1
Power entry modules without line filter KEC
https://www.schurter.com /PG05
Connectors
IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector
IEC connector C14 with fuse holder 1- or 2-pole
Screw-on mounting
from front side
Fuse drawer must be ordered separately (see
accessories).
IEC connector C14 with fuse holder 1- or 2-pole
with voltage selector
Snap-in mounting from front side
Fuse drawer must be ordered separately (see
accessories).
See below:
Approvals and Compliances
C14
70° C
Description
- Panel mount :
Screw-on version from front or rear side, snap-in version from front
side
- 3 Functions :
Appliance Inlet Protection class I , Fuseholder with interchangeable
fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm 1- or 2-pole , with
or without voltage selector (step switch)
- Meets the requirements of IEC 60335-1 for appliances in unattended
use. This includes the enhanced requirements of glow wire tests acc.
to IEC 60695-2-12 and -13.
- Quick connect terminals 4.8 x 0.8 mm
Characteristics
- Available with or without internal connections
- The fuse drawer "Fingergrip" can be removed by hand
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Fuse drawer with other voltage values
- For protection class II
- Variant with notch for V-Lock mating Cordsets
References
Alternative: version with line filter KFC
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 10 A / 250 VAC; 60 Hz
Dielectric Strength > 3 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 70 °C
IP-Protection from front side IP40 acc. to IEC 60529
Protection against electric
shock
Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect terminals 4.8 x 0.8 mm
Panel Thickness S Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm
Material: Housing Thermoplastic, black, UL 94V-0
Appliance inlet/-outlet C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
Fuseholder 1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 or 6.3 x 32 mm
Rated Power Acceptance @
Ta 23 °C
5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per
pole
6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole)
per pole
Power Acceptance @ Ta >
23°C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Voltage Selector optional, step, 2-4 digits
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
2
Power entry modules without line filter
KEC https://www.schurter.com /PG05
Connectors
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: KEC
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40046766
UL Approvals UL UL File Number: E93617
CCC Approvals CCC CCC Certificate Number: 2010010204409773
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles
Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1
3
Power entry modules without line filter KEC
https://www.schurter.com /PG05
Connectors
Dimensions [mm]
Screw-on mounting
40.7
50
30 55
4.8x0.8
R 4.5
R 6
R 3.1
41.1+_0.1
±0.15
58.3
18
27.7
27.3
ø 3.2
ø 6.3x90°
27.6 +_0.1
R 3 0
-0.2
50
230
2.25
2
M3/ø 3.6
Snap-in mounting
40.7
30
55
4.8x0.8
R 4.5
R 3.1
41.1
18
27.7
27.3 27.6
R 3 0
-0.2
43.5
230
2.25
2
S±0.1
+_0.1+_0.1
+_0.1
4
Power entry modules without line filter
KEC https://www.schurter.com /PG05
Connectors
Diagrams
without conn.
Voltage Selector
4-positions, 1-pole
4321
E
LN
A
without conn.
Voltage Selector
4-positions, 2-pole
43215
E
LN
AB
with internal connections
Voltage Selector
4-positions, 1-pole
4321
E
LN
with internal connections
Voltage Selector
4-positions, 2-pole
43215
E
LN
Voltage Selector
3 pos.
1-pole
321
Voltage Selector
3 pos.
2-pole
321 5
Voltage Selector
2 pos.
1-pole
31
Voltage Selector
2 pos.
2-pole
31 5
without voltage selector
1-pole
2
without voltage selector
2-pole
25
5
Power entry modules without line filter KEC
https://www.schurter.com /PG05
Connectors
Derating Curves
Fuses
5 x 20 mm (1-pole)
Admissible power acceptance in
Watt
1.5
1.0
0.5
0.0
2.5
2.0
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
Ambient air temperature Ta °C
Fuses
5 x 20 mm (2-pole, per pole)
Admissible power acceptance in
Watt per pole
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
2.0
1.5
1.0
0.5
0.0
Ambient air temperature Ta °C
Fuses
6.3 x 32 mm (1-pole)
Admissible power acceptance in
Watt
020406080100
1.5
1.0
0.5
0.0
2.5
3.15
2.0
I = << In
I = 0.7 In
I = 1.0 In
Ambient air temperature Ta °C
Fuses
6.3 x 32 mm (2-pole, per pole)
Admissible power acceptance in
Watt per pole
1.5
1.0
0.5
0.0
2.5
2.0
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
Ambient air temperature Ta °C
All Variants
Panel mounting Panel Thickness
s [mm]
Fuseholder Voltage Selector Internally wired V-Lock Order Number
Snap-in 1.5 1-pole - l 4303.0032
Snap-in 1.5 1-pole 3/4 digits l 4303.0092
Snap-in 1.5 1-pole 2 pos. l 4303.0212
Snap-in 2 1-pole - l 4303.0033
Snap-in 2 1-pole 3/4 digits l 4303.0093
Snap-in 2 1-pole 2 pos. l 4303.0213
Snap-in 2.5 1-pole - l 4303.0034
Snap-in 2.5 1-pole 3/4 digits l 4303.0094
Snap-in 2.5 1-pole 2 pos. l 4303.0214
Snap-in 1.5 1-pole - 4303.1032
Snap-in 1.5 1-pole 3/4 digits 4303.1092
Snap-in 1.5 1-pole 2 pos. 4303.1212
Snap-in 2 1-pole - 4303.1033
Snap-in 2 1-pole 3/4 digits 4303.1093
Snap-in 2 1-pole 2 pos. 4303.1213
Snap-in 2.5 1-pole - 4303.1034
Snap-in 2.5 1-pole 3/4 digits 4303.1094
Snap-in 2.5 1-pole 2 pos. 4303.1214
Snap-in 1.5 2-pole - l 4303.0002 █
Snap-in 1.5 2-pole 3/4 digits l 4303.0062
Snap-in 1.5 2-pole 2 pos. l 4303.0182
Snap-in 2 2-pole - l 4303.0003
6
Power entry modules without line filter
KEC https://www.schurter.com /PG05
Connectors
Panel mounting Panel Thickness
s [mm]
Fuseholder Voltage Selector Internally wired V-Lock Order Number
Snap-in 2 2-pole 3/4 digits l 4303.0063
Snap-in 2 2-pole 2 pos. l 4303.0183
Snap-in 2.5 2-pole - l 4303.0004
Snap-in 2.5 2-pole 3/4 digits l 4303.0064
Snap-in 2.5 2-pole 2 pos. l 4303.0184
Snap-in 1.5 2-pole - 4303.1002
Snap-in 1.5 2-pole 3/4 digits 4303.1062
Snap-in 1.5 2-pole 2 pos. 4303.1182
Snap-in 2 2-pole - 4303.1003
Snap-in 2 2-pole 3/4 digits 4303.1063
Snap-in 2 2-pole 2 pos. 4303.1183
Snap-in 2.5 2-pole - 4303.1004
Snap-in 2.5 2-pole 3/4 digits 4303.1064
Snap-in 2.5 2-pole 2 pos. 4303.1184
Screw - 1-pole - l 4303.0031 █
Screw - 1-pole 3/4 digits l 4303.0091
Screw - 1-pole 2 pos. l 4303.0211
Screw - 1-pole - 4303.1031
Screw - 1-pole 3/4 digits 4303.1091
Screw - 1-pole 2 pos. 4303.1211
Screw - 2-pole - l 4303.0001 █
Screw - 2-pole 3/4 digits l 4303.0061
Screw - 2-pole 2 pos. l 4303.0181
Screw - 2-pole - 4303.1001 █
Screw - 2-pole 3/4 digits 4303.1061
Screw - 2-pole 2 pos. 4303.1181
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit 50 Pcs
Required Accessory
Description
Fusedrawer 3
Fusedrawer for Fuse Links 5x20 mm resp. 6.3x32 mm
Fingergrip, 5 x 20, 2-pole, Voltage Selector 4303.2014.00
Fingergrip, 5 x 20, 2-pole, Voltage Selector, 100, 120, 220, 240 4303.2014.01
Fingergrip, 5 x 20, 2-pole, Voltage Selector, 110, 150, 220 4303.2014.02
Fingergrip, 5 x 20, 2-pole, Voltage Selector, 110, 220 4303.2014.03
...
7
Power entry modules without line filter KEC
https://www.schurter.com /PG05
Connectors
Accessories
Assorted Covers
Rear Cover
0859.0072
Cord retaining kits
Cord retaining strain relief
Flat head, A 4700.0001
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro-
tection class I 4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for
appliances with protection class I 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
Appliance Outlet further types to KEC
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13 4012
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4781
Connector further types to KEC ...
Mating Outlets/Connectors shuttered
Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783
Connector further types to KEC
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS
VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS
Power Cord further types to KEC
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
14.08.2020
