Large Sized Aluminum Electrolytic Capacitors . UNITED CHEMI-CON LXG Sadist 105C, 5,000 hours LIFE: KMH LX/LXA/LXG TXG SIZE: LX/LXA > LXG/TXG KMH TXG SERIES * 105C, 10,000 hours e Long life, specified with the rated ripple current applied. @ Non-solventproof type. @ LXG: 10~400V TXG: 10 ~ 250V CHARACTERISTICS Item Characteristics Operating temperature -40 ~ +105C for 10 ~ 100V range -25 to +105C for 200 ~ 400V (TXG is 250V or less.) Capacitance tolerance +20% (M} (at 20C, 120Hz) Leakage current 0.02CV (uA) or 3mA, whichever is smaller, after 5 minutes at 20C. tan 6 Rated voltage (V) 10 16 25 35 50 | 63~400 tan 0.60 | 0.45 | 0.30 | 0.25 | 0.20 0.15 (at 20C, 120Hz} Low temperature Capacitance at the rated minimum temperature and 120Hz shall not less than 70% of the 20C characteristics value. Impedance ratio at 120Hz shall not exceed the values given in the below table; Rated voitage (V) 10~16 25 35 50~63 80~100 | 200~400 Z at -25C/Z at +20C 4 3 3 2 2 4 Z at -40C/Z at +20C 15 10 8 6 5 - Impedance at 30KHz, The impedance shall not exceed the values in the table. 20C Load life with ripple After the capacitors are subjected to DC voltage with the rated ripple current applied at 105C current applied over the test time below, the following specifications shall be satisfied when the capacitors are restored to 20C. The sum of DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitor. LXG series; 5,000 hours TXG series; 10,000 hours Capacitance change <+25% of the initial measured value tan 6 < 250% of the initial specified value Leakage current S$ The initial specified value Shelf life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them at 105C for 500 hours without voltage applied. Capacitance change <+20% of the initial measured value tan d <= 150% of the initial specified value Leakage current < The initial specified value Others Satisfies characteristic W of JIS C 8141. DIMENSIONS (Type: VN) Unit (mm) 22 PC board pin-out PVC sleeve Note: * LXG No epoxy type TXG - Epoxy type Specifications subject to UNITED CHEMI-CON change without notice. (LXG/TXG) 71 Large Sized Aluminum Electrolytic Capacitors UNITED CHEMI-CON STANDARD RATINGS 10~400V 10-250V 10V 16V 25V 35V 50V 63V ate sae [espace] Rp 2172" capstan] PHC 2" capactance] PHC Cu" |capacance| PENCE copactace| MED cUe" |capcranc| Pp cure yr 108C, 120Hz pF 405C, 120Hz yF 105C, 120Hz HLF 105C, 120Hz pF 105C, 120Hz pF 105C, 120Hz 22x25 | 6,800 1.30 5,600 1.44 3,900 1.31 2,200 1.10 1,500 1.02 1,000 1.00 22x30 | 10,000 1.65 6,800 1.66 4,700 1.51 3,300 1.42 1,800 1.17 1,200 1.15 22x35 | 12,000 1.85 8,200 1.87 5,600 1.70 3,900 1.58 2,200 1.33 1,500 1.32 22x40 | 15,000 2.12 10,000 2.12 6,800 1.92 4,700 1.78 2,700 1.51 1,800 1.49 22x50 | 18,000 2.45 15,000 2.74 10,000 2.45 6,800 2.26 3,900 1.91 2,700 1.92 25.4x25 | 10,000 1.64 6,800 1.66 4,700 1.51 3,300 1.41 1,800 1.17 1,200 1.15 25.4x30 | 12,000 1.85 10,000 2.07 6,800 1.87 3,900 1.58 2,700 1.47 1,800 1.45 25.4x35 | 15,000 2.16 12,000 2.37 8,200 2.14 5,600 1.98 3,300 1.70 2,200 1.67 25.4x40 | 18,000 2.43 15,000 271 10,000 2.43 6,800 2.24 3,900 1.89 2,700 1.90 25.4x50 | 27,000 3.11 18,000 3.11 12,000 2.78 8,200 2.57 5,600 2.38 3,300 2.20 30x25 | 12,000 1.89 10,000 2.11 6,800 1.90 4,700 1.77 2,700 1.50 1,800 1.48 30x30 | 18,000 2.37 12,000 2.37 8,200 2.15 5,600 1.98 3,300 1,70 2,200 1.68 30x35 | 22,000 2.73 18,000 3.02 12,000 2.70 8,200 2.50 4,700 2.11 2,700 1.93 30x40 | 27,000 3.13 22,000 3.46 15,000 3.13 10,000 2.86 5,600 2.39 3,900 2.41 30x50 | 39,000 3.99 27,000 4.07 18,000 3.64 12,000 3.32 6,800 2.79 4,700 2.80 35x25 | 18,000 2.42 12,000 2.42 8,200 2.19 5,600 2.03 3,300 1.74 2,200 1.71 35x30 | 22,000 2.79 18,000 3.09 12,000 2.76 8,200 2.55 4,700 2.16 3,300 2.18 35x35 | 33,000 3.49 22,000 3.49 15,000 3.16 10,000 2.88 5,600 241 3,900 2.43 35x 40 | 39,000 3.96 27,000 4.04 18,000 3.61 12,000 3.30 6,800 2.78 4,700 2.78 35x50 | 47,000 4.62 39,000 5.16 27,000 4.70 18,000 4.29 10,000 3.57 6,800 3.55 80V 100V 200V 250V 350V LXG 400V LXG oe size, Capacitance Rippie current Cap Fipple current Capacitance Ripple current Capacitance Rippre current Capacitance! Fippie current Capacitance Fippre current pF 105C, 120Hz pF 105C, 120Hz pF 106C, 120Hz pF 108C, 120Hz wr 105C, 120Hz pe 108C, 120Hz 22x25| 680 0.97 390 0.78 180 0.63 150 0.57 68 0.39 58 0.39 22x30} 820 4.12 560 0.99 270 0.81 180 0.66 82 0.49 63 0.44 22x35 | 1,000 1.27 680 1.12 330 0.92 220 0.75 100 0.55 82 0.50 22x40] 1,200 1.42 820 1.26 390 1.02 270 0.85 120 0.63 129 0.57 22x50 | 1,800 1.84 1,200 1.60 470 1.47 390 1.08 180 0.73 159 0.67 25.4x 25 | 1,000 1.23 560 0.98 270 0.81 180 0.66 100 0.49 63 0.40 25.4x30| 1,200 1.39 820 1.23 330 0.92 270 0.83 120 0.55 109 0.50 25.4x36 | 1,500 1.62 1,000 1.41 470 1.18 330 0.96 150 0.60 129 0.58 25.4x40 | 1,800 1.82 1,200 1.59 560 1.28 390 1.07 180 0.72 150 0.66 25.4x50 | 2,200 2.11 1,500 1.86 680 1.48 470 1.22 220 0.93 229 0.84 30x25 | 1,200 1.41 820 1.25 330 0.94 270 0.85 120 0.56 100 0.51 30x30 | 1,800 1.78 1,000 1.42 470 1.15 330 0.96 180 0.71 159 0.65 30x35 | 2,200 2.05 1,200 1.61 560 1.30 470 4.19 220 0.82 189 0.74 30x40 | 2,700 2.36 1,500 1.87 680 1.49 560 1.35 270 0.94 229 0.84 30x50 | 3,300 2.75 2,200 2.40 1,000 1.91 680 1.58 330 1.19 279 1.10 35x25 | 1,800 1.82 1,000 1.45 470 4.22 330 7.02 150 0.69 120 0.61 35x30| 2,200 2.09 1,500 1.85 680 1.47 470 1.22 220 0.83 180 0.83 35x35 | 2,700 2.37 1,800 2.07 820 1.65 560 1.36 270 1.04 220 0.94 35x40 | 3,300 2.73 2,200 2.39 1,000 1.90 680 1.57 330 1.19 270 1.09 35x50 | 4,700 3.46 2,700 2.81 1,200 2.21 1,000 2.02 470 1.38 390 1.26 Note: These specifications are common for both LXG and TXG, except 350 and 400V are only applied to LXG. Specifications subject to change without notice. UNITED CHEMI-CON tu Large Sized Aluminum Electrolytic Capacitors UNITED CHEMI-CON MAX. IMPEDANCE = (mQ) at 20C, 30KHz Series LXG/TXG LXG Case size , Vv 10 ~ 63 80 ~ 100 200 ~ 250 350 ~ 400 22x25 120 150 640 800 22x30 100 120 560 700 22x35 80 95 450 560 22x40 70 80 400 500 22x50 50 60 320 330 25.4x25 90 110 530 660 25.4x30 70 85 420 520 25.4x35 60 70 360 440 25.4x40 50 60 310 380 25.4x50 40 45 240 300 30x25 70 80 400 500 30x30 50 60 320 400 30x35 40 50 260 3:20 30x40 35 40 240 230 30x50 25 30 180 220 35x25 65 70 340 420 35x30 45 50 260 320 35x35 38 40 210 260 35x40 30 30 180 220 35x50 23 25 140 170 RIPPLE CURRENT MULTIPLIERS LXG/TXG Frequency Multiplier: Frequency | conz | 120Hz | $00Hz | 1KHz | 10KHz| SOKHz Rated voltage 10~50V 0.95 1.00 1.03 1.05 1.08 1.08 63~100V 0.92 | 1.00 1.07 1.13 1.19 | 1.20 200~250V 0.81 1.00 1.17 1.32 1.45 1.50 350~400V_ _(LXG) 0.77 1.00 1.16 1.30 1.41 1.43 Temperature Multiplier: Ambient Temperature (C) 85 105 Factor 1.73 | 1.00 Note: When long fife performance is required in actual use, the rms ripple current has to be reduced. Specifications subject to change without notice. UNITED CHEMI-CON 73