GENERAL PURPOSE -- SINGLE & DOUBLE POLE E Series Features 5 current ratings Choice of actuator styles 3 terminal types (optional screw terminals available -- consult factory) 3 contact arrangements Long-life coil spring mechanism High-temperature 150C and 200C available on select models (consult factory) Electrical Ratings Switch Series EN61058 Rating E13/E19 N/A E19A (mixed ratings) E14/E25 N/A E20 N/A E28/E29 N/A E30 N/A G13/G20 N/A N/A Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations) UL1054 Rating 15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC; 2A, 48 VDC (E13 Only)** 15A, 125/250VAC; 3/4HP, 125VAC; 1-1/2HP, 250VAC 0.1A, 125VAC 25A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC; 2A, 48VDC (E14 Only)** 20A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC 30.1A, 125/250/277VAC (UL Approved Only -- Resistive Load Only) 30.1A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC (UL Only) 0.1A, 125VAC 0.1A, 30VDC (G13 Only) N/A 6,000* N/A 6,000 N/A 6,000 N/A 6,000 N/A 6,000 N/A 6,000 N/A 6,000* *Indicates 100K life available. **100K Hi-temp not available Specifications Electrical Temperature Rating: Flammability Rating: 105C Std. (150C and 200C optional -- E13, E14, E19, E20, G13) 85C Std. (E28 and E29), 85C Std. (150C optional) E25 UL94HB Materials Case: Actuating Button: Common Terminals: NO and NC Terminals: Moving Blade: Spring: Auxiliary Actuators: Roller: Contacts: General Purpose Phenolic Thermoplastic Nylon Brass (E13, E19, E19A, G13, G20), Silver-Plated Brass (E14, E20), Silver-Plated Copper (E28, E29, E30) Brass (E13, E19, E19A, G13, G20) Copper (E14, E20, E28, E29, E30) Brass (E13, E19, E19A, G13, G20) Silver-Plated Beryllium Copper (E14, E20, E28, E29, E30) Stainless Steel Cold-Rolled Steel (Nickel-Plated) Sintered Stainless Steel Gold Crosspoint (G13, G20, E19A) Silver-Cadmium Oxide (E13, E14, E19, E19A, E20, E28, E29, E30) Silver Alloy (E19A, E29, E30) Dimensions -- Single Pole inches (mm) Actuators -- Single Pole Standard type integral hinged lever and roller actuators are available in choice of two mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown. "J" & "M" Type Optional Hardware -- Single Pole Actuator Specifications -- Single Pole -00E 425 0.050 (1.27) 0.2850.020 (7.240.51) 0.100 (2.54) 0.015 (0.38) -- Brass Hex Nut Brass Knurled Nut Brass Hex Nut (Nickel-Plated) 850 0.100 (2.54) 0.2480.026 (6.300.66) 0.050 (1.27) 0.015 (0.38) -- Brass Knurled Nut (Nickel-Plated) 0012-0026 E14/E29/E30 -00A E13/G13 425 0.050 (1.27) 0.6700.030 (17.020.76) 0.108 (2.74) 0.015 (0.38) -- Star Washer (Lockwasher) 0012-0073 850 0.100 (2.54) 0.6330.030 (16.080.76) 0.050 (1.27) 0.015 (0.38) -- 425 0.050 (1.27) 0.8120.030 (20.630.76) 0.218 (5.54) 0.015 (0.38) -- 850 0.100 (2.54) 0.7750.030 (19.690.76) 0.168 (4.27) 0.015 (0.38) -- 100 0.250 (6.35) 0.3120.062 (7.931.57) 0.187 (4.75) 0.093 (2.36) 1.500 (38.10) 285 0.312 (7.93) 0.4680.062 (11.891.57) 0.105 *** (2.67) 0.050 (1.27) 0.821 (20.85) 65 0.343 (8.71) 0.2810.062 (7.141.57) 0.187 (4.75) 0.140 (3.56) 1.750 (44.45) 170 0.525 (13.34) 0.4370.062 (11.101.57) 0.218 (5.54) 0.080 (2.03) 1.071 (27.20) 100 0.250 (6.35) 0.7180.062 (18.241.57) 0.187 (4.75) 0.093 (2.36) 1.391 (35.33) 285 0.348 (8.84) 0.8600.062 (21.841.57) 0.130 (3.30) 0.045 (1.14) 0.688 (17.47) 63 0.403 (10.24) 0.6870.062 (17.451.57) 0.187 (4.75) 0.093 (2.36) 1.625 (41.28) 211 0.483 (12.27) 0.8280.062 (21.031.57) 0.218 (5.54) 0.073 (1.85) 0.943 (23.95) Series/ Prefix Actuator Type E13/G13 Switch Type Maximum Maximum Operating Pre-Travel Force inches (g) (mm) -00J E14/E29/E30 E13/G13 -00M E14/E29/E30 E13/G13 -00H E14/E29/E30 E13/G13 -50H E14/E29/E30 E13/G13 -00K E14/E29/E30 E13/G13 -50K E14/E29/E30 Operating Point* inches (mm) Minimum Max. Movement Actuation Over-Travel Differential Length** inches inches inches (mm) (mm) (mm) * Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance 0.031 inches (0.79mm). E14, E29 and E30 actuators are shorter and formed up 11 at the button. *** E30 minimum over- travel is 0.150 (3.81). G13 and E30 have operating point tolerances of 0.30. Ordering Information Mounting -- Single Pole Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch you need. Recommended mounting screw: #6-32 round head. Recommended torque on screw: 6 inch lbs. max. Recommended maximum torque for ferrule: 20 inch pounds Specifications subject to change without notice. 0012-0023 0012-0025 0012-0028 Circuitry -- Single Pole Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. Example: E13-00E is double throw, E13-01E is normally open, and E13-02E is normally closed. Terminals -- Single Pole Standard 0.250 x 0.032 (6.35mm x 0.81mm) [Optional 0.187 x 0.032 (4.75mm x 0.81mm)] QC terminals can be furnished with angle formed up or down. Forms include straight 30, 45, 85 up or down. Other forms can be provided. 49 Dimensions -- Double Pole Actuators -- Double Pole inches (mm) Standard type integral hinged lever and roller actuators are available in choice of two mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown. "J" & "M" Type Optional Hardware -- Double Pole Actuator Specifications -- Double Pole Series/ Prefix E19/G20 Actuator Type Switch Type Maximum Maximum Operating Pretravel Force inches (g) (mm) -00A E20/E28 E19/G20 1280 --00J E20/E28 E19/G20 -00M -00H -50H 130 285 -00K E20/E28 E19/G20 205 425 E20/E28 E19/G20 850 1280 E20/E28 E19/G20 850 1280 E20/E28 E19/G20 850 212 425 -50K E20/E28 150 312 0.050 (1.27) 0.100 (2.54) 0.050 (1.27) 0.100 (2.54) 0.050 (1.27) 0.100 (2.54) 0.275 (6.99) 0.330 (8.38) 0.400 (10.16) 0.600 (15.24) 0.250 (6.35) 0.348 (8.84) 0.312 (7.92) 0.525 (13.34) Operating Point* inches (mm) 0.2850.030 (7.240.76) 0.2480.030 (6.300.76) 0.6700.030 (17.020.76) 0.6300.030 (16.000.76) 0.8120.030 (20.620.76) 0.7740.030 (19.660.76) 0.3120.062 (7.921.57) 0.4680.062 (11.891.57) 0.2810.062 (7.141.57) 0.4370.062 (11.101.57) 0.7180.062 (18.241.57) 0.8600.062 (21.841.57) 0.6870.062 (17.451.57) 0.8280.062 (21.031.57) Each Pole Minimum Max. Movement Actuation Overtravel Differential Length inches inches inches (mm) (mm) (mm) 0.080 (2.03) 0.050 (1.27) 0.080 (2.03) 0.050 (1.27) 0.218 (5.54) 0.188 (4.78) 0.187 (4.75) 0.156 (3.96) 0.187 (4.75) 0.156 (3.96) 0.187 (4.75) 0.156 (3.96) 0.187 (4.75) 0.146 (3.71) 0.015 (0.38) 0.015 (0.38) 0.015 (0.38) 0.015 (0.38) 0.015 (.038) 0.015 (0.38) 0.093 (2.36) 0.050 (1.27) 0.140 (3.56) 0.080 (2.03) 0.093 (2.36) 0.045 (1.14) 0.140 (3.56) 0.075 (1.91) -- -- Brass Knurled Nut (Nickel-Plated) 0012-0026 Star Washer (Lock Washer) 0012-0073 -- -- -- 1.500 (38.10) 0.821 (20.85) 1.750 (44.45) 1.071 (27.20) 1.391 (35.33) 0.688 (17.48) 1.625 (41.28) 0.943 (23.95) Contact factory for E25 specifications. Ordering Information Mounting -- Double Pole Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch you need. Note: Consult factory for part number when ordering E19A switches. Recommended mounting screw: #6-32 round head. Recommended torque on screw: 6 inch lbs. max. Recommended maximum torque for ferrule: 20 inch pounds. Specifications subject to change without notice. 0012-0023 0012-0025 0012-0028 -- * Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance .0.031 inches (0.79mm). E20 and E28 actuators are shorter and formed up 15 at the button. 50 Brass Hex Nut Brass Knurled Nut Brass Hex Nut (Nickel-Plated) Circuitry -- Double Pole Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. Example: E19-00A is double throw, E19-01A is normally open, and E19-02A is normally closed. Terminals -- Double Pole Standard 0.250 x 0.032 (6.35mm x 0.81mm) [Optional 0.187 x 0.032 (4.75mm x 0.81mm)] QC terminals can be furnished with angle formed up or down on common as well as open or closed terminal. Forms include straight 30, 45, 85 up or down. Other forms can be provided.