WSN802G E-Series Wi-Fi Radio Module
Enterprise Security Features
2.4 GHz Low Power Wi-Fi Radio Module
Overview
The WSN802G E-Series are a low cost pre-certified WiFi 2.4 GHz radio transceiver modules with
a comprehensive set of enterprise security features that enables the radio modules to be used
easily in applications which require enterprise security when interfacing to corporate Wi-Fi
networks, enabling robust encryption, authentication and security protection. The WSN802 E-
series radio modules interface seamlessly to existing Wi-Fi 802.11 b/g/n network infrastructure.
The WSN802G E-series modules are ideal for applications that enable devices, machines and
other systems to connect directly to the internet for a broad range of machine to machine
(M2M) applications including medical, industrial controls, commercial automation and many
others areas where enterprise secured Wi-Fi is a must.
With Wi-Fi to serial transmission, any unformatted data is transparently sent via the serial
interface over the Wi-Fi network to a fixed IP address / port and vice versa, without the need for
any additional formatting. The full TCP/IP stack on the module places less burden on the host
applications and simplifies the design and development cycle
The WSN802G E-Series radio modules implements IEEE 802.1x features:
•Integration with RADIUS Authentication Server to allow administration, auditing and logging
and allowing for centralized management of user credentials
•Uses an Extensible Authentication Protocol (EAP)
•Certificate Authentication - blocks hackers trying to infiltrate corporate networks
•Differing Encryption key in every packet offers robust security
•Includes Full TCP / IP stack on the module
OTHER FEATURES INCLUDE:
•Data rates from 1Mbs to 11Mbs
•WPA2
•Transparent Serial to Wi-Fi transmission
•TCP client/server support
•Ad Hoc and Infrastructure modes
•UART interface
•FCC, ETS and Canadian IC Certified
HOW TO BUY
Murata products are sold through a world-wide network of manufacturer’s reps and
distributors. Go to the Murata website at www.Murata.com and visit the “How to Buy”
section to locate a sales / distribution partner near you.
Part Number Description
WSN802GP-E Wi-Fi Module - Pinned Version
WSN802GPA-E Wi-Fi Module - Pinned Version, Chip Antenna
WSN802GC-E Wi-Fi Module – Surface Mount Version
WSN802GCA-E Wi-Fi Module – Surface Mount Version, Chip Antenna
WSN802GADK, WSN802GADK-A Developer’s Kit, chip antenna, option with pre-configured AP
WSN802GDK, WSN802GDK-A Developer's Kit, option with pre-Configured access point
For more information visit www.Murata.com
SPECIFICATION
Radio Characteristics: IEEE 802.11b/g
Frequency: 2.4 – 2.474 GHz
Transmit Power: 10 mW
RF Data Rates: 1,2,5.5, 11 Mbps
Receiver Sensitivity: -92 dBm at 1 Mbps; -81 dBm at 11 Mbps
Data Encryption: AES-128
Enterprise Security EAP-TLS, EAP-TTLS, EAP-FAST, EAP-PEAP, MSCHAP, GTC
Network: UDP, DHCP, DNS, ARP, TCP, SNMP
Environmental: -40 oC to +85 oC , 10 - 90% humidity, non-condensing
Power Supply: 3.3 to 5 VDC
Dimensions: 1.05 x 1.04 inches (2.67 x 2.50 mm) for WSN802GC
1.05 x 1.10 inches (2.67 x 2.89 mm) for WSN802GP
Pinned and Surface Mount Versions
RF Connection: U.FL Coaxial Connector, Chip Antenna
Interface: UART
Certification: FCC, Canadian IC and ETSI certified
4441 Sigma Road, Dallas, TX 75244 USA
