ALUMINUM ELECTROLYTIC CAPACITORS RY 12.5mmL Wide Temperature Range series 12.5mmL height. Compliant to the RoHS directive (2011/65/EU). RY High Temperature RU Specifications Item Performance Characteristics Category Temperature Range -55 to +105C (6.3 to 100V), -40 to +105C (160 to 400V), -25 to +105C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 6.8 to 4700F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03CV or4 (A), whichever is greater. 160 to 450 After 1 minute's application of rated voltage at 20C, I = 0.04CV+100 (A) or less After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Rated voltage (V) Tangent of loss angle (tan ) 10 0.24 6.3 0.28 tan (MAX.) 16 0.20 25 0.16 Measurement frequency : 120Hz at 20C 35 0.14 50 0.12 63 0.10 100 0.08 160 to 350 400 to 450 0.20 0.25 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z- 25C / Z+20C ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 6.3 5 10 10 4 8 16 3 6 35 to 50 63 to 100 160 to 200 250 to 350 2 3 4 2 3 4 8 3 25 2 4 400 6 10 450 15 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Capacitance change tan Leakage current Type numbering system (Example : 10V 2200F) d Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 Configuration P0.5 D+0.5 MAX URY 1 A 2 2 2 MHD Capacitance tolerance (20%) Rated capacitance (2200F) Pressure relief vent Rated voltage (10V) L+ MAX 15MIN Series name 4MIN Type (mm) ( D < 20) 1.5 ( D 20) 2.0 Configuration Pb-free leadwire Pb-free PET sleeve D 12.5 16 18 20 22 25 D P 5.0 7.5 7.5 10.0 10.0 12.5 d 12.5 to 18 HD 0.6 0.8 0.8 1.0 1.0 1.0 20 to 25 RD * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS RY series Dimensions 6.3 0J V Cap.(F) 330 470 680 1000 2200 3300 4700 Code 331 471 681 102 222 332 472 12.5 x 12.5 18 x 12.5 25 x 12.5 10 22 33 47 68 100 220 330 470 Code 100 220 330 470 680 101 221 331 471 12.5 x 12.5 18 x 12.5 22 x 12.5 Code 6.8 10 22 33 6R8 100 220 330 16 x 12.5 18 x 12.5 25 x 12.5 18 x 12.5 22 x 12.5 16 1C 820 1030 12.5 x 12.5 25 x 12.5 400 550 610 12.5 x 12.5 22 x 12.5 16 x 12.5 20 x 12.5 25 x 12.5 520 1000 12.5 x 12.5 18 x 12.5 25 x 12.5 160 2C 230 400 400 2G 75 90 140 25 1E 65 150 200 35 1V 500 770 12.5 x 12.5 18 x 12.5 22 x 12.5 420 610 810 50 1H 12.5 x 12.5 20 x 12.5 25 x 12.5 200 2D 12.5 x 12.5 16 x 12.5 20 x 12.5 25 x 12.5 130 210 280 360 450 2W 12.5 x 12.5 16 x 12.5 25 x 12.5 38 47 85 12.5 x 12.5 16 x 12.5 18 x 12.5 25 x 12.5 450 540 700 1170 Case size 100 2A 350 2V V Cap.(F) 580 730 1200 63 1J V Cap.(F) 10 1A 250 2E 110 170 230 310 16 x 12.5 18 x 12.5 22 x 12.5 130 170 190 D x L (mm) Rated ripple 315 2F 12.5 x 12.5 16 x 12.5 20 x 12.5 25 x 12.5 70 85 120 160 Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(F) Frequency 100 to 680 1000 to 4700 6.8 to 100 50Hz 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 300Hz 1.23 1.10 1.25 1 kHz 1.34 1.13 1.40 10kHz or more 1.50 1.15 1.60 CAT.8100D