www.ittcannon.com 75
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
HIGH-PERFORMANCE MIL-C-83733 QUALIFIED
Temperature Ranges of - 65 C to +200 C
Environment - Resistant
The Cannon DPK series are high performance envi-
ronment- resistant, rectangular connectors qualified
to MIL-C-83733 (USAF). They feature crimp snap-
in contacts in the dependable LITTLE CAESAR' rear
release contact retention assembly. This field-pro-
ven assembly permits contacts to be inserted and
extracted at the rear of the connector. Contacts are
qualified to military specifcations and are crimped
with MIL-C-22520 crimp tools, using standard lo-
cators.
The versatile DPK Connector is suitable for many
applications, particularly where environment or
thermal protection is mandatory and high reliability
is a design requirement.
SHELL SIZE
A - Small shell
B - Largge shell
CONTACT MODIFICATION
G-MIL-C-38999 contacts. Size 22D for
DPKA-131 and OPKB-185 contact arrangements
only.
W-MIL-C-38999 type contacts. Size 22D wrap
posts for DPKA-131 and DPKB-185 layouts. .025
(0.63) square posts for .340(8.64); extension
from grommet face.
CONTACT ARRANGEMENT
Shell Size A-1 8. 32, 51 and 131 (MIL-STD-1 531).
Shell Size B-48, 64, 78, 101 59W7, 71, 71C15,
161 and 185 (MIL-STO-1532).
CONTACT TYPE
P-Pin (Receptacle Connectors)
S-Socket (Plug Connectors)
POLARIZATION
Six-position shell polarization accomplished with
Polarizing pins mounted on each end of shell
flange. Available on mounting style A only.
MOUNTING STYLES
A - Two mounting holes .197(5.00) diameter
(for either nuts or jackscrews ordered sep-
rately) and two polarizing posts. (Replaces
Mounting Style B.)
C - Four MS24700-2 bushings, included for the
receptacle (M83733/5).
F - Four (4) clinch nuts jNo. 6-32 thread)
M83733/6.
G - Four .281(7.14) diameter holes (for
MS24700-2 bushings or 231-0019-000
spring mounts) (M83733/1).
H- Two mounting hole flange. Two (231-0019-
000) spring mounts on the plug and two
MS24700-2 bushing mounts on the rece-
ptacle (M83733/10/12).
K - Four captivated, non-rotating spring mounts
an the plug (M83733/4).
M- Two mounting hole flange. Two mounting
holes .281(7.14) diameter (for MS24700-2
bushings or 231-0019-000 spring mounts)
(M83733/9).
MIL-C-83733 (USAF) Nomenclature
MILITARY PART NUMBER INDICATOR
BASIC SPECIFICATION
SPECIFICATION SHEET NUMBER
CLASS: R - ENV IRONMENT RESISTANT
SHELL SIZE
CONTACT ARRANGEMENT
ITT Cannon Nomenclature
SERIES PREFIX
ITT CANNON DESIGNATION
SHELL SIZE
CONTACT MODIFICATION
CONTACT ARRANGEMENT
CONTACT TYPE
POLARIZATION (applicable to mounting style A)
CONNECTOR MOUNTING STYLE CONNECTOR
MATERIALS PER MIL-C-83733
FURNISHED LESS CONTACTS
(will not be stamoed an connector).
M 83733/4 R B 101
DPK B - G 185 S * K - 7 F0
DPK A - G 131 P * G - 7 F0
X - Two guide pins with two (231-0019-000)
spring mounts on the plug and two guide
sockets with two .197(5.00) diameter holes
on the receptacle (M83733/2; /3)
Y - Two guide sockets with two (231-0019-
000) spring mounts on the plug and two
guide pins with .197(5.00) diameter holes
on the receptacle (M83733/7; /8).
Z - Two staggered clinch nuts an the receptacle
(No. 6-32 thread) (MB3733/11).
MATERIAL MOOIRCATION
- 7 standard product line, environment resistant
per MIL-C-83733(USAF). QPL M83733
These high performance connectors are available in
two shell sizes with a variety of mounting config-
urations. There are 13 con-
tact arrangements available
accommodating from 18 to
185 standard contacts. The
standard contacts are avail-
able in sizes 12, 16, 20 and
220. Shells are a die-cast
aluminum alloy with eiectro-
less nickel finish. Insulators are a high grade,
glass reinforced, resin conforming to MIL-M-14
which meets or exceeds the requirements of
MIL-C-83733. Silicone rubber is used for wire
sealing grommets, interfacial and peripheral
seals.
How To Order
www.ittcannon.com 76
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Performance and Material Specifications
Cross Reference From Military to Cannon Part Numbers
MIL-SPEC P/N ITTC P/N MIL-SPEC P/N ITTC P/N MIL-SPEC P/N ITTC P/N MIL-SPEC P/N ITTC P/N
MATERIALS
Shell
Insulator
Contacts
Grommets and Seals
Mounting hardware
Shell Sizes
Coupling
Contact Arrangements
Contact Termination
A (DPKA); B (DPKB)
Friction, spring mount or jackscrew-coupling nut
A-18,32,51,g131
B-48,64,78,101,59W1,71C15,161,
G185
Crimp
Shell
Contacts
Hardware
Max. current carrying capacity of contacts
Test Voltages (AC-RMS)
Altitude
(feet)
Sea level
50,000
70,000
110,000
M83733/1RA018
M83733/1RA032
M83733/1RA051
M83733/1RA131
M83733/1RB048
M83733/1RB064
M83733/1RB071
M83733/1RB71C
M83733/1RB078
M83733/1RB101
M83733/1RB185
M83733/2RA018
M83733/2RA032
M83733/2RA051
M83733/2RA131
M83733/2RB048
M83733/2RB064
M83733/2RB071
M83733/2RB71C
M83733/2RB078
M83733/2RB101
M83733/3RA018
M83733/3RA032
M83733/3RA051
M83733/3RA131
M83733/3RB048
M83733/3RB064
M83733/3RB071
M83733/3RB71C
M83733/3RB078
M83733/3RB101
M83733/3RB185
DPKA-18PG-7
DPKA-32PG-7
DPKA-51PG-7
DPKA-G131PG-7
DPKB-48PG-7
DPKB-64PG-7
DPKB-71PG-7
DPKB-71C15PG-7
DPKB-78PG-7
DPKB-101PG-7
DPKB-Gl85PG-7
DPKA-18SX-7
DPKA-32SX-7
DPKA-51SX-7
DPKA-Gl 31 SM
DPKB-48SX-7
DPKB-64SX-7
DPKB-71SX-7
DPKB-71C15SX-7
DPKB-78SX-7
DPKB-101SX-7
DPKA-18PX-7
DPKA-32PX-7
DPKA-51PX-7
DPKA-G131PX-7
DPKB-48PX-7
DPKB-64PX-7
DPKB-71PX-7
DPKB-71C15PX-7
DPKB-78PX-7
DPK- 101PX-7
DPKB-G185PX-7
M83733/4RA018
M83733/4RAO32
M83733/4RA051
M83733/4RA131
M8373314RA048
M8373314RB064
M83733/4RB071
M83733/4RB71C
M83733/4RB078
M83733/4RB101
M83733/4RB185
M83733/5RA018
M83733/5RA032
M83733/5RA051
M83733/5RA131
M83733/5RB048
M83733/5RB064
M83733/5RB71C
M83733/5RB078
M83733/5RB101
M83733/5RB185
M83733/5RB071
M83733/6RA018
M83733/6RA032
M83733/6RA051
M83733/6RA131
M83733/6RB048
M83733/6RB064
M83733/6RB071
M83733/6RB71C
M83733/6RB078
M83733/6RB101
M83733/6RB185
DPKA-18SK-7
DPKA-32SK-7
DPKA-51SK-7
DPKA-G131 SK-7
DPKB-48SK-7
DPKB-64SK-7
DPKB-71SK-7
DPKB-71Cl 5SK-7
DPKB-78SK-7
DPKB-101 SK-7
DPKB-G185SK-7
DPKA-18PC-7
DPKA-32PC-7
DPKA-51PC-7
DPKA-G131 PC-7
DPKB-48PC-7
DPKB-64PC-7
DPKB-71C15PC-7
DPKB-78PC-7
DPKB-101PC-7
DPKB-G185PC-7
DPKB-71PC-7
DPKA-18PF-7
DPKA-32PF-7
DPKA-51PF-7
DPKA-G131 PF-7
DPKB-48PF-7
DPKB-64PF-7
DPKB-71PF-7
DPKB-71C15PF-7
DPKB-78PF-7
DPKB-101 PF-7
DPKB-G185PF-7
M83733/7RA018
M83733/7RA032
M83733/7RA051
M83733/7RA131
M83733/7RB048
M83733/7RB064
M83733/7RB071
M83733/7RB71C
M83733/7RB078
M83733/7RB101
M83733/BRA018
M83733/BRA032
M83733/BRA051
M83733/8RB048
M83733/8RB064
M83733/8RB071
M83733/8RB71C
M83733/BRB078
M83733/8RB101
M83733/9RA018
M83733/9RA032
M83733/9RA051
M83733/9RB048
M83733/9RB064
M83733/9RB071
M83733/9RB71C
M83733/9RB078
M83733/9RB101
DPKA-18SY-7
DPKA-32SY-7
DPKA-51SY-7
DPKA-G131SY-7
DPKB-48SY-7
DPKB-64SY-7
DPKB-72SY-7
DPKB-71C15SY-7
DPKB-78SY-7
DPKB-101 SY-7
DPKA-18PY-7
DPKA-32PY-7
DPKA-51PY-7
DPKB-48PY-7
DPKB-64PY-7
DPKB-71PY-7
DPKB-71Cl 5PY-7
DPKB-78PY-7
DPKB-101PY-7
DPKA-IBPM-7
DPKA-32PM-7
DPKA-51 PM-7
DPKB-48PM-7
DPKB-64PM-7
DPKB-71PM-7
DPKB-11C15PM-7
DPKB-78PM-7
DPKB-101PM-7
M83733/10RA018
M83733/10RA032
M83733110RA051
M83733/10RB048
M83733/10RB064
M83733/10RB071
M83733/10RB71C
M83733110RB078
M83733110RB101
M83733/11RA018
M83733/11RA032
M83733/11RA051
M83733/11RB048
M83733/11RB064
M83733/11RB071
M83733/11RB71C
M83733/11RB078
M83733/11RB101
M83733/12RA018
M83733/12RA032
M83733/12RA051
M83733/12RB048
M83733/12RB064
M83733/12RB071
M83733/12RB71C
M83733/12RB078
M83733/12RB101
DPKA- 18PH-7
DPKA-32PH-7
DPKA-51PH-7
DPKB-48PH-7
DPKB-64PH-7
DPKB-71PH-7
DPKB-71C15PH-7
DPKB-78PH-7
DPKB-101PH-7
DPKA-18PZ-7
DPKA-32PZ-7
DPKA-51PZ-7
DPKB-48PZ-7
DPKB-64PZ-7
DPKB-71PZ-7
DPKB-71C15PZ-7
DPKB-78PZ-7
DPKB-101 PZ-7
DPKA-18SH-7
DPKA-32SH-7
DPKA-51SH-7
DPKB-48SH-7
DPKB-64SH-7
DPKB-71SH-7
DPKB-7lCl5SH-7
DPKB-78SH-7
DPKB-101SH-7
-
87.5
35.5
5.74
1300
800
800
800
1800
1000
1000
1000
1300
550
350
200
1800
600
400
200
1000
350
250
150
Equivalent
Pressure
(Torr)
Service Ratings (M&l)
Mated
M l lM
Unmated Unmated
161
Arrangement
Contact Size:
Amperage:
#12
23
#16
13
#20
7.5
#22
5.0
Number of contacts: 18 thru 185
Contact
Sizes
22D
20
16
12
12
Shielded
22,24,26
20,22,24
16,18
12,14
RG-179/U
.030(0.76)
.040(1.02)
.063(1.60
.081(2.06)
.081(2.06)
.060(1.52)
.083(2.11)
.103(2.62)
.158(4.01)
.158(4.01)
Wire Accommodation
(AWG) Min. Max.
Sealing Range
Wire Diameter
Electroless nickel plate per
MIL-C-26074, Class 3
Gold over suitable underplate per
MIL-C-39029
Passivate/Cadmium plate
Diecast aluminum alloy A-380 per QQ-A-591
Thermosetting Plastic/Thermoplastic
Copper allowy per QQ-C-533
Silicone base elastomer
Stainless stell/Alloy steel
FINISHES
ELECTRICAL
MECHANICAL FEATURES
www.ittcannon.com 77
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Test Data
The following is a presentation of the certified
capabilities of Cannon's DPK, high performance,
rectangular, rack and panel series connectors with
respect to critical qualification performance and
design requirements of MIL-C-83733. The data
presented herein is a condensation of authentic
qualification test data extracted from the original
qualification reports on file at the ITT Cannon Test
Laboratory.
Examination Of Product
visual Examination
Sample Preparation
Insulation Resistance - 25 C
Withstanding Voltage - Sea Level
Withstanding Voltage - Altitude
Contact Resistance
Test Description
Examination Of Product
visual Examination
Sample Preparation
Insulation Resistance - 25 C
Withstanding Voltage - Sea Level
Withstanding Voltage - Altitude
Contact Resistance
VISUAL
EXAMINATION
SAMPLE
PREPARATION
INSULATION RESISTANCE
[25 C (77 F)]
DIELECTRIC
WITHSTANDING
VOLTAGE (SEA LEVEL)
SALT SPARY (CORROSION)
CONTACT RESISTANCE
[AT 25 C AND 200 C
(77 F AND 392 F)]
CONTACT SEPARATING FORCES
CONNECTOR MATIN AND
UNMATING FORCES
CONTACT RETENTION
ENDURANCE (DURABILITY)
MIL-W-16878/4A, 28 AWG (min. dia.) and 22 AWG (max. dia.) wire.
Daniels WA22A crimping tool. M22520/2-06 and M22520/2-09 contact
positioner for resp.22D size socket and pin. MS7495A22M insertion and
MS27495R22M removal tool.
Unmated condition. 50% of contact complement measured. Between adjacent
contact paris and each contact and connector shell.
Unmated condition. 50% of contact complement measured. Test voltage 1350
Vac/rms-60hz, applied between adjacent contact pairs and each contact and
connector shell.
Method 101, test condition B. (48 hours) unmated. Salt soultion 5% by
weight. S.G. 1.026 to 1.040 at 22.8 C-23.9 C (73 F-75 F). Solution pH6.5
to 7.2 and chamber temp 33.9 C to 36.1 C (93 F to 97 F).
Mated condition 20% of contact complement tested. Test circuit per Fig. 2
measured across points YY performed at 25 C and 200 C (77 F and 392 F).
100% of socket contact complement measured. Separating force measured
on steel test pin .0294 +_.0001 (0.747 +_O.002) dia. insertion depth .205
(5.21) min. from insert face.
Mating dept, .390 (9.91) panel spacing. Total of 10 cycles mating and
unmatings. Forces measured on 10th cycle.
Mating dept, .450 (11.43) panel spacing. Total of 500 cycles mating and
unmating at a rate of 300 cycles/hour maximum.
Unmated. 50% of contacts measured. 10.0 1bf applied to contact engaging
end. Zero reference at 2.0 1bf preload. Displacement measured under spec.
load.
Contact/
Wire size
22D/28
22D/22
Test Current
Adc
1.5
5.0
Wire
Size
28
22
Min.
0.6 Max.
4.9
25 C
(77 F)
8
14
200 C
(392 F)
19
25
Wire
Size
28
22
28
22
DPKA Sep. Force
1.3-4.1
DPKB
1.0-2.9
Avg. Force
2.4
2.0
Mate
145
150
0.002-0.003
0.002-0.004
0.002-0.004
0.002-0.003
Avg.
0.0027
0.0031
0.0027
0.0026
Unmated
34
72
Range
(mV)
2.3-5.2
6.3-10
9-17
16-21
Cont./Shell
1.1T-1.8T
1.1T-20T
Avg.
(mV)
3.8
8.2
11.8
17.8
(200 C)
Adc
1.5
5.0
1.5
5.0
Assure compliance with:
a) Applicable detail specifications and control drawings
b) Materials
c) Design and construction
d) Dimensional
e) Finish
f) Product identification
g) Workmanship
Visual examination of qualification test specimens for completness,
workmanship, identification and /or other detrimental conditions.
Compliance to applicable detail specification and
control drawings.
Visual examination acceptance.
Assemblies to conform with specified wiring and
termination requirements.
5.1 Gigohms minimum at 500 Vdc.
Electrification Time 120 secs. maximum.
No electrical breakdown, flashover or excessive
current leakage.Electrification 2 secs.
minimum.
Visual examination. No degradation of normal
connector functions.
Max. Voltage Drop (MV)
Separating Force (ounce-force)
Axial mating and unmating forces 175
pounds-force maximum.
Max. contact displacement under 10.0 1bf load
.011 (0.28) maximum.
Withstand 500 cycles of durability conditioning
without detrimental effects to function.
Product submitted accompanied by Q.A.certifiates of compliance.
complied with the applicable acceptance requirements for qualification
testing.
No visible detection of any condition detrimental to normal function.
Qualification test specimens prepared and terminated in accordance
with specified wiring requirements. No difficulties encountered during
wiring operation.
Insul. res. range (ohms) (25 C) DPKA
Adj. Cont.
300G-1.0T
DPKB
400G-1.6T
(Ganged parallel test circuits)
No evidence of breakdown or flashover Leakage <.5mA. (Ganged
Parallel test circuits)
No detrimental corrosive attack on connector's surface finish or
contacts.
MV-Drop Range. (25 C)
Separating force range (ounce-force)
Mating/Unmating Force (pound-force)
Contact Displacement Range (inch)
DPKA
Pins
Sockets
DPKB
Pins
Sockets
DPKA
DPKB
Forces obtained on 10th cycle.
Test or
Environment Test Level or
Special Requirments Parameters Limits Measured Values
or Comments
Contact Separating Forces
Connector Mating and Unmating Forces
Contact Retention
Endurance
Gold Plating Porosity
Temperature Life
Insulation Resistance - 200 C
Test Description
Low Leve Contact Resistance
Thermal Shock
Crimp Potential Drop
Vibration (Random)
Physical Shock
Ozone Exposure
Fluid Immersion
Test Description
Moisture Resistance
Altitude Immersion
Insert Retention
Corrosion
Analyses
Service and Storage Life
Gases and Toxic or Corrosive Fumes
Test Description
The successful completion of the conducted qual-
ification program clearly demonstrates the compli-
ance of ITT Cannon, DPK series connectors and
contacts to meet or exceed the performance re-
quirements of MIL-C-83733.
Identification of Qualification Specimens
The DPK connectors listed below represent the
description and identification of the test specimens
TABLE 1 TEST PERFORMED
TABLE ll
subjected to the qualification test sequence of
MIL-C-83733.
DPKA-G-131PC-7 (Receptacle) DPKB-G185PC-7 (Receptacle)
DPKA-G131SK-7 (Plug) DPKA-G185SK-7 (Plug)
DPKA-G-131PC-7 (Receptacle) DPKB-G185PC-7 (Receptacle)
Table I below, lists the conducted tests executed in
accordance with the applicable test paragraphs of
MIL-C-83733, with the Test Level, Parrameter
Limits and Measured Values listed in Table 11.
www.ittcannon.com 78
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Test Data (Continued)
THERMAL SHOCK
CRIMP POTENTIAL DROP
DIELECTRIC WITHSTANDING
VOLTAGE (ALTITUDE)
INSULATION RESISTANCE ELEVATED
TEMP.[200`C (392 F)]
VIBRATION (RANDOM)
PHYSICAL SHOCK
MOISTURE RESISTANCE
ALTITUDE IMMERSION
INSERT RETENTION
OZONE EXPOSURE
FLUID IMMERSION
GOLD PLATING POROSITY
TEMPERATURE LIFE W/CONTACT
LOADING
Conclusion
All subject test specimens, connector components,
materials, accessories and contacts covered by this
report satisfied and/or exceeded the specified
requirement.
The successful completion of the qualification pro-
gram as reported herein, demonstrates the capa-
bilities of the subject ITT Cannon DPK series
connectors to comply with stringent verification
qualification requirements in accordance with
MIL-C-83733. On the basis of testing, the DPK
connector series was granted full OPl status to
MIL-C-83733.
Mated condition. Five continuous cycles of temperature change. 30 mins.
exposure at each temp. extreme constitutes one cycle. Transfer time
between chambers 2 mins. max. temp. extremes: - 54 ± 3 C and 200
± 3 C (-?? +_ 5.4 F and 392 ± 5.4 F).
Fluid immersion rest fluids and procedures per Table 4:
Sample
No.
4-1P/R
4-2P/R
4-3P/R
4-4P/R
4-5P/R
4-6P/R
4-7P/R
4-8P/R
4-9P/R
4-10P/R
4-11P/R
4-12P/R
MIL-L-7808
MIL-L-23699
M2-V CHEVRON
MIL-H-5606
MIL-A-8243
MIL-C-25769
MIL-T-5624 (JP-5)
Coolanol-25
Regular (Leaded commercial auto-gasoline
Solvent (a) MIL-STD-202)
Solvent (b) MIL-STD-202)
Solvent (c) MIL-STD-202)
Test Fluid
Unwired. wouisembled contact bodies. One part (by volume) concentrated
Nitric Acid (S.G.-l.42) to we part distilled water. 30 secs. minimum
immersion period.
Wired mated condition, with contacts under specific load: #220 (5 lbs.);
#16 112.5 Ilisil. A current of 100 MA was applied during life of test. Test
duration, 1000 hours at temperature of + 200 C (392*9).
20% of the contacts in each connector measured. Test circuit per Fig. 2
measured across points X-X and X'-X'. Max. crimp potential drop:
Same as at sea level conditions.
204 Megohms minimum at 500 Vdc.
Electrification time 120 sets. maximum,
No current discontinuity ) 1.0 microsec. No
cracking, breaking or loosening of connector
parts.
No current discontinuity ) 1.0 microsec. No
cracking, breaking or loosening of connector
parts.
Insulation resistance at final humidity cycle 102
Megohms minimum at 50 Vdc.
Insulation resistance 1.2 Gigohm minimum at 5
Vdc. DWV 1350 Vac/rms - 60 Hz,
electrification time 60 secs. minimum. No
breakdow, flashover or leadage 2 mA,
No insert disiocation from normal position in the
connector shell.
No derterioration.
No detrimental damage of effects to connector
performance.
Axial
Mate and unimate forces after fluid immersion
175 1bf max.
No visible reaction (bubbles forming) to reagent.
Withstand temp life. No damage. No
discontinuity higher than 1.0 microsecond. No
contact dislodging order load.
Mated condition. 50% of contact complement measured. Performed
at simulated altitude of 70,000 ft. (33.7 min Hg pressure) Test voltage 825
Vac/rms-60 Hz, applied between adjacent contact pairs and each contact
and connector shell.
Umnated condition. 50% of contact complement measured. Test points
identical to those measured at 25 C (77 F). Oven ambient controlled at
200 C (392 F). Stabilization period 30 minutes minimum.
Method 214, Test condition 11. Letter 'G'. Test level envelope per figure and
table 214-2. Contact circuit senes wired far current discontinuity monitoring.
Eight hours duration in each of three mutually peipendicuiar axes. Connector
mating depth .450 (11.43) panel spacing.
Mated condition, .450 111.43) panel spacing. Shock pulse duration I I ± 1
mS, waveshape terminal peak smooth, peak amplitude 20g. Contact circuit
series wired for current discontinuity monitoring. One shock pulse in each of
three mutually perp. axes.
Method 106, (Step 7b) ommed) Mated condition. 10 days humidity and
temperature cycling. At end Step 6 final cycle at 25 C (777) and 90-98%
RH insulation resistance in asured 100% between each and ail other
contacts and the shell in parallel circuit.
Mated condition. Immersed in 5% sail solution by weight. Unsealed wire
ends exposed to chamber atmosphere. Simulated test altitude 75,000 ft,
(1.0 inch Hg). 30 mins. at altitude followed by 15 arms. at room ambient,
Repeat for total of 3 cycles. Insul. res. and OWV measured 100% of contact
complement at room ambient and submerged.
Unmated. 46 lbf/in.2 pressure lead applied to each inert face at 5
1bl/in. 2/sec.. maintained for 5 secs. min. at specified load.
Unimated. Ozone concentration 0.010 to 0.015 percent by volume. Exposure
period 2 hours minimum at room temperature.
Contact/Wire-size
22D/28
22D/22
Test Current (Adc)
1.5
5.0
Wire
Size
28
22
M.V.
2.8
7.0 (Pins)
DPKB (sockets)
(Pins)
DPKB
(Ganged parallel test circuits)
Adc
1.5
1.5
Adc
5.0
5.0
Adj. Cont.
1.4G-10G
0.75G-10G
Cont./Shell
2.4G-4.0G
2.26G-5.0G
Range
1.7-2.1
1.1-1.6
Range
1.8-2.4
1.4-1.8
Avg.
1.8
1.3
Avg.
2.1
1.5
Compliance to applicable detail specification and
control drawings. Product submitted accompanied by Q.A.certifiates of compliance.
complied with the applicable acceptance requirements for qualification
testing.
Crimp mV drop range.
DPKA (sockets)
No evidence of breakdown or flashover. Leakage <.5mA. (Ganged
Parallel test circuits)
Insul. Res. range (ohms) [200 C (392 F)]
DPKA
Insul. Res. range (ohms ) final humidity cycle.
DPKA
Final insul. Res ranges (ohms).
DPKA
DWV - No evidence of insert movement and /or dislocation from
normal position
No evidence of insert movement and/or dislocation from normal
position.
No evidence of ozone effects.
Other than evidence of normal light swelling of the connector resilent
seals, the samples did not exhibit any dertirmental affects. Mateability
was not imparied.
No evidence of reaction to reagent.
No evidence of contact dislodging and/or electrical disconinuity of 1.0
miscrosecond or greater during the speified temperature life exposure
under contact loading conditions. All post test requirements were met.
DPKA
4-1P/R
4-2P/R
4-3P/R
4-4P/R
4-5P/R
4-6P/R
DPKB
4-7P/R
4-8P/R
4-9P/R
4-10P/R
4-11P/R
4-12P/R
Mate
125
125
127
132
132
123
Mate
138
141
137
145
150
148
Unmated
27
31
35
35
63
55
Unmated
71
57
63.5
76
81
86
1.66-500G
Avg: 224G
1.5T-4.5T
Avg. 1.9T
After Fluid Immersion
Mating/Unmating forces
(Pound-Force)
1.6-500G
Avg: 190G
0.7-3.5T
Avg: 1.3T
DPKB
DPKB
Connectors met random vibration requirements. No electrical
discontinuity detected.
Connectors met physical shock requirenments. No electrical
discontinuity or damage detected.
Test or
Environment Test Level or
Special Requirments Parameters Limits Measured Values
or Comments
(TABLE ll Continued)
www.ittcannon.com 79
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Weights
The following are weights for DPK connector assemblies, mounting hardware, contacts, and sealing plugs.
All connector weights are listed less contacts (FO) and mounting hardware. The total connector weight is
obtained by adding mounting hardware, contacts, and sealing plugs weight to the connector assembly
weight.
Example:
DPKB-101SK-7 (with 90 contacts and 11 sealing plugs) Weight
Pounds
Maximum Weight
Lbs. Grams
Weight
Grams
DPKB-101SG-7-FO
Type K Spring Mount
90 Number 20 Socket Contacts
11 Number 20 Sealing Plugs
Maximum Connector Weight
.2332
.0825
.0639
.0020
.3816
105.78
37.42
28.98
.88
173.06
Part Numbet
(Description)
DPKA-18PG-7-F0
DPKA- I 8SG-7-F0
DPKA-32PG-7-F0
DPKA-18SG-7-F0
DPKA-51PG-7-F0
DPKA-51SG-7-F0
DPKA-G131PG-7-F0
DPKA-G131SG-7-F0
DPKB-48PG-7-F0
DPKB-48SG-7-F0
DPKB-59W7PG-7-F0
DPKB-59W7SG-7-F0
DPKB-64PG-7-F0
DPKB-64SG-7-F0
DPKB- 71 PG-7-F0
DPKB-71SG-7-F0
DPKB-71C1 5PG-7-F0
DPKB-71C1 5SG-7-F0
DPKB-78PG-7-F0
DPKB-78SG-7-F0
DPKB-1O1PG-7-F0
DPKB-101SG-7-F0
DPKB-Gl 85PG-7-F0
DPKB-G1 85SG-7-F0
.1474
.1496
.1496
.1518
.1529
.1551
.1045
.1077
.2398
.2486
.2354
.2442
.2354
.2442
.2288
.2332
.2288
.2332
.2266
.2288
.2288
.2332
.1628
.1650
66.86
67.86
57.86
68.86
69.35
70.35
47.40
48.85
108.77
112.76
106.78
110.78
106.78
110.78
103.78
105.78
103.78
105.78
102.78
103.78
103.78
105.78
73.85
74.85
1.353
1.318
.611
.664
.280
.322
.093
.111
.943
1.168
1.910
2.948
2.750
37.42
.325
5.350
#12 Pin, 030-9185-003
#12 Skt, 030-9186-003
#16 Pin, 030-9205-007
#16 Skt, 030-9206-006
#20 Pin. 030-9173-006
#20 Skt, 031-9174-004
#220 Pin, 030-2042-000
#220 Skt, 031-1147-000
#12 Shielded Pin, 249-1825-001
#12 Shielded Skt, 249-1826-000
#8 Coaxial Pin, 59W7 Layout
#8 Coaxial Skt, 59W7 Layout
Type C Bushing, 012-0515-000 (4 reqd)
Type K Spring Mtg Captive (non-rotate)
Type F Nut (4 reqd)
Type G Spring Mtg 231-0019-000 (4 reqd)
.00298
.00291
.00135
.00146
.00062
.00071
.00021
.00025
.00206
.00258
.00420
.00650
.00606
.08250
.00072
.01180
Size 22; 225-1013-000
Size 20; 225-0070-000
Size 16; 225-0071-000
Size 12; 225-0072-000
SEALING PLUGS
.00006
.00018
.00036
.00064
.027
.080
.163
.291
www.ittcannon.com 80
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Receptacle (Pin Contacts)
BASIC RECEPTACLE SHELL DIMENSIONS
DPK TYPES
DPK/Mil-C-83733 TYPES
L
C
B
A
.562 ± .004
(14.27 ± 0.10)
.890 ± .005
(22.61 ± 0.13)
1.000 ± .010
(25.40 ± 0.25)
1.002 ± .008 - .017
(25.42 ± 0.20 - .43)
1.158 ± .012
(29.41 ± 0.30
.111 ± .008 - .007
(2.82 ± 0.20 - 0.18
.532 ± .008
(13.51 ± 0.20)
.281 ± .005 DIA.
(7.14 ± 0.13)
4 HOLES
.141 MAX.
(3.58)
.138 (3.50) - 32 CLINCH NUT
(4 PLACES) THREAD
JUNCTION SHELL
AND SCREW
.526 + .008 - .007
(13.36 + 0.20 - 0.18)
1.385 MAX.
(35.16)
1.135 MAX.
(28.83)
.312 ± .010R 4 PLCS.
(7.92 ± 0.25) .188 ± .010 R. TYP.
(4.78 ± 0.25)
.197 ± .005 DIA.
(5.00 ± 0.13)
2 HOLES
.500 MAX.
(12.70) POLARIZING POST
2 REQD.
COUPLING NUT
Junction shell and screws are not supplied on - G131 and -G185 layouts.
DPKA*P** 2.085 (52.96)
2.072 (52.63)
3.385 (85.98)
3.372 (85.65)
1.976 (50.19)
1.961 (49.81)
3.281 (83.34)
3.261 (82.83)
2.580 (65.58
2.570 (65.38)
3.880 (98.53)
3.870 (98.32)
3.030 (76.96)
3.000 (76.20)
4.330 (109.98)
4.300 (109.22)
2.150 (54.61)
2.130 (54.10)
3.450 (87.63)
3.430 (87.12)
DPKB*P**
See Page 81 Style M and Z
SHELL SIZE A B C L N
Staggered
JAM NUT
RECEPTACLE
REF. PANEL NUT
PLUG
CONNECTOR
REF.
RECEPTACLE
CONNECTOR
REF.
PANEL
Mounting Style A
Mounting Style G
Standard Hole Mounting MIL-C-83733/1(USAF) Mounting Style F Clinch Nut Mounting
MIL-C-83733/6(USAF)
Mounting Dimensions for Coupling Nut Assemblies
1
1
1
www.ittcannon.com 81
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Receptacle/Configurations (Pin Contacts)
DPK/MIL-C-83733 TYPES
DPK/MIL-C-83733 TYPES
Mounting Stye C
Bushing Mounting MIL-C-83733/5(USAF)
Mounting Stye Y
With Guide Pins MIL-C-83733/8(USAF)
Mounting Stye H
Staggered Bushing Mounting MIL-C-83733/10(USAF) Mounting Stye Z
Staggered Clinch Nut Mounting MIL-C-83733/11(USAF)
Mounting Stye M
Staggered Standard Hole Mounting MIL-C-83733/9(USAF)
Mounting Stye X
With Guide Sockets MIL-C-83733/3(USAF)
.405 ± .010
(10.29 ± 0.25)
ACROSS HEX FLATS
1.060 ± .010
(26.92 ± 0.25)
.200 ± .002
(5.08 ± 0.05)
.281 ± .005 DIA.
(7.14 ± 0.13) FLANGE
HOLE
RECOMMENDED SCREW
.138 (3.50) - 32 UNC-2A FLH
(3/8 LONG) THREAD .141 (3.58) MAX.
.138 (3.50) - 32 UNC-28 CLINCH NUT
2 PLACES
THREAD
.281 ± .005 DIA.
(7.14 ± 0.13)
2 HOLES
N
.190 (4.82 - 32 UNF-2
1.370
(34.80)
MAX.
31
29
.207 ± .002 DIA.
(5.26 ± 0.05)
16
14
.477 + .008/ - .007
(12.12 + 0.02/ - 0.18)
.197 + .003 - .002 DIA>
(5.00 + 0.008 - 0.005)
2 HOLES
.312 (7.92) - 24 UNF-2A
.281 ± .005 DIA.
(7.14 ± 0.13)
RECOMMENDED SCREW
.138 (3.50) - 32 UNC-2A (3/8 LONG)
THREAD
MS24700-2
BUSHING
FLANGE
HOLE
www.ittcannon.com 82
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Pluge/Configurations (Socket Contacts)
Basic Plug
Shell Dimensions
DPK Styles
Junction shell and hardware are not supplied on -G131 and
-G185 layouts.
See page 83 Style M and H
1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 118 pounds minimum at .500 (12.70) panel spacing and 176
pounds maximum at .390 (9.91) panel spacing
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 118 pounds minimum at .500 (12.70) panel spacing and 176
pounds maximum at .390 (9.91) panel spacing
3. This configuration must not be used on teh 131 or 185 contact layouts.
NOTES:
L
D
A
TYP.
Mounting Style A
Mounting Spacing Dimensions
For Jackscrew Assemblies
Mounting Style X - MIL-C-83733/2(USAF)
With Guide Pins and Spring Mounting
Mounting Style K - MIL-C-83733/4(USAF)
With Captive Springs
DPK/MIL-C-83733 TYPES
DPKA*P** 1.959 (49.76)
1.946 (49.43)
3.259 (82.78)
3.246 (82.45)
1.864 (47.35)
1.853 (47.07)
3.164 (80.37)
3.153 (80.09)
1.780 (45.21)
1.763 (44.78)
3.080 (78.23)
3.063 (77.80)
2.580 (65.53)
2.570 (65.28)
3.880 (96.52)
3.870 (98.30)
3.030 (76.96)
3.000 (76.20)
4.330 (109.98)
4.300 (109.22)
2.150 (54.61)
2.130 (54.10)
3.450 (87.63)
3.430 (87.12)
DPKB*P**
SHELL SIZE A B C D L N
Staggered
1
1.158 ± .012
(29.41 ± 0.30)
.312 ± .010
(7.92 ± 0.25)
4 PLACES
.125 ± .010R.
(3.18 ± 0.25)
2 PLACES
.532 ± .008
(13.51 ± 0.20)
.116 ± .080
(2.94 ± 2.03)
.200 ± .002 DIA.
(5.08 ± 0.05)
.116 ± .080 DIA.
(2.94 ± 2.03
1.370
(34.80)
MAX.
.190 (4.82) -32 UNF-2
31
29
.190 (4.82) -24 UNC-2A
THREAD
.138 (3.50) -32 UNC-2B
THREAD
.562 ± .004
(14.28 ± 0.10)
.780 ± .005
(19.81 ± 0.13)
.878 ± .005
(22.56 ± 0.13)
.700 ± .010
(17.78 ± 0.25)
1.265 MAX.
(32.13)
1.010 MAX. (25.65)
1.002 +.008 - .017
(25.45 +_ 0.20 - 0.43)
JUNCTION SHELL
.030 + .010 - .000R
(0.76 + 0.25 - 0)
4 PLACES
.622 + .006 - .007
(15.80 + 0.20 - 0.18)
.111 + .008 - .007
(2.82 + 0.20 - 0.18)
THRUST WASHER JACKSCREW
305-0007-000
JACKSCREW ASSY
.196 + .004 - .003 DIA.
(5.03 + 0.10 - 0.06)
2 HOLES
.500 MAX.
(12.70) POLARIZING POST
2 REQD.
.138 (3.50) - 32 UNC-2A
THREAD
.390 MAX.
(9.91)
.1.250 (31.75)MAX.
SPRING IN FREE
POSTION
RETAINING RING
.040 (1.02) DIA.
WIRE HOLE SAFETY
CONNECTOR
PLUG
CONNECTOR
RECEPTACLE
CONNECTOR
PANEL (REF.)
C
B
www.ittcannon.com 83
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Pluge/Configurations (Socket Contacts)
DPK/MIL-C-83733 TYPES
DPK Commercial Types
Mounting Style Y - MIL-C-83733/7(USAF)
With Guide Sockets and Spring Mounting Mounting Style H - MIL-C-83733/7(USAF)
Staggered Spring Mounting
See page 82
Mounting Syle M
Mounting
See page 82
Mounting Style F
Clinch Nut Mounting
Mounting Style G
Standard Hole Mounting
1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 118 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
NOTES:
ACROSS HEX FLATS
.138 (3.50)-32 UNC-2B THREAD .138 (3.50)-32 UNC-2B THREAD
N
.138 (3.50)-32 UNC-2B THREAD
.141 (3.58)
MAX.
1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 118 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
3. This configuration must not be used on teh 131 or 185 contact layouts.
NOTES:
.405 ± .010
(10.28 ± 0.25)
.207 ± .002 DIA.
(5.26 ± .005)
.281 ± .005 DIA.
(7.14 ± 0.12)
4 HOLES
.281 ± .005 DIA.
(7.14 ± 0.12)
4 HOLES
N
.116 ± .080
(2.94 ± 2.03)
.116 ± .080
(2.94 ± 2.03)
.485 MAX
(12.32)
1.250 (31.75) MAX.
SPRING IN FREE
POSITION
1.250 (31.75) MAX.
SPRING IN FREE
POSITION
.312 (7.92) - 24 UNF-2A
THREAD
16
14
www.ittcannon.com 84
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Mounting Styles/Applications
DPK connectors for rectangular or staggered
mounting are available in both two- and four-spring
mount assemblies, or the same shelf style may be o
rdered to accommodate bushing assemblies. In the
spring mount version the spring-loaded mechanism
will compensate for a panel space variation of up to
.070(1.78) while insuring electrical and environ-
mental integrity.
Style A
Mounting style A is designed for cord-to-panel and c
ord-to-cord applications. Connectors are supplied
with two polarizing posts installed and provisions
for installation of two jackscrew assemblies or two
coupling nut assemblies. (Replaces Mounting Style
B.) Plug
Socket Contacts Receptacle
Pin Contacts
Plug
Socket Contacts Receptacle
Pin Contacts
Plug
Socket Contacts
Plug
Socket Contacts
Receptacle
Pin Contacts
Receptacle
Pin Contacts
Receptacle
Pin Contacts
Ordered Separately
Ordered Separately
Supplied with Connector
Supplied with Connector
M83733/5
M83733/6
M83733/1
M83733/10
M83733/4
M83733/12
Jackscrew Assembly
305-0007-000 Coupling Nut Assembly
335-0002-000
Bushing MS247000-2
(Self-Locking
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-00019-000
Bushing MS247000-2
(Self-Locking
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-00019-000
Bushing MS247000-2
(Self-Locking
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-00019-000
Stylle C
Mounting style C is designed for cord-to-panel or
rack-to-panel applications. Connectors are supplied
with (4) MS24700-2 bushings on the receptacle
and 4 spring mount assemblies on the plug.
Style F
Mounting Style F is designed for rack-to-panel
pplications. Connectors are supplied with four
captive clinch nuts installed.
Style G "Z
Mounting style G is designed for rack-to-panel
applications. Connectors are supplied with four
.281(7.14) diameter holes which will accommodate
either four MS24700-2 bushings or four 231-0019-
000 spring mounts,
Style H
Mounting style H is designed for rack-to-panel
applications. Connectors are supplied with two
.281(7.14) diameter holes which are staggered.
Two spring mounts are on the plug end two
MS24700-2 bushings are on the receptacle.
Style K
Mounting style K is designed for rack-to-panel a
pplications. Connectors are supplied with four c
aptivated, non-rotating spring mounts on the plug.
DPK connectors are also available with polarizing
posts, accommodations for jackscrews, and cou-
pling nuts for cord-to-card and cord-to-panel appli-
cations. Another shelf style has two or four mount-
ing holes fitted with captive clinch nuts.
For mounting dimensions of the various mounting
styles shown here please refer to page 87.
www.ittcannon.com 85
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Style M
Mounting style M is designed for rack-to-panel
applications. Connectors are supplied with two .281
(7,14) diameter holes which are staggered and will
accommodate eight two MS24700-2 bushings or
two 231-0019-000 spring mounts.
Style X
Mounting sty~le X is designed for rack-to-panel
applications where positive alignment is required
before connectors are mated. Plug has two guide
pins and two spring mounts (MIL-STO-1533); re-
ceptacle has two guide sockets and two .197 (5.00)
dia. holes.
Style Y
Mounting style Y is identical to mounting style X,
Xcept the guide sockets are on the plug and the
guide pin and springs are on the receptacle.
Style Z
Mounting style Z is designed for use in rack-10
panel applications. Connectors are supplied with
two captive clinch nuts which are staggered.
MIL-C-83733/DPK Mounting Style
Plug
Socket Contacts Receptacle
Pin Contacts
Plug
Socket Contacts Receptacle
Pin Contacts
Ordered Separately
Supplied with Connector
M83733/9
M83733/3M83733/2
Plug
Socket Contacts Receptacle
Pin Contacts
Receptacle
Pin Contacts
MIL-C-83733
Connector Type DPK Mtg.
Style DPK Mtg.
Style
Mating MIL-C-83733
Connector
M83733/1 RECEPTACLE G K
X
X
G
C
F
K
K
Y
Y
H
H
H
M
H
Z
M83733/4
M83733/3
M83733/2
M83733/1
M83733/5
M83733/6
M83733/4
M83733/4
M83733/8
M83733/7
M83733/12
M83733/12
M83733/12
M83733/9
M83733/10
M83733/11
X
X
K
C
F
Y
Y
M
H
H
Z
M83733/2 PLUG
M83733/3 RECEPTACLE
M83733/4 PLUG
M83733/5 RECEPTACLE
M83733/6 RECEPTACLE
M83733/7 PLUG
M83733-08 RECEPTACLE
M83733/-09 RECEPTACLE*
M83733/-10 RECEPTACLE*
M83733/-11 RECEPTACLE*
M83733/2 RECEPTACLE
*Not recommended for G131 and G185 layouts.
M83733/8
M83733/11
M83733/7
Jackscrew Assembly
305-0007-000
Guide Pins
226-0348-000 Guide Sockets
226-0349-000
Coupling Nut Assembly
335-0002-000
Bushing MS247000-2
(Self-Locking
012-0515-000
Spring Mount Assembly
MIL-C-83733/17
231-00019-000
www.ittcannon.com 86
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Polarization (Mounting Style A only)
Contact Data
Standard Contacts
Coaxial/Shielded Contacts
Polarizing Post Alternate Positions
Pin inserts polarizing postitions are 180 opposite
socket insert polarizing positions. Shaded areas
indicate extended portion of the polarizing post.
Cord to panel DPK connectors are available in 35
alternate polarizing positions by changing indexing
of the polarizing posts. Keystone corners and hexa-
gonal posts provide this wide range of alternate
positions.
Face view of socket insert plug connector engaging
end.
N
V W
Y Z
X
Contact
Size
12 Pin
Skt.
030-9185-003
037-9186-003
030-9205-007
031-9206-006
030-9173-006
031-9174-004
030 -1975-008
031-1113-008
030-2042-000
031-1147-000
249-5500-012
249-5500-013
.122 (3.10)
.250 (6.35)
.122/250
RG-316 CCTC8 Outer
M22520/2-01
M22520/2-30 Cet-C8
Cet-C8
225-0085-00
(White)
CCTC9 Outer
M22520/2-01
M22520/2-30
500 VDC
500 VDC
RG-180/U
RG-179U
249-5500-010
249-5500-011
Pin
Socket
249-1825-001
249-1826-000
M39029/50-340
M39029/51-341
.081 (2.06)
.158 (4.01)
.M22520/5-01
Outer
M22520/2-01
Inner
.M22520/5-08
Outer
M22520/2-30
Inner
CIET - 12 225-0072-000
(Yellow)
M39029/4-113
M39029/5/118
MIL-I-81969/14-04 225-0072-000
(Yellow)
225-0071-000
(Blue)
225-0070-000
(Red)
225-1013-000
(Black)
MIL-I-81969/14-03
MIL-I-81969/14-11
MIL-I-81969/14-01
MIL-I-81969/14-01
M22520/1-01
with
M22520/1-02
Turret
M22520/2-01
with
M22520/2-02
Turret
M22520/2-01
with
M22520/2-23
Turret
M22520/2-01
with
M22520/2-06
(Socket)
Turret
M22520/2-09
(Pin)
Turret
M39029/4-111
M39029/5-116
M39029/4-110
M39029/5-115
M39039/11-144
M39029/12-148
M39029/58-360
M39029/57-354
Pin
Skt.
Pin
Skt.
Pin
Skt.
Pin
Skt.
16
20
22
22D
Cannon
Part Number
MIL-C-39029
Military
Part Number
Insertion/
Extraction
Tool
Grommet
Sealing Plug
Part Number
(Color)
Crimp
Tool
Type
TypeCoaxial
Coaxial
Contacts*
59W7
Arrangement
Only
Size 12
Contact
71C15
Layout
Only
*Pin shielded contacts utilized in receptacle connectors (71C15P inserts).
Socket shielded contacts utilized in plug connectors (71C15S inserts).
Plug coaxials go into plug connectors (59W7S inserts with socket contacts). Receptacle coaxials go into receptacle connectors ("P" inserts) with pin contacts (59W7P inserts with pin contacts).
Plug
Receptacle G
G
F
F
Plug
Receptacle
Prefix Cannon
Part Number Cable
Accom. DWV
Voltage
Min./Max.
O.D. Wire
Accom. Crimp
Tool
Ins./
Ext.
Tool
Grommet
Sealing Plug
Part Number
(Color)
TypeCoaxial Cannon
Part Number MIL-C-39029
Part Number Cable
Accom. Min./Max
Cable Dia. Crimp
Tool Locator
Ins./
Ext.
Tool
Grommet
Sealing Plug
Part Number
(Color)
www.ittcannon.com 87
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Contact Arrangements
DPKA
DPKB
Face View Pin Insert Shown
Layout
No. of Contacts
and Wire Size
Service Rating
18
18 #12
l
12345
67891011
12131415161718
123456
71
131
12345678910111213141516171825 24 21 2023 22
31 30 27 2629 28
G F C B AE D
19
3435 32333637383940414243444546474849505152
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
25 24 21 20
23 22
31 30 27 26
29 28
19
34
35
32
33
36
37
38
39
4041
42
43
44
45
4647
48
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
25 24 21 20
23 22
31 30 27 26
29 28 19
34
35 32
33
36
37
38
39
40
41
42
43
44
45
46
47
48
49505152535455565758596061626364
1
23
4
5
6
7
8
9
10
11
12
13
14 15
16
17
18
25
24 21 20
23 22 31 30
27 26
29 28 19
34
35 32
33
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
5253 54
55
56575859
60
6162
63
64
65
70 67686971 66
1
23
4
1
23
4
5
67
8
9
1011
12
13
1417 15
16
18
19 20
2122
23
24
2526
27
28
2930
31
32
3336 34
35
37
3839
61
6263
64
65
6667
68
69
7071
72
73
7477 75
76
78
7980 41 40
4243
44
45
4647
48
49
5051
52
53
5457 55
56
58
5960
82 81
8384
85
86
8788
89
90
9192
93
94
9598 96
97
99
100101
5
6
7
8
9
10
11
12
13
14 15
16
17
18
25
24 21 20
23 22 31 30
27 26
29 28 19
34
35 32
33
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
5253 54
55
56575859
60
6162
63
64
65
70 67686971 66
1
1
23
4
5
5
6
7
8
9
10
10
11
12
13
14
15
15
16
17
18
25
25
51
78
106
133
161 159 154 149 144 139 134
107
79
52
26
24 21 20
20
23 22
31 30 27 26
29 28 19
3435 32
33
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51525354 55
56
57
58
596061
62
63
64
65
70 67
68
69 7172737475767778 66
110
89
68
47
36
26
9
121
100
79
58
37
27
18
1
23456
789 11 101213141516
171819 22 21 202324252627
282930 32 313334353637
383940 43 42 414445464748
495051
891011
121314
19202122
2324
15
25262728
29303132
161718
64
64 #16
l
101
101 #20
l
G185
185 #22D
M
161*
161 #22
1000 VDC
48
30 #16 (1,2,10-15,22-29,35-48),
18#12 (3-9,16-21,30-34)
59W7
52 #20 (1-52)
7 Coax. (A-G)
#20: 1500 Coax: 1000
l & 500 VDC (Coax)
71
56#20 (1-4,11-30,36-60,65-71
15 #12 (5-10,31-56,61-64)
l
71C15
56 #20 (1-4,11-30,36-60,65-71)
15 Shielded #12 (5-10, 31-35,61-64)
#20: 1500: #12 Shielded: 500
1&500 VDC (Coax)
78
38 #20 (1-4,14-21,32-38,51-57,
68-78),40 #16 (5-13, 22-31,
40-50,58-67
l
The 59W7 Layout is sold less coaxial contacts, se page 86 for contact part numbers.
32
32 #16
l
51
51 #20
l
G131
131 #220
M
Layout
No. of Contacts
and Wire Size
Service Rating
Layout
No. of Contacts
and Wire Size
Service Rating
Layout
No. of Contacts
and Wire Size
Service Rating
Layout
No. of Contacts
and Wire Size
Service Rating
Layout
No. of Contacts
and Wire Size
Service Rating
*P0S-ALINE DESIGN
In the 161 contact arrangement, the entire pin contact is recessed in and individual cavity in
the plug connector. The socket contact is exposed and extends from the connector receptacle
face. (Pin insulator accepts socket contacts.)
www.ittcannon.com 88
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Panel Cutout Dimensions
Mounting Styles Figure 1.
Figure 2.
Figure 3.
PG, SG
PC, PF, SF,
SX, PX, SK
Mounting Styles
Mounting Styles
MIL-C-83733
Part No./
Mounting Style
DPK
Mounting
Styles
Figure
Ref. Shell
Size A
A
± .004(± 0.10) B
± .005(± 0.13) D
± .005(± 0.13) E1 2
E
Shell
Size B Shell
Size A Shell
Size B Shell
Size A Shell
Size B Shell
Size A Shell
Size B Shell
Size A Shell
Size B
SH, SM
PM, PH, P2
M83733/1/5/6
M83733/2
M83733/3
M83733/4
M8733/7
M83733/8
M83733/9/10/11
M83733/12
N/A
1
1
1
1
1
1
2
3
1
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
2.578
(65.48)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
3.875
(98.43)
2.103
(51.13)
2.103
(51.13)
2.103
(51.13)
2.167
(55.04)
2.167
(55.04)
2.167
(55.04)
2.167
(55.04)
2.095
(53.21)
2.103
(51.13)
3.400
(86.36)
3.465
(88.01)
3.465
(88.01)
3.465
(88.01)
3.465
(88.01)
3.465
(88.01)
3.465
(88.01)
3.400
(86.36)
3.465
(88.01)
1.022
(25.96)
1.022
(25.96)
1.022
(25.96)
1.095
(27.81)
1.095
(27.81)
1.095
(27.81)
1.095
(27.81)
1.095
(27.81)
1.022
(25.96)
1.022
(25.96)
1.095
(27.81)
1.095
(27.81)
1.095
(27.81)
1.095
(27.81)
1.095
(27.81)
1.022
(25.96)
1.095
(27.81)
1.095
(27.81)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.320 (8.13)
.315 (8.00)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.380 (9.65)
.370 (9.40)
-
-
.301 (7.65)
.294 (7.45)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.320 (8.13)
.315 (8.00)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.380 (9.65)
.370 (9.40)
-
-
.301 (7.65)
.294 (7.45)
.148 (3.76)
.144 (3.66)
.260 (6.60)
.250 (6.35)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.430 (10.92)
.420 (10.67)
.148 (3.76)
.144 (3.66)
-
-
.301 (7.65)
.294 (7.45)
.148 (3.76)
.144 (3.66)
.260 (6.60)
.250 (6.35)
.148 (3.76)
.144 (3.66)
.148 (3.76)
.144 (3.66)
.430 (10.92)
.420 (10.67)
.148 (3.76)
.144 (3.66)
-
-
.301 (7.65)
.294 (7.45)
PG, SG,
PC, PF,SF
SX
PX
SK
SY
PY
PM, PH
PZ
SH, SM
S*A, S*B,
P*A, P*B
SY,PY
S*A, S*B
P*A, P*B
A
A
A
B
B
B
D
E1
1
E
E
E
.562 ± .004
(14.28 ± 0.10)
.562 ± .004
(14.28 ± 0.10)
.562 ± .004
(14.28 ± 0.10)
1.095 ± .005
(27.81 ± 0.13)
1.095 ± .005
(27.81 ± 0.13)
.109 (2.77) MIN.
.109 MIN.
(2.77)
.060 ± .010 RAD.
(1.57 ± 0.25) TYP.
4 PLACES
.060 ± .010 RAD.
(1.57 ± 0.25) TYP.
4 PLACES
.060 ± .010 RAD.
(1.57 ± 0.25) TYP.
4 PLACES
.146 ± .002 (3.71 ± 0.05) DIA
THRU C'SUNK
100 ± 1 To .280 ± .005 (7.11 ± 0.13) DIA
2 PLACES
.146 ± .002 (3.71 ± 0.05) DIA
THRU C'SUNK
100 ± 1 To .280 ± .005 (7.11 ± 0.13) DIA
2 PLACES
www.ittcannon.com 90
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Assembly/Shielded Contacts
Assembly Instructions
Socket
249-1826-000/MIL-C-39029/51
Size 12/RG-179B/U Cable (used in 71C15 layout
249-1826-000/MIL-C-39029/50
Size 12/RG-179B/U Cable (used in 71C15 layout
FERRULE
FERRULE
.084 MIN. DIA.
(2.13)
BODY
BODY
INSULATOR
INSULATOR
INNER SKT CONTACT
INNER PIN CONTACT
FERRULE
.403 REF.
(10.24) INNER
CONTACT
Strip outer jacket to dimensions shown to expose outer conductor. Slip (or install) ferrule over outer conductor against cable jacket.
Exposed portion of the outer conductor must be combed out then
folded back over ferrule.
Trim cable to dimensions, as shown. (Ferrule must butt against
cable jacket).
Insert cable,ferrule and inner contact to rear of shell and crimp
into place with M22520/5-03 crimp tool.
Install inner contact against dielectric then crimp contact and center
conductor with a M22520/2-01 cimp tool using a M22520/2-30
locator.
DIELECTRIC
OUTER CONDUCTOR SHALL
NOT EXCEED THIS EDGE
.122 MIN. DIA.
(3.10)
.122 MIN. DIA.
(3.10)
Pin
Step 1. Step 2. Step 3.
Step 5.Step 4.
.148 ± .002 DIA.
(3.75 ± 0.05)
.148 ± .002 DIA.
(3.75 ± 0.05)
.046 ± .002
(1.16 ± 0.05)
.510 ± .010
(12.95 ± 0.25)
.118 ± .003
(3.00 ± 0.08) .094 ± .001
(2.38 ± 0.02)
.340 ± .010
(8.64 ± 0.25) .070 ± .010
(1.78 ± 0.25)
.151 MAX. DIA.
(3.84)
.616 ± .005
(15.64 ± 0.13)
.880 MAX.
(22.35)
.046 ± .002
(1.16 ± 0.50) .495 ± .005
(12.57 ± 0.13)
.160 ± .001
(4.06 ± 0.02) .187 ± .002 DIA.
(4.74 ± 0.05)
.187 ± .002 DIA.
(4.74 ± 0.05)
.756 MAX.
(19.20)
.084 ± .MIN. DIA.
(2.13)
www.ittcannon.com 91
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
MIL-C-83733 DPK
Coaxial Contact/Assembly
249-5500-010 Socket*
249-5500-011 PIN*
249-5500-012 Socket*
249-5500-013 PIN*
INSULATOR, BEAD CONTACT, PIN
BODY ASSEMBLY 1. These assembly instructions apply to 249-5500-010,
and 249-5500-011.
2. The following assembly tools are required:
a) CCT-C9 hex crimp tool
b) MS3198-Q W/L-3198-C1 contact crimp tool and
locator
c) 149 C(300 F) hot air gun (recommended): Regal
heat Gun No. 9A)
d) Blades, scissors, and picks
BODY ASSEMBLY
13/64 +_ 1/64
(5.16 +_ 0.40)
3/16 +_ 1/64
(4.76 +_ 0.40)
13/64 +_ 1/64
(5.16 +_ 0.40)
1/8 +_ 1/64
(3.18 +_ 0.40)
3/8 +_ 1/64
(9.52 +_ 0.40)
5/16 +_ 1/64
(7.94 +_ 0.40)
BODY INSERT
INSULATOR, BEAD
HEX CRIMP RING, OUTER
BODY ASSEMBLY
CENTER CONDUCTOR
MUST BE VISIBLE
IN INSEPECTION HOLE
8 INDENT CRIMP
CONTACT, PIN
OR SOCKET
BODY INSERT
INSULATOR, BEAD
HEX CRIMP
SLEEVE,
HEAT SHRINK
RING, OUTER
BODY ASSEMBLY
CENTER CONDUCTOR
MUST BE VISIBLE
IN INSEPECTION HOLE
8 INDENT CRIMP
CONTACT, PIN
OR SOCKET
CONTACT, SOCKET
BODY INSERT
RING, OUTER
STEP 1.
STEP 2.
STEP 3.
STEP 4.
STEP 1. STEP 5.
STEP 6.
STEP 7.
STEP 2.
STEP 3.
STEP 4.
STEP 5.
NOTES:
1. These assembly instructions apply to 249-5500-010,
and 249-5500-011.
2. The following assembly tools are required:
a) CCT-C9 hex crimp tool
b) M22520/2-01 contact crimp tool and locator
c) 149 C(300 F) hot air gun (recommended): Regal
heat Gun No. 9A)
d) Blades, scissors, and picks
NOTES:
STEP 6.
INSULATOR, BEAD
CONTACT, PIN BODY ASSEMBLY
BODY ASSEMBLY
BODY INSERT
RING, OUTER
SLEEVE
HEAT SHRINK
COAXIAL CABLE
RG-188/U
CONTACT, SOCKET
COAXIAL CABLE
RG-180/U OR RG-195/U
Slide outer ring over cable as shown (Figure 1). Slide body assembly over componenets and under shield until firmly
bottomed in place. Locate outer ring over shield and against body as
shown (Figure 3).
With cable and body assembly securely held together, hex crimp the
outer ring with tool CCT-C9 (Figure 3). Important: For optimum hex
crimp, firmly bottom the outer ring against the shoulder of the hex die
before compressing the handles.
Slide body assembly over componenets and under shield until firmly
bottomed in place. Locate outer ring over shield and against body as
shown (Figure 3).
With cable and body assembly securely held together, hex crimp the
outer ring with tool CCT-C9 (Figure 3). Important: For optimum hex
crimp, firmly bottom the outer ring against the shoulder of the hex die
before compressing the handles.
The final step is to shrink the heat sleeve in place with a hot air source
of 149 C to 327 C (300 F to 621 F) (Figure 3).
Strip cable as shown (Figure 1).
Install body insert, insulatro bed, and contact on cable as shown
(Figure 2.)
With body insert, insulator bead, and contact firmly in place, crimp the
contact with tool M22520/2-01 (setting number 3) and loacator
M22520/2-30 (Figure 2). Caution: The assembled componenets must
be tightly in place after crimping.
With body insert, insulator bead, and contact firmly in place, crimp the
contact with tool M22520/2-01, using setting number 3 and loacator
M22520/2-30 (Figure 2). Caution: The assembled componenets must
be tightly in place after crimping.
Slide heat-shrink sleeve and outer ring over cable as shown.
Strip cable as shown (Figure 1). Caution: Do not nick shield wires.
Install body insert, insulator bead, and contact on cable as shown.
*These contacts are used in the F59C7 layout.
*These contacts are used in the G59C7 layout.
