNFG–3/09
2ATDH2200E
0642G–CNFG–3/09
Figure 1. ATDH2200E Configurator Programming Board
In-System
Programming
Connector
Figure 2. In-System Programming Header
Notes: 1. Pin 10 activates SER_EN on target board.
2. NC stands for no connection.
The ATDH2200E programming board has a 10 pin header (0.1" spacing) to facilitate
in-system programming (Figure 2) of the AT17 parts. The control signals generated by
the software are fed to the header, as well as to socket U3 on the board. By placing a
similar socket on the target system and connecting the programming board to that
target system, the programming algorithms written by Atmel can be used to program an
AT17 device in-system.
ATMEL FPGA CONFIGURATOR PROGRAMMER
AT17LV(A) AT17F(A)/AT17N
(REMOVE FOR ISP)
PROGRAM VERIFY
ATDH 2200
CHW5450
REV15 03/04
IN-CIRUIT
NC(2) NC(2)
DATA
SCLK
GND
NC
DATA
SCLK
CE
RESET/OE
VCC
VCC
2
4
6
8
10(1)
(SER_EN)GND
RESET/OE
CE
1
3
5
7
9
U7
3
ATDH2200E
0642G–CNFG–3/09
Related Documents • ATDH2200E Programming Kit User Guide
• AT17 Series datasheet
• Programming Specification for Atmel’s FPGA Configuration memories
• In-System Programming Cascaded Configurators
• AT17A Series datasheet
Adapters Available for the
ATDH2200E
• ATDH2222 – 20-lead PLCC adapter (supplied with kit)
• ATDH2221 – 20-lead SOIC adapter
• ATDH2223 – 8-lead SOIC adapter
• ATDH2224 – 44-lead TQFP
• ATDH2226 – 32-lead TQFP
• ATDH2227 – 44-lead PLCC (non-A parts only)
• ATDH2227A – 44-lead PLCC (A parts only)
• ATDH2228 – 8-lead LAP
4ATDH2200E
0642G–CNFG–3/09
Schematics
Programming Connections
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
Pin 6 is A2 when in programming mode
VERIFYPROGRAM
Tri-State BiDir Data
Pin 10 activates "SEREN*" on targey board
Pin 9 is the polarizing pin (cut off)
STROBE
ATDH2200 (CHW 5450) 15
FPGA CONFIGUATOR / PROGRAMMER
A
22Thursday, March 25, 2004
Title
Size Document Number Rev
Date: Sheet of
CE
RESET_OE
DATA
CLK
SELECT_IN
CLKIN
D0
INIT
DATA
ACK
RESET_OE
CE
DATA
RESET_OE
CE
SEREN
CLK
INIT
GND
GND
D3
GND
SELECT_IN
D1
CLKIN
GND
D0
GND
AUTO_FEED
DATA_IN
GND
D6
D5
SELECT
GND
D2
D4
ACK
GND
BUSY
PE
CLK
VCC
VCC
VCC
VCC
VCC
R4
4.7K
JP2
1
2
3
C3
0.1uF P1
DB25
13
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
14
1
U1
HARRISCD74LPT244
218
416
614
812
11 9
13 7
15 5
17 3
120
19 10
1A1 1Y1
1A2 1Y2
1A3 1Y3
1A4 1Y4
2A1 2Y1
2A2 2Y2
2A3 2Y3
2A4 2Y4
1G VCC
2G GND
U3
AT17LVxx
1 8
2 7
3 6
4 5
DATA VCC
CLK SER_EN*
RESET/OE* CEO*/A2
CE* GND
R5
4.7K
U2
IN-CIRCUIT PROGRAMING
1 2
3 4
5 6
7 8
910
DATA CE*
CLK RESET/OE*
NC NC
GND VCC
NC GND
C4
.1uF
5
ATDH2200E
0642G–CNFG–3/09
Power Supply Generation
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
Layout U2 & U9 for TO-220 pkgs
R5= 3.3k for 3.3 volts
9VDC
500mA AT17F(A)/AT17NAT17LV(A)
REMOVE FOR ISP
ATDH2200 (CHW 5450) 15
FPGA CONFIGUATOR / PROGRAMMER
A
12Tuesday, March 23, 2004
Title
Size Document Number Rev
Date: Sheet of
VCC
U7
LM7805AT
1
2
3
VI
GND
VO
U9
LM317T
3
1
2
IN
ADJ
OUT
JP1
1
2
3
D2
LED
C2
0.01uF
J1
DC IN
3
2
1
D1
IN4001
S1
POWER
R2
2.4K
R3
3.3K
R1
330ohms
+C1
100uF
Headquarters International
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Atmel Asia
Unit 1-5 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
Hong Kong
Tel: (852) 2245-6100
Fax: (852) 2722-1369
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-en-
Yvelines Cedex
France
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Product Contact
Web Site
www.atmel.com
Technical Support
configurator@atmel.com
Sales Contact
www.atmel.com/contacts
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF
THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
0642G–CNFG–3/09
© 2009 Atmel Corporation. All rights reserved. Atmel®, Atmel logo and combinations thereof, and others are registered trademarks or trade-
marks of Atmel Corporation or its subsidiaries. Microsoft®, Windows® and Windows NT® are the registered trademarks of Microsoft Corporation.
Other terms and product names may be trademarks of others.
