((
9EDNH?J;
mmm$L99B?J;$Yec '$.&&$+(($++*,lYYiWb[i6lYYb_j[$Yec
CONNECTOR STYLE RESISTOR TERMINATION WIRE SIZE WIRE COLOR WIRE LENGTH
CNX 410 Threaded w/Resistor
Use with Lens Assembly:
CMC 441 Standard 5mm or
CMS 442 Water Tight 5mm
012 120 OHM
018 180 OHM
033 330 OHM
056 560 OHM
120 1200 OHM
220 2200 OHM
X STRIPPED END
SINGLE ROW
E 02 2 POS
E 03 3 POS
STANDARD
4 24 AWG
1 WHT - BLK
2 RED - BLK
04 4 INCHES
06 6 INCHES
08 8 INCHES
12 12 INCHES
18 18 INCHES
24 24 INCHES
CNX 410 056 E02 4 1 12
EH:;H?D=9E:;I
IF;9?<?97J?EDI
C7J;H?7B Lens - Polycarbonate
Connector - Thermoplastic (U.L Listed Materials)
Moisture seal - EPDM
Lock washer - Steel, nickel plate
Terminals - Phosphor bronze, tin plate
Wire - U.L. 1007/1569, 24 AWG stranded
;B;9JH?97B Terminal - 3 amp continuous service. Mates to round, square,
rectangular leads .017˝ to .030˝.
CEKDJ?D= CMC 441 series lens - for dry applications.
CMS 442 series lens - for dust/wet conditions.
CMC 441 / CMS 442 lens - mounts through a 5/16˝ diameter panel
opening on 1/2˝ centers. Panel thickness up to 1/8˝.
Wire termination - stripped leads, VCC 450 series single or dual row
locking header connectors. Contact factory for other termination options.
J;IJ:7J7 Assembly meets NEMA 4 for water, ice and dust. Additional tests,
temperature cycle -40° to +85°C, shock to 6g’s, vibration to 2000hz,
solar & UV. Tests conducted by Consolidated Laboratories.
L;HI7J?B?JO
CONXRITE®interconnects with internal resistor make LED plug-in connections between panel and
power source easy. Options include broad selection of LEDs, choices of wire size, length and color,
variety of wire terminations.
8H?=>JD;II
CONXRITE®cable assemblies enhance LED viewing, 180°. Also for use with infrared and photo
detection devices. With selected LEDs, brightness can range from 20 to 20,000mcd.
7FFB?97J?ED
CONXRITE®assemblies have been tested for UV, solar, shock, vibration and temperature cycling.
Sealed version exceeds NEMA 4 for dust, water and ice.Assembly uses include office environments
or harsh exterior conditions. Provides ESD circuit protection.
?DIJ7BB7J?ED
CONXRITE®assembles are easy to install. Slip lens through panel opening, slide lock washer over
lens barrel, secure connector to lens by hand with a half turn.
;7IO?DIJ7BB7J?ED
Slide lens through 5/16˝ hole. Slip the lock washer onto lens barrel. While holding lens, twist
on connector one half turn until secure.
FH;#M?H;:IEB:;HB;IIB;:?DJ;H9EDD;9J
EKJB?D;:H7M?D=
CMC 441 Assembly
STANDARD
CMS 442 Assembly
WATER TIGHT
LOCK WASHER 5mm LED CNX 410
CONNECTOR ASSEMBLY
LENS ASSEMBLY SOLD SEPARATELY
H;I?IJEHI;B;9JEH
ADDITIONAL OPTIONS AVAILABLE
U.S. & Foreign Patents Issued and Pending