DS04-23118-3E
FUJITSU SEMICONDUCTOR
DATA SHEET
ASSP
Mobile Communication Systems
Piezoelectric SAW BPF
(700 to 1000 MHz)
F5CE Series (D2 type)
DESCRIPTION
The F5CE-D2 series of SAW bandpass filters apply to the frequency r ange 700 to 1000 MHz. These filters mak e
it possible to provide high stop-band attenuation and excellent pass-band flatness due to using unique DMS
(Double Mode SAW) technology as design method. Moreover, these filters are provided in small 3.0 mm sq.
package. This contribu tes to reduce weight and size of mobile communication units.
The F5CE-D2 ser ies of SAW filters are suitable for interstage RF filter in mobile communication systems in the
frequency ran ge 700 to 10 00 MHz. Standar d devices are a vailab l e for AMPS/CDMA/TDMA, GSM, PDC80 0 and
ISM900.
FEATURES
Excellent stop-band attenuation
Low insertion loss and low pass-band ripple
Ultra co mpact and light package (3.0 mm sq.)
External matching circuits are not required. (50 I/O)
Surface mount package (SMT)
Standard devices are available for mobile communication standards
(AMPS/CDMA/TDMA, GSM, PDC800 and ISM900)
PACKAGE
F5CE Series (D2 type)
2
PIN ASSIGNMENT
PIN DESCRIPTION
ABSOLUTE MAXIMUM RATINGS
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
Pin no. Pin name Description
1 GND Ground Pin
2 IN Input Pin
3 GND Ground Pin
4 GND Ground Pin
5OUTOutput Pin
6 GND Ground Pin
Parameter Symbol Rating Unit
Min. Max.
Operating temperature Ta 30 +85 °C
Storage temperature Tstg 40 +100 °C
Input power PIN +15 dBm
Input DC voltage −5+5V
6 5 4
12 3
(BOTTOM VIEW)
F5CE Series (D2 type)
3
RECOMMENDED OPERATING CONDITION
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
piezoelectric device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use piezoelectric devices within their recommended operating conditionranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
STANDARD DEVICES
Parameter Symbol Value Unit
Min. Max.
Operating temperature Ta 30 +85 °C
System Center
frequency
(MHz)
Band width
(MHz) Part
symbol Part number Remarks
PDC800 Tx 950.0 20 30 FAR-F5CE-950M00-D230
Rx 820.0 20 31 FAR-F5CE-820M00-D231
AMPS/CDMA/TDMA Tx 836.5 25 32 FAR-F5CE-836M50-D232
Rx 881.5 25 33 FAR-F5CE-881M50-D233
GSM Tx 902.5 25 34 FAR-F5CE-902M50-D234
Rx 947.5 25 35 FAR-F5CE-947M50-D235
EGSM Tx 897.5 35 41 FAR-F5CE-897M50-D241
Rx 942.5 35 63 FAR-F5CE-942M50-D263
ISM900 915.0 7 38 FAR-F5CE-915M00-D238
915.0 26 36 FAR-F5CE-915M00-D236
F5CE Series (D2 type)
4
ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
1. PDC800 (Tx)
Part number : FAR-F5CE-950M00-D230 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 940 to 960 MHz 2.6 3.0 dB
Pass-band ripple 940 to 960 MHz 0.7 1.2 dB
Absolute
stop-band
attenuation
DC to 680 MHz 50 66 dB
680 to 696 MHz 50 69 dB
810 to 830 MHz 50 66 dB
1015 to 1106 MHz 35 42 dB
1106 to 1700 MHz 50 59 dB
1700 to 2000 MHz 40 59 dB
Pass-band VSWR
(Return loss) 940 to 960 MHz
(9.5) 1.8
(10.9) 2.0
(dB)
3
2
1
S21 log MAG 10 dB/
CENTER 950 MHz SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz
CENTER 950 MHz SPAN 300 MHzCENTER 950 MHz SPAN 300 MHz
4
2 : 2.342 dB
960 MHz
3 : 68.839 dB
810 MHz
4 : 39.73 dB
1015 MHz
940 MHz
1 : 2.568 dB
3
2
1
S11 1 U FS
4
2 : 66.398
11.027
960 MHz
3 : 2.0508
57.342
810 MHz
4 : 12.441
84.324
1015 MHz
940 MHz
1 : 52.076 14.686 pF11.529
3
2
1
S11 SWR 1 /
2 : 1.4082
960 MHz
3 : 58.55
810 MHz
4 : 15.631
1015 MHz
940 MHz
1 : 1.2585
3
2
1
S22 1 U FS
4
2 : 64.738
8.7813
960 MHz
3 : 2.3711
56.83
810 MHz
4 : 18.398
84.547
1015 MHz
940 MHz
1 : 51.699 15.105 pF11.209
4
REF 0 dB
REF 1
F5CE Series (D2 type)
5
2. PDC800 (Rx)
Part number : FAR-F5CE-820M00-D231 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 810 to 830 MHz 2.5 3.0 dB
Pass-band ripple 810 to 830 MHz 0.7 1.2 dB
Absolute
stop-band
attenuation
DC to 760 MHz 50 65 dB
855 to 875 MHz 28 30 dB
875 to 920 MHz 35 38 dB
920 to 1200 MHz 45 60 dB
1200 to 2000 MHz 40 47 dB
Pass-band VSWR
(Return loss) 810 to 830 MHz
(9.5) 1.7
(11.7) 2.0
(dB)
3
2
S21 log MAG 10 dB/
CENTER 820 MHz SPAN 300 MHz CENTER 820 MHz SPAN 300 MHz
CENTER 820 MHz SPAN 300 MHzCENTER 820 MHz SPAN 300 MHz
4
2 : 2.109 dB
830 MHz
3 : 63.906 dB
760 MHz
4 : 31.312 dB
1015 MHz
810 MHz
1 : 2.451 dB
3
5
2
1
S11 1 U FS
4
2 : 67.109
5.3945
830 MHz
3 : 3.4922
49.041
780 MHz
4 : 17.785
127.42
855 MHz
5 : 15.277
100.98
875 MHz
810 MHz
1 : 41.9 79.439 pF0.4043
3
2
1
S11 SWR 1 /
2 : 1.3628
830 MHz
3 : 28.125
760 MHz
4 : 21.387
855 MHz
5 : 21.387
875 MHz
810 MHz
1 : 1.1981
3
2
1
S22 1 U FS
54
2 : 65.793
4.418
830 MHz
3 : 3.6797
43.031
760 MHz
4 : 18.219
120.1
855 MHz
5 : 15.129
93.582
875 MHz
810 MHz
1 : 37.752 47.32 pF4.1523
4 5
REF 0 dB
REF 1
1
F5CE Series (D2 type)
6
3. AMPS/CDMA/TDMA (Tx)
Part number : FAR-F5CE-836M50-D232 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 824 to 849 MHz 2.7 3.5 dB
Pass-band ripple 824 to 849 MHz 0.9 1.6 dB
Absolute
stop-band
attenuation
DC to 800 MHz 50 66 dB
869 to 1049 MHz 28 33 dB
1049 to 1200 MHz 50 60 dB
1200 to 2000 MHz 45 50 dB
Pass-band VSWR
(Return loss) 824 to 849 MHz
(9.5) 1.8
(10.9) 2.0
(dB)
3
2
1
S21 log MAG 10 dB/
CENTER 835 MHz SPAN 300 MHz CENTER 835 MHz SPAN 300 MHz
CENTER 835 MHz SPAN 300 MHzCENTER 835 MHz SPAN 300 MHz
4
2 : 2.7135 dB
849 MHz
3 : 60.88 dB
800 MHz
4 : 34.243 dB
869 MHz
824 MHz
1 : 2.643 dB
3
2
1
S11 1 U FS
4
2 : 84.996
12.77
849 MHz
3 : 2.0156
29.858
800 MHz
4 : 18.031
140.37
869 MHz
824 MHz
1 : 39.861 18.108 pF0.0938
3
2
1
S11 SWR 1 /
2 : 1.7589
849 MHz
3 : 33.646
800 MHz
4 : 34.335
869 MHz
824 MHz
1 : 1.2555
3
2
1
S22 1 U FS
4
2 : 84.547
10.078
849 MHz
3 : 2.1123
88.005
800 MHz
4 : 12.773
134.22
869 MHz
824 MHz
1 : 40.059 458.73 pF2.375
4
REF 0 dB
REF 1
F5CE Series (D2 type)
7
4. AMPS/CDMA/TDMA (Rx)
Part number : FAR-F5CE-881M50-D233 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 869 to 894 MHz 2.7 3.5 dB
Pass-band ripple 869 to 894 MHz 0.9 1.6 dB
Absolute
stop-band
attenuation
DC to 779 MHz 50 63 dB
779 to 849 MHz 45 50 dB
914 to 970 MHz 28 33 dB
970 to 1049 MHz 50 60 dB
1049 to 2000 MHz 40 50 dB
Pass-band VSWR
(Return loss) 869 to 894 MHz
(9.5) 1.7
(11.7) 2.0
(dB)
3
2
1
S21 log MAG 10 dB/
CENTER 880 MHz SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz
CENTER 880 MHz SPAN 300 MHzCENTER 880 MHz SPAN 300 MHz
4
2 : 2.7063 dB
894 MHz
3 : 62.398 dB
849 MHz
4 : 33.178 dB
914 MHz
869 MHz
1 : 2.6219 dB
3
2
1
S11 1 U FS
4
2 : 89.652
9.0273
894 MHz
3 : 2.2881
23.078
849 MHz
4 : 16.703
149.05
914 MHz
869 MHz
1 : 48.748 107.05 pF1.7109
3
2
1
S11 SWR 1 /
2 : 1.8203
894 MHz
3 : 26.584
849 MHz
4 : 31.784
914 MHz
869 MHz
1 : 1.0512
3
2
1
S22 1 U FS
4
2 : 88.297
7.6133
894 MHz
3 : 2..3965
21.153
849 MHz
4 : 14.922
139.78
914 MHz
869 MHz
1 : 48.572 277.43 pF660.16 m
4
REF 0 dB
REF 1
F5CE Series (D2 type)
8
5. GSM (Tx)
Part number : FAR-F5CE-902M50-D234 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 890 to 915 MHz 2.8 3.3 dB
Pass-band ripple 890 to 915 MHz 0.8 1.4 dB
Absolute
stop-band
attenuation
DC to 845 MHz 50 60 dB
845 to 870 MHz 45 50 dB
925 to 935 MHz 5 18 dB
935 to 980 MHz 28 33 dB
980 to 1200 MHz 50 60 dB
1200 to 3000 MHz 30 40 dB
Pass-band VSWR
(Return loss) 890 to 915 MHz
(9.0) 1.7
(11.7) 2.1
(dB)
2
1
S21 log MAG 10 dB/
CENTER 900 MHz SPAN 300 MHz CENTER 900 MHz SPAN 300 MHz
CENTER 900 MHz SPAN 300 MHz
CENTER 900 MHz SPAN 300 MHz
5
2 : 2.512 dB
915 MHz
3 : 60.125 dB
869 MHz
4 : 32.472 dB
935 MHz
5 : 63.11 dB
980 MHz
890 MHz
1 : 2.705 dB
35
S11 1 U FS
4
2 : 73.234
8.75
915 MHz
3 : 2.377
21.645
869 MHz
4 : 16.141
154.23
935 MHz
5 : 9.9835
71.762
980 MHz
890 MHz
1 : 54.355 54.499 pF3.2813
3
2
1
S11 SWR 1 /
2 : 1.5029
915 MHz
3 : 25.029
869 MHz
4 : 32.898
935 MHz
5 : 15.535
980 MHz
890 MHz
1 : 1.1118
5
3
S22 1 U FS
2 : 72.748
8.6719
915 MHz
3 : 2.3945
20.338
869 MHz
4 : 14.781
143.07
935 MHz
5 : 9.7883
88.281
980 MHz
890 MHz
1 : 54.16 74.925 pF2.3867
4 5
REF 0 dB
REF 1
32
1
2
1
4
4
F5CE Series (D2 type)
9
6. GSM (Rx)
Part number : FAR-F5CE-947M50-D235 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 935 to 960 MHz 2.7 3.3 dB
Pass-band ripple 935 to 960 MHz 0.7 1.4 dB
Absolute
stop-band
attenuation
DC to 871 MHz 50 66 dB
890 to 915 MHz 30 40 dB
980 to 1025 MHz 25 34 dB
1025 to 2000 MHz 45 48 dB
2000 to 3000 MHz 30 33 dB
Pass-band VSWR
(Return loss) 935 to 960 MHz
(9.0) 1.9
(10.2) 2.1
(dB)
3
2
1
S21 log MAG 10 dB/
CENTER 950 MHz SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz
CENTER 950 MHz SPAN 300 MHzCENTER 950 MHz SPAN 300 MHz
4
5
2 : 2.811 dB
960 MHz
3 : 43.265 dB
915 MHz
4 : 31.174 dB
980 MHz
5 : 62.902 dB
1025 MHz
935 MHz
1 : 2.838 dB
3
2
1
S11 1 U FS
4
5
2 : 87.012
15.473
960 MHz
3 : 3.3154
11.977
915 MHz
4 : 12.32
135.31
980 MHz
5 : 8.1797
65.523
1025 MHz
935 MHz
1 : 48.096 14.898 pF11.426
3
2
1
S11 SWR 1 /
2 : 1.8212
960 MHz
3 : 16.035
915 MHz
4 : 33.99
980 MHz
5 : 16.709
1025 MHz
935 MHz
1 : 1.2585
3
2
1
S22 1 U FS
4
5
2 : 86.348
15.438
960 MHz
3 : 3.269
11.102
915 MHz
4 : 12.32
133.48
980 MHz
5 : 8.2369
63.543
1025 MHz
935 MHz
1 : 46.922 15.199 pF11.199
4 5
REF 0 dB
REF 1
F5CE Series (D2 type)
10
7. EGSM (Tx)
Part number : FAR-F5CE-897M50-D241 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 880 to 915 MHz 3.6 4.5 dB
Pass-band ripple 880 to 915 MHz 1.8 2.7 dB
Absolute
stop-band
attenuation
DC to 845 MHz 50 55 dB
925 to 980 MHz 10 14 dB
980 to 1200 MHz 40 54 dB
1200 to 2100 MHz 35 50 dB
2100 to 3000 MHz 25 32 dB
Pass-band VSWR
(Return loss) 880 to 915 MHz
(5.6) 2.7
(6.8) 3.2
(dB)
2
1.7184 nF
S21 log MAG 10 dB/ REF 0 dB
START 750 MHz STOP 1050 MHz
START 750 MHz STOP 1050 MHz
1 : 2.0064 dB
894.75 MHz
679.65 pF
894.75 MHz
CH1Markers
2 : 32.453
14.004
880 MHz
3 : 55.285
7.3574
915 MHz
4 : 444.31
235.81
925 MHz
5 : 7.3086
66.512
980 MHz
S11 SWR 1 / REF 1
START 750 MHz STOP 1050 MHz
START 750 MHz STOP 1050 MHz
1 : 1.1199
894.75 MHz
3
23
894.75 MHz
2 : 30.457
11.510
880 MHz
3 : 55.008
9.2461
915 MHz
4 : 336.78
274.64
925 MHz
5 : 7.3398
65.723
980 MHz
2 : 3.6341 dB
880 MHz
3 : 2.7867 dB
915 MHz
4 : 14.206 dB
925 MHz
5 : 51.327 dB
980 MHz
2 : 1.7780
880 MHz
3 : 1.2217
915 MHz
4 : 11.646
925 MHz
5 : 18.674
980 MHz
1
1
45
23
CH1Markers
5
4
1
4
5
1
2
4
3
5
S11 1U FS 1 : 55.994 Ω−103.52 m
S22 1U FS 1 : 55.930 Ω−261.72 m
F5CE Series (D2 type)
11
8. EGSM (Rx)
Part number : FAR-F5CE-942M50-D263 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 925 to 960 MHz 3.1 4.2 dB Ta = 30 °C to +85 °C
3.1 3.5 dB Ta = +15 °C to +35 °C
Pass-band ripple 925 to 960 MHz 1.2 2.0 dB
Absolute
stop-band
attenuation
DC to 871 MHz 50 62 dB
890 to 915 MHz 15 23 dB
980 to 1025 MHz 23 32 dB
1025 to 2000 MHz 40 45 dB
2000 to 3000 MHz 20 33 dB
Pass-band VSWR
(Return loss) 925 to 960 MHz
(6.0) 1.7
(11.7) 3.0
(dB)
2
S11 1U FS 1 : 34.121 Ω−3.5723
S21 log MAG 10 dB/ REF 0 dB
CENTER 950 MHz SPAN 300 MHz
CENTER 950 MHz SPAN 300 MHz
1 : 3.1142 dB
925 MHz
S22 1U FS 1 : 35.443 Ω−6.9688 24.69 pF
925 MHz
2 : 54.803
9.3535
960 MHz
3 : 5.3423
2.3633
915 MHz
4 : 9.4063
108.32
980 MHz
S11 SWR 1 / REF 1
CENTER 950 MHz SPAN 300 MHz
CENTER 950 MHz SPAN 300 MHz
1 : 1.4805
925 MHz
3
2
3
1
2
3
4
48.165 pF
925 MHz
2 : 57.764
7.1191
960 MHz
3 : 5.1411
3.1877
915 MHz
4 : 9.2109
107.8
980 MHz
2 : 2.8163 dB
960 MHz
3 : 35.658 dB
915 MHz
4 : 31.673 dB
980 MHz
2 : 1.2177
960 MHz
3 : 9.8255
915 MHz
4 : 30.797
980 MHz
4
1
1
4
1
4
2
3
F5CE Series (D2 type)
12
9. ISM900 (7 MHz Bandwidth)
Part number : FAR-F5CE-915M00-D238 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 911.5 to 918.5 MHz 3.2 3.5 dB
Pass-band ripple 911.5 to 918.5 MHz 0.3 1.0 dB
Absolute
stop-band
attenuation
DC to 600 MHz 50 66 dB
600 to 840 MHz 40 35 dB
869 to 894 MHz 35 40 dB
970 to 1500 MHz 40 45 dB
1500 to 3000 MHz 25 28 dB
Pass-band VSWR
(Return loss) 911.5 to 918.5 MHz
(9.5) 1.8
(10.9) 2.0
(dB)
2
1
S21 log MAG 10 dB/
CENTER 915 MHz SPAN 300 MHz CENTER 915 MHz SPAN 300 MHz
CENTER 915 MHz SPAN 300 MHzCENTER 915 MHz SPAN 300 MHz
2 : 3.011 dB
920.5 MHz
912.5 MHz
1 : 3.133 dB S11 1 U FS
2 : 77.844
11
920.5 MHz
912.5 MHz
1 : 50.824 2.2248 pF12.756
2
1
S11 SWR 1 /
2 : 1.6094
920.5 MHz
912.5 MHz
1 : 1.2879 S22 1 U FS
2 : 74.648
11.52
920.5 MHz
912.5 MHz
1 : 50.184 2.4377 pF13.977
REF 0 dB
REF 1
1
2
1
2
F5CE Series (D2 type)
13
10. ISM900 (26 MHz Bandwidth)
Part number : FAR-F5CE-915M00-D236 (Ta = 30 °C to +85 °C)
Parameter Conditions Value Unit Remarks
Min. Typ. Max.
Insertion loss 902 to 928 MHz 2.6 3.5 dB
Pass-band ripple 902 to 928 MHz 0.9 2.0 dB
Absolute
stop-band
attenuation
DC to 800 MHz 50 70 dB
800 to 880 MHz 45 57 dB
950 to 1080 MHz 28 31 dB
1080 to 2000 MHz 45 60 dB
2000 to 3000 MHz 25 38 dB
Pass-band VSWR
(Return loss) 902 to 928 MHz
(8.1) 1.7
(11.7) 2.3
(dB)
2
S11 1U FS 1 : 42.717 Ω−1.4512
S21 log MAG 10 dB/ REF 0 dB
CENTER 915 MHz SPAN 300 MHz
CENTER 915 MHz SPAN 300 MHz
1 : 2.4997 dB
902 MHz
S22 1U FS 1 : 42.037 Ω−2.6191 67.368 pF
902 MHz
2 : 85.066
10.973
928 MHz
3 : 2.3496
28.755
880 MHz
4 : 12.492
132.72
950 MHz
S11 SWR 1 / REF 1
CENTER 915 MHz SPAN 300 MHz
CENTER 915 MHz SPAN 300 MHz
1 : 1.2013
902 MHz
3
2
3
1
2
3
4
121.59 pF
902 MHz
2 : 85.512
8.3164
928 MHz
3 : 2.4141
28.497
880 MHz
4 : 12.734
135.52
950 MHz
2 : 2.5671 dB
928 MHz
3 : 61.414 dB
880 MHz
4 : 33.762 dB
950 MHz
2 : 1.7442
928 MHz
3 : 28.381
880 MHz
4 : 32.443
950 MHz
4
1
1
4
1
4
2
3
F5CE Series (D2 type)
14
MEASURING CIRCUIT
PART NUMBER DESIGNATION
MARKING
2
6431
5
1 to 6 : Pin numbers
[Designation example]
(1) Frequency designation : Specify the nominal frequency in six alphanumeric characters.
Enter M (for MHz) at the decimal point.
Refer to "STANDARD DEVICES".
[Example] 836.5 MHz 836M50
(2) Serial number : Specify a characters from 01 to 99.
Refer to "STANDARD DEVICES".
(3) Packing (Reeled tape) : Y : 1 k pcs/reel
X : 5 k pcs/reel
FAR–F5CE– –D2
(1) (2) (3)
M
INDEX
LOGO
DATE CODE
PART SYMBOL
LOT No.
F5CE Series (D2 type)
15
PACKAGE DIMENSION
3.0
3.0
1.2 Max.
0.750.75
4R 0.3
1.2
0.6
1.5
1.2
2R 0.2
0.4
6 5 4
12 3
Dimensions in mm.
F5CE Series (D2 type)
16
RECOMMENDED LAND PATTERN
3.0
0.70
3.0
0.751.5
0.2 0.75 0.95
1.20 1.20
1.5
Dimensions in mm.
F5CE Series (D2 type)
17
PACKING
1. Reel Dimensions
2. Pack ing Style
1.5 Min.
φ12.8 Min.
φ20.2 Min.
R0.58
9.5 ± 0.5
φ80
φ250
13.8 Max.
Type Volume
Y1 k pcs
X5 k pcs
Dimensions in mm.
1PIN
Pulling side
Reel side Pulling side
F5CE Series (D2 type)
18
3. Tape Dimensions
4. Peel strength of top cover tape
4.0 ± 0.1
2.0 ± 0.05
3.5 ± 0.05
3.3 ± 0.1
φ1.5 ±
0.1
0.0
φ1.0 Min.
0.3 ± 0.05
8.0 ± 0.2
4.0 ± 0.1
1.75 ± 0.1
1.3 ± 0.1
3.3 ± 0.1
Dimensions in mm.
165 ° to 180 °
Direction of pulling Speed 300 mm/min
Embossment carrier type tape
Peel off by the force of 0.1 N to 1.0 N under the condition at the right.
(Conforms to EIA)
F5CE Series (D2 type)
19
RECOMMENDED REFLOW PROFILE
NOTE
A mass-produced product order is accepted by a unit of 1000.
240
210
150 Pre-Heating
10 s
60 s
60 s 90 s
Time (s)
Temperature (°C)
Heating rate
1 °C/s to 4 °C/s
Air cooling
F5CE Series (D2 type)
FUJITSU LIMITED
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The products described in this document are designed, developed
and manufactured as contemplated for general use, including
without limitation, ordinary industrial use, general office use,
personal use, and household use, but are not designed, developed
and manufactured as contemplated (1) for use accompanying fatal
risks or dangers that, unless extremely high safety is secured, could
have a serious effect to the public, and could lead directly to death,
personal injury, severe physical damage or other loss (i.e., nuclear
reaction control in nuclear facility, aircraft flight control, air traffic
control, mass transport control, medical life support system, missile
launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial
satellite).
Please note that Fujitsu will not be liable against you and/or any
third party for any claims or damages arising in connection with
above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You
must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Law of Japan, the prior
authorization by Japanese government will be required for export
of those products from Japan.
F0107
FUJITSU LIMITED Printed in Japan