In This Section…
Overview.............................................................................F-2–F-3
Ring Terminals
Nylon-Insulated Ring .....................................................F-4–F-6
Vinyl-Insulated Ring.......................................................F-7–F-8
Non-Insulated Ring........................................................F-8–F-9
Heavy-Duty Ring .................................................................F-10
High-Temperature Non-Insulated Ring ................................F-11
Tefzel®Insulated Ring .........................................................F-11
Nylon-Insulated Rectangular Rings......................................F-12
Non-Insulated Rectangular Rings ........................................F-12
Non-Insulated Flag Terminals ...................................................F-13
Fork and Locking Fork Terminals
Nylon-Insulated Fork...........................................................F-14
Vinyl-Insulated Fork...................................................F-15–F-17
Non-Insulated Fork....................................................F-17–F-18
Pin Terminals............................................................................F-18
Splice Connectors ..............................................................F19–F20
Wire Joints ...............................................................................F-21
Heat-Shrinkable Terminals, Splices and Disconnects.......F-22–F-23
Disconnects and Male Tabs
Female (250 Series) ..................................................F-24–F-25
Piggy Back (250 Series)......................................................F-25
Female (187 Series)............................................................F-25
Male Tabs (250 and 187 Series)..........................................F-26
250 Series — Adapters and Coupler...................................F-27
Male (110 Series Disconnects)............................................F-27
Wristlock Disconnects.........................................................F-27
Plastic Strip Terminals.........................................................F-28
Luminaire Disconnects........................................................F-29
Disconnect Installation Tool.................................................F-29
Insulated Ferrules ...........................................................F-30–F-31
Non-Insulated Ferrules .............................................................F-32
Installing Kits............................................................................F-33
Application Tools
Plier Type Tools ...................................................................F-34
Comfort Crimp®Terminal Tools............................................F-35
Ratchet Hand Tools .............................................................F-36
Flag Terminal Type Hand Tool..............................................F-36
Wire Stripping/Cutting Tools ................................................F-37
Toggle Type Tools................................................................F-37
Shure-Stake®Auto-Feed Tool..............................................F-38
Tooling for Plastic Strip Terminals .......................................F-38
Battery-Powered Crimping Tool...........................................F-39
Bench-Mounted Air Tools ....................................................F-40
Portable Air Hydraulic Tool...................................................F-40
Air-Operated Bench-Mounted Tool ......................................F-41
12-Ton Crimping Tools ........................................................F-42
Electric Hydraulic Pumps ....................................................F-43
Die Selection Charts........................................................F-44–F-46
Wire Guide Tables ...........................................................F-47–F-49
Military Standard Cross Reference............................................F-50
Cross Reference for Packaging .......................................F-51–F-52
Catamount®Terminals and Terminal Tools.......................F-53–F-55
Terminal Info ............................................................................F-56
Terminal Products
and Tools
Terminal Products and Tools
www.tnb.com
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
Terminal Products and Tools
Selectively annealed
long barrel
Longer barrel design
Color-coded Insulators
Brazed or overlapping
seams
Anti-rotational tongue
Hardened tongue
Complete wire and
stud size identification
Thomas & Betts developed the first tool-applied solderless terminals and
connectors more than 70 years ago in response to industry awareness
of the need for better performance of electrical systems.
Key Features and Benefits
Metal insulation grip sleeve is included
on all nylon terminal for strain relief
Long barrel selective annealed
UL®Listed E9808 unless otherwise specified
Experience the Sta-Kon® advantage!
Overview — Why Sta-Kon® Terminals Are Better
Funnel Entry
Barrel
Deep Internal Serrations
After the insertion of a wire into the terminal’s barrel, a deep, serrated
interior ensures a large area of contact that lowers the resistance of a
connection. With the mechanical force of the tool, the wire strands cold
flow into the serrated interior. This guarantees electrical resistance lower
than the wire to which it is applied. This feature also prevents pullout from
vibration and mechanical strain. Deep internal serrations can be compared
to the effective holding power of a well-treaded tire on a wet highway.
Funneled Terminal Barrel Entry
This feature makes wire insertion faster and easier. A funneled barrel
eliminates wire strand “hang up” upon insertion into the terminal’s barrel.
The loss of even a couple of wire strands can have negative results on
electrical efficiency and resistance to mechanical strain.
Sta-Kon®Long Barrel Design
If lowering electrical resistance, preventing wire pullout, eliminating
a “missed” crimp, and an insulator that stays on the barrel during
installation are your goals, then you must design a terminal with a long
barrel. Most competitive barrel lengths range from 20–50% shorter than
Sta-Kon
®
terminals. The results are usually a stream of electrical failure,
rework, and added expense. This also provides the insulator with additional
surface area, holding tight to the barrel. Many competitive insulators
come off during crimping due to a limited barrel length.
F-2
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
Superior terminals for superior connections!
Deep Internal Serrations
Flat bottom box
Electro-tin plating
Center reinforced spring
detent for minimum
insertion force
Compound Spring Rails
provide positive contact
after repeated insertions
Strands enter as a
homogeneous group and
compact tightly under
compression due to fully
brazed seam
Brazed or Overlapped Seam
A long barrel design is of little value unless it is one solid piece. That is why
Thomas & Betts brazes the seam on our vinyl insulated Sta-Kon
®
terminals
and overlaps the seam on nylon insulated terminals. Many competitive terminals
have butted seams. This means increased chances for wirestrand loss, poor
resistance, wire pullout, and electrical failure. If the installer doesn’t position
the tool exactly on the correct spot on the barrel, there’s likely going to be
an improper termination. The butted seam can also fold due to tool-applied
pressure piercing the terminals insulation from the inside out. With a brazed
or overlapped seam, the installer can crimp anywhere along the barrel’s surface.
This provides up to 2.5 times the tensile strength of a butted seam terminal,
guaranteeing proper electrical flow, void free.
Selective Annealing
Because of the mechanical strength of copper, an installer can
experience fatigue associated with repeated installations. For this
reason, Thomas & Betts puts its terminals through one more step
called selective annealing. This process leaves the barrel soft
enough to crimp and form around the wire. However, we “cold form” the
tongue during the manufacturing process so it remains strong. This is done so
the tongue can withstand repeated bends and bolt tightening strain common
in most electrical installations. Many competitors attempt to accomplish
similar goals by removing valuable material or using a softer copper, which
has lower conductivity. This increases electrical resistance as well as the odds
for shorting and downtime.
Overview — Why Sta-Kon® Terminals Are Better
Anti-Rotational Tongues
This is a unique feature to the Thomas & Betts ring tongue terminal. This
design prevents terminal shorting by keeping the terminal secure in the
terminal block. The installer can place a greater number of terminals closer
together without worry.
Proper Identification
We identify all terminals with Thomas & Betts initials, T & B. We also indicate
wire and stud sizes. These markings are clearly visible on the surface of the
tongue, taking any guesswork out of replacing or reordering additional parts.
Our superior bright plating also assists in visibility.
All Sta-Kon®Terminals
are Deburred and Degreased
To ensure a Sta-Kon®terminal is properly plated and insulated, all our parts
are put through a process that cleans and smooths the terminal of any
manufacturing by-products — mainly grease, oils, and sharp edges. Many
competitive products do not put their product through such rigorous finishing.
F-3
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Nylon-Insulated Ring Terminals
Terminal Products and Tools
Sta-Kon®Rings, Forks and Locking Forks
Complete line of installing tools engineered to match
tool with terminal
First to gain military approval for pressure connections…
many styles available for military applications
Sta-Kon®products exceed test specification
requirements of military, UL®, and CSA
Tefzel®and Nylon Terminals provided with extra
metal sleeve to grip insulation
Vinyl insulated and bare Sta-Kon®terminals feature
brazed seam wire barrels that can be crimped at any
place on the barrel circumference
Can be installed with crimping tools having a single
indentor or double indentor (recommended for solid wire)
Serrated barrel increases grip on wire
Wire range identification on the tongue of each terminal
Can be installed with crimping tools having a single
indentor or double indentor (recommended for solid wire)
Constructed of electrolytic copper for high conductivity
Wire range identification on the tongue of each terminal
Listing
Sta-Kon®Rings, Forks and Locking Forks are tested
and listed to UL®486A/B, two-way splices to UL 486C,
disconnects to UL 310, and all appli cable products
to CSA 22.2.
* Not listed by UL or CSA ** CSA Listed only
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RZ22-2** 100 26–22 .083 #2 .57 .14 .13 .49
RZ22-4** 100 26–22 .083 #4 .65 .21 .20 .54
RZ22-6** 100 26–22 .083 #6 WT1452 .65 .21 .20 .54 .02
RZ22-8** 100 26–22 .083 #8 .75 .25 .23 .62
RZ22-10** 100 26–22 .083 #10 .75 .25 .23 .62
RAX23* 1,000 26–24 .125 #2 .66 .14 .14 .59
RAX43* 1,000 26–24 .125 #4 .74 .20 .19 .64
RAX63* 1,000 26–24 .125 #6 WT145A .84 .25 .22 .72 .02
RAX83* 1,000 26–24 .125 #8 .84 .25 .22 .72
RAX103* 1,000 26–24 .125 #10 .84 .25 .24 .72
RA18-4 100 22–16 .136 #4 .72 .23 .14 .59
RA323 1,000 22–16 .136 #4 .72 .23 .14 .59
RA333 1,000 22–16 .136 #6 .72 .23 .14 .59
RA18-6 100 22–16 .136 #6 .86 .26 .25 .71
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RA853 1,000 22–16 .136 #6 .86 .26 .25 .71
RA18-8 100 22–16 .136 #8 .89 .26 .25 .71
RA833 1,000 22–16 .136 #8 .86 .26 .25 .71
RA863 1,000 22–16 .136 #8 .89 .26 .25 .71
RA18-10 100 22–16 .136 #10 .89 .31 .25 .71 .03
RA873 1,000 22–16 .136 #10 .89 .31 .25 .71
RA18-14 100 22–16 .136 14" 1.10 .46 .31 .84
RA713 1,000 22–16 .136 14" 1.10 .46 .31 .84
RA18-516 100 22–16 .136 516" 1.10 .46 .31 .84
RA723 1,000 22–16 .136 516" 1.10 .46 .31 .84
RA18-38 100 22–16 .136 38" 1.20 .53 .35 .87
RA733 1,000 22–16 .136 38" 1.20 .53 .35 .87
RA18-12 100 22–16 .136 12" 1.30 .72 .50 .92
RA753 1,000 22–16 .136 12" 1.30 .72 .50 .92
M
ERG2006
.02
.03
WT145A
ERG2001
.02
.03
WT145A
ERG2001
Nylon-Insulated Ring Terminals
F-4
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Tefzel
®
is a trademark of DuPont.
Nylon-Insulated Ring Terminals
Terminal Products and Tools
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RB14-4X 100 18–14 .190 #4 .80 .26 .14 .67
RB1324 1,000 18–14 .190 #4 .80 .26 .14 .67
RB14-6X 100 18–14 .190 #6 .95 .31 .25 .79
RB854 1,000 18–14 .190 #6 .95 .31 .25 .79
RB14-8X 100 18–14 .190 #8 .95 .31 .25 .79
RB864 1,000 18–14 .190 #8 .95 .31 .25 .79
RB14-10X 100 18–14 .190 #10 ERG2001 .95 .31 .25 .79 .03
RB874 1,000 18–14 .190 #10 .95 .31 .25 .79
RB14-14X 100 18–14 .190 14" 1.16 .47 .31 .92
RB714 1,000 18–14 .190 14" 1.16 .47 .31 .92
RB14-516X 100 18–14 .190 516" 1.16 .47 .31 .92
RB724 1,000 18–14 .190 516" 1.16 .47 .31 .92
RB14-38X 100 18–14 .190 38" 1.25 .53 .42 .95
RB734 1,000 18–14 .190 38" 1.25 .53 .42 .95
UL Listed E9809
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RC10-6X 50 12–10 .250 #6 1.10 .37 .27 .91
RC334 500 12–10 .250 #6 1.10 .37 .27 .91
RC10-8X 50 12–10 .250 #8 1.10 .37 .27 .91
RC864 500 12–10 .250 #8 1.10 .37 .27 .91
RC10-10X 50 12–10 .250 #10 1.10 .37 .27 .91
RC364 500 12–10 .250 #10 1.10 .37 .27 .91
RC10-14X 50 12–10 .250 14" ERG2001 1.22 .53 .32 .96 .04
RC714 500 12–10 .250 14" 1.22 .53 .32 .96
RC10-516X 50 12–10 .250 516" 1.32 .53 .31 1.05
RC704 500 12–10 .250 516" 1.32 .53 .31 1.05
RC10-38X 50 12–10 .250 38" 1.38 .59 .48 1.09
RC734 500 12–10 .250 38" 1.38 .59 .48 1.09
RC10-12X 50 12–10 .250 12" 1.48 .72 .52 1.13
M
ERG2001 .03 ERG2001 .03
M
Nylon-Insulated
Ring Terminals
(continued)
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RB14-4 100 18–14 .162 #4 .72 .26 .14 .59
RB1323 1,000 18–14 .162 #4 .72 .26 .14 .59
RB14-6 100 18–14 .162 #6 .89 .31 .25 .71
RB853 1,000 18–14 .162 #6 .89 .31 .25 .71
RB1333 1,000 18–14 .162 #6 .74 .26 .14 .59
RB14-8 100 18–14 .162 #8 .89 .31 .25 .71
RB863 1,000 18–14 .162 #8 .89 .31 .25 .71
RB14-10 100 18–14 .162 #10 .89 .31 .25 .71
RB873 1,000 18–14 .162 #10 ERG2001 .89 .31 .25 .71 .03
RB14-14 100 18–14 .162 14" 1.08 .47 .31 .81
RB713 1,000 18–14 .162 14" 1.08 .47 .31 .81
RB14-516 100 18–14 .162 516" 1.08 .47 .31 .84
RB723 1,000 18–14 .162 516" 1.08 .47 .31 .84
RB14-38 100 18–14 .162 38" 1.17 .53 .35 .87
RB733 1,000 18–14 .162 38" 1.17 .53 .35 .87
RB14-12 100 18–14 .162 12" 1.25 .72 .50 .90
RB753 1,000 18–14 .162 12" 1.25 .72 .50 .90
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RC10-6 50 12–10 .210 #6 1.00 .37 .27 .81
RC333 500 12–10 .210 #6 1.00 .37 .27 .81
RC10-8 50 12–10 .210 #8 1.00 .37 .27 .81
RC863 500 12–10 .210 #8 1.00 .37 .27 .81
RC10-10 50 12–10 .210 #10 1.00 .37 .27 .81
RC363 500 12–10 .210 #10 1.00 .37 .27 .81
RC10-14 50 12–10 .210 14" ERG2001 1.12 .53 .32 .86 .04
RC713 500 12–10 .210 14" 1.12 .53 .32 .86
RC10-516 50 12–10 .210 516" 1.21 .53 .31 .94
RC703 500 12–10 .210 516" 1.21 .53 .31 .94
RC10-38 50 12–10 .210 38" 1.27 .59 .35 .98
RC733 500 12–10 .210 38" 1.27 .59 .35 .98
RC10-12 50 12–10 .210 12" 1.37 .72 .52 1.02
RC753 500 12–10 .210 12" 1.37 .72 .52 1.02
ERG2001
ERG2001
.03
.04
Nylon-Insulated
Ring Terminals
Expanded Entry
F-5
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Nylon-Insulated Ring Terminals
Terminal Products and Tools
*Brazed Seam
AN=Aircraft Wire
PKG. WIRE MAX. BOLT REC. DIMENSIONS (IN.) STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL ABCM
THICK.
RD167 200 8 .340 #8 1.48 .42 .28 1.29
RD8-10 25 8 .340 #10 1.48 .42 .28 1.29
RD367 200 8 .340 #10 1.48 .42 .28 1.29
RD8-14 25 8 .340 14" 1.54 .46 .36 1.32
RD717 200 8 .340 14" ERG2007 1.54 .46 .36 1.32 .04
RD8-516 25 8 .340 516" 1.63 .57 .36 1.35
RD727 200 8 .340 516" 1.63 .57 .36 1.35
RD8-38 25 8 .340 38" 1.63 .57 .36 1.35
RD737 200 8 .340 38" 1.63 .57 .36 1.35
RD8-12* 25 8 .310 12" 1.79 .82 .55 1.39
RD757* 200 8 .310 12" TBM6S 1.79 .82 .55 1.39
RD10161 200 8AN .270 #8 1.40 .41 .24 1.20
RD10361 200 8AN .270 #10 1.40 .41 .24 1.20
RD10711 200 8AN .270 14" ERG2007 1.45 .45 .27 1.22 .04
RD10721 200 8AN .270 516" 1.53 .56 .34 1.25
RD10731 200 8AN .270 38" 1.53 .56 .34 1.25
RE6-10 20 6 .420 #10 1.65 .49 .28 1.40
RE267 200 6 .420 #10 1.65 .49 .28 1.40
RE6-14 20 6 .420 14" 1.65 .49 .28 1.40
RE717 200 6 .420 14" 1.65 .49 .28 1.40
RE6-516 20 6 .420 516" ERG2007 1.76 .61 .34 1.47 .04
RE727 200 6 .420 516" 1.76 .61 .34 1.47
RE6-38 20 6 .420 38" 1.76 .61 .34 1.47
RE737 200 6 .420 38" 1.76 .61 .34 1.47
RE6-12* 20 6 .395 12" 1.83 .82 .55 1.43
RE757* 200 6 .395 12" TBM6S 1.83 .82 .55 1.43
RE10261 200 6AN .315 #10 1.55 .49 .24 1.31
RE10711 200 6AN .315 14" 1.55 .49 .27 1.31
RE10721 200 6AN .315 516" ERG2007 1.70 .60 .34 1.40 .04
RE10731 200 6AN .315 38" 1.70 .60 .34 1.40
RF4-10 15 4 .510 #10 1.76 .56 .36 1.49
RF267 100 4 .510 #10 1.76 .56 .36 1.49
RF4-14 15 4 .510 14" 1.76 .56 .36 1.49
RF717 100 4 .510 14" 1.76 .56 .36 1.49
RF4-516 15 4 .510 516" 1.84 .62 .35 1.53
RF727 100 4 .510 516" 1.84 .62 .35 1.53
RF4-38 15 4 .510 38" 1.84 .62 .35 1.53
RF737 100 4 .510 38" 1.84 .62 .35 1.53
RF757* 100 4 .500 12" 1.90 .82 .55 1.49
RF10261 100 4AN .380 #10 1.78 .55 .30 1.51
RF10711 100 4AN .380 14" TBM6S 1.78 .55 .30 1.51 .04
RF10721 100 4AN .380 516" 1.80 .62 .34 1.49
RF10731 100 4AN .380 38" TBM6S 1.80 .82 .34 1.49 .04
PKG. WIRE MAX. BOLT REC. DIMENSIONS (IN.) STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RG2-10 10 2 .588 #10 2.15 .69 .40 1.83
RG267 50 2 .588 #10 2.15 .69 .40 1.83
RG2-14 10 2 .588 14" 2.15 .69 .40 1.83
RG717 50 2 .588 14" 2.15 .69 .40 1.83
RG2-516 10 2 .588 516" TBM6S 2.15 .69 .40 1.83 .05*
RG727 50 2 .588 516" 2.15 .69 .40 1.83
RG2-38 10 2 .588 38" 2.15 .69 .40 1.83
RG737 50 2 .588 38" 2.15 .69 .40 1.83
RG2-12 10 2 .588 12" 2.35 .80 .49 1.93
RG757 50 2 .588 12" 2.35 .80 .49 1.93
RG9711 50 2AN 453 14" 2.07 .69 .40 1.74
RG9731 50 2AN .453 38" TBM6S 2.07 .69 .40 1.74 .05*
RG9751 50 2AN .453 12" 2.26 .80 .49 1.84
RH717 50 1/0 .629 14" 2.14 .77 .43 1.81
RH727 50 1/0 .629 516" 2.14 .77 .43 1.81
RH737 50 1/0 .629 38" TBM6S 2.14 .77 .43 1.81 .05
RH757 50 1/0 .629 12" 2.34 .77 .54 1.90
RH9711 50 1AN .500 14" 2.14 .77 .44 1.81
RH9731 50 1AN .500 38" TBM6S 2.14 .77 .44 1.81 .05
RH9751 50 1AN .500 12" 2.34 .77 .54 1.90
RJ717 100 2/0 .675 14" 2.34 .83 .46 1.96
RJ727 100 2/0 .675 516" 2.34 .83 .46 1.96
RJ737 100 2/0 .675 38" TBM6S 2.34 .83 .46 1.96 .06
RJ757 100 2/0 .675 12" 2.48 .89 .54 2.03
RJ9711 50 1/0AN .550 14" 2.35 .83 .46 1.97
RJ9731 50 1/0AN .550 38" TBM6S 2.35 .83 .46 1.97 .06
RJ9751 50 1/0AN .550 12" 2.49 .89 .55 2.04
RK717 25 3/0 .765 14" 2.60 .93 .54 2.21
RK727 25 3/0 .765 516" TBM6S 2.60 .93 .54 2.21 .06
RK737 25 3/0 .765 38" 2.60 .93 .54 2.21
RK9731 100 2/0AN .610 38" 2.52 .93 .55 2.14
RK9751 100 2/0AN .610 12" TBM6S 2.60 .93 .55 2.15 .06
RL737 25 4/0 .785 38" 2.83 1.04 .57 2.35
RL757 25 4/0 .785 12" TBM6S 2.83 1.04 .57 2.35 .07
RL9731 25 3/0AN .680 38" 2.83 1.04 .57 2.36
RL9751 25 3/0AN .680 12" TBM6S 2.83 1.04 .57 2.36 .07
RM737 20 250MCM .868 38" 3.00 1.13 .65 2.51
RM747 20 250MCM .868 716" TBM6S 3.00 1.13 .65 2.51 .07
RM757 20 250MCM .868 12" 3.00 1.13 .65 2.51
RM9731 20 4/0AN .750 38" 3.00 1.13 .66 2.51
RM9751 20 4/0AN .750 12" TBM6S 3.00 1.13 .66 2.51 .07
ERG2007
TBM6S
.04
.05
.06
.07
TBM6S
ERG2007
ERG2007
TBM6S
ERG2007
TBM6S
Nylon-Insulated Large Ring Terminals
F-6
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Vinyl-Insulated Ring Terminals
Terminal Products and Tools
PKG. WIRE MAX. BOLT REC. DIMENSIONS (IN.) STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
18RA-6X 100 22–16 .170 #6 .97 .31 .27 .81
18RA-8X 100 22–16 .170 #8 .97 .31 .27 .81
RA867-170 1,000 22–16 .170 #8 .97 .31 .27 .81
18RA-10X 100 22–16 .170 #10 ERG2001 .97 .31 .27 .81 .03
RA877-170 1,000 22–16 .170 #10 .97 .31 .27 .81
18RA-14X 100 22–16 .170 14" 1.13 .50 .37 .88
RA727-170 1,000 22–16 .170 516" 1.13 .50 .37 .88
14RB-4X 100 18–14 .200 #4 .94 .25 .27 .81
14RB-6X 100 18–14 .200 #6 .97 .31 .27 .81
RB857-200 1,000 18–14 .200 #6 .97 .31 .27 .81
14RB-8X 100 18–14 .200 #8 .97 .31 .27 .81
RB867-200 1,000 18–14 .200 #8 .97 .31 .27 .81
14RB-10X 100 18–14 .200 #10 ERG2001 .97 .31 .27 .81 .03
RB877-200 1,000 18–14 .200 #10 .97 .31 .27 .81
14RB-14X 100 18–14 .200 14" 1.14 .50 .38 .89
RB717-200 1,000 18–14 .200 14" 1.14 .50 .38 .89
14RB-516X 100 18–14 .200 516" 1.15 .50 .38 .89
14RB-38X 100 18–14 .200 38" 1.16 .54 .35 .91
10RC-6X 50 12–10 .250 #6 1.06 .31 .27 .90
RC337-250 500 12–10 .250 #6 1.06 .31 .27 .90
10RC-8X 50 12–10 .250 #8 1.06 .31 .27 .90
RC777-250 500 12–10 .250 #8 1.06 .31 .27 .90
10RC-10X 50 12–10 .250 #10 1.06 .31 .27 .90
RC367-250 500 12–10 .250 #10 ERG2001 1.06 .31 .27 .90 .04
10RC-14X 50 12–10 .250 14" 1.16 .50 .27 .90
RC717-250 500 12–10 .250 14" 1.16 .50 .27 .90
10RC-516X 50 12–10 .250 516" 1.17 .50 .37 .92
10RC-38X 50 12–10 .250 38" 1.29 .59 .44 .99
RC737-250 500 12–10 .250 38" 1.29 .59 .44 .99
ERG2001
.03
.04
Extra-length PVC sleeve
offers extra protection.
Vinyl-Insulated Ring
Terminals
PKG. WIRE MAX. BOLT REC. DIMENSIONS (IN.) STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
18RA-4 100 22–16 .150 #4 .97 .31 .27 .81
RA77 1,000 22–16 .150 #4 .97 .31 .27 .81
18RA-6 100 22–16 .150 #6 .94 .25 .27 .81
RA857 1,000 22–16 .150 #6 .94 .25 .27 .81
18RA-8 100 22–16 .150 #8 .97 .31 .27 .81
RA867 1,000 22–16 .150 #8 .97 .31 .27 .81
18RA-10 100 22–16 .150 #10 ERG2001 .97 .31 .27 .81 .03
RA877 1,000 22–16 .150 #10 .97 .31 .27 .81
18RA-14 100 22–16 .150 14" 1.13 .50 .37 .88
RA717 1,000 22–16 .150 14" 1.13 .50 .37 .88
18RA-516 100 22–16 .150 516" 1.13 .50 .37 .88
RA727 1,000 22–16 .150 516" 1.13 .50 .37 .88
18RA-38 100 22–16 .150 38" 1.24 .54 .37 .91
RA737 1,000 22–16 .150 38" 1.24 .54 .37 .91
14RB-4 100 18–14 .170 #4 .94 .25 .27 .81
RB1327 1,000 18–14 .170 #4 .94 .25 .27 .81
14RB-6 100 18–14 .170 #6 .97 .31 .27 .81
RB857 1,000 18–14 .170 #6 .97 .31 .27 .81
14RB-8 100 18–14 .170 #8 .97 .31 .27 .81
RB867 1,000 18–14 .170 #8 .97 .31 .27 .81
14RB-10 100 18–14 .170 #10 ERG2001 .97 .31 .27 .81 .03
RB877 1,000 18–14 .170 #10 .97 .31 .27 .81
14RB-14 100 18–14 .170 14" 1.14 .50 .38 .89
RB717 1,000 18–14 .170 14" 1.14 .50 .38 .89
14RB-516 100 18–14 .170 516" 1.15 .50 .38 .89
RB727 1,000 18–14 .170 516" 1.15 .50 .38 .89
14RB-38 100 18–14 .170 38" 1.16 .54 .38 .91
RB737 1,000 18–14 .170 38" 1.16 .54 .38 .91
10RC-6 50 12–10 .210 #6 1.06 .31 .27 .90
RC337 500 12–10 .210 #6 1.06 .31 .27 .90
10RC-8 50 12–10 .210 #8 1.06 .31 .27 .90
RC777 500 12–10 .210 #8 1.06 .31 .27 .90
10RC-10 50 12–10 .210 #10 1.06 .31 .27 .90
RC367 500 12–10 .210 #10 ERG2001 1.06 .31 .27 .90 .04
10RC-14 50 12–10 .210 14" 1.16 .50 .27 .90
RC717 500 12–10 .210 14" 1.16 .50 .27 .90
10RC-516 50 12–10 .210 516" 1.17 .50 .37 .92
RC707 500 12–10 .210 516" 1.17 .50 .37 .92
10RC-38 50 12–10 .210 38" 1.29 .59 .44 .99
RC737 500 12–10 .210 38" 1.29 .59 .44 .99
ERG2001
.03
.04
Vinyl-Insulated Ring Terminals —
Expanded Insulation
A wider wire entry for heavy-wall insulation.
F-7
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Insulated and Non-Insulated Ring Terminals
Terminal Products and Tools
Constructed of electrolytic copper for high conductivity!
Non-Insulated Ring
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
A18-4 100 22–16 #4 .75 .31 .27 .59
A18-6 100 22–16 #6 .72 .25 .27 .59
A85 1,000 22–16 #6 .72 .25 .27 .59
A18-8 100 22–16 #8 .75 .31 .27 .59
A86 1,000 22–16 #8 .75 .31 .27 .59
A18-10 100 22–16 #10 .75 .31 .27 .59
A87 1,000 22–16 #10 .75 .31 .27 .59
A18-14 100 22–16 14" ERG2002 .92 .50 .37 .67 .03
A71 1,000 22–16 14" .92 .50 .37 .67
A18-516 100 22–16 516" .92 .50 .37 .67
A72 1,000 22–16 516" .92 .50 .37 .67
A18-38 100 22–16 38" .99 .54 .35 .67
A73 1,000 22–16 38" .99 .54 .35 .67
A18-12 100 22–16 12" 1.06 .72 .38 .70
A75 1,000 22–16 12" 1.06 .72 .38 .70
B14-4 100 18–14 #4 .72 .25 .27 .59
B132 1,000 18–14 #4 .72 .25 .27 .59
B14-6 100 18–14 #6 .72 .25 .27 .59
B133 1,000 18–14 #6 .72 .25 .27 .59
B14-8 100 18–14 #8 .75 .31 .27 .59
B86 1,000 18–14 #8 .75 .31 .27 .59
B14-10 100 18–14 #10 .75 .31 .27 .59
B87 1,000 18–14 #10 .75 .31 .27 .59
B14-14 100 18–14 14" ERG2002 .93 .50 .38 .68 .03
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
B71 1,000 18–14 14" .93 .50 .38 .68
B14-516 100 18–14 516" .93 .50 .38 .68
B72 1,000 18–14 516" .93 .50 .38 .68
B14-38 100 18–14 38" .96 .54 .35 .68
B73 1,000 18–14 38" .96 .54 .35 .68
B14-12 100 18–14 12" 1.06 .72 .38 .70
B75-TB 1,000 18–14 12" 1.06 .72 .38 .70
B85 1,000 18–14 #6 .75 .31 .27 .59
B134 1,000 18–14 #8 .72 .25 .27 .59
C10-6-SK 50 12–10 #6 .82 .31 .27 .66
C33 500 12–10 #6 .82 .31 .27 .66
C10-8-SK 50 12–10 #8 .82 .31 .27 .66
C77 500 12–10 #8 .82 .31 .27 .66
C10-10 50 12–10 #10 .85 .38 .27 .66
C26 500 12–10 #10 .85 .38 .27 .66
C36 500 12–10 #10 .82 .31 .27 .66
C10-14 50 12–10 14" ERG2002 .91 .50 .27 .66 .04
C71 500 12–10 14" .91 .50 .27 .66
C10-516 50 12–10 516" .98 .50 .38 .73
C70 500 12–10 516" .98 .50 .38 .73
C72 500 12–10 516" 1.10 .59 .45 .80
C10-38 50 12–10 38" 1.10 .59 .45 .80
C73 500 12–10 38" 1.10 .59 .45 .80
C10-12 50 12–10 12" 1.21 .72 .38 .84
C75 500 12–10 12" 1.21 .72 .38 .84
ERG2002
ERG2002
ERG2005
.03
.03
.04
ERG2002
ERG2005
WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
RANGE INS. HOLE TOOL A B C M THICK.
RDV167 8 .340 #8 ERG2007 1.48 .42 .28 1.17
RDV367 8 .340 #10 1.48 .42 .28 1.17
RDV717 8 .340 14" 1.54 .46 .36 1.20 .04
RDV727 8 .340 516" 1.63 .57 .36 1.23
RDV737 8 .340 38" 1.63 .57 .36 1.23
RDV757* 8 .310 12" TBM6S 1.79 .82 .55 1.27
REV267 6 .420 #10 ERG2007 1.65 .45 .28 1.23
REV717 6 .420 14" 1.65 .49 .28 1.23
REV727 6 .420 516" 1.76 .61 .34 1.30 .04
REV737 6 .420 38" 1.76 .61 .34 1.30
REV757* 6 .395 12" TBM6S 1.83 .82 .55 1.26
*Brazed Seam
.04
TBM6S
ERG2007
TBM6S
ERG2007
Vinyl-Insulated Large Ring Terminals
F-8
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Non-Insulated Ring Terminals
Terminal Products and Tools
Select the configuration you need!
Non-Insulated Large Ring Terminals — Tubular
A
M
C
B
Non-Insulated Large Ring Terminals —
Brazed Seam
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
D10161 200 8/8AN #8 1.15 .41 .28 .95
D10361 200 8/8AN #10 1.15 .41 .28 .95
D10711 200 8/8AN 14" 1.20 .45 .36 .97 .04
D10721 200 8/8AN 516" 1.28 .56 .36 1.00
D10731 200 8/8AN 38" 1.28 .56 .36 1.00
D975* 200 8/8AN 12" 1.46 .83 .49 1.06
E10261 200 6/6AN #10 1.26 .49 .24 1.02
E10711 200 6/6AN 14" 1.26 .49 .27 .99
E10721 200 6/6AN 516"
TBM6S
1.38 .60 .34 1.04 .04
E10731 200 6/6AN 38" 1.38 .60 .34 1.04
F10261 100 4/4AN #10 1.37 .55 .30 1.07
F10711 100 4/4AN 14" 1.37 .55 .30 1.07
F10721 100 4/4AN 516" 1.42 .62 .34 1.08 .04
F10731 100 4/4AN 38" 1.42 .62 .34 1.08
F975* 200 4/4AN 12" 1.49 .83 .45 1.10
G2-10 100 2/2AN #10 1.59 .69 .40 1.26
G926 100 2/2AN #10 1.59 .69 .40 1.26
G2-14 10 2/2AN 14" 1.59 .69 .40 1.26
G971 100 2/2AN 14" 1.59 .69 .40 1.26
G2-516 10 2/2AN 516" 1.59 .69 .40 1.26 .05
G972 100 2/2AN 516" 1.59 .69 .40 1.26
G2-38 10 2/2AN 38" 1.59 .69 .40 1.26
G973 100 2/2AN 38" 1.59 .69 .40 1.26
G2-12 10 2/2AN 12" 1.79 .80 .49 1.36
G975 100 2/2AN 12" 1.79 .80 .49 1.36
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
H10-14 10 1AN-1/0 14" 1.65 .77 .43 1.32
H971 100 1AN-1/0 14" 1.65 .77 .43 1.32
H972 100 1AN-1/0 516" 1.65 .77 .43 1.32 .05
H973 100 1AN-1/0 38" 1.65 .77 .43 1.32
H975 100 1AN-1/0 12" 1.85 .77 .54 1.41
J971 50 1/0AN-2/0 14" 1.94 .84 .48 1.53
J972 50 1/0AN-2/0 516" 1.94 .84 .48 1.53
J20-38 10 1/0AN-2/0 38"
TBM6S
1.84 .83 .46 1.46 .06
J973 50 1/0AN-2/0 38" 1.99 .84 .53 1.58
J974 50 1/0AN-2/0 716" 1.99 .89 .51 1.56
J975 50 1/0AN-2/0 12" 1.99 .89 .51 1.56
K971 50 2/0AN-3/0 14" 2.08 .93 .54 1.69
K972 50 2/0AN-3/0 516" 2.08 .93 .54 1.69
K30-38 5 2/0AN-3/0 38" 2.08 .93 .54 1.69 .06
K973 50 2/0AN-3/0 38" 2.08 .93 .54 1.69
K974 50 2/0AN-3/0 716" 2.08 .93 .54 1.70
K975 50 2/0AN-3/0 12" 2.08 .93 .54 1.70
L972 50 3/0AN-4/0 516" 2.25 1.04 .57 1.77
L40-38 5 3/0AN-4/0 38" 2.25 1.04 .57 1.77
L973 50 3/0AN-4/0 38" 2.25 1.04 .57 1.77 .07
L974 50 3/0AN-4/0 716" 2.25 1.04 .57 1.77
L975 50 3/0AN-4/0 12" 2.25 1.04 .57 1.77
M972 50
4/0AN-250MCM
516" 2.28 1.12 .62 1.90
M250-38 5
4/0AN-
250MCM 38" 2.40 1.12 .65 1.91
M973 50
4/0AN-250MCM
38" 2.40 1.12 .65 1.91 .07
M974 50
4/0AN-250MCM
716" 2.40 1.12 .65 1.91
M975 50
4/0AN-250MCM
12" 2.40 1.12 .65 1.91
*Brazed Seam AN – Aircraft Wire
ERG
2005
ERG
2008
ERG
2008
ERG
2005
ERG
2008
TBM6S
.04
.05
.05
.06
.07
TBM6S
TBM6S
ERG
2008
TBM6S
ERG
2008
TBM6S
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
D8-10 200 8 #10 1.13 .48 .36 .90
D826 25 8 #10 1.13 .48 .36 .90
D36 200 8 #10 1.09 .42 .34 .90
D8-14 25 8 14" 1.13 .48 .36 .90
D71 200 8 14" 1.13 .48 .36 .90
D8-516 25 8 516" TBM6S 1.32 .59 .49 1.03 .06
D72 200 8 516" 1.32 .59 .49 1.03
D8-38 25 8 38" 1.32 .59 .49 1.03
D73 200 8 38" 1.32 .59 .49 1.03
D8-12 25 8 12" 1.49 .82 .55 1.09
D75 200 8 12" 1.49 .82 .55 1.09
E6-10 20 6 #10 1.13 .48 .36 .90
E26 200 6 #10 1.13 .48 .36 .90
E6-14 20 6 14" TBM6S 1.13 .48 .36 .90 .06
E71 200 6 14" 1.13 .48 .36 .90
E6-516 20 6 516" 1.32 .60 .49 1.03
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
E72 200 6 516" 1.32 .60 .49 1.03
E6-38 20 6 38" 1.32 .60 .49 1.03
E73 200 6 38" TBM6S 1.32 .60 .49 1.03 .06
E6-12 20 6 12" 1.49 .82 .55 1.08
E75 200 6 12" 1.49 .82 .55 1.08
F4-10 20 4 #10 1.16 .48 .36 .93
F26 200 4 #10 1.16 .48 .36 .93
F4-14 20 4 14" 1.16 .48 .36 .93
F71-TB 200 4 14" 1.16 .48 .36 .93
F4-516 20 4 516" TBM6S 1.35 .60 .49 1.06 .07
F72 200 4 516" 1.35 .60 .49 1.06
F4-38 20 4 38" 1.35 .60 .49 1.06
F73 200 4 38" 1.35 .60 .49 1.06
F4-12 20 4 12" 1.52 .82 .55 1.11
F75 200 4 12" 1.52 .82 .55 1.11
TBM6S TBM6S
.06
.06
.07
F-9
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Heavy-Duty Ring Terminals
Terminal Products and Tools
The heavy-duty terminal solution!
CAT.
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
Nylon
RBC14-6 50 16–14 Heavy-duty .210 #6 .98 .25 .29 .85
RBC853 500 .210 #6 .98 .25 .29 .85
RBC14-8 50 16–14 Heavy-duty .210 #8 1.04 .39 .29 .85
RBC863 500 .210 #8 1.04 .39 .29 .85
RBC14-10 50 16–14 Heavy-duty .210 #10 1.04 .39 .29 .85
RBC873 500 .210 #10 1.04 .39 .29 .85
RBC14-14 50 16–14 Heavy-duty .210 14" WT145C 1.10 .51 .29 .85
RBC713 500 .210 14" 1.10 .51 .29 .85
RBC14-516 50 16–14 Heavy-duty .210 516" 1.21 .54 .38 .94
RBC723 500 .210 516" 1.21 .54 .38 .94
RBC14-38 50 16–14 Heavy-duty .210 38" 1.26 .63 .38 .94
RBC793 500 .210 38" 1.26 .63 .38 .94
RBC14-12 50 16–14 Heavy-duty .210 12" 1.49 .76 .54 1.11
RBC753 500 .210 12" 1.49 .76 .54 1.11
Vinyl
14RBC-6 50 16–14 Heavy-duty .210 #6 1.06 .25 .29 .93
RBC857 500 .210 #6 1.06 .25 .29 .93
14RBC-8 50 16–14 Heavy-duty .210 #8 1.13 .39 .29 .93
RBC867 500 .210 #8 1.13 .39 .29 .93
14RBC-10 50 16–14 Heavy-duty .210 #10 1.13 .39 .29 .93
RBC877 500 .210 #10 1.13 .39 .29 .93
14RBC-14 50 16–14 Heavy-duty .210 14" WT145C 1.19 .51 .29 .93
RBC717 500 .210 14" 1.19 .51 .29 .93
14RBC-516 50 16–14 Heavy-duty .210 516" 1.29 .54 .38 1.03
RBC727 500 .210 516" 1.29 .54 .38 1.03
14RBC-38 50 16–14 Heavy-duty .210 38" 1.34 .63 .38 1.03
RBC797 500 .210 38" 1.34 .63 .38 1.03
14RBC-12 50 16–14 Heavy-duty .210 12" 1.57 .76 .54 1.19
RB757 500 .210 12" 1.57 .76 .54 1.19
CAT.
PKG. WIRE BOLT REC. DIMENSIONS STOCK
NO.
QTY. RANGE HOLE TOOL A B C M THICK
BC14-6 50 16–14 Heavy-duty #6 .81 .25 .29 .68
BC85 500 #6 .81 .25 .29 .68
BC14-8 50 16–14 Heavy-duty #8 .87 .39 .29 .68
BC86 500 #8 .87 .39 .29 .68
BC14-10 50 16–14 Heavy-duty #10 .87 .39 .29 .68
BC87 500 #10 .87 .39 .29 .68
BC14-14 50 16–14 Heavy-duty 14" ER? .93 .51 .29 .68
BC71 500 14" .93 .51 .29 .68
BC14-516 50 16–14 Heavy-duty 516" 1.04 .54 .38 .77
BC72 500 516" 1.04 .54 .38 .77
BC14-38 50 16–14 Heavy-duty 38" 1.09 .63 .38 .77
BC79 500 38" 1.09 .63 .38 .77
BC14-12 50 16–14 Heavy-duty 12" 1.32 .76 .54 .94
BC75 500 12" 1.32 .76 .54 .94
Insulated Heavy-Duty Ring Terminals
Non-Insulated
Heavy-Duty
Terminals
WT2130A
ERG2002
ERG2005
.05
.05
F-10
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
High-Temperature Non-Insulated & Tefzel® Insulated Ring Terminals
Terminal Products and Tools
B
M
C
A
Tefzel®Insulated Ring —
Insulation Grip
High-Temperature Non-Insulated Ring — 1200° F Max.
Terminals for nichrome wire NW Series.
WT./LBS.
CAT.
PKG. WIRE PER BOLT REC. DIMENSIONS STOCK
NO.
QTY. RANGE 1,000 HOLE TOOL A B C M THICK.
NW21 1,000 24–22 1.5 #6 .59 .31 .28 .44
NW22 1,000 24–22 1.5 #8 WT1377 .59 .31 .28 .44 .032
NW23 1,000 24–22 1.5 #10 .59 .31 .28 .44
NW18-10 100 20–18 2.5 #10 .63 .31 .28 .38
NW52 1,000 20–18 2.5 #8 WT1377 .63 .31 .28 .38 .032
NW81 1,000 16–14 2.5 #6 .66 .31 .28 .51
NW14-8 100 16–14 2.5 #8 .66 .31 .28 .51
NW14-10 100 16–14 2.5 #10 .66 .31 .28 .51
NW83 1,000 16–14 2.5 #10 WT1377 .66 .31 .28 .51 .040
NW14-12 100 16–14 2.5 #12* .66 .31 .28 .51
NW84 1,000 16–14 2.5 #12* .66 .31 .28 .51
NW10-8 50 12–10 3 #8 .66 .31 .28 .51
NW10-10 50 12–10 3 #10 WT1377 .66 .31 .28 .51 .040
NW10-12 50 12–10 3 #12* .66 .31 .28 .51
* #12 stud is smaller than
1
4
" stud.
WT1377
.032
.040
CAT.
PKG. WIRE MAX BOLT REC. DIMENSIONS STOCK
NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RAT853 1,000 22–18 .140 #6 .81 .25 .25 .69
RAT863 1,000 22–18 .140 #8 .84 .31 .25 .69
RAT873 1,000 22–18 .140 #10 WT145C .84 .31 .25 .69 .03
RAT713 1,000 22–18 .140 14" 1.07 .46 .31 .84
RBT853 1,000 16–14 .170 #6 .84 .31 .25 .69
RBT863 1,000 16–14 .170 #8 .84 .31 .25 .69
RBT873 1,000 16–14 .170 #10 WT145C .84 .31 .25 .69 .03
RBT713 1,000 16–14 .170 14" 1.08 .46 .31 .81
RCT333 500 12–10 .210 #6 1.00 .37 .27 .81
RCT863 500 12–10 .210 #8 1.00 .37 .27 .81
RCT363 500 12–10 .210 #10 WT145C 1.00 .37 .27 .81 .04
RCT713 500 12–10 .210 14" 1.11 .52 .32 .85
RCT703 500 12–10 .210 516" 1.23 .52 .31 .96
RCT733 500 12–10 .210 38" 1.29 .58 .35 1.00
Tefzel
®
is a registered trademark of DuPont.
WT145C
.03
.04
F-11
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Nylon-Insulated and Non-Insulated Rectangular Ring Terminals
Terminal Products and Tools
A
M
C
B
A
M
C
B
Nylon-Insulated Rectangular Rings Non-Insulated Rectangular Rings
BU-SHIPS
CAT.
PKG. BOLT WIRE REC. DIMENSIONS TONGUE STOCK
NO.
QTY. HOLE RANGE TOOL A B C M SHAPE THICK.
RA486 1,000 #4 22–18 .796 .237 .237 .143 L86P-1
RA485 1,000 #4 22–18 1.015 .237 .404 .195 L85P-1
RA483 1,000 #5 22–18 .859 .277 .277 .143 L83P-1
RA484 1,000 #6 22–18 ERG2001 1.015 .237 .404 .195 L84P-1 .03
RA481 1,000 #6 22–18 1.109 .302 .465 .227 L81P-1
RA482 1,000 #8 22–18 1.109 .302 .465 .227 L82P-1
RA480** 1,000 #8 22–18 1.359 .390 .621 .310 L80P-1
RB486 1,000 #4 16–14 .796 .237 .237 .143 L86P-2
RB485 1,000 #4 16–14 1.015 .237 .404 .195 L85P-2
RB483 1,000 #5 16–14 .859 .277 .277 .143 L83P-2
RB484 1,000 #6 16–14 ERG2001 1.015 .237 .404 .195 L84P-2 .03
RB481 1,000 #6 16–14 1.109 .302 .465 .227 L81P-2
RB482 1,000 #8 16–14 1.109 .302 .465 .227 L82P-2
RB480** 1,000 #8 16–14 1.359 .390 .621 .310 L80P-2
RC486 500 #4 12–10 .984 .237 .237 .143 L86P-3
RC485 500 #4 12–10 1.187 .237 .404 .195 L85P-3
RC483 500 #5 12–10 1.046 .277 .277 .143 L83P-3
RC484 500 #6 12–10 ERG2001 1.203 .237 .404 .195 L84P-3 .04
RC481 500 #6 12–10 1.281 .302 .465 .227 L81P-3
RC482 500 #8 12–10 1.281 .302 .465 .227 L82P-3
RC480** 500 #8 12–10 1.531 .390 .621 .310 L80P-3
**
Not available on tape.
NOTE: RA, RB, RC486 for use with BU-Ships terminal board types 26TB. RA, RB, RC485
for use with 25TB and 27TB. RA, RB, RC483 for use with 8TB. RA, RB, RC484 for use
with 10TB and 11TB. RA, RB, RC481 for use with 6TB, 7TB and 9TB. RA, RB, RC482
for use with 15TB. RA, RB, RC480 for use with 3TB, 4TB, 5TB, 16TB, 17TB and 18TB.
NOTE:
22–18 ga. = 1–2 Navy
16–14 ga. = 2
1
2
–4 Navy
12–10 ga. = 6–9 Navy
ERG2001
.03
.04
BU-SHIPS
CAT.
PKG. BOLT WIRE REC. DIMENSIONS TONGUE STOCK
NO.
QTY. HOLE RANGE TOOL A B C M SHAPE THICK.
A486 1,000 #4 22–18 .65 .237 .237 .143 L86
A485 1,000 #4 22–18 .87 .237 .404 .195 L85
A483 1,000 #5 22–18 .70 .277 .277 .143 L83
A484 1,000 #6 22–18 .87 .237 .404 .195 L84
A481 1,000 #6 22–18 .96 .302 .465 .227 L81
A482 1,000 #8 22–18 .96 .302 .465 .227 L82
A480** 1,000 #8 22–18 1.21 .390 .621 .310 L80
B486 1,000 #4 16–14 .65 .237 .237 .143 L86
B485 1,000 #4 16–14 .87 .237 .404 .195 L85
B483 1,000 #5 16–14 .70 .277 .277 .143 L83
B484 1,000 #6 16–14 .87 .237 .404 .195 L84
B481 1,000 #6 16–14 .96 .302 .465 .227 L81
B482 1,000 #8 16–14 .96 .302 .465 .227 L82
B480** 1,000 #8 16–14 1.21 .390 .621 .310 L80
C486 500 #4 12–10 .73 .237 .237 .143 L86
C485 500 #4 12–10 .90 .237 .404 .195 L85
C483 500 #5 12–10 .76 .277 .277 .143 L83
C484 500 #6 12–10 .94 .237 .404 .195 L84
C481 500 #6 12–10 1.03 .302 .465 .227 L81
C482 500 #8 12–10 1.03 .302 .465 .227 L82
C480** 500 #8 12–10 1.27 .390 .621 .310 L80
**
Not available on tape.
NOTE: A, B, C486 for use with Bu-Ships terminal board types 26TB. A, B. C485 for use
with 25TB, 27TB. A, B, C483 for use with 8TB. A, B, C484 for use with 10TB and 11TB. A,
B, C481 for use with 6TB, 7TB and 9TB. A, B, C482 for use with 15TB. A, B, C480 for use
with 3TB, 5TB, 16TB, 17TB and 18TB.
NOTE:
22–18 ga. = 1–2 Navy
16–14 ga. = 2
1
2
–4 Navy
12–10 ga. = 6–9 Navy
ERG2002
ERG2002
ERG2005
.03
.04
F-12
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Non-Insulated Flag Terminals
Terminal Products and Tools
A
M
C
B
Non-Insulated Flag
CAT.
PKG. WIRE BOLT REC. DIMENSIONS STOCK
NO.
QTY. RANGE HOLE TOOL A B C M THICK.
AB14-6A 100 22–14 #6 .55 .31 .22 .39 .03
AB51 1,000 22–14 #6 .55 .31 .22 .39 .03
AB14-8A 100 22–14 #8 ERG2004 .55 .31 .22 .39 .03
AB52 1,000 22–14 #8 .55 .31 .22 .39 .03
AB14-10A 100 22–14 #10 .55 .31 .22 .39 .03
AB53 1,000 22–14 #10 .55 .31 .22 .39 .03
C51 500 12–10 #6 .66 .31 .25 .48 .04
C10-8A 50 12–10 #8 .66 .31 .25 .48 .04
C52 500 12–10 #8 ERG2004 .66 .31 .25 .48 .04
C10-10A 50 12–10 #10 .66 .31 .25 .48 .04
C53 500 12–10 #10 .66 .31 .25 .48 .04
D236 200 8 #10 .83 .50 .25 .59 .06
D226 200 8 #10 .90 .50 .29 .64 .06
D271 200 8 14" .92 .50 .33 .68 .06
E226 200 6 #10 .93 .50 .29 .69 .06
E271 200 6 14" .99 .50 .33 .73 .06
E272 200 6 516" WT129 1.05 .50 .41 .81 .06
F226 200 4 #10 1.07 .56 .33 .80 .07
F271 200 4 14" 1.10 .63 .33 .80 .07
F272 200 4 516" 1.18 .63 .41 .88 .07
F273 200 4 38" 1.20 .63 .43 .90 .07
G671 100 2 14" 1.20 .63 .33 .89 .08
G672 100 2 516" 1.28 .63 .41 .97 .08
G673 100 2 38" 1.32 .63 .46 1.02 .08
H672 50 1/0 516" 1.31 .63 .41 1.01 ???
H673 50 1/0 38" 1.36 .63 .46 1.06 ???
J672 50 2/0 516" 1.46 .75 .41 1.10 ???
J673 50 2/0 38" 1.51 .75 .46 1.15 ???
J675 50 2/0 12" 13642M 1.67 .75 .55 1.24 ???
K672 50 3/0 516" 1.59 .81 .41 1.19 ???
K673 50 3/0 38" 1.64 .81 .46 1.24 ???
K675 50 3/0 12" 1.76 .81 .55 1.34 ???
M673 50 250MCM 38" 1.89 1.0 .46 1.43 ???
M675 50 250MCM 12" 1.99 1.0 .55 1.52 ???
ERG2004
.03
.04
.06
.07
.08
.11
.13
.10
WT129
13642M
F-13
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
.02
.03
.04
.02
.03
.04
Nylon-Insulated Fork Terminals
Terminal Products and Tools
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RA18-6F 100 22–16 .136 #6 .83 .25 .25 .71
RA1103 1,000 22–16 .136 #6 .83 .25 .25 .71
RA18-8F 100 22–16 .136 #8 .86 .31 .25 .71
RA1123 1,000 22–16 .136 #8 .86 .31 .25 .71
RA18-10F 100 22–16 .136 #10 .86 .31 .25 .71
RA1153 1,000 22–16 .136 #10 .86 .31 .25 .71
RA18-14F 100 22–16 .136 14" .95 .44 .31 .70
RA1163 1,000 22–16 .136 14" .95 .44 .31 .70
RB14-6F 100 18–14 .162 #6 .87 .31 .25 .71
RB1113 1,000 18–14 .162 #6 .87 .31 .25 .71
RB14-8F 100 18–14 .162 #8 .87 .31 .25 .71
RB1123 1,000 18–14 .162 #8 .87 .31 .25 .71
RB14-10F 100 18–14 .162 #10 .87 .38 .25 .71
RB1153 1,000 18–14 .162 #10 .87 .38 .25 .71
RB14-14F 100 18–14 .162 14" .95 .44 .28 .74
RB1163 1,000 18–14 .162 14" .95 .44 .28 .74
RB1103 1,000 18–14 .162 #6 .74 .28 .16 .60
RB1124 1,000 18–14 .190 #8 .95 .31 .25 .79
RB1154 1,000 18–14 .190 #10 .95 .31 .25 .79
RC10-6F 50 12–10 .210 #6 .97 .31 .27 .81
RC1113 500 12–10 .210 #6 .97 .31 .27 .81
RC10-8F 50 12–10 .210 #8 1.00 .37 .27 .81
RC1123 500 12–10 .210 #8 1.00 .37 .27 .81
RC10-10F 50 12–10 .210 #10 1.00 .37 .27 .81
RC1153 500 12–10 .210 #10 1.00 .37 .27 .81
RC10-14F 50 12–10 .210 14" 1.12 .50 .27 .86
RC1163 500 12–10 .210 14" 1.12 .50 .27 .86
RC1124 1,000 12–10 .250 #8 1.10 .37 .27 .91
RC1154 1,000 12–10 .250 #10 1.10 .37 .27 .91
ERG
2001
Fork terminals enable easy installation
because the mounting screw does not
have to be completely removed
Brazed seam barrel is serrated for
high pull-out value. Terminal is high
conductivity electrolytic copper, electro-
tin plated. Insulation is color-coded
Vinyl insulated fork terminals have
extra-long PVC insulation sleeve for
protection and stress relief at wire’s
flex point
Suffix “X” indicates an expanded
insulation support, meaning a wider
wire entry to accommodate heavy
wall insulation
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RA18-6FL 100 22–16 .136 #6 .86 .25 .25 .71
RA2213 1,000 22–16 .136 #6 .86 .25 .25 .71
RA18-8FL 100 22–16 .136 #8 .86 .29 .25 .71
RA2243 1,000 22–16 .136 #8 .86 .29 .25 .71
RA18-10FL 100 22–16 .136 #10 .86 .29 .25 .71
RA2253 1,000 22–16 .136 #10 .86 .29 .25 .71
RB14-6FL 100 18–14 .162 #6 .87 .25 .25 .71
RB2213 1,000 18–14 .162 #6 .87 .25 .25 .71
RB2214 1,000 18–14 .190 #6 .95 .25 .25 .79
RB14-8FL 100 18–14 .162 #8 .87 .29 .25 .71
RB2233 1,000 18–14 .162 #8 .87 .29 .25 .71
RB14-10FL 100 18–14 .162 #10 .87 .29 .25 .71
RB2253 1,000 18–14 .162 #10 .87 .29 .25 .71
RB2254 1,000 18–14 .190 #10 .95 .29 .25 .71
RC10-6FL 50 12–10 .210 #6 .97 .31 .27 .81
RC2203 500 12–10 .210 #6 .97 .31 .27 .81
RC2204 1,000 12–10 .250 #6 1.07 .31 .27 .91
RC10-8FL 50 12–10 .210 #8 1.00 .37 .27 .81
RC2213 500 12–10 .210 #8 1.00 .37 .27 .81
RC10-10FL 50 12–10 .210 #10 1.00 .37 .27 .81
RC2223 500 12–10 .210 #10 1.00 .37 .27 .81
RC2224 1,000 12–10 .250 #10 1.10 .37 .27 .91
RC10-14FL 50 12–10 .210 14" 1.12 .50 .32 .86
RC2233 500 12–10 .210 14" 1.12 .50 .32 .86
Nylon-Insulated Locking ForkNylon-Insulated Fork
ERG
2001
F-14
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
.02
.03
.04
.02
.03
.04
Vinyl-Insulated Fork Terminals
Terminal Products and Tools
Vinyl-Insulated Fork Nylon-Insulated Fork —
Flanged Tongue
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RA18-6FS 100 22–16 .136 #6 .75 .28 .16 .62
RA1203 1,000 22–16 .136 #6 .75 .28 .16 .62
RA18-8FS 100 22–16 .136 #8 .89 .31 .23 .65
RA1223 1,000 22–16 .136 #8 .89 .31 .23 .65
RA18-10FS 100 22–16 .136 #10 .93 .38 .26 .68
RA1253 1,000 22–16 .136 #10 .93 .38 .26 .68
RB14-6FS 100 18–14 .162 #6 .74 .28 .16 .60
RB1203 1,000 18–14 .162 #6 .74 .28 .16 .60
RB14-8FS 100 18–14 .162 #8 .89 .31 .23 .66
RB1223 1,000 18–14 .162 #8 .89 .31 .23 .66
RB14-10FS 100 18–14 .162 #10 .94 .38 .27 .69
RB1253 1,000 18–14 .162 #10 .94 .38 .27 .69
RB1204 1,000 18–14 .190 #6 .79 .28 .16 .67
RB1224 1,000 18–14 .190 #8 .94 .31 .23 .71
RC10-8FS 50 12–10 .210 #8 .97 .34 .23 .73
RC1223 500 12–10 .210 #8 .97 .34 .23 .73
RC10-10FS 50 12–10 .210 #10 1.00 .38 .26 .74
RC1253 500 12–10 .210 #10 1.00 .38 .26 .74
RC1224 1,000 12–10 .250 #8 1.08 .34 .23 .80
RC1254 1,000 12–10 .250 #10 1.12 .38 .26 .86
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
18RA-6F 100 22–16 .150 #6 .94 .25 .27 .81
RA1167 1,000 22–16 .150 #6 .94 .25 .27 .81
18RA-8F 100 22–16 .150 #8 .97 .31 .27 .81
RA1147 1,000 22–16 .150 #8 .97 .31 .27 .81
18RA-10F 100 22–16 .150 #10 .97 .31 .27 .81
RA1157 1,000 22–16 .150 #10 .97 .31 .27 .81
14RB-6F 100 18–14 .170 #6 .97 .31 .27 .81
RB647 1,000 18–14 .170 #6 .97 .31 .27 .81
14RB-6FS 100 18–14 .170 #6 .89 .30 .25 .75
14RB-8F 100 18–14 .170 #8 .97 .31 .27 .81
RB657 1,000 18–14 .170 #8 .97 .31 .27 .81
14RB-10F 100 18–14 .170 #10 .97 .31 .27 .81
RB1157 1,000 18–14 .170 #10 .97 .31 .27 .81
14RB-14F 100 18–14 .170 14" 1.11 .44 .38 .89
RB1717 1,000 18–14 .170 14" 1.11 .44 .38 .89
10RC-6F 50 12–10 .210 #6 1.09 .31 .27 .90
RC1337 500 12–10 .210 #6 1.09 .31 .27 .90
10RC-8F 50 12–10 .210 #8 1.09 .38 .27 .90
RC1147 500 12–10 .210 #8 1.09 .38 .27 .90
10RC-10F 50 12–10 .210 #10 1.09 .38 .27 .90
RC1157 500 12–10 .210 #10 1.09 .38 .27 .90
10RC-14F 50 12–10 .210 14" 1.15 .50 .37 .90
RC1167 500 12–10 .210 14" 1.15 .50 .37 .90
ERG
2001 ERG
2001
F-15
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
.02
.03
.04
.02
.03
.04
Vinyl-Insulated Fork Terminals
Terminal Products and Tools
Vinyl-Insulated Locking Fork
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
18RA-6FL 100 22–16 .150 #6 .97 .25 .25 .81
RA2217 1,000 22–16 .150 #6 .97 .25 .25 .81
RA2227 1,000 22–16 .155 #6 .97 .29 — .81
18RA-8FL 100 22–16 .150 #8 .97 .29 .25 .81
RA2247 1,000 22–16 .150 #8 .97 .29 .25 .81
18RA-10FL 100 22–16 .150 #10 .97 .29 .25 .81
RA2257 1,000 22–16 .150 #10 .97 .29 .25 .81
14RB-6FL 100 18–14 .170 #6 .97 .25 .27 .81
RB2207 1,000 18–14 .170 #6 .97 .25 .27 .81
RB2217 1,000 18–14 .170 #6 .97 .29 .27 .81
14RB-8FL 100 18–14 .170 #8 .97 .29 .27 .81
RB2237 1,000 18–14 .170 #8 .97 .29 .27 .81
14RB-10FL 100 18–14 .170 #10 .97 .29 .27 .81
RB2257 1,000 18–14 .170 #10 .97 .29 .27 .81
10RC-6FL 50 12–10 .220 #6 1.09 .31 .27 .90
RC2207 500 12–10 .220 #6 1.09 .31 .27 .90
10RC-8FL 50 12–10 .220 #8 1.09 .37 .27 .90
RC2217 500 12–10 .220 #8 1.09 .37 .27 .90
10RC-10FL 50 12–10 .220 #10 1.09 .37 .27 .90
RC2227 500 12–10 .220 #10 1.09 .37 .27 .90
10RC-14FL 50 12–10 .220 14" 1.09 .49 .27 .90
RC2237 500 12–10 .220 14" 1.09 .49 .27 .90
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
18RA-6FX 100 22–16 .170 #6 .94 .25 .27 .81
RA1167-170 1,000 22–16 .170 #6 .94 .25 .27 .81
18RA-8FX 100 22–16 .170 #8 .97 .31 .27 .81
RA1147-170 1,000 22–16 .170 #8 .97 .31 .27 .81
18RA-10FX 100 22–16 .170 #10 .97 .31 .27 .81
RA1157-170 1,000 22–16 .170 #10 .97 .31 .27 .81
14RB-6FX 100 18–14 .200 #6 .97 .31 .27 .81
RB647-200 1,000 18–14 .200 #6 .97 .31 .27 .81
14RB-8FX 100 18–14 .200 #8 .97 .31 .27 .81
RB657-200 1,000 18–14 .200 #8 .97 .31 .27 .81
14RB-10FX 100 18–14 .200 #10 .97 .31 .27 .81
RB1157-200 1,000 18–14 .200 #10 .97 .31 .27 .81
10RC-8FX 50 12–10 .250 #8 1.11 .38 .27 .90
RC1147-250 500 12–10 .250 #8 1.11 .38 .27 .90
10RC-10FX 50 12–10 .250 #10 1.11 .38 .27 .90
RC1157-250 500 12–10 .250 #10 1.11 .38 .27 .90
10RC-14FX 50 12–10 .250 14" 1.17 .50 .37 .90
ERG
2001
ERG
2001
Vinyl-Insulation Fork —
Expanded Insulation
F-16
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
.02
.03
.04
.02
.03
.04
Vinyl-Insulated & Non-Insulated Fork Terminals
Terminal Products and Tools
Vinyl-Insulated Locking Fork—
Expanded Insulation Non-Insulated Fork
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
A18-6F 100 22–16 #6 .72 .25 .27 .59
A116 1,000 22–16 #6 .72 .25 .27 .59
A18-8F 100 22–16 #8 .75 .31 .27 .59
A114 1,000 22–16 #8 .75 .31 .27 .59
A18-10F 100 22–16 #10 .75 .31 .27 .59
A115-TB 1,000 22–16 #10 .75 .31 .27 .59
B14-6F 100 18–14 #6 .75 .31 .27 .59
B64 1,000 18–14 #6 .75 .31 .27 .59
B19 1,000 18–14 #6 .66 .25 .13 .50
B14-8F 100 18–14 #8 .75 .31 .27 .59
B65-TB 1,000 18–14 #8 .75 .31 .27 .59
B14-10F 100 18–14 #10 .75 .31 .27 .59
B115 1,000 18–14 #10 .75 .31 .27 .59
B14-14F 100 18–14 14" .90 .44 .38 .68
C10-6F 50 12–10 #6 .77 .31 .27 .63
C133 500 12–10 #6 .77 .31 .27 .63
C10-8F 50 12–10 #8 .82 .38 .27 .63
C114 500 12–10 #8 .82 .38 .27 .63
C10-10F 50 12–10 #10 .82 .38 .27 .63
C115 500 12–10 #10 .82 .38 .27 .63
C10-14F 50 12–10 14" .98 .50 .37 .73
C116-TB 500 12–10 14" .98 .50 .37 .73
ERG
2002
ERG
2002
ERG
2005
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
18RA-6FLX 100 22–16 .170 #6 .97 .25 .25 .81
18RA-8FLX 100 22–16 .170 #8 .97 .29 .25 .81
18RA-10FLX 100 22–16 .170 #10 .97 .29 .25 .81
RA2257-170 1,000 22–16 .170 #10 .97 .29 .25 .81
14RB-6FLX 100 18–14 .200 #6 .97 .31 .27 .81
RB2207-200 1,000 18–14 .200 #6 .97 .31 .27 .81
RB2217-200 1,000 18–14 .200 #6 .97 .29 .27 .81
14RB-8FLX 100 18–14 .200 #8 .97 .31 .27 .81
RB2237-200 1,000 18–14 .200 #8 .97 .31 .27 .81
14RB-10FLX 100 18–14 .200 #10 .97 .31 .27 .81
RB2257-200 1,000 18–14 .200 #10 .97 .31 .27 .81
10RC-6FLX 50 12–10 .250 #6 1.07 .31 .27 .91
RC2207-250 500 12–10 .250 #6 1.07 .31 .27 .91
10RC-8FLX 50 12–10 .250 #8 1.10 .37 .27 .91
10RC-10FLX 50 12–10 .250 #10 1.10 .37 .27 .91
RC2227-250 500 12–10 .250 #10 1.10 .37 .27 .91
10RC-14FLX 50 12–10 .250 14" 1.22 .50 .32 .96
ERG
2001
F-17
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Locking Fork & Pin Terminals
Terminal Products and Tools
Non-Insulated Locking
Fork Terminals Pin Terminals
PKG. WIRE BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE HOLE TOOL A B C M THICK.
A18-6FL 100 22–16 #6 .75 .25 .27 .59
A221 1,000 22–16 #6 .75 .25 .27 .59
A18-8FL 100 22–16 #8 .75 .29 .27 .59
A224 1,000 22–16 #8 .75 .29 .27 .59
A18-10FL 100 22–16 #10 .75 .29 .27 .59
A225 1,000 22–16 #10 .75 .29 .27 .59
B14-6FL 100 18–14 #6 .75 .25 .27 .59
B220 1,000 18–14 #6 .75 .25 .27 .59
B14-8FL 100 18–14 #8 .75 .29 .27 .59
B223 1,000 18–14 #8 .75 .29 .27 .59
B14-10FL 100 18–14 #10 .75 .29 .27 .59
B225 1,000 18–14 #10 .75 .29 .27 .59
C10-6FL 50 12–10 #6 .85 .31 .27 .66
C220-TB 500 12–10 #6 .85 .31 .27 .66
C10-8FL 50 12–10 #8 .85 .37 .27 .66
C221 500 12–10 #8 .85 .37 .27 .66
C10-10FL 50 12–10 #10 .85 .37 .27 .66
C222 500 12–10 #10 .85 .37 .27 .66
C10-14FL 50 12–10 14" .85 .49 .27 .66
ERG
2002
ERG
2002
ERG
2005
.02
.03
.04
ERG2002
PKG. WIRE D REC. STOCK
CAT. NO.
QTY. RANGE (DIA.) L TOOLS THICK.
Non-Insulated
A47PT 1,000 22–18 .075 .63
B47PT 1,000 16–14 .075 .63
C55PT 500 12–10 .106 .76
Vinyl
18RA-47PT 100 22–18 .075 .85
RA47PT 1,000 22–18 .075 .85
14RB-47PT 100 16–14 .075 .87
RB47PT 1,000 16–14 .075 .87
10RC-55PT 50 12–10 .106 1.04
RC55PT 500 12–10 .106 1.04
Nylon
RA18-47PT 100 22–18 .075 .85
RA147PT 1,000 22–18 .075 .85
RB14-47PT 100 16–14 .075 .87
RB147PT 1,000 16–14 .075 .87
RC10-55PT 50 12–10 .106 1.04
RC155PT 500 12–10 .106 1.04
ERG2001
Insulated Pin Terminal
Non-Insulated Pin Terminal
.02
.03
.04
.02
.03
.04
.02
.03
.04
F-18
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
MAX
PKG. INS. WIRE REC. DIMENSIONS
CAT. NO.
QTY. DIA. RANGE TOOL A B
2RA18 100 .115 22–18 ERG2001 1.19 .18
RAA21 1,000 .115 22–18 ERG2001 1.19 .18
2RB14 100 .148 16–14 ERG2001 1.19 .21
RBB21 1,000 .148 16–14 ERG2001 1.19 .21
2RC10 50 .210 12–10 ERG2001 1.26 .28
RCC21 500 .210 12–10 ERG2001 1.26 .28
2RD8 25 .340 8 TBM6S 1.69 .36
RDD27 200 .340 8 TBM6S 1.69 .36
2RE6 20 .420 6 TBM6S 1.85 .45
REE28 200 .420 6 TBM6S 1.85 .45
2RF4 15 .510 4 TBM6S 1.85 .52
Splice Connectors
Terminal Products and Tools
PKG. WIRE REC. DIMENSIONS
CAT. NO.
QTY. RANGE TOOL A B
2RZZ 50 26–22 WT1452 1.22 .15
2RAA 50 22–18 FRG2001 1.52 .25
RAA23 500 22–18 FRG2001 1.52 .25
2RBB 50 16–14 FRG2001 1.52 .28
RBB23 500 16–14 FRG2001 1.52 .28
2RCC 25 12–10 FRG2001 1.54 .35
RCC23 250 12–10 FRG2001 1.54 .35
MAX.
PKG. WIRE INS. REC. DIMENSIONS
CAT. NO.
QTY. RANGE DIA. TOOL A B
RAAT21 1,000 22–18 1.22 WT145C 1.22 .115
RBBT21 1,000 16–14 1.22 WT145C 1.22 .148
RCCT21 1,000 12–10 1.22 WT145C 1.22 .210
Tefzel
®
is a registered trademark of DuPont.
Nylon-Insulated
Aircraft Splices
Tefzel®-Insulated Butt Splice
Nylon-Insulated Butt Splices
Splices
Butt Splices
Wires are butted together and crimped
at each end of the splice
Available either non-insulated or insulated
with nylon or PVC
Nylon insulated splices meet or exceed
the requirements of MIL-T-7928
Color-coded according to wire size
Parallel Splices
Wires are laid side by side in
the connector, and the connection
is made in one crimp
Offer advantages in simplicity
of installation and small size
One crimp completes the splice
ERG2006
WT145C
ERG2001
ERG2007
TBM6S
PKG. WIRE MAX. REC. DIMENSIONS
CAT. NO.
QTY. RANGE INS TOOL A B
2RA18X 100 22–18 .170 ERG2001 1.13 .25
RAA217-170 1,000 22–18 .170 ERG2001 1.13 .25
RAA217 1,000 22–18 .155 ERG2001 1.13 .23
2RB14X 100 16–14 .200 ERG2001 1.13 .26
RBB217-200 1,000 16–14 .200 ERG2001 1.13 .26
RBB217 1,000 16–14 .180 ERG2001 1.13 .23
2RC10X 50 12–10 .250 ERG2001 1.31 .31
RCC217-250 500 12–10 .250 ERG2001 1.31 .31
RCC217 1,000 12–10 .210 ERG2001 1.31 .29
Vinyl-Insulated Splices —
Butt Type — Expanded Insulation
ERG2001
A
B
ERG2001
F-19
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Splice Connectors
Terminal Products and Tools
Sta-Kon®Parallel Splices
PKG. WIRE REC. DIMENSIONS
CAT. NO.
QTY. RANGE TOOL A B
2A20 100 22–20 ? .84 .20
RAA24 1,000 22–20 ? .84 .20
2B-16 100 18–16 ? .84 .23
RBB25 1,000 18–16 ? .84 .23
2C-12 50 14–12 ? .90 .28
RCC26 500 14–12 ? .90 .28
PKG. WIRE REC. DIMENSIONS
CAT. NO.
QTY. RANGE TOOL A B
2A-18 100 22–18 EGR2002 .62 .12
AA2 1,000 22–18 EGR2002 .62 .12
2B-14 100 16–14 EGR2002 .62 .16
BB2 1,000 16–14 EGR2002 .62 .16
2C-10 50 12–10 EGR2002 .72 .22
CC2 500 12–10 EGR2002 .72 .22
2D-8 25 9–8–7 TBM65 1.03 .28
DD102 200 9–8–7 TBM65 1.03 .28
2E-6 20 6–5 TBM65 1.12 .37
EE2 200 6–5 TBM65 1.12 .37
2F-4 15 4–3 TBM65 1.25 .44
FF2 200 4–3 TBM65 1.25 .44
2G21 5 2–1 TBM65 1.72 .55
GG2 25 2–1 TBM65 1.72 .55
Non-Insulated
Butt Splices
A
B
C
ERG2001
ERG2002
ERG2002
ERG2005
TBM6S
ERG2005
TBM6S
WIRE CIR MIL REC. LENGTH O.D. I.D. PKG.
CAT. NO.
RANGE RANGE TOOL (A) (B) (C) QTY.
A18-PS-M 22–16 AWG 509–3,260 ERG2002 0.314 0.129 0.086 1,000
B14-PS-M 16–14 AWG 2,050–5,180 ERG2002 0.315 0.155 0.113 1,000
C10-PS-D 12–10 AWG 5,180–13,100 ERG2002 0.380 0.220 0.170 500
D8-PS-D 8 AWG 13,100–20,800 WT1115A 0.375 0.260 0.180 500
E6-PS-D 6 AWG 20,800–33,100 WT1115A 0.500 0.365 0.266 500
F4-PS-W 4 AWG 33,100–52,600 WT1115A 0.531 0.410 0.302 250
G2-PS-W 2 AWG 52,600–83,700 WT1115A 0.640 0.521 0.396 250
H1/0-PS-C 1/0 AWG 83,700–119,500 TBM8750 0.750 0.571 0.446 100
J2/0-PS-C 2/0 AWG 119,500–150,500 TBM8750 0.750 0.632 0.507 100
K3/0-PS-L 3/0 AWG 150,500–190,000 TBM8750 0.750 0.701 0.564 50
L4/0-PS-L 4/0 AWG 190,000–231,100 TBM8750 0.770 0.766 0.629 50
M250-PS-Q 250 MCM 231,100–300,000 TBM8750 1.063 0.926 0.749 25
N300-PS-X 300 MCM 300,000–380,000 TBM8750 1.125 1.100 0.882 10
P400-PS-X 400 MCM 380,000–478,000 TBM8750 1.250 1.200 0.956 10
R500-PS-V 500 MCM 478,000–600,000 TBM8750 1.438 1.330 1.060 5
The total combined cross sectional area of all wires must be within the CMA range.
ERG2002
ERG2002
ERG2005
WT115A
ERG2005
WT115A
TBM8-750M-1
Nylon-Insulated Parallel Splices
F-20
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Wire Joints
Terminal Products and Tools
Twist wires, insert through
serrated barrel of wire
joint. (PT60M, PT70,
PT70M, PT80).
Crimp and trim off excess
wire with WT161M
hand tool.
Screw PT6 insulator firmly
onto PT160M barrel.
B
A
T&B
B
A
T&B
B
A
PT Series Crimp-On Wire Joints
Installation Procedure for “PT” Connectors
PKG. WIRE RANGE REC. DIMENSIONS
CAT. NO.
QTY. MIN. MAX. TOOL A B
PT66M 100 2#18 3#12 combination WT161M .50 .93
PT6M 100 Insulator only WT161M .50 .93
PT60M 100 2#14 3#12 connector only WT161M .31 .37
PT70 200 2#14 3#12 WT161M .29 .34
PT70M 200 3#18 4#12 WT161M .31 .37
PT80 50 2#16 4#10 WT161M .35 .62
WT161M
ALLOWABLE WIRE COMBINATIONS
CAT. NO.
#22 #20 #18 #16 #14 #12 #10
2–3
1–2 2
3
3
31
RB4/RB44 23
1–2 2
21
31
12
21
12
ALLOWABLE WIRE COMBINATIONS
CAT. NO.
#22 #20 #18 #16 #14 #12 #10
1–4 1
1–3 1
1–2 1
2
3–5 1
2–4 1
RC6/RC55 3
1–4 2
1–3 2
1–3 3
13
2
5
4–6
ALLOWABLE WIRE COMBINATIONS
CAT. NO.
#22 #20 #18 #16 #14 #12 #10
2
11
11
2–4
2–4 1
RP7/RP12 1–3 2
13
3–6
1 2–3
2 1–2
31
2
41
B
A
One-Piece
Non-insulated
High Temperature
Wire Joints
PKG. WIRE RANGE REC. DIMENSIONS
CAT. NO.
QTY. MIN. MAX. TOOL A B
RB4-HT 1,000 2#18 2#16 WT2000 .36" .82"
RC6-HT 500 3#16 3#14 ERG2001 .48" .95"
RP7-HT 500 3#14 3#12 WT2130A .53" 1.00"
Rated for temperatures up to 150˚ C
(302˚ F), 600V maximum
Molded, one-piece nylon construction
for electrical insulation, UL94-V2
Brazed copper sleeve prevents separation
of connection during crimping
Internal serrations enable cold flow for
increased conductivity and pull-out strength
Two-Piece
Nylon insulator
Crimp-On Wire Joints, One-
Piece Nylon Self-Insulated
F-21
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
PKG. WIRE RANGE REC. DIMENSIONS
CAT. NO.
QTY. MIN. MAX. TOOL A B
RB44 100 2#18 2#16 WT2000 .31 .78
RB4-TB 1,000 2#18 2#16 WT2000 .31 .78
RC55 50 4#18 2#12 WT2130A .43 .95
RC6 500 4#18 2#12 WT2130A .43 3
RP12 100 3#14 4#12 WT2130A .53 1.00
RP7 1,000 3#14 4#12 WT2130A .53 1.00
WT2000
WT2130A
Terminal Products and Tools
Heat-Shrinkable Terminals, Splices and Disconnects
Heat-Shrinkable Locking Fork Terminals
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RAS18-6FLX 100 22–18 .170 #6 1.350 .25
RAS18-8FLX 100 22–18 .170 #8 1.350 .29
RAS18-10FLX 100 22–18 .170 #10 1.350 .29
RBS14-6FLX 100 16–14 .200 #6 1.350 .25
RBS14-8FLX 100 16–14 .200 #8 1.350 .29
RBS14-10FLX 100 16–14 .200 #10 1.350 .29
RCS10-6FLX 50 12–10 .250 #6 1.350 .31
RCS10-8FLX 50 12–10 .250 #8 1.350 .37
RCS10-10FLX 50 12–10 .250 #10 1.350 .37
RCS10-14FLX 50 12–10 .250 14" 1.350 .49
ERG1255
The heat shrinkable advantage!
These ring terminals, butt splices
and disconnects are self-insulated
with heat-shrinkable polyolefin
and internally coated sealant
Self-insulated with heat-shrinkable
polyolefin and internally coated sealant
Upon completed installation, a
fully sealed connection is achieved
to protect the joint against the
degrading effects of galvanic
action, corrosion, and
environmental exposure
PKG. WIRE MAX. BOLT REC. DIMENSIONS STOCK
CAT. NO.
QTY. RANGE INS. HOLE TOOL A B C M THICK.
RAS18-6X 100 22–18 .170 #6 1.23 .25 .27 1.10
RAS18-8X 100 22–18 .170 #8 1.26 .31 .27 1.10 .03
RAS18-10X 100 22–18 .170 #10 1.26 .31 .27 1.10
RBS14-6X 100 16–14 .200 #6 1.23 .25 .27 1.10
RBS14-8X 100 16–14 .200 #8 WT1255 1.23 .25 .27 1.10 .03
RBS14-10X 100 16–14 .200 #10 1.26 .31 .27 1.10
RCS10-6X 50 12–10 .250 #6 1.34 .31 .27 1.15
RCS10-8X 50 12–10 .250 #8 1.34 .37 .27 1.15 .04
RCS10-10X 50 12–10 .250 #10 1.34 .37 .27 1.15
RCS10-14X 50 12–10 .250 14" 1.34 .49 .32 1.15
ERG1255
.03
.03
.04
.04
M
Heat-Shrinkable Ring Terminals
F-22
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
Heat-Shrinkable Terminals, Splices and Disconnects
Heat-Shrinkable Fully Insulated Female Disconnects
PKG. WIRE MAX. TAB REC.
CAT. NO.
QTY. RANGE INS SIZE TOOL A
18RAS-251TX 25 22–18 .170 .250 x .032 WT1255 1.80
14RBS-251TX 25 16–14 .200 .250 x .032 WT1255 1.75
10RCS-251TX 25 12–10 .250 .250 x .032 WT1255 1.80
Heat-Shrinkable Fully Insulated Male Tabs
ERG1255
PKG. WIRE MAX. REC. DIMENSIONS
CAT. NO.
QTY. RANGE INS TOOL A B
2RAS18X 50 22–18 .170 WT1255 1.50 .25
RAAS22X 500 22–18 .170 WT1255 1.50 .25
2RBS14X 50 16–14 .200 WT1255 1.50 .26
RBBS22X 500 16–14 .200 WT1255 1.50 .26
2RCS10X 25 12–10 .250 WT1255 1.60 .31
RCCS22X 250 12–10 .250 WT1255 1.60 .31
Heat-Shrinkable Butt Splices
B
A
ERG1255
Everything you need to make fully
sealed connections in one handy kit.
Heat-Shrink Terminal Kit with Tools
Tools: (1) butane torch; (1) wire stripper; (1) ratchet crimp tool
Butt Splices: (20) 22-18 AWG; (20) 16-14 AWG; (15) 12-10 AWG
Ring Terminals: (20) 16-14 AWG #10 stud;
(2) 16-14 AWG #8 stud; (15) 12-10 AWG 14" stud
PKG. WIRE MAX. TAB REC.
CAT. NO.
QTY. RANGE INS SIZE TOOL A
RAS18-250AX 25 22–18 .170 .250 x .032 WT1255 1.82
RBS14-250AX 25 16–14 .200 .250 x .032 WT1255 1.77
RCS10-250AX 25 12–10 .250 .250 x .032 WT1255 1.80
ERG1255
CAT. NO.
DESCRIPTION STD. PKG.QTY.
STAPOUCH-HS Heat-Shrink Terminal Kit with Tools 1
NEW!
NEW!
A
A
F-23
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Disconnects & Male Tabs
Terminal Products and Tools
Nylon self-insulated
1
Vinyl self-insulated
Nylon fully insulated
Non-insulated
Nylon open top insulated 90° flag
2
3
4
5
6
Fig. 1
Disconnects
250 Series — Female Disconnects
Supplied in a variety of styles to meet virtually
all quick-disconnect requirements
Female disconnect terminals and matching male tabs
accommodate a range of 22–10 AWG, and are available
in non-insulated, partially insulated, and fully insulated
styles, in both nylon and vinyl
Available in various tab widths including .250",
.187" and .110" and a combination size
Unique construction of the female disconnect
offers long-term dependability
Brazed seam serrated barrel provides maximum
tensile strength
187 Series — Female
Disconnects
Quick, reliable method of
connection to terminal blocks
and boards without the use of tools
Supplied in a variety of styles to meet virtually
all quick-disconnect requirements
Female disconnect terminals and matching male tabs
accommodate a range of 22–10 AWG, and are available
in non-insulated, partially insulated, and fully insulated
styles, in both nylon and vinyl
Available in various tab widths including .250",
.187", and .110", and a combination size
Unique construction of the female disconnect
offers long-term dependability
Internal barrel serrations
and long barrel provide
for maximum tensile
strength
Complete line of
installing tools,
engineered to match
tool with terminal
Funnel entry insulators
enable easier inserting
of wire into barrel
Color-coded for
easy installation
A
B
Fig. 2 Fig. 3
A
B
B
A
Non-insulated/insulation grip
Fig. 4
(Continued on facing page)
250 Series — Female Disconnects
F-24
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
CAT.
PKG. WIRE MAX. TAB REC. DIMENSIONS
NO.
QTY. RANGE INS. SIZE FIG. TOOL A B
RA18-250F 100 22–18 .136 .250 x .032 1 EGR2001 .91 .29
RA250 1,000 22–18 .136 .250 x .032 1 EGR2001 .91 .29
RB14-250F 100 16–14 .162 .250 x .032 1 EGR2001 .91 .29
RB250 1,000 16–14 .162 .250 x .032 1 EGR2001 .91 .29
RC10-250F 50 12–10 .215 .250 x .032 1 EGR2001 1.04 .29
RC250 500 12–10 .215 .250 x .032 1 EGR2001 1.04 .29
18RA-250F 100 22–18 .150 .250 x .032 1 EGR2001 .96 .29
RA257 1,000 22–18 .150 .250 x .032 1 EGR2001 .96 .29
RA257-170 1,000 22–18 .170 .250 x .032 1 EGR2001 .96 .29
14RB-250F 100 16–14 .170 .250 x .032 1 EGR2001 .96 .29
RB257 1,000 16–14 .170 .250 x .032 1 EGR2001 .96 .29
RB257-200 1,000 16–14 .200 .250 x .032 1 EGR2001 .96 .29
10RC-250F 50 12–10 .250 .250 x .032 1 EGR2001 1.03 .29
RC257 500 12–10 .250 .250 x .032 1 EGR2001 1.03 .29
18RA-2577 100 22–18 .165 .250 x .032 2 EGR2001 1.01 .38
RA2573 1,000 22–18 .165 .250 x .032 2 EGR2001 1.01 .38
14RB-2577 100 16–14 .185 .250 x .032 2 EGR2001 1.01 .38
RB2573 1,000 16–14 .185 .250 x .032 2 EGR2001 1.01 .38
10RC-2577 50 12–10 .225 .250 x .032 2 EGR2001 1.04 .38
RC2573 500 12–10 .225 .250 x .032 2 EGR2001 1.04 .38
RA18-250A 50 22–18 .170 .250 x .032 3 EGR2001 .80 .71
RA2577F 500 22–18 .170 .250 x .032 3 EGR2001 .80 .71
RB14-250A 50 16–14 .190 .250 x .032 3 EGR2001 .80 .72
RB2577F 500 16–14 .190 .250 x .032 3 EGR2001 .80 .72
RC10-250A 50 12–10 .245 .250 x .032 3 EGR2001 .80 .88
RC2577F 500 12–10 .245 .250 x .032 3 EGR2001 .80 .88
A18-250 100 22–18 .250 x .032 1 EGR2002 .73 .31
A250 1,000 22–18 .250 x .032 1 EGR2002 .73 .31
B14-250 100 16–14 .250 x .032 1 EGR2002 .73 .31
B250 1,000 16–14 .250 x .032 1 EGR2002 .73 .31
C10-250F 50 12–10 .250 x .032 1 EGR2002 .73 .31
C250 500 12–10 .250 x .032 1 EGR2002 .73 .31
B14-250F 100 16–14 .250 x .032 4 WT110M .87 .31
B250G 1,000 16–14 .250 x .032 4 WT110M .87 .31
1
2
3
4
5
6
ERG2001
ERG2002
WT110M
Disconnects & Male Tabs
Terminal Products and Tools
B
C
30
O
A
250 Series — Female Disconnects
(continued)
250 Series — Piggy Back Disconnects
187 Series — Female Disconnects
Non-insulated
90° flag
Nylon self-insulated
1
Vinyl self-insulated
Nylon fully insulated
Non-insulated
Nylon fully insulated 90° flag
2
3
4
5
7
CAT.
PKG. WIRE MAX. TAB REC. DIMENSIONS
NO.
QTY. RANGE INS. SIZE FIG. TOOL A B
RAD18-183 100 22–18 .136 .187 x .032 1 .83 .23
RAD1833 1,000 22–18 .136 .187 x .032 1 .83 .23
RAD18-182 100 22–18 .136 .187 x .020 1 .83 .23
RAD1823 1,000 22–18 .136 .187 x .020 1 .83 .23
RBD14-183 100 16–14 .163 .187 x .032 1 .83 .23
RBD1833 1,000 16–14 .163 .187 x .032 1 .83 .23
RBD14-182 100 16–14 .163 .187 x .020 1 .83 .23
RBD1823 1,000 16–14 .163 .187 x .020 1 .83 .23
18RAD-183 100 22–18 .150 .187 x .032 1 .85 .23
RAD1837 1,000 22–18 .150 .187 x .032 1 .85 .23
18RAD-182 100 22–18 .150 .187 x .020 1 .85 .23
RAD1827 1,000 22–18 .150 .187 x .020 1 .85 .23
14RBD-183 100 16–14 .170 .187 x .032 1 .85 .23
RBD1837 1,000 16–14 .170 .187 x .032 1 .85 .23
14RBD-182 100 16–14 .170 .187 x .020 1 .85 .23
RBD1827 1,000 16–14 .170 .187 x .020 1 .85 .23
18RAD-18377 100 22–18 .150 .187 x .032 2 .89 .30
RAD18377 1,000 22–18 .150 .187 x .032 2 .89 .30
18RAD-18277 100 22–18 .150 .187 x .020 2 .89 .30
RAD18277 1,000 22–18 .150 .187 x .020 2 .89 .30
14RBD-18377 100 16–14 .170 .187 x .032 2 .89 .30
RBD18377 1,000 16–14 .170 .187 x .032 2 .89 .30
14RBD-18277 100 16–14 .170 .187 x .020 2 .89 .30
RBD18277 1,000 16–14 .170 .187 x .020 2 .89 .30
AD18-183 100 22–18 .187 x .032 1 .64 .23
AD183 1,000 22–18 .187 x .032 1 .64 .23
AD18-182 100 22–18 .187 x .020 1 .64 .23
AD182 1,000 22–18 .187 x .020 1 .64 .23
BD14-183 100 16–14 .187 x .032 1 .64 .23
BD183 1,000 16–14 .187 x .032 1 .64 .23
BD14-182 100 16–14 .187 x .020 1 .64 .23
RAD18-187A 50 22–18 .150 .187 x .032 3 .74 .59
RAD1877F 500 22–18 .150 .187 x .032 3 .74 .59
RAD18-188A 50 22–18 .150 .187 x .020 3 .74 .59
RAD1887F 500 22–18 .150 .187 x .020 3 .74 .59
RBD14-187A 50 16–14 .170 .187 x .032 3 .74 .61
RBD1877F 500 16–14 .170 .187 x .032 3 .74 .61
RBD14-188A 50 16–14 .170 .187 x .020 3 .74 .61
RBD1887F 500 16–14 .170 .187 x .020 3 .74 .61
U.L. Listed E66716
1
2
3
4
5
7
CAT.
PKG. WIRE MAX. TAB REC. DIMENSIONS
NO.
QTY. RANGE INS. SIZE TOOL A B C
RA18-250FP 100 22–18 .136 .250 x .032 WT112M .87 .30 .43
RA250P 1,000 22–18 .136 .250 x .032 WT112M .87 .30 .43
RB14-250FP 100 16–14 .163 .250 x .032 WT112M .87 .30 .43
RB250P 1,000 16–14 .163 .250 x .032 WT112M .87 .30 .43
ERG2001
ERG2002
ERG2001
WT112M
ERG2001
CAT.
PKG. WIRE MAX. TAB REC. DIMENSIONS
NO.
QTY. RANGE INS. SIZE FIG. TOOL A B
A18-250A 50 22–18 .250 x .032 3 EGR2002 .58 .61
A252G 500 22–18 .250 x .032 3 EGR2002 .58 .61
B14-250A 50 16–14 .250 x .032 3 EGR2002 .58 .62
B252G 500 16–14 .250 x .032 3 EGR2002 .58 .62
C10-250A 50 12–10 .250 x .032 3 EGR2002 .64 .63
C252G 500 12–10 .250 x .032 3 EGR2002 .64 .63
ERG2002
ERG2002
ERG2005
Fig. 1
A
B
Fig. 2 Fig. 3
A
B
B
A
F-25
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Disconnects & Male Tabs
Terminal Products and Tools
Select the tabs you need!
Vinyl self-insulated
250 Series — Male Tabs
187 Series — Male Tabs
1
Nylon fully insulated
Non-insulated/insulated Grip
Vinyl insulated
Non-insulated
2
3
4
5
CAT.
PKG. WIRE MAX. TAB REC. DIMENSIONS
NO.
QTY. RANGE INS. SIZE TOOL A B
18RA-250T 100 22–18 .150 .250 x .032 ERG2001 .95
RA2517 1,000 22–18 .150 .250 x .032 ERG2001 .95
14RB-250T 100 16–14 .170 .250 x .032 ERG2001 .95
RB2517 1,000 16–14 .170 .250 x .032 ERG2001 .95
10RC-250T 50 12–10 .250 .250 x .032 ERG2001 1.08
RC2517 500 12–10 .250 .250 x .032 ERG2001 1.08
18RA-251T 50 22–18 .150 .250 x .032 ERG2001 1.13 .45
RA25177 500 22–18 .150 .250 x .032 ERG2001 1.13 .45
14RB-251T 50 16–14 .170 .250 x .032 ERG2001 1.13 .45
RB25177 500 16–14 .170 .250 x .032 ERG2001 1.13 .45
10RC-251T 25 12–10 .210 .250 x .032 ERG2001 1.17 .45
RC25177 500 12–10 .210 .250 x .032 ERG2001 1.17 .45
A18-250T 100 22–18 .250 x .032 WT110M .87
B14-250T 100 20-14 .250 x .032 WT110M .87
A18-251T 100 22–18 .250 x .032 ERG2002 .68
A251 1,000 22–18 .250 x .032 ERG2002 .68
B14-251T 100 16–14 .250 x .032 ERG2002 .68
B251 1,000 16–14 .250 x .032 ERG2002 .68
C10-251T 50 12–10 .250 x .032 ERG2002 .68
CAT.
PKG. TAB WIRE MAX REC. DIA.
NO.
QTY. SIZE RANGE INS. TOOL A B
18RAD-187 100 .187 x .032 22–18 .150 EGR2001 .87
18RAD-188 100 .187 x .020 22–18 .150 EGR2001 .87
14RBD-187 100 .187 x .032 16–14 .170 EGR2001 .87
14RBD-188 100 .187 x .020 16–14 .170 EGR2001 .87
1
2
3
4
5
ERG2001
WT110M
ERG2002
ERG2001
F-26
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Disconnects & Male Tabs
Terminal Products and Tools
B
A
A
B
Insulated coupler requires no tool!
Picture shows wristlock disconnect assembled
as two pieces. Parts are sold by the piece not
by assemblies.
Choose from nylon-insulated or non-insulated!
250 Series — Adapters and Coupler
Non-insulated
Insulated coupler
6
7
Available in variety of wire ranges!
Nylon-insulated
110 Series —
Disconnects*
Wristlock Disconnects
8
Nylon-Insulated Wristlock Disconnects
Non-Insulated Wristlock Disconnects
10
11
CAT.
PKG. TAB WIRE MAX REC. DIMENSIONS
NO.
QTY. SIZE RANGE INS. TOOL A B
RA18-110F 100 .110 x .032 22–18 .110 WT465 .75 .15
RA10-SK 1,000 .110 x .032 22–18 .110 WT465 .75 .15
RA18-111F 100 .110 x .020 22–18 .110 WT465 .75 .15
RA11 1,000 .110 x .020 22–18 .110 WT465 .75 .15
RB14-110F 100 .110 x .032 16–14 .135 WT465 .75 .15
RB10-SK 1,000 .110 x .032 16–14 .135 WT465 .75 .15
RB14-111F 100 .110 x .020 16–14 .135 WT465 .75 .15
RB11-TB 1,000 .110 x .020 16–14 .135 WT465 .75 .15
A18-110F 100 .110 x .032 22–18 WT111M .59 .15
A10-TB 1,000 .110 x .032 22–18 WT111M .59 .15
A18-111F 100 .110 x .020 22–18 WT111M .59 .15
A11 1,000 .110 x .020 22–18 WT111M .59 .15
B14-110F 100 .110 x .032 16–14 WT111M .59 .15
B10-TB 1,000 .110 x .032 16–14 WT111M .59 .15
B14-111F 100 .110 x .020 16–14 WT111M .59 .15
B11-TB 1,000 .110 x .020 16–14 WT111M .59 .15
*Not UL Listed or CSA approved.
CAT.
PKG. WIRE MAX. REC. DIMENSIONS
NO.
QTY. RANGE INS. TOOL A A1
RA18D 50 22–18 .136 WT2000 .99 1.70
RA23 1,000 22–18 .136 WT2000 .99 1.70
RB14D 50 16–14 .162 WT2000 .99 1.70
RB23 1,000 16–14 .162 WT2000 .99 1.70
B14-D 50 16–14 .187 WT110M .97 1.66
B23 1,000 16–14 .187 WT110M .97 1.66
Not UL Listed
CAT.
PKG. TAB DIMENSIONS
NO.
QTY. SIZE A B
F250TA 50 .250 x .032 .82 .56
FTA250 1,000 .250 x .032 .82 .56
RB14-250 50 .250 x .032 2.35 .51
RBB250 500 .250 x .032 2.35 .51
Not UL Listed
Cat. No. F250TA — Material: brass Finish: tin plated
Cat. No. RB14-250 — Material: brass Finish: none Insulation: vinyl
9
10
11
8
6
7
ERG2006
WT111M
ERG2002
WT2000
WT110M
Non-insulated
9
F-27
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Disconnects & Male Tabs
Terminal Products and Tools
F-28
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Continuously molded for high-productivity, jam-free automation!
Plastic Strip Terminals
WIRE RANGE TAB SIZE
CAT. NO. (AWG) (IN.) PKG. QTY.
Male Quick Disconnects
RA250T-PS 22–16 .250 x .032 2,500
RB250T-PS 16–14 .250 x .032 2,500
RC250T-PS 12–10 .250 x .032 2,000
Female Quick Disconnects
RA111D-PS 22–16 .110 x .020 2,500
RA110D-PS 22–16 .110 x .032 2,500
RA188D-PS 22–16 .187 x .020 2,500
RA187D-PS 22–16 .187 x .032 2,500
RA250D-PS 22–16 .250 x .032 2,500
RB188D-PS 16–14 .187 x .020 2,500
RB111D-PS 16–14 .110 x .020 2,500
RB110D-PS 16–14 .110 x .032 2,500
RB187D-PS 16–14 .187 x .032 2,500
RB250D-PS 16–14 .250 x .032 2,500
RC250D-PS 12–10 .250 x .032 2,000
Female Quick Disconnects — Fully Insulated
RA250DF-PS 22–16 .250 x .032 2,500
RB250DF-PS 16–14 .250 x .032 2,500
RC250DF-PS 12–10 .250 x .032 2,000
Thomas & Betts has been an innovator in terminal design since it
invented the first tool-applied, solderless terminals and connectors
in the early 1930s. Continuing that tradition of innovation today, this
latest addition to the Sta-Kon®family of terminal products offers
OEMs a high-performance line of disconnects with nylon
insulation in a stable, consistent, continuously
molded form for high-productivity
automated termination.
Nylon Insulation Material
UL94V-2 flammability rating
Withstands operating temperatures to 105˚ C
Chemical, impact and abrasion resistant
Continuously Molded for Stable, High-Volume Production
Reduces costly downtime — won’t jam equipment and tooling
like Mylar-tape systems
More consistent in form than welded-together plastic strips
The Quality of the Original Sta-Kon®Quick Disconnect
Funnel-entry insulator eliminates hang-ups for faster,
easier wire insertion
Internal barrel serrations increase
conductivity and pull-out strength
Sleeved barrel prevents the
separation that can diminish
both pull-out strength and
dielectric performance
600V maximum
cULus Listed
For tooling, refer
to page F-38.
NEW!
NEW!
Disconnects & Male Tabs
Terminal Products and Tools
F-29
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Faster, easier and safer than manual seating of disconnects!
Disconnect Installation Tool
CAT. NO.
DESCRIPTION PKG. QTY.
Bulk Packaging for OEMs
LD2-D 2-Pole Luminaire Disconnect 500
LD3-D 3-Pole Luminaire Disconnect 500
Kits for Servicing Electricians (includes two male/line half and two female/load half
of the luminaire disconnect polybagged with installation instructions)
LD2 2-Pole Luminaire Disconnect Kit 20
LD3 3-Pole Luminaire Disconnect Kit 20
CAT. NO.
DESCRIPTION PKG. QTY.
DT22-10 Sta-Kon®Disconnect Installation Tool 1
Luminaire Disconnects
Meets 2008 UL requirements for
fluorescent fixtures and ballasts!
Oversized electrical contacts improve conductivity
and reduce temperature rise
Integral wire leads ease installation — even with multiple
wire sizes — and support connection to copper or
aluminum wiring
Foolproof design ensures mating halves of disconnect
are installed correctly, preventing reverse polarization
Finger-safe line side protects installer and enables safe
servicing without disconnecting power
Line and load indications clearly identified on each half
Rounded, compact design fits in tight spaces
Bright orange for instant identification as a safety device
Housing: Polycarbonate
Contacts: Tin-plated brass
Integral Leads: Insulated 18 AWG
solid copper
Temp. Rating: 105˚ C
Flammability: UL94V-2
(V-0 available on request)
Electrical Rating: 4A, 600V
Standards: UL Listed, CSA Certified,
NEC®Section 410.130(G)
2008 edition compliant
Perfect for wire-harness assemblers
and panel builders
Dual-ended with slots to fit red
and blue (male and female) or
yellow disconnects
Color-coded dots for easy matching
of disconnect with correct tool end
Lightweight and only 518" long —
fits in a shirt pocket like a pen
This one-of-a-kind tool may be used to seat all sizes
of Thomas & Betts disconnects.
NEW!
NEW!
. . . . . . . . . Specifications . . . . . . . . . . .
Insulated Ferrules
Terminal Products and Tools
CONDUCTOR SECTION DIMENSIONS INCHES/MM INSTALLATION PKG.
CAT. NO.
AWG MM2 COLOR A B ØC ØD E TOOLING QTY.
F4004 26 0.14 Gray .413/10.5 .236/6.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4005 26 0.14 Gray .492/12.5 .315/8.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4006 24 0.25 Yellow .413/10.5 .236/6.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4007 24 0.25 Yellow .492/12.5 .315/8.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4008 22 0.34 Purple .413/10.5 .236/6.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4009 22 0.34 Purple .492/12.5 .315/8.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F2020 20 0.50 White .453/11.5 .236/6.0 .043/1.1 .098/2.5 .006/0.15 T1, T3 & ERG2 500
F2021 20 0.50 White .531/13.5 .315/8.0 .043/1.1 .098/2.5 .006/0.15 T1, T3 & ERG2 500
F2022 20 0.50 White .610/15.5 .394/10.0 .043/1.1 .098/2.5 .006/0.15 T1, T3 & ERG2 500
F2023 18 0.75 Gray .472/12.0 .236/6.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2024 18 0.75 Gray .551/14.0 .315/8.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2025 18 0.75 Gray .630/16.0 .394/10.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2026 18 0.75 Gray .709/18.0 .472/12.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2027 18 1.00 Red .492/12.5 .236/6.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2028 18 1.00 Red .571/14.5 .315/8.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2029 18 1.00 Red .650/16.5 .394/10.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2030 18 1.00 Red .728/18.5 .472/12.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2031 16 1.50 Black .571/14.5 .315/8.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2032 16 1.50 Black .650/16.5 .394/10.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2033 16 1.50 Black .728/18.5 .472/12.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2034 16 1.50 Black .965/24.5 .708/18.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2035 14 2.50 Blue .591/15.0 .315/8.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F2036 14 2.50 Blue .748/19.0 .472/12.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F2037 14 2.50 Blue .984/25.0 .708/18.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F2038 12 4.00 Gray .889/17.5 .394/10.0 .114/2.9 .189/4.8 .008/0.20 T3 & ERG2 500
F2039 12 4.00 Gray .787/20.0 .472/12.0 .114/2.9 .189/4.8 .008/0.20 T3 & ERG2 500
F2040 12 4.00 Gray 1.024/26.0 .708/18.0 .114/2.9 .189/4.8 .008/0.20 T3 & ERG2 100
F2041 10 6.00 Yellow .787/20.0 .472/12.0 .142/3.6 .244/6.2 .008/0.20 T3 & ERG2 100
F2042 10 6.00 Yellow .984/25.0 .708/18.0 .142/3.6 .244/6.2 .008/0.20 T3 & ERG2 100
F2043 8 10.00 Red .827/21.0 .472/12.0 .181/4.6 .295/7.5 .008/0.20 T3 & ERG2 100
F2044 8 10.00 Red 1.063/27.0 .708/18.0 .181/4.6 .295/7.5 .008/0.20 T3 & ERG2 100
F2045 6 16.00 Blue .906/23.0 .472/12.0 .236/6.0 .346/8.8 .008/0.20 ERG2 100
F2046 6 16.00 Blue 1.142/29.0 .708/18.0 .236/6.0 .346/8.8 .008/0.20 ERG2 50
F2047 4 25.00 Yellow 1.142/29.0 .630/18.0 .295/7.5 .433/11.0 .008/0.20 ERG2 50
F2048 4 25.00 Yellow 1.220/31.0 .708/18.0 .295/7.5 .433/11.0 .008/0.20 ERG2 50
F2049 4 25.00 Yellow 1.378/35.0 .866/22.0 .295/7.5 .433/11.0 .008/0.20 ERG2 50
F2050 2 35.00 Red 1.181/30.0 .630/16.0 .335/8.5 .492/12.5 .008/0.20 ERG2 50
F2051 2 35.00 Red 1.260/32.0 .708/18.0 .335/8.5 .492/12.5 .008/0.20 ERG2 50
F2052 2 35.00 Red 1.535/39.0 .984/25.0 .335/8.5 .492/12.5 .008/0.20 ERG2 50
F2053 1/0 50.00 Blue 1.417/36.0 .787/20.0 .413/10.5 .591/15.0 .014/0.35 ERG2 50
F2054 1/0 50.00 Blue 1.614/41.0 .984/25.0 .413/10.5 .591/15.0 .014/0.35 ERG2 50
Ferrule Dimensions conform to DIN 46228. Part 4.
Gray
Yellow
Purple
White
Gray
Red
Black
Blue
Gray
Yellow
Red
Blue
Yellow
Red
Blue
Insulated Ferrules
Ferrules are the preferred alternative
to twisting wire stands or tinning the
wire end before terminating into a
terminal block
Ferrules are thin-walled copper
tubes, which are mechanically
crimped onto the ends of
stranded wires
They are easy to use — simply strip
the wire, slide the ferrule onto the
end of the wire and crimp
Features
Ferrules ensure reliable electrical
connections when terminating
conductors in screw clamp
terminal blocks
Fraying and breaking of wire
strands is prevented and the
possibility of an unreliable
connection is minimized
Insulated ferrules prevent conductor
breakage due to bending, wire
stress, or vibration, while facilitating
wire insertions into the terminal
block clamp
How to Apply a Ferrule
Strip the insulation from the end of the wire and insert
into the insulated end of the ferrule
Using the designated crimping tool, place the metal shaft
into the tool’s appropriate slot. Compress the tool to make
a crescent-shape depression along the length of the ferrule
Insert the crimped ferrule into the terminal block
Tighten the ferrule and wire into the terminal block
Materials
High conductivity copper
Tin plating
Meets emerging global standards, requiring wire-to-metric style
terminal block installations be terminated with a “pin” style terminal
Available in vinyl insulated, nylon insulated, and non-insulated styles
All styles offered in 22 AWG to 10 AWG and compatible
with existing Sta-Kon®tooling
F-30
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
CONDUCTOR SECTION DIMENSIONS INCHES/MM INSTALLATION PKG.
CAT. NO.
STYLE AWG MM COLOR A B ØC ØD E TOOLING QTY.
F4000 OLD DIN 20 0.50 Orange .571/14.5 .315/8.0 .043/1.1 .102/2.6 .006/0.15 T1, T3 & ERG2 500
F4001 OLD DIN 18 0.75 White .571/14.5 .315/8.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F4002 OLD DIN 18-17 1.00 Yellow .571/14.5 .315/8.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F4003 OLD DIN 16 1.50 Red .571/14.5 .315/8.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F4020 OLD DIN 14 2.50 Blue .571/14.5 .315/8.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F4021 FRENCH 20 0.50 White .571/14.5 .315/8.0 .043/1.1 .102/2.6 .006/0.15 T1, T3 & ERG2 500
F4023 FRENCH 18 0.75 Lt. Blue .571/14.5 .315/8.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F4024 FRENCH 18-17 1.00 Red .571/14.5 .315/8.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F4027 FRENCH 16 1.50 Black .571/14.5 .315/8.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F4028 FRENCH 14 2.50 .571/14.5 .315/8.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
Ferrule Dimensions conform to DIN 46228. Part 4.
CAT. NO.
DESCRIPTION PKG. QTY.
T1 Sta-Kon®Crimp Tool for Wire Ferrules #20-14 AWG — Insulated Handle 1
T3 Sta-Kon®Crimp Tool for Wire Ferrules #26-10 AWG — Insulated Handle 1
ERG2 Comfort Crimp®Sta-Kon®Crimp Tool with Shure-Stake®mechanism,
for installing wire ferrules #26-1/0 AWG. 4 interchangeable die sets 1
included. Insulated handle. Packaged in sturdy plastic carrying case.
T1
Insulated Twin Ferrules
Insulated Ferrules (Old DIN
and French Standards)
T3
ERG2
The crimping tools you need!
Tooling for Sta-Kon®Insulated Ferrules
Orange
White
Yellow
Red
Blue
White
Lt. Blue
Red
Black
Gray
Insulated Ferrules
CONDUCTOR SECTION DIMENSIONS INCHES/MM INSTALLATION PKG.
CAT. NO.
AWG MM COLOR A B ØC ØD E TOOLING QTY.
F8000 2x 20 2x 0.50 White .591/15.0 .315/8.0 .059/1.5 .177/4.5 .010/0.25 T3 500
F8001 2x 18 2x 0.75 Gray .591/15.0 .315/8.0 .071/1.8 .201/5.1 .010/0.25 T3 500
F8002 2x 18 2x 0.75 Gray .669/17.0 .394/10.0 .071/1.8 .201/5.1 .006/0.15 T3 500
F8003 2x 17 2x 1.00 Red .591/15.0 .315/8.0 .081/2.05 .201/5.1 .006/0.15 T3 500
F8005 2x 17 2x 1.00 Red .669/17.0 .394/10.0 .081/2.05 .201/5.1 .006/0.15 T3 500
F8006 2x 16 2x 1.50 Black .630/16.0 .315/8.0 .091/2.3 .252/6.4 .006/0.15 T3 500
F8007 2x 16 2x 1.50 Black .787/20.0 .472/12.0 .091/2.3 .252/6.4 .006/0.15 T3 500
F8008 2x 14 2x 2.50 Blue .728/18.5 .394/10.0 .114/2.9 .295/7.5 .006/0.15 T3 500
F8009 2x 14 2x 2.50 Blue .846/21.5 .512/13.0 .114/2.9 .295/7.5 .006/0.15 T3 500
F8010 2x 12 2x 4.00 Gray .906/23.0 .472/12.0 .150/3.8 .339/8.6 .006/0.15 ERG2/6MM DIE 100
F8011 2x 10 2x 6.00 Yellow .984/25.0 .551/14.0 .193/4.9 .378/9.6 .008/0.20 ERG2/10MM DIE 100
Ferrule Dimensions conform to DIN 46228. Part 4.
White
Gray
Red
Black
Blue
Gray
Yellow
F-31
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Non-Insulated Ferrules
Terminal Products and Tools
CAT.
CONDUCTOR SECTION DIMENSIONS (INCHES/MM) INSTALLATION PKG.
NO.
AWG MM A C D E TOOLING QTY.
F9000 24 0.25 .196/5 .030/0.75 .067/1.7 .006/0.15 T1, ERG2 T3 1,000
F9001 22 0.5 .236/6 .039/1.0 .083/2.1 .006/0.15 T1, T3, ERG2 1,000
F9002 22 0.5 .394/10 .039/1.0 .083/2.1 .006/0.15 T1, T3, ERG2 1,000
F9003 18 0.75 .236/6 .047/1.2 .091/2.3 .006/0.15 T1, T3, ERG2 1,000
F9004 18 0.75 .394/10 .047/1.2 .091/2.3 .006/0.15 T1, T3, ERG2 1,000
F9005 18 1 .236/6 .055/1.4 .098/2.5 .006/0.15 T1, T3, ERG2 1,000
F9006 18 1 .394/10 .055/1.4 .098/2.5 .006/0.15 T1, T3, ERG2 1,000
F9007 16 1.5 .276/7 .067/1.7 .110/2.8 .006/0.15 T1, T3, ERG2 1,000
F9008 16 1.5 .394/10 .067/1.7 .110/2.8 .006/0.15 T1, T3, ERG2 1,000
F9009 16 1.5 .473/12 .067/1.7 .110/2.8 .006/0.15 T1, T3, ERG2 1,000
F9010 16 1.5 .709/18 .067/1.7 .110/2.8 .006/0.15 T1, T3, ERG2 1,000
F9011 14 2.5 .276/7 .087/2.2 .139/3.4 .006/0.15 T1, T3, ERG2 1,000
F9012 14 2.5 .394/10 .087/2.2 .139/3.4 .006/0.15 T1, T3, ERG2 1,000
F9013 14 2.5 .472/12 .087/2.2 .139/3.4 .006/0.15 T1, T3, ERG2 1,000
F9014 14 2.5 .709/18 .087/2.2 .139/3.4 .006/0.15 T1, T3, ERG2 1,000
F9015 12 4 .354/9 .110/2.8 .158/4 .008/0.2 T3, ERG2 1,000
F9016 12 4 .472/12 .110/2.8 .158/4 .008/0.2 T3, ERG2 1,000
F9017 12 4 .591/15 .110/2.8 .158/4 .008/0.2 T3, ERG2 1,000
F9018 12 4 .709/18 .110/2.8 .158/4 .008/0.2 T3, ERG2 1,000
F9019 10 6 .472/12 .138/3.5 .185/4.7 .008/0.2 T3, ERG2 1,000
F9020 10 6 .591/15 .138/3.5 .185/4.7 .008/0.2 T3, ERG2 1,000
F9021 10 6 .709/18 .138/3.5 .185/4.7 .008/0.2 T3, ERG2 1,000
F9022 8 10 .472/12 .177/4.5 .228/5.8 .008/0.2 ERG2 500
F9023 8 10 .591/15 .177/4.5 .228/5.8 .008/0.2 ERG2 500
F9024 8 10 .709/18 .177/4.5 .228/5.8 .008/0.2 ERG2 500
F9025 6 16 .472/12 .228/5.8 .295/7.5 .008/0.2 ERG2 250
F9026 6 16 .591/15 .228/5.8 .295/7.5 .008/0.2 ERG2 250
F9027 6 16 .709/18 .228/5.8 .295/7.5 .008/0.2 ERG2 250
F9028 6 16 .984/25 .228/5.8 .295/7.5 .008/0.2 ERG2 250
F9029 6 16 1.26/32 .228/5.8 .295/7.5 .008/0.2 ERG2 250
F9030 4 25 .591/15 .287/7.3 .374/9.5 .010/.25 ERG2 100
F9031 4 25 .709/18 .287/7.3 .374/9.5 .010/.25 ERG2 100
F9032 4 25 .984/25 .287/7.3 .374/9.5 .010/.25 ERG2 100
F9033 4 25 1.26/32 .287/7.3 .374/9.5 .010/.25 ERG2 100
F9034 2 35 .709/18 .327/8.3 .433/11 .010/.25 ERG2 100
F9035 2 35 .984/25 .327/8.3 .433/11 .010/.25 ERG2 100
F9036 2 35 1.26/32 .327/8.3 .433/11 .010/.25 ERG2 100
F9037 1/0 50 .709/18 .406/10.3 .512/13 .012/0.3 ERG2 100
F9038 1/0 50 .984/25 .406/10.3 .512/13 .012/0.3 ERG2 100
F9039 1/0 50 1.18/30 .406/10.3 .512/13 .012/0.3 ERG2 100
A
E
DC
Non-Insulated Ferrule
F-32
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Installing Kits
PKG.
CAT. NO.
DESCRIPTION QTY.
STA-ORG Sta-Kon®Sta-Org®Terminal 1
and Splice Organizer Kit
Ideal for contractors, OEMs or any
other user of terminals and splices
Slips in a tool box or sits on your
bench — only 6.6"L x 3" dia.
Bench-mountable (hardware included)
Kit Contents
(1) blue nylon organizer/carrier
(6) see-through nylon canisters
with lids
(20) 12–10 AWG vinyl ring
terminals (Cat. No. 10RC-10)
(25) 18–14 AWG vinyl ring
terminals (Cat. No. 14RB-10)
(15) 12–10 AWG vinyl butt splices
(Cat. No. 2RC-10X)
Lightweight, durable,
nylon construction!
Sta-Kit
Sta-Org®Terminal and
Splice Organizer Kit
Convenient 20-count packaging!
Sta-Kon®Mini-Pack Terminals
CAT.
UNIT PKG. WIRE BOLT
NO.
QTY. QTY. RANGE HOLE
18RA-6FCP 20 100 22–18 #6
18RA-8CP 20 100 22–18 #8
18RA-10CP 20 100 22–18 #10
14RB-6CP 20 100 16–14 #6
14RB-8CP 20 100 16–14 #8
14RB-10CP 20 100 16–14 #10
10RC-10CP 20 100 12–10 #10
10RC-14CP 20 100 12–10 1⁄4
18RA-8FCP 20 100 22–18 #8
18RA-10FCP 20 100 22–18 #10
14RB-6FCP 20 100 16–14 #6
14RB-8FCP 20 100 16–14 #8
14RB-10FCP 20 100 16–14 #10
10RC-8FCP 20 100 12–10 #8
10RC-10FCP 20 100 12–10 10
2RA18XCP 20 100 22–18
2RB14XCP 20 100 16–14
2RC10XCP 20 100 12–10
18RA-250FCP 20 100 22–18
14RB-250FCP 20 100 16–14
10RC-250FCP 20 100 12–10
Wire ranges from 22 AWG to 10 AWG
Vinyl insulated ring and forked-tongued terminals, female
disconnects, butt-type splice connectors
NOTE: “CP” designates mini-pack quantities. Refer to other
catalog pages for description and dimensional information.
Terminal Products and Tools
Perfect for residential or light commercial
installations!
(25) 18–14 AWG vinyl butt
splices (Cat. No. 2RB-14X)
(20) 12–10 AWG vinyl fork
terminals (Cat. No. 10RC-10F)
(25) 18–14 AWG vinyl fork
terminals (Cat. No. 14RB-10F)
PKG.
CAT. NO.
DESCRIPTION QTY.
STAKIT Assortment of Sta-Kon®vinyl terminals, splices and 1
disconnects. Includes crimp tool, cable ties and wire
marker book
Assortment of popular
Sta-Kon®vinyl terminals
Kit includes a WT112M
crimping tool
Includes cable ties
and wire marker book
F-33
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Application Tools
Terminal Products and Tools
WT112M
WT111M
WT110M
WT161M
WT2000
CAT. NO.
DESCRIPTION PKG. QTY.
WT110M A, B, C non-insulated terminal and splices and A, B 1
non-insulated terminals with insulation grip
WT111M A, B, C, PT non-insulated terminal and splices; includes cutters 1
WT112M A, B, C non-insulated and RA, RB, RC insulated nylon 1
and vinyl terminal and splices; includes cutters
WT161M A, B, C, PT non-insulated terminal and splices;
includes plier grip and cutters 1
WT2000 A, B, C, AB, PT, RA, RB, RC insulated and non-insulated
terminal and splices; includes wire cutters, bolt cutters
and wire stripper 1
Used for installation of various
Sta-Kon® terminal series.
Plier Type Tools
Recommended Tools
Plier type if installations are fewer than 20 per day
The Shure-Stake®mechanism on mechanical ratchet tools and power tools prevents the dies
from releasing the terminal until the proper compression has been completed. With this method,
an operator achieves a reliable crimp every time. Thomas & Betts tooling techniques correctly
match tools, wire size, and terminal to produce optimum mechanical and electrical performance.
Power type if installations are more than 200 per day
12050
ERG2001
Ratchet type if installations are more than 20 per day
WT112M
F-34
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Application Tools
Terminal Products and Tools
Concerned about safety? Down time? Health care costs?
The Thomas & Betts ergonomically-designed Comfort Crimp®tool is
designed to help reduce the risk of carpal tunnel syndrome, the cause
of almost one out of every two industrial injuries.
This tool’s unique design delivers the same reliable crimp with up to
60% less handle force than other terminal hand tools, so you won’t have
to sacrifice your hand to make a successful crimp. We’ve researched the
tool components to provide maximum comfort to the operator while
ensuring a complete crimp.
Just wrap your hands around our Comfort Crimp®terminal tool.
It’s such a relief you won’t want to handle any other tool ever again.
For easy visual
verification of crimps,
integrity dots are
embossed on the top
and bottom of the
terminal.
Toggle action increases mechanical
gain, which dramatically reduces
handle force — and the stress on
your hands.
Advanced ergonomic
design of handle
distributes the force
more evenly across
the hand.
Rubberized thermoplastic
handle combines maximum
friction with a soft,
comfortable feel that
reduces muscle tension.
Shure-Stake
®
mechanism
ensures a complete crimp
cycle before it releases
the tool.
Color-coded die nests
on both the right and
left sides of the tool
are included for
insulated terminals.
Ergonomically designed handles let user get a grip on safety.
Comfort Crimp®Terminal Tool
ERG2001
PKG.
CAT. NO.
FOR USE WITH STA-KON®SERIES QTY.
ERG2001 RA, RB, RC Nylon & vinyl terminals, splices & disconnects 1
ERG2002 A, B, C Non-insulated terminals, splices, disconnects 1
ERG2004 A,B and C Flag terminals 1
ERG2005 B, C, D, E Non-insulated terminals, splices, 1
(D & E tubular only)
ERG2006 RA, RB .110 Disconnects and RAX Terminals 1
ERG2007 RD & RE Insulated terminals (tubular only) 1
ERG2008 Non-insulated terminals #8–1/0 AWG (tubular only) 1
ERG2008
ERG2007
ERG2005
ERG2004
ERG2002
NOTE: Contact Tool Services for gauging.
F-35
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Application Tools
Terminal Products and Tools
WT3185 Ratchet Hand Tool
CAT. NO.
FOR USE WITH STA-KON®SERIES PKG. QTY.
WT3185 For 8 AWG to 250 MCM Non-Insulated Sta-Kon®Terminals 1
NOTE: For gauging information, contact Tool Services.
CAT. NO.
FOR USE WITH STA-KON®SERIES PKG. QTY.
WT129 D, E, F & G Non-Insulated Flag Terminals 1
WT129 Flag Terminal Type Hand Tool
WT1377 Ratchet Hand Tool
ERG2006 Hand Tool
WT2130A Ratchet Hand Tool
Correct compression every time — the Shure-Stake®mechanism principle
prevents opening of the handles until full staking action is completed. Installs
self-insulated and non-insulated Sta-Kon®terminal series in the #26–10
AWG wire range.
ERG1255 Ratchet Hand Tool
CAT. NO.
FOR USE WITH STA-KON®SERIES PKG. QTY.
WT1377 NW Ring Terminals 1
CAT. NO.
FOR USE WITH STA-KON®SERIES PKG. QTY.
ERG2006 RZ, RV Terminals/Splices 1
RA, RB .110 insulated disconnects
CAT. NO.
FOR USE WITH STA-KON®SERIES PKG. QTY.
ERG1255 RA, RB, RC Heat-Shrinkable nylon insulated 1
terminals, butt splices, and disconnects
CAT. NO.
FOR USE WITH STA-KON®SERIES PKG. QTY.
WT2130A RC, RBC and RD insulated terminals, 1
RC6, RP7 wire joints
F-36
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Application Tools
Terminal Products and Tools
PKG.
CAT. NO.
FOR USE WITH STA-KON®SERIES QTY.
WT115A D, E, F & G Non-Insulated Terminals 1
WT115A Toggle-Type Hand Tool
Installing Dies for Non-Insulated Code
and Aircraft Sta-Kon
®
Terminals
CAT. NO.
NEST INDENTOR
STATIONARY MOVABLE TERM.
DIE DIE SIZE
11803 D, E (Tubular)
11805 E (Brazed), F (Tubular)
11806 11802 F (Brazed), G
11807 H
11808 J
11809 K
11810 L
11811 M
Installing Dies for Nylon Insulated
Sta-Kon
®
Terminals TBM6 & TM6S Tool
DIE SET
CAT. NO.
TERM. SIZE
11821 RD (Tubular)
11822 RD (Brazed Seam) RE (Tubular)
11823 RF
11824 RG
11825 RH
11826 RJ
11827 RK
11828 RL
11829 RM
TBM6 & TBM6S Toggle-Type
Hand Tools
TBM6
PKG.
CAT. NO.
FOR USE WITH STA-KON®SERIES QTY.
TBM6 D through M, RD through RM 1
TBM6S D through M, RD through RM with Shure-Stake®1
Dies not included
Interchangeable cassettes
enable the user to strip a wide
range of insulations without
having to change tools
Tool automatically strips wire
to preset length
Integral wire cutter lets user
cut and strip with the same tool!
PKG.
CAT. NO.
DESCRIPTION QTY.
ERG1-WS Ergonomic Wire Stripping Tool 1
SBC-1 Replacement Straight Blade Cassette 1
VBC-1 Replacement “V” Blade Cassette 1
ERG1-WS Wire Stripping/Cutting Tool is shipped with one Straight Blade Cassette.
“V” Blade Cassettes sold separately.
“V” Blade Cassette
PKG.
CAT. NO.
DESCRIPTION QTY.
SWS01 Single-Side Stripper 1
DWS02 Double-Side Stripper 1
Single operation to cut
and strip at the same time!
Automatic adjustment to
the diameter of the wire,
with neither setting nor
selection
Sharply cuts and strips
insulator without
damaging the conductors
DWS02 is a double-side stripper
SWS01
DWS02
SWS01/DWS02 Wire
Stripping/Cutting Tools
Sta-Kon®ERG1-WS Wire
Stripping/ Cutting Tool
F-37
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
Safe, fast, high-volume
crimping machine!
Shure-Stake®mechanism
Fully guarded foot pedal
Clear plastic safety guard over
die area
Dies color coded to terminals
#26–10 AWG wire range
Installs insulated and non-insulated
terminals and disconnects
Shure-Stake®Auto-Feed Tool
Application Tools
PKG.
CAT. NO.
DESCRIPTION QTY.
12050 Compact, pneumatically operated unit for crimping tape-mounted STA-KON®terminals; 1
equipped with a Shure-Stake®mechanism, which ensures a full compression each time
Space Requirement: 30" W x 20" H x 20" D
Weight: 55 lbs.
Air Pressure: 90–125 psi input air supply
Installing Dies for 12050
STA-KON®AWG DIE PKG.
TERMINAL TYPE WIRE SIZE CAT. NO. QTY.
RA — NYLON 22–18 12051
RA — VINYL 22–18 12054* 1
RA DISCONNECT 22–18 12061 1
RB — NYLON 16–14 12052 1
RB — VINYL 16–14 12055* 1
RB DISCONNECT 16–14 12062 1
RC — NYLON AND 12–10 12056 1
VINYL INSULATED
A — NON-INSULATED 22–18 12057 1
B — NON-INSULATED 16–14 12058 1
C — NON-INSULATED 12–10 12059 1
C DISCONNECT, NON-INSUL. 12–10 12060 1
RV — RZ 26–24 683-54335 1
*Can also be used on nylon.
F-38
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
WIRE RANGE STD. PKG.
CAT. NO.
DESCRIPTION (AWG) QTY.
EBP22-10 Bench Press for Plastic Strip Terminals 22-10 1
Crimp Dies*
RAH22-16 Red Terminals Die 22-16 1
XBAH16-14 Blue Terminals Die 16-14 1
YAH12-10 Yellow Terminals Die 12-10 1
*Dies sold separately
Tooling for Sta-Kon®
Plastic Strip Terminals NEW!
NEW!
Terminal Products and Tools
Interchangeable dies can
be quickly changed to crimp
non-insulated and insulated
terminals up to 6 AWG
Dies are the same as our hand
tools — crimps will be exactly
the same between Sta-Kon®
hand tools such as our ERG2001
and the new BAT22-6
360° rotating head gives
the user the added flexibility
when crimping hard-to-reach
connections
Short cycle time equates to
crimping times of less than
two seconds
Quick, lightweight,
and maneuverable
NiCd battery operation provides
long-lasting battery life to
complete up to 150 crimps
on a single charge
Extra battery and charger are
included with the tool, ensuring
round-the-clock operation
Battery charger provides full
battery life in under an hour
Linear crimping motion gives
a symmetric, high-quality crimp
every time
Battery-Powered Crimping Tool —
BAT22-6
112tons of grip that weighs
less than 3 pounds!
PKG.
CAT. NO.
DESCRIPTION QTY.
BAT22-6 Battery Crimping Tool, 1.5 Ton with 120 VAC Charger 1
Crimp Dies*
DIE2001 Insulated 22–10 AWG Sta-Kon Terminals 1
DIE2002 Non-Insulated 22–10 AWG Sta-Kon Terminals 1
DIE2005 16–14/12–10/8–6 (Tubular Only) Sta Kon Terminals 1
DIE2007 Insulated 8–6 AWG Sta-Kon Terminals 1
*Dies sold separately.
T&B’s newest battery-powered tool is fast and portable for making high-
volume and difficult-to-reach terminal installations in a snap. The Sta-Kon®
BAT22-6 delivers 1.5 tons of crimping force with an easy, pushbutton
trigger. The lightweight, ergonomic design minimizes the risk of repetitive
motion injuries that can occur with traditional hand crimping tools.
And at less than three pounds, one-hand operation is easy
while still packing enough power to crimp up to
6 AWG terminals in seconds.
Included Accessories
Sturdy, plastic carrying case for portability
Two 9.6V NiCd batteries and battery charger
Sturdy tray for convenient storage of crimp dies
Uses the exact dies of the Comfort Crimp
line of ergonomic tools for Sta-Kon
®
and
Dragon Tooth
®
terminals.
Easy to rotate with your
wrist — delivers fast and
effective crimping power.
Application Tools
NEW!
NEW!
F-39
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
Application Tools
CAT. NO.
DESCRIPTION PKG. QTY.
BAIR22-6 Heavy-duty, high-speed production tool installs a wide range 1
of Sta-Kon®terminals, from 26-6 gauge; uses the ERG2000
series dies for both non-insulated and insulated terminals;
supplied complete with foot pedal, air hose/air lubricator
Crimp Dies*
DIE2001 Insulated 22–10 AWG Sta-Kon Terminals 1
DIE2002 Non-Insulated 22–10 AWG Sta-Kon Terminals 1
DIE2005 Non-Insulated 16–10/8–6 (Tubular Only) Sta-Kon Terminals 1
DIE2007 Insulated 8–6 AWG Sta-Kon Terminals (Tubular Only) 1
* Dies sold separately.
NOTE: The dies for the BAIR22-6, PAIR22-6 and BAT22-6 (page F-37)
are interchangeable.
CAT. NO.
DESCRIPTION PKG. QTY.
PAIR22-6 Open yoke; hand actuated 1
Crimp Dies*
DIE2001 Insulated 22–10 AWG Sta-Kon Terminals 1
DIE2002 Non-Insulated 22–10 AWG Sta-Kon Terminals 1
DIE2005 Non-Insulated 16–10/8–6 (Tubular Only) Sta-Kon Terminals 1
DIE2007 Insulated 8–6 AWG Sta-Kon Terminals (Tubular Only) 1
*
Dies sold separately.
NOTE: The dies for the BAIR22-6, PAIR22-6 and BAT22-6 are interchangeable.
Crimps 22-6 AWG terminals
Portable heavy-duty air tool
Installs Sta-Kon®terminals as well as
ferrules and Dragon Tooth® connectors
Interchangeable dies
Open yoke enables easy access to insert
and remove terminals for crimping
Crimp 22–6 AWG terminals!
1.25 tons of portable force!
BAIR22-6 Bench-Mounted Air Tool
PAIR22-6 Portable Air Hydraulic Tool
1.5 tons of grip
Bench-mounted heavy-duty air tool
Short cycle time
Shure-Stake®mechanism
Foot actuated
Accepts T&B standard hand tool dies
Installs Sta-Kon®and Spec-Kon®terminals
as well as ferrules and Dragon Tooth® connectors
NEW!
NEW!
NEW!
NEW!
F-40
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
Application Tools
Air-Operated Bench-Mounted Tool
CAT. NO.
DESCRIPTION PKG. QTY.
25000 This compact heavy-duty air tool installs nylon 1
insulated Sta-Kon®terminals on wire sizes from
8 AWG to 250 mcm; non-insulated styles are also
installed just as quickly and dependably; Heavy-duty
air tool installs non-insulated and insulated Sta-Kon®
terminals from 8 AWG to 250 mcm
NOTE: This tool uses the same dies as the TBM6 and TBM6S hand tools on page F-35.
Convenience and Economy
The tool accepts a full range of interchangeable dies, the same as used
in the TBM6 or TBM6S tools. To install the dies, simply pull the spring-
loaded pin and remove the indentor die. Then, flex the retaining spring
and remove the die nest.
Shure-Stake®Mechanism Means Quality Connections
The Shure-Stake®mechanism senses inlet air pressure, and
if insufficient, is designed to prevent the tool from cycling.
Thus you avoid “undercrimping.” An 85–90 psi air pressure
source is required.
Safety Features Increase Productivity,
Reduce Downtime
Safety features include a guard over the die area, an
air shutdown switch activated by a slight push with the
finger, and an enclosed foot pedal designed to prevent
unwanted tool operation. In addition, the tool may
be bench-mounted for stability and control. For
convenience when crimping large size terminals
on heavy wire, the head assembly may overhang
the workbench.
Crimps 8 AWG–250 mcm!
F-41
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Application Tools
Terminal Products and Tools
CAT. NO.
DESCRIPTION PKG. QTY.
13400 12-ton crimping tool for installing both insulated and non-insulated Sta-Kon®terminals 1
#8 to 250 mcm (dies ordered separately)
Installs insulated
and non-insulated
Sta-Kon®Terminals!
Military listed and 12 tons
of crimping power!
CAT. NO.
DESCRIPTION PKG. QTY.
13642M Hydraulic-operated 12-ton tool installs #8 through 250 mcm Sta-Kon®1
terminals (dies ordered separately)
DIE CAT. NO.
FOR FOR HEX
TUBULAR BRAZED STA-KON®WIRE DIE
TERM SEAM SIZE SIZE CODE
11732 — D 8 21
11733 D824
11733 — E 6 24
11734 E629
11734 — F 4 29
11735 F433
11736 — G 2-1 37
11737 — H 1/0 42
11738 — J 2/0 45
11739 — K 3/0 50
11740 — L 4/0 54
11771 — M 250 mcm 62
Installing Dies for Insulated Sta-Kon
®
Terminals to Fit 13642M (Military Listed)
Indent Style Dies for Flag Type Sta-Kon
®
Terminals — Use with 13642M and 13400
Indent Style Dies for Sta-Kon
®
Tubular
Non-Insulated Terminals to Fit 13642M
and 13400
** Cat. Nos. 21739, 21740 and 21741 dies must be left
in 13642 head with 21732 indentor when gauging.
Indent Style Dies for Sta-Kon
®
Brazed Seam
Non-Insulated Terminals to Fit 13642M
and 13400
NEST INDENT. STA-KON®WIRE PKG.
CAT. NO. CAT. NO.
SIZE SIZE QTY.
13654 13650 G 2–1 1
13655 13650 H1/01
13656 13650 J2/01
13657 13650 K3/01
13658 13650 L4/01
13659 13650 M 250 mcm 1
NEST INDENT. STA-KON®WIRE PKG.
CAT. NO. CAT. NO.
SIZE SIZE QTY.
13643 D81
13644 13650 E61
13645 F41
NEST INDENT. STA-KON®WIRE PKG.
CAT. NO. CAT. NO.
SIZE SIZE QTY.
21733 D81
21734 21731 E61
21735 F41
21736 G21
21737 H11
21738 21732 J1/01
21739** K 2/0 1
21740** L 3/0 1
21741** M 4/0 1
DIE STA-KON WIRE PKG.
CAT. NO.
SIZE SIZE QTY.
21707M RD 8 1
21708M RE 6 1
21709M RF 4 1
21710M RG 2–1 1
21711M RH 1/0 1
21712M RJ 2/0 1
21713M RK 3/0 1
21714M RL 4/0 1
21715M RM 250 mcm 1
Hex Dies for Non-Insulated Sta-Kon
®
Terminals to Fit 13642M and 13400
12-Ton
Crimping Tool
12-Ton Crimping Tool
(Military Spec. MS25441-1)
13642M
Hex Dies for Non-Insulated Sta-Kon
®
Terminals to Fit 13642M (Military Listed)
DIE STA-KON WIRE PKG.
CAT. NO.
SIZE SIZE QTY.
11781M D81
11782M E 6AN 1
11783M F 4AN 1
11784M G 2AN 1
11785M H 1AN 1
11786M J 1/0AN 1
11787M K 2/0AN 1
11788M L 3/0AN 1
11789M M 4/0AN 1
13650
13650
21731
21732
F-42
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Application Tools
Terminal Products and Tools
13600 Electric
Hydraulic Pump
Designed for use with single-
acting cylinders and tools rated
for 10,000 psi operation
Supplied with metal carrying case
13620 hand switch and 13619
hydraulic hose, both sold separately,
required for operation
CAT. NO.
DESCRIPTION PKG. QTY.
13600 Electric Hydraulic Pump — hand or foot switch and 1
non-metallic hose (sold separately) required for operation
Motor: 12hp, 115V 50–60 Hz, 10 amps
Pumping Capacity:
170 cu. in./min. at 100 psi
32 cu. in./min. at 1,000 psi
25 cu. in./min. at 5,000 psi
18 cu. in./min. at 10,000 psi
Reservoir Volume: 104 cu. in. (.45 gal.)
Basic Pump Dimension: 6" x 8" x 16"
Weight: 25 lbs.
. . . . . . Specifications . . . . . .
CAT. NO.
DESCRIPTION PKG. QTY.
13610A Electric Hydraulic Pump with Shure-Stake®control 1
— hand or foot switch and non-metallic hose
(sold separately) required for operation
Shure-Stake®control
mechanism requires
9,800 psi pump pressure
before recyling to prevent
under-crimping
Designed for use with single-
acting cylinders and tools
rated for 10,000 psi operation
Supplied with metal
carrying case
Motor Rating: 12hp, 115V,
50-60 Hz, 12.5 amps
Pumping Capacity:
170 cu. in./min. at 100 psi
32 cu. in./min. at 1,000 psi
25 cu. in./min. at 5,000 psi
18 cu. in./min. at 10,000 psi
Reservoir Volume: 104 cu. in.
(.45 gal.)
Basic Pump Dimension:
812" x 1012" x 16"
Weight: 35 lbs.
. . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . .
Motor Rating: 112hp, 115V, 60 Hz,
23 amps
Pumping Capacity:
235 cu.in./min. at 200 psi
6 cu.in./min. at 8,000 psi
Reservoir Volume:
462 cu.in./2 gal.
Dimensions (L x W x H):
1034" x 15" x 2034"
Weight: 60 lbs.
. . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . .
13610A Electric Hydraulic Pump
with Shure-Stake®Control
CAT. NO.
DESCRIPTION PKG. QTY.
13810 Heavy-duty electric hydraulic pump with Shure-Stake®1
control — hand or foot switch and non-metallic hose
(sold separately) required for operation
Accessories for the pumps on this page
CAT. NO.
DESCRIPTION PKG. QTY.
You may also need…for 13600
13620 Hand Switch – 10 ft. 1
13589A Foot Switch – 10 ft. 1
13619 10 ft. Non-Metallic Hose 1
13618 20 ft. Non-Metallic Hose 1
13600S “Sled” type stand for 13600 pump 1
You may also need…for 13610A & 13810
13611 Hand Switch — 10 ft. 1
13612 Foot Switch — 10 ft. 1
13619 10 ft. Non-Metallic Hose 1
13618 20 ft. Non-Metallic Hose 1
Designed for perfect crimps every time in heavy-duty OEM applications
Heavy-duty OEM two-stage pump with high flow rate
Shure-Stake®control mechanism requires 9,800 psi pump
pressure before recyling to prevent under-crimping
Requires hand or foot control (sold separately)
13810 Heavy-Duty Electric Hydraulic
Pump with Shure-Stake®Control
F-43
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Die Selection Charts
Terminal Products and Tools
Critical information for determining the products you need!
TERMINAL
TERMINAL TYPE SERIES
WT110M WT111M WT112M WT161M WT2000 ERG2001 ERG2002 ERG2004 ERG2005 ERG2006 ERG1255 WT1377 WT145A
RZZ
Nylon Terminals RA, RAX ••
RB ••
RBC, RC ••
RA ••
Nylon Butt Splices RB ••
RC ••
RAA
Nylon Parallel Splices RBB
RCC
All Nylon Disconnects RA ••
RB ••
(except .110 size) RC ••
Heat Shrinkable RAS
Terminals, Splices, RBS
Disconnects RCS
Vinyl Terminals RA, RAA ••
RB, RBB ••
and Splices RC, RCC, RBC ••
Bare Terminals A,AA ••
B,BB ••
and Splices C,CC ••
RB ••
Wire Joints RC ••
RP ••
PT ••
Hi-Temp Terminals NW-Rings
and Splices NW-Splices
Insulation Grip A
B
.110 Disconnects A,B ••
RA,RB
Flag Terminals AB
C
Tefzel®Terminals RAT, RAAT ••
RBT, RBBT ••
and Splices RCT, RCCT ••
RA ••
Vinyl Disconnects RB ••
RC ••
A••
Bare Disconnects B ••
C ••
Tefzel
®
is a registered trademark of DuPont.
RATCHET HAND
PLIERS ERGONOMIC RATCHET HAND TOOLS TOOLS
F-44
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Die Selection Charts
Terminal Products and Tools
Critical information for determining the products you need!
TERMINAL
TERMINAL TYPE SERIES
WT145C WT2130A DIE2001 DIE2002 DIE2005 12051 12052 12054 12055 12056 12057 12058 12059 12060 683-54335
RZZ
Nylon Terminals RA, RAX ••
RB ••
RBC, RC •••
RA ••
Nylon Butt Splices RB ••
RC •••
RAA
Nylon Parallel Splice RBB
RCC
All Nylon Disconnects RA ••
RB ••
(except .110 size) RC •••
Heat Shrinkable RAS
Terminals, Splices, RBS
Disconnects RCS
Vinyl Terminals RA, RAA ••
RB, RBB ••
and Splices RC, RCC, RBC •••
Bare Terminals A,AA ••
B,BB ••
and Splices C,CC ••
RB
Wire Joints RC
RP
PT
Hi-Temp Terminals NW-Rings
and Splices NW-Splices
Insulation Grip A
B
.110 Disconnects A,B
RA,RB
Flag Terminals AB
C
Tefzel®Terminals RAT, RAAT
RBT, RBBT
and Splices RCT, RCCT
RA ••
Vinyl Disconnects RB ••
RC •••
A••
Bare Disconnects B ••
C ••
Tefzel
®
is a registered trademark of DuPont.
RATCHET HAND BAT22-6 BAIR22-6
TOOLS (CONT.) PAIR22-6 12050 MYLAR TAPE AUTO TOOL
F-45
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Die Selection Charts
Terminal Products and Tools
25000 AIR TOOL 13642M (MS25441-1)
TBM6 — TOGGLE HAND TOOL AND
TBM6S — TOGGLE HAND TOOL 13400 HYDRAULIC TOOL
TERMINAL HAND TOOL DIE CAT. NOS. HEX
DESCRIPTION SERIES TYPE WITH DIES NEST (STATIONARY) INDENTOR (MOVABLE) DIES NEST INDENTOR
D Tubular ERG2005 11803 11802 11781M*13651 13650**
D Tubular ERG2008 11803 11802 11781M*13651 13650**
D Tubular WT3185/WT115A 11803 11802 11732 13651 13650**
D Brazed WT3185/WT115A 11803 11802 11733 13643 13650**
E Tubular ERG2005 11803 11802 1182M 13652 13650**
E Tubular ERG2008 11803 11802 1182M 13652 13650**
E Tubular WT3185/WT115A 11803 11802 11733*13652 13650**
E Brazed WT3185/WT115A 11805 11802 11734 13644 13650**
F Tubular ERG2008 11805 11802 11783 13653 13650**
F Tubular WT3185/WT115A 11805 11802 11734* 13653 13650**
F Brazed WT3185/WT115A 11806 11802 11735 13645 13650**
G Tubular ERG2008 11806 11802 11784M*13654 13650**
G Tubular WT3185/WT115A 11806 11802 11736 13654 13650**
H Tubular ERG2008 11807 11802 11785M*13655 13650**
H Tubular WT3185 11807 11802 11785M*13655 13650**
H Tubular WT3185 11807 11802 11737 13655 13650**
J Tubular WT3185 11808 11802 11786M*13656 13650**
J Tubular WT3185 11808 11802 11738 13656 13650**
K Tubular 11809 11802 11787M*13657 13650**
K Tubular 11809 11802 11739 13657 13650**
L Tubular 11810 11802 11788M*13658 13650**
L Tubular 11810 11802 11740 13658 13650**
M Tubular 11811 11802 11789M*13659 13650**
M Tubular 11811 11802 11771 13659 13650**
RD Tubular ERG2007 11821 (Set) 21707M* (Set)
RD Brazed & Tubular 11822 (Set) 21708M* (Set)
RE Tubular ERG2007 11822 (Set) 21708M* (Set)
RE Brazed 11823 (Set) 21709M* (Set)
RF Tubular 11823 (Set) 21709M* (Set)
RF Brazed 11824 (Set) 21710M* (Set)
RG Tubular 11824 (Set) 21710M* (Set)
RH Tubular 11825 (Set) 21711M* (Set)
RJ Tubular 11826 (Set) 21712M* (Set)
RK Tubular 11827 (Set) 21713M* (Set)
RL Tubular 11828 (Set) 21714M* (Set)
RM Tubular 11829 (Set) 21715M* (Set)
D— WT129 ——21733 21731
E— WT129 ——21734 21731
F— WT129 ——21735 21731
G— WT129 ——21736 21732
H— 21737 21732
J— 21738 21732
K— 21739 21732
L— 21740 21732
M— 21741 21732
* Indicates military listed die.
** To order the military version, suffix the indentor catalog number with an "M" (13650M). Nest catalog number does not change.
Tefzel
®
is a registered trademark of DuPont.
Stud Size and Clearance Hole Chart
STUD SIZE 2 4 6 8 10 14516 38716 125834
Min. hole diam. — in. 0.92 .116 .143 .169 .196 .262 .323 .388 .453 .516 .650 .775
Min. hole diam. — mm 2.337 2.946 3.632 4.292 4.978 6.655 8.204 9.855 11.506 13.106 16.510 19.685
Non-Insulated
Terminals
and Splices
Tefzel®† Nylon
Insulated Terminals
and Splices
Non-Insulated
Flag Terminals
Select the die numbers you need!
F-46
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
NAVY INDIVIDUAL STRANDS WHOLE CONDUCTOR
AWG OR AN SHIPBOARD3NO. DIA. IN. CIR. MIL. AREA DIA. IN. DIA. MM
22 Wire Size
22 3/5 (1) 1 .025 642 .025 .635
22 3/5 (7) 7 .010 703 .030 .762
AN-22* 7 * 704 .032 .813
12(21) 21 .005 525 .028 .711
20 Wire Size
20 1 (1) 1 .032 1,022 .032 .813
20 7 .012 1,024 .036 .914
20 10 .010 1,005 .040 1.016
20 19 .007 1,022 .037 .940
20 26 .006 1,034 .039 .991
AN-20* 7 * 1,119 .040 1.016
1 (7) 7 .013 1,119 .038 .965
1 (10) 10 .010 1,005 .038 .965
1 (26) 26 .006 1,034 .042 1.067
18 Wire Size
18 112(1) 1 .040 1,624 .040 1.016
18 112(7) 7 .016 1,624 .049 1.245
18 112(16) 16 .010 1,608 .049 1.245
18 19 .009 1,624 .046 1.168
18 112(41) 41 .006 1,630 .049 1.245
AN-18* 2 (7) 7 .016 1,779 .048 1.219
16 Wire Size
16 212(1) 1 .051 2,583 .051 1.295
16 7 .019 2,583 .058 1.473
16 19 .012 2,601 .058 1.473
16 26 .010 2,613 .059 1.499
16 65 .006 2,580 .058 1.473
AN-16* 212(19) 19 .011 2,407 .061 1.549
212(26) 26 .010 2,613 .061 1.549
14 Wire Size
14 1 .064 4,107 .064 1.626
14 7 .024 4,107 .073 1.854
14 19 .015 4,107 .074 1.880
14 37 .011 4,107 .074 1.880
14 14 .009 4,157 .083 2.108
14 104 .006 4,128 .074 1.880
AN-14* 19 * 3,830 .076 1.930
3 (7) 7 .020 2,828 .060 1.524
3 (19) 19 .013 3,036 .063 1.600
4 (1) 1 .064 4,107 .064 1.626
4 (7) 7 .025 4,497 .076 1.930
4 (19) 19 .014 3,828 .072 1.829
4 (41) 41 .010 4,121 .077 1.956
12 Wire Size
12 1 .081 6,530 .081 2.057
12 7 .031 6,530 .092 2.337
12 19 .019 6,530 .093 2.362
12 37 .013 6,530 .093 2.362
12 49 .012 6,593 .104 2.642
12 65 .010 6,533 .093 2.362
12 104 .008 6,574 .094 2.388
12 165 .006 6,559 .095 2.413
AN-12* 6 (19) 19 .018 6,088 .096 2.438
6 (7) 7 .031 6,512 .092 2.337
6 (65) 65 .010 6,533 .097 2.964
10 Wire Size
10 1 .102 10,380 .102 2.591
10 7 .039 10,380 .116 2.946
10 19 .023 10.380 .117 2.972
10 37 .017 10,443 .117 2.972
10 49 .015 10,445 .131 2.327
10 104 .010 10,452 .116 2.946
AN-10* 37 * 10,380 .117 2.972
9 (7) 7 .036 9,016 .108 2.743
9 (37) 37 .016 9,402 .109 2.769
9 (90) 90 .010 9,045 .120 3.048
* MIL-W-5086. * Strand diameter not specified. 3 MIL-E-16366 A.
RECOMMEND
WIRE STRIP
LENGTH “A
WIRE STRIP TERMINAL STANDARD
LENGTH SERIES TERMINALS
A14
Non-Insulated B 14
C, BC 516
Vinyl Insulated — RA 14
Add 116" for RB 14
Funnel Entry Type RC, RBC 1132
Nylon Insulated RA 732
and Tefzel®RB 732
Insulated RC, RBC 516
RD 1732
RE 1732
RF 916
Nylon Insulated RG 1116
and Tefzel®RH 1116
Insulated RJ 34
when using RK 78
Aircraft and RL 78
Code Wire RM 1
D1532
E1532
F12
Non-Insulated, G 4164
when using H 4364
Aircraft Code Wire J 4764
K5564
L5564
M5964
Tefzel
®
is a registered trademark of DuPont.
Non-Insulated
Vinyl Insulated —
Add 116" for
Funnel Entry Type
Nylon Insulated
and Tefzel®
Insulated
Nylon Insulated
and Tefzel®
Insulated
when using
Aircraft and
Code Wire
Non-Insulated,
when using
Aircraft Code Wire
Wire Guide Tables
A
Wire Strip
Length Chart
F-47
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Wire Guide Tables
Terminal Products and Tools
NAVY INDIVIDUAL STRANDS WHOLE CONDUCTOR
AWG OR AN SHIPBOARD3NO. DIA. IN. CIR. MIL. AREA DIA. IN. DIA. MM
9 Wire Size
9 7 .043 13,090 .130 3.302
14 (7) 7 .045 14,340 .136 3.454
8 Wire Size
8 7 .049 16,510 .146 3.712
8 19 .030 16,510 .148 3.763
8 37 .021 16,510 .148 3.763
7 Wire Size
7 1 .144 20,820 .144 3.662
14 (7) 7 .045 14,340 .136 3.454
14 (140) 140 .010 14,070 .145 3.787
6 Wire Size
6 7 .061 25,250 .184 4.672
6 19 .037 26,250 .186 4.722
6 37 .027 26,250 .186 4.722
6 49 .023 26,146 .208 5.283
6 661 .006 26,274 .259 6.579
5 Wire Size
5 1 .181 33,100 .181 4.595
20 (49) 7x7 .020 19,800 .180 4.570
23 (7) 7 .057 22,800 .171 4.345
23 (228) 19x12 .010 22,190 .190 4.830
26 (49) 7x7 .023 26,250 .210 5.330
4 Wire Size
4 7 .077 41,740 .232 5.891
4 19 .047 41,740 .235 5.967
4 37 .034 41,740 .235 5.967
3 Wire Size
3 1 .229 52,630 .229 5.819
30 (304) 19x16 .010 30,550 .220 5.590
33 (336) 7x48 .010 33,370 .235 5.967
40 (19) 19 .045 38,910 .226 5.742
42 (49) 7x7 .029 41,740 .260 6.600
42 (209) 19x11 .014 42,110 .260 6.600
50 (19) 19 .051 49,080 254 6.452
2 Wire Size
2 7 .097 66,370 .292 7.421
2 19 .059 66,370 .296 7.522
2 37 .042 66,370 .297 7.548
2 49 .037 66,356 .331 8.405
2 133 .022 66,140 .335 8.507
AN-2* 663 * 66,832 .345 8.767
53 (532) 19x28 .010 53,470 .304 7.772
60 (37) 37 .040 60,090 .282 7.161
60 (304) 19x16 .014 61,260 .310 7.870
66 (133) 19x7 .022 66,370 .330 8.380
75 (37) 37 .045 75,780 .317 8.048
1 Wire Size
1 7 .109 83,690 .328 8.333
1 19 .066 83,690 .332 8.431
1 37 .048 83,690 .333 8.456
1 61 .037 83,690 .333 8.456
1 133 .025 83,690 .377 9.578
1 259 .018 83,916 .378 9.603
AN-1* 812 * 81,807 .384 9.752
83 (418) 19x22 .014 84,230 .380 9.650
84 (2,107) 2107 * 83,690 .410 10.41
* MIL-W-5086.
* Strand diameter not specified.
3
MIL-E-16366 A
F-48
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Wire Guide Tables
Terminal Products and Tools
NAVY INDIVIDUAL STRANDS WHOLE CONDUCTOR
AWG OR AN SHIPBOARD3NO. DIA. IN. CIR. MIL. AREA DIA. IN. DIA. MM
1/0 Wire Size
1/0 7 .123 105,500 .368 9.343
1/0 19 .075 105,500 .373 9.476
1/0 37 .053 105,500 .374 9.502
1/0 61 .042 105,500 .374 9.502
1/0 133 .028 105,761 .423 10.721
1/0 259 .020 105,672 .424 10.772
AN-0* 1,033 * 104,118 .432 10.971
100 (61) 61 .040 99,060 .363 9.216
105 (259) 37x7 * 105,500 .410 10.410
2/0 Wire Size
105 (2,646) 2,646 * 105,500 .460 11.680
2/0 7 .138 133,100 .414 10.512
2/0 19 .084 133,100 .419 10.639
2/0 37 .060 133,100 .420 10.670
2/0 61 .047 133,100 .420 10.670
2/0 133 .032 132,800 .474 12.042
2/0 259 .023 133,462 .477 12.118
AN-00* 1,327 * 133,665 .490 12.450
125 (61) 61 .045 124,900 .407 10.338
133 (259) 37x7 * 133,100 .460 11.680
133 (684) 19x36 .014 137,800 .480 12.190
133 (3,325) 3,325 * 133,100 .520 13.210
150 (61) 61 .051 157,600 .457 11.608
3/0 Wire Size
3/0 7 .155 167,800 .464 11.782
3/0 19 .094 167,800 .470 11.940
3/0 37 .067 167,800 .471 11.965
3/0 61 .052 167,800 .472 11.991
3/0 133 .036 167,607 .533 13.536
3/0 259 .026 167,402 .536 13.612
3/0 4,227 .006 168,023 .610 15.490
150 (760) 19x40 .014 153,100 .510 12.950
168 (427) 61x7 * 167,800 .520 13.210
4/0 Wire Size
4/0 7 .174 211,600 .522 13.261
4/0 19 .106 211,600 .528 13.413
4/0 37 .076 211,600 .529 13.439
4/0 61 .059 211,600 .530 13.460
4/0 133 .040 211,736 .599 15.219
4/0 259 .029 211,845 .601 15.265
AN-000* 1,661 * 167,332 .548 13.923
200 (61) 61 .057 198,700 .514 13.652
200 (988) 19x52 .014 199,100 .580 14.730
250 MCM Wire Size
250,000 19 .115 250,000 .574 14.582
250,000 37 2 250,000 .575 14.607
250,000 61 .064 250,000 .576 14.632
250,000 91 .052 250,000 .576 14.632
AN-0000* 2,104 * 211,954 .615 15.617
220 (259) 37x7 .029 220,700 .610 15.490
250 (61) 61 .064 250,000 .577 14.658
* MIL-W-5086.
* Strand diameter not specified.
3
MIL-E-16366 A.
F-49
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Military Standard Cross Reference
Terminal Products and Tools
MIL-T-7928
CAT. NO.
T&B
MS-25036 CLASS 1 & 2
-101 RA333
-102 RA853
-103 RA873
-104 RA723
-105 RA733
-106 RB1333
-107 RB853
-108 RB873
-109 RB723
-110 RB733
-111 RC333
-112 RC363
-113 RC703
-114 RC733
-115 RD10361
-116 RD10711
-117 RD10721
-118 RD10731
-119 RE10261
-120 RE10711
-121 RE10721
-122 RE10731
-123 RF10711
-124 RF10721
-125 RF10731
-126 RG9711
-127 RG9731
-128 RG9751
-129 RH9711
-130 RH9731
-131 RH9751
-132 RJ9711
-133 RJ9731
-135 RK9721
-136 RK9731
-137 RK9751
-138 RL9731
-139 RL9751
-140 RM9731
-141 RM9751
-142
-143
-144
-145
-146
-147
-148 RA323
-149 RA863
-150 RA713
-151 RA753
-152 RB1323
-153 RB863
-154 RB713
-155 RB753
-156 RC863
-157 RC713
-158 RC753
MIL-T-22909
CAT. NO.
MS-90485 T&B
-8 11781M
-6 11782M
-4 11783M
-2 11784M
-1 11785M
-01 11786M
-02 11787M
-03 11788M
-04 11789M
MIL-T-7928
CAT. NO.
MS-17143 T&B
-1 RA480
-2 RB480
-3 RC480
-4 RA481
-5 RB481
-6 RC481
-7 RA482
-8 RB482
-9 RC482
-10 RA483
-11 RB483
-12 RC483
-13 RA484
-14 RB484
-15 RC484
-16 RA485
-17 RB485
-19 RA486
-20 RB486
MIL-T-7928
CAT. NO.
T&B
MS-20659 CLASS 1 & 2
-101 A85G
-102 A87G
-103 B85G
-104 B87G
-105 C26
-106 C70
-107 D10361
-108 D10721
-109 E10711
-110 E10731
-111 F10711
-112 F10731
-113 G971
-114 G973
-115 H971
-116 H973
-117 J971
-118 J973
-119 K972
-120 K973
-121 L973
-122 L975
-123 M973
-124 M975
-128 C73
-129 D10731
-130 E10261
-131 E10721
-132 F10721
-133 G975
-134 H975
-135 J975
-136 K975
-140 D10161
-141 D10711
-144 F10261
-146 G926
-147 G972
-148 G974
-149 H972
-151 J972
-152 J974
-153 K971
-154 K974
-155 L972
-156 L974
-157 M972
-158 M974
-165 C33
-166 C75
MIL-T-7928
CAT. NO.
MS-21004 T&B
-1 A486
-2 A483
-3 A482
-4 A481
-5 A485
-6 A484
-7 A480
-8 B486
-9 B483
-10 B482
-11 B481
-12 B485
-13 B484
-14 B480
-15 C486
-16 C483
-17 C482
-18 C481
-19 C485
-20 C484
-21 C480
MIL-T-22909
CAT. NO.
-MS-23002 T&B
-8 21707M
-6 21708M
-4 21709M
-2 21710M
-1 21711M
-01 21712M
-02 21713M
-03 21714M
-04 21715M
F-50
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Cross Reference for Packaging
Terminal Products and Tools
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
A18-6 A85
A18-6F A116
A18-6FL A221
A18-8 A86
A18-8F A114
A18-8FL A224
A18-10 A87
A18-10F A115
A18-10FL A225
A18-12 A75
A18-14 A71
A18-38 A73
A18-110F A10
A18-111F A11
A18-250 A250
A18-250A A252G
A18-251T A251
A18-516 A72
AB14-6A AB51
AB14-8A AB52
AB14-10A AB53
AD18-182 AD182
AD18-183 AD183
B14-D B23
B14-4 B132
B14-6 B133
B14-6F B64
B14-6FL B220
B14-6FS B19
B14-8 B86
B14-8F B65
B14-8FL B223
B14-10 B87
B14-10F B115
B14-10FL B225
B14-10G B87G
B14-12 B75
B14-14 B71
B14-38 B73
B14-110F B10
B14-111F B11
B14-250 B250
B14-250A B252G
B14-250F B250G
B14-250T B251G
B14-251T B251
B14-516 B72
BC14-6 BC85
BC14-8 BC86
BC14-10 BC87
BC14-12 BC75
BC14-14 BC71
BC14-38 BC79
BC14-516 BC72
BD14-183 BD183
C10-6 C33
C10-6A C51
C10-6F C133
C10-6FL C220
C10-8 C77
C10-8A C52
C10-8F C114
C10-8FL C221
C10-10 C26
C10-10A C53
C10-10F C115
C10-10FL C222
C10-12 C75
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
RB14-8 RB863
RB14-8F RB1123
RB14-8FL RB2233
RB14-8FS RB1223
RB14-8X RB864
RB14-10 RB873
RB14-10F RB1153
RB14-10FL RB2253
RB14-10FS RB1253
RB14-10X RB874
RB14-12 RB753
RB14-14 RB713
RB14-14F RB1163
RB14-14X RB714
RB14-38 RB733
RB14-38X RB734
RB14-47PT RB147PT
RB14-110F RB10
RB14-111F RB11
RB14-250 RBB250
RB14-250A RB2577F
RB14-250F RB250
RB14-250FP RB250P
RB14-516 RB723
RB14-516X RB724
RB44 RB4
RBC14-14 RBC713
RBC14-516 RBC723
RBD14-182 RBD1823
RBD14-183 RBD1833
RC10-6 RC333
RC10-6F RC1113
RC10-6FL RC2203
RC10-8 RC863
RC10-8F RC1123
RC10-8FL RC2213
RC10-8FS RC1223
RC10-8X RC864
RC10-10 RC363
RC10-10F RC1153
RC10-10FL RC2223
RC10-10FS RC1253
RC10-10X RC364
RC10-12 RC753
RC10-14 RC713
RC10-14F RC1163
RC10-14FL RC2233
RC10-14X RC714
RC10-38 RC733
RC10-38X RC734
RC10-55PT RC155PT
RC10-250A RC2577F
RC10-250F RC250
RC10-516 RC703
RC55 RC6
RD8-10 RD367
RD8-12 RD757
RD8-14 RD717
RD8-38 RD737
RD8-516 RD727
RE6-10 RE267
RE6-12 RE757
RE6-14 RE717
RE6-38 RE737
RE6-516 RE727
RF4-10 RF267
RF4-12 RF757
RF4-14 RF717
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
C10-14 C71
C10-14F C116
C10-38 C73
C10-250A C252G
C10-250F C250
C10-516 C70
D8-10 D36
D8-12 D75
D8-14 D71
D8-38 D73
D8-516 D72
E6-10 E26
E6-12 E75
E6-14 E71
E6-38 E73
E6-516 E72
F4-10 F26
F4-12 F75
F4-14 F71
F4-38 F73
F4-516 F72
F250TA FTA250
G2-12 G975
G2-14 G971
G2-38 G973
G2-516 G972
H10-14 H971
J20-38 J973
K30-38 K973
L40-38 L973
M250-38 M973
NW14-6 NW81
NW14-10 NW83
NW14-12 NW84
NW22-10 NW23
RA18D RA23
RA18-4 RA323
RA18-6 RA853
RA18-6F RA1103
RA18-6FL RA2213
RA18-6FS RA1203
RA18-8 RA863
RA18-8F RA1123
RA18-8FL RA2243
RA18-8FS RA1223
RA18-10 RA873
RA18-10F RA1153
RA18-10FL RA2253
RA18-10FS RA1253
RA18-12 RA753
RA18-14 RA713
RA18-14F RA1163
RA18-38 RA733
RA18-47PT RA147PT
RA18-110F RA10
RA18-111F RA11
RA18-250A RA2577F
RA18-250F RA250
RA18-250FP RA250P
RA18-516 RA723
RAD18-182 RAD1823
RAD18-183 RAD1833
RB14-4 RB1323
RB14-6 RB853
RB14-6F RB1113
RB14-6FL RB2213
RB14-6FS RB1203
RB14-6X RB854
NOTE: All catalog numbers do not appear in this cross reference.
This means it may not be available in one of the package options.
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
RF4-38 RF737
RF4-516 RF727
RG2-10 RG267
RG2-12 RG757
RG2-14 RG717
RG2-38 RG737
RG2-516 RG727
RP12 RP7
2A-18 AA2
2A20 RAA24
2A22-20 A1A
2B-14 BB2
2B-16 RBB25
2B18-16 B1B
2C-10 CC2
2C-12 RCC26
2C14-12 C1C
2D-8 DD102
2D10-9 D1D
2E-6 EE2
2E8-7 E1E
2F-4 FF2
2F6-5 F1F
2G21 GG2
2G4-2 G1G
2RAA RAA23
2RA18 RAA21
2RA18X RAA217-170
2RBB RBB23
2RB14 RBB21
2RB14X RBB217-200
2RCC RCC23
2RC10 RCC21
2RC10X RCC217-250
2RD8 RDD27
2RE6 REE28
10RC-6 RC337
10RC-6F RC1337
10RC-6FL RC2207
10RC-6FLX RC2207-250
10RC-6X RC337-250
10RC-8 RC777
10RC-8F RC1147
10RC-8FL RC2217
10RC-8FLX RC2217-250
10RC-8X RC777-250
10RC-10 RC367
10RC-10F RC1157
10RC-10FL RC2227
10RC-10FLX RC2227-250
10RC-10FX RC1157-250
10RC-10X RC367-250
10RC-14 RC717
10RC-14F RC1167
10RC-14FL RC2237
10RC-14X RC717-250
10RC-38 RC737
10RC-38X RC737-250
10RC-55PT RC55PT
10RC-250F RC257
10RC-250T RC2517
10RC-251T RC25177
10RC-516 RC707
10RC-2577 RC2573
14RB-4 RB1327
14RB-6 RB857
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
14RB-6F RB647
14RB-6FL RB2207
14RB-6FLX RB2207-200
14RB-6FX RB647-200
14RB-6X RB857-200
14RB-8 RB867
14RB-8F RB657
14RB-8FL RB2237
14RB-8FLX RB2237-200
14RB-8FX RB657-200
14RB-8X RB867-200
14RB-10 RB877
14RB-10F RB1157
14RB-10FL RB2257
14RB-10FLX RB2257-200
14RB-10FX RB1157-200
14RB-10X RB877-200
14RB-14 RB717
14RB-14X RB717-200
14RB-38 RB737
14RB-47PT RB47PT
14RB-250F RB257
14RB-250T RB2517
14RB-251T RB25177
14RB-516 RB727
14RB-2577 RB2573
14RBC-6 RBC857
14RBC-8 RBC867
14RBC-10 RBC877
14RBC-14 RBC717
14RBC-516 RBC727
14RBC-38 RBC797
14RBC-12 RBC757
14RBD-182 RBD1827
14RBD-183 RBD1837
14RBD-18277 RBD18277
14RBD-18377 RBD18377
18RA-4 RA77
18RA-6 RA857
18RA-6F RA1167
18RA-6FL RA2217
18RA-6FLX RA2217-170
18RA-6FX RA1167-170
18RA-6X RA857-170
18RA-8 RA867
18RA-8F RA1147
18RA-8FL RA2247
18RA-8FX RA1147-170
18RA-8X RA867-170
18RA-10 RA877
18RA-10F RA1157
18RA-10FL RA2257
18RA-10FLX RA2257-170
18RA-14 RA717
18RA-38 RA737
18RA-47PT RA47PT
18RA-250F RA257
18RA-250T RA2517
18RA-251T RA25177
18RA-516 RA727
18RA-516X RA727-170
18RA-2577 RA2573
18RAD-182 RAD1827
18RAD-183 RAD1837
18RAD-18277 RAD18277
18RAD-18377 RAD18377
F-51
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Cross Reference for Packaging
Terminal Products and Tools
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
A18-110F A10
A18-111F A11
A18-10F A115
A18-14 A71
A18-14F A71F
A18-12 A75
A18-6 A85
A18-8 A86
A18-10 A87
A18-8F A114
A18-10F A115
A18-6F A116
A18-6FL A221
A18-8FL A224
A18-10FL A225
A18-250 A250
A18-251T A251
A18-250A A252G
2A22-20 A1A
2A18 AA2
AB14-6A AB51
AB14-8A AB52
AB14-10A AB53
AD18-182 AD182
AD18-183 AD183
B14-110F B10
B14-111F B11
B14-D B23
B14-6F B64
B14-8F B65
B14-14 B71
B14-516 B72
B14-38 B73
B14-12 B75
B14-6 B133
B14-8 B86
B14-10 B87
B14-10G B87G
B14-10F B115
B14-4 B132
B14-6FL B220
B14-8FL B223
B14-10FL B225
B14-250 B250
B14-250F B250G
B14-251T B251
B14-250T B251G
B14-250A B252G
2B18-16 B1B
2B14 BB2
BC14-14 BC71
BC14-516 BC72
BC14-12 BC75
BC14-38 BC79
BC14-6 BC85
BC14-8 BC86
BC14-10 BC87
BD14-183 BD183
C10-10 C26
C10-6 C33
C10-8A C52
C10-10 C53
C10-516 AC70
C10-14 C71
C10-38 C73
C10-12 C75
C10-8 C77
C10-8F C114
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
18RA-8X RA867-170
RA18-10 RA873
18RA-10 RA877
18RA-10X RA877-170
RA18-6F RA1103
RA18-8F RA1123
18RA-8F RA1147
18RA-8FX RA1147-170
RA18-10F RA1153
18RA-10F RA1157
RA18-14F RA1163
18RA-6F RA1167
18RA-6FX RA1167-170
RA18-6FS RA1203
RA18-8FS RA1223
RA18-10FS RA1253
RA18-6FL RA2213
18RA-6FL RA2217
18RA-6FLX RA2217-170
RA18-8FL RA2243
18RA-8FL RA2247
RA18-10FL RA2253
18RA-10FL RA2257
18RA-10FLX RA2257-170
18RA-250T RA2517
18RA-2577 RA2573
RA18-250A RA2577F
18RA-251T RA25177
2RA18 RAA21
2RAA RAA23
2A20 RAA24
2RA18X RAA217-170
RAD18-182 RAD1823
18RAD-182 RAD1827
RAD18-183 RAD1833
18RAD-183 RAD1837
RAD18-188A RAD1887F
18RAD18277 RAD18277
18RAD18377 RAD18377
RB44 RB4
RB14-110F RB10
RB14-111F RB11
RB14-D RB23
14RB-47PT RB47PT
14RB-6FS RB197
RB14-47PT RB147PT
RB14-250F RB250
RB14-250FP RB250P
14RB-250F RB257
14RB-6F RB647
14RB-6FX RB647-200
14RB-8F RB657
14RB-8FX RB657-200
RB14-14 RB713
RB14-14X RB714
14RB-14 RB717
14RB-14X RB717-200
RB14-516 RB723
RB14-516X RB724
14RB-516 RB727
RB14-38 RB733
RB14-38X RB734
14RB-38 RB737
RB14-12 RB753
RB14-6 RB853
RB14-6X RB854
14RB-6 RB857
14RB-6X RB857-200
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
C1010F C115
C10-14F C116
C10-6F C133
C10-6FL C220
C10-8FL C221
C10-10FL C222
C10-250F C250
C10-250A C252G
2C14-12 C1C
2C10 CC2
D8-10 D36
D8-14 D71
D8-516 D72
D8-38 D73
D8-12 D75
2D10-9 D1D
2D8 DD102
E6-10 E26
E6-14 E71
E6-516 E72
E6-38 E73
E6-12 E75
2E8-7 E1E
2.00E+06 EE2
F4-10 F26
F4-14 F71
F4-516 F72
F4-38 F73
F4-12 F75
2F6-5 F1F
2F4 FF2
F250-TA FTA250
G2-14 G971
G2-516 G972
G2-38 G973
G2-12 G975
2G4-2 G1G
2G21 GG2
H10-14 H971
J20-38 J973
K30-38 K973
L40-38 L973
M250-38 M973
NW22-10 NW23
NW14-10 NW83
NW14-12 NW84
RA18-110F RA10
RA18-111F RA11
RA18-D RA23
18RA-47PT RA47PT
18RA-4 RA77
RA18-47PT RA147PT
RA18-250F RA250
RA18-250FP RA250P
18RA-250F RA257
RA18-4 RA323
RA18-14 RA713
18RA-14 RA717
RA18-516 RA723
18RA-516 RA727
RA18-38 RA733
18RA-38 RA737
RA18-12 RA753
RA18-6 RA853
18RA-6 RA857
18RA-6X RA857-170
RA18-8 RA863
18RA-8 RA867
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
RB14-8 RB863
RB14-8X RB864
14RB-8 RB867
14RB-8X RB867-200
RB14-10 RB873
RB14-10X RB874
14RB-10 RB877
14RB-10X RB877-200
RB14-6F RB1113
RB14-8F RB1123
RB14-10F RB1153
14RB-10F RB1157
14RB-10FX RB1157-200
RB14-14F RB1163
RB14-6FS RB1203
RB14-8FS RB1223
RB14-10FS RB1253
RB14-4 RB1323
14RB-4 RB1327
14RB-6FL RB2207
14RB-6FLX RB2207-200
RB14-6FL RB2213
RB14-8FL RB2233
14RB-8FL RB2237
14RB-8FLX RB2237-200
RB14-10FL RB2253
14RB-10FL RB2257
14RB-10FLX RB2257-200
14RB-250T RB2517
14RB-2577 RB2573
RB14-250A RB2577F
14RB-251T RB25177
2RB14 RBB21
2RBB RBB23
2B16 RBB25
2RB14X RBB217-200
RB14-250 RBB250
RBC14-14 RBC713
14RBC-14 RBC717
RBC14-516 RBC723
14RBC-516 RBC727
14RBC-12 RBC757
14RBC-38 RBC797
14RBC-6 RBC857
14RBC-8 RBC867
14RBC-10 RBC877
RBD14-182 RBD1823
14RBD-182 RBD1827
RBD14-183 RBD1833
14RBD-183 RBD1837
14RBD-18277 RBD18277
14RBD-18377 RBD18377
RC55 RC6
10RC-55PT RC55PT
RC10-55PT RC155PT
RC10-250F RC250
10RC-250F RC257
RC10-6 RC333
10RC-6 RC337
10RC-6X RC337-250
RC10-10 RC363
RC10-10X RC364
10RC-10 RC367
10RC-10X RC367-250
RC10-516 RC703
10RC-516 RC707
CAT. NO. CAT. NO.
T&B DISTRIBUTOR T&B BULK
PACKAGE PACKAGE
RC10-14 RC713
RC10-14X RC714
10RC-14 RC717
10RC-14X RC717-250
RC10-38 RC733
RC10-38X RC734
10RC-38 RC737
10RC-38X RC737-250
RC10-12 RC753
10RC-8 RC777
10RC-8X RC777-250
RC10-8 RC863
RC10-8X RC864
RC10-6F RC1113
RC10-8F RC1123
10RC-8F RC1147
RC10-10F RC1153
10RC-10F RC1157
10RC-10FX RC1157-250
RC10-14F RC1163
RC10-8FS RC1223
RC10-10FS RC1253
10RC-6F RC1337
RC10-6FL RC2203
10RC-6FL RC2207
10RC-6FLX RC2207-250
RC10-8FL RC2213
10RC-8FL RC2217
10RC-8FLX RC2217-250
RC10-10FL RC2223
10RC-10FL RC2227
10RC-10FLX RC2227-250
RC10-14FL RC2233
10RC-14FL RC2237
10RC-250T RC2517
10RC-2577 RC2573
RC10-250A RC2577F
10RC-251T RC25177
2RC10 RCC21
2RCC RCC23
2C12 RCC26
2RC10X RCC217-250
RD8-10 RD367
RD8-14 RD717
RD8-516 RD727
RD8-38 RD737
RD8-12 RD757
2RD8 RDD27
RE6-10 RE267
RE6-14 RE717
RE6-516 RE727
RE6-38 RE737
RE6-12 RE757
2RE6 REE28
RF4-10 RF267
RF4-14 RF717
RF4-516 RF727
RF4-38 RF737
2RF4 RFF29
RG2-10 RG267
RG2-14 RG717
RG2-516 RG727
RG2-38 RG737
RG2-12 RG757
RP12 RP7
F-52
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Catamount®Terminals
Terminal Products and Tools
Non-Insulated Ring Terminals
WIRE BOLT PKG.
CAT. NO.
RANGE SIZE QTY.
T18-6R #4–#6 50
T18-8R 22–16 #8 50
T18-10R #10 50
T14-6R #6 50
T14-8R 16–14 #8 50
T14-10R #10 50
T10-6R #6 25
T10-8R #8 25
T10-10R 12–10 #10 25
T10-14R 14"25
Vinyl Insulated Fork Terminals
WIRE BOLT PKG.
CAT. NO.
RANGE SIZE QTY.
TV18-6F #6 50
TV18-8F #8 50
TV18-10F 22–16 #10 50
TV18-14F 14"50
TV14-6F #6 50
TV14-8F #8 50
TV14-10F 16–14 #10 50
TV14-14F 14"50
TV10-6F #6 25
TV10-8F #8 25
TV10-10F 12–10 #10 25
TV10-14F 14"25
TV10-516F 516"25
Non-Insulated Fork Terminals
WIRE BOLT PKG.
CAT. NO.
RANGE SIZE QTY.
T18-6F #6 50
T18-8F 22–16 #8 50
T18-10F #10 50
T14-6F #6 50
T14-8F 16–14 #8 50
T14-10F #10 50
T10-6F #6 25
T10-8F #8 25
T10-10F 12–10 #10 25
T10-14F 14"25
Vinyl Insulated Locking
Fork Terminals
WIRE BOLT PKG.
CAT. NO.
RANGE SIZE QTY.
TV18-6LF #6 50
TV18-8LF 22–16 #8 50
TV18-10LF #10 50
TV14-6LF #6 50
TV14-8LF 16–14 #8 50
TV14-10LF #10 50
TV10-6LF #6 25
TV10-8LF 12–10 #8 25
TV10-10LF #10 25
Vinyl Insulated Butt Splices
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-BS 22–18 50
TV14-BS 16–14 50
TV10-BS 12–10 25
Nylon Wire Joints
WIRE STD.
CAT. NO.
RANGE PKG.
TN18-WJ 22–16 50
TN14-WJ 16–14 50
TN10-WJ 12–10 25
Multiple Quick Splices
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-00QS 22–16 50
TV14-00QS 16–14 50
TV10-00QS 12–10 25
Vinyl Insulated
Ring Terminals
WIRE BOLT PKG.
CAT. NO.
RANGE SIZE QTY.
TV18-6R #6 50
TV18-8R #8 50
TV18-10R 22–16 #10 50
TV18-14R 14"50
TV18-516R 516"50
TV14-6R #6 50
TV14-8R #8 50
TV14-10R #10 50
TV14-14R 16–14 14"50
TV14-516R 516"50
TV14-38R 38"50
TV10-6R #6 25
TV10-8R #8 25
TV10-10R #10 25
TV10-14R 12–10 14"25
TV10-516R 516"25
TV10-38R 38"25
TV10-12R 12"25
TV8-8R #8 10
TV8-10R #10 10
TV8-14R 14"10
TV8-516R 8 AWG 516"10
TV8-38R 38"10
TV8-12R 12"10
TV6-10R #10 10
TV6-14R 14"10
TV6-516R 6 AWG 516"10
TV6-38R 38"10
TV6-12R 12"10
*8 AWG 25 to a package **6 AWG 10 to a package
Non-Insulated Locking
Fork Terminals
WIRE BOLT PKG.
CAT. NO.
RANGE SIZE QTY.
T18-6LF #6 50
T18-8LF 22–16 #8 50
T18-10LF #10 50
T14-6LF #6 50
T14-8LF 16–14 #8 50
T14-10LF #10 50
T10-6LF #6 25
T10-8LF 12–10 #8 25
T10-10LF #10 25
F-53
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Catamount®Terminals
Terminal Products and Tools
Nylon Fully Insulated
Male Disconnects —
250 Series
WIRE PKG.
CAT. NO.
RANGE QTY.
TNF18-250MD 22–16 50
TNF14-250MD 16–14 50
TNF10-250MD 12–10 25
Vinyl Insulated Piggyback
Disconnects — 250 Series
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-250PD 22–16 50
TV14-250PD 16–14 50
TV10-250PD 12–10 25
Nylon Fully Insulated Female
Disconnects — 250 Series
WIRE PKG.
CAT. NO.
RANGE QTY.
TNF18-250FD 22–16 50
TNF14-250FD 16–14 50
TNF10-250FD 12–10 25
Vinyl Insulated Male
Bullet Connectors —
4mm (.156")
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-4MB 22–16 50
TV14-4MB 16–14 50
Vinyl Fully Insulated
Female Bullet Connectors
— 4mm (.156")
WIRE PKG.
CAT. NO.
RANGE QTY.
TVF18-4FB 22–16 50
Fully Insulated Nylon
Male Bullet Connectors
WIRE PKG.
CAT. NO.
RANGE QTY.
TNF18-4MB 22–16 50
TNF14-4MB 16–14 50
Nylon Fully Insulated
Female Bullet Connectors
WIRE PKG.
CAT. NO.
RANGE QTY.
TNF18-4FB 22–16 50
TNF14-4FB 16–14 50
Vinyl Insulated Straight
Blade Terminals
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-10BL 50
TV18-18BL 22–16 50
TV14-10BL 16–14 50
TV14-18BL 50
TV10-10BL 12–10 25
Vinyl Insulated Straight
Pin Terminals
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-12PT 22–16 50
TV14-12PT 16–14 50
TV10-14PT 12–10 25
Vinyl Insulated Male
Disconnects — 250 Series
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-250MD 22–16 50
TV14-250MD 16–14 50
TV10-250MD 12–10 25
Vinyl Insulated Female
Disconnects — 250 Series
WIRE PKG.
CAT. NO.
RANGE QTY.
TV18-250FD 22–16 50
TV14-250FD 16–14 50
TV10-250FD 12–10 25
Vinyl Fully Insulated
Female Disconnects —
250 Series
WIRE PKG.
CAT. NO.
RANGE QTY.
TVF18-250FD 22–16 50
TVF14-250FD 16–14 50
TVF10-250FD 12–10 25
F-54
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Catamount®Terminal Tools
Terminal Products and Tools
CM2000A
CAT. NO.
DESCRIPTION PKG. QTY.
WT111M Plier tool with cutter for 22–10 AWG non-insulated terminals 1
WT112M Plier tool with cutter for 22–10 AWG insulated and non-insulated 1
terminals, splices and disconnects
TBM6S Toggle Type Hand Tool with Shure-Stake®for 8–6 AWG, vinyl insulated 1
terminals (dies sold separately)
ERG1-WS Ergonomic Wire Stripping Tool 1
CM2000A 10" Ratchet Crimping Tool for insulated terminals (22–10 AWG) 1
WT111M
WT112M
TBM6S
ERG1-WS
F-55
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Terminal Products and Tools
Technical Info
FINISH SUFFIX SPEC. TEMP. RATING
Gold Plate GP MIL-G-45204 Type II, Grade B, C, D, Class O 260˚ C
Nickel Plate NP QQ-N-290 Class 2, Grade G 260˚ C
Plain Finish PF None 150˚ C
Silver Plate SP MIL-T-16366 Type I or II, 400° F, 204° C 150˚ C
Platings/Finish
Electroplated-Tin is standard finish. All others require minimum order
quantities and are generally not stocked. Alternative platings are as
follows: Gold, Silver, Tin-Alloys, Nickel or plain finish. See table (below)
for specification information:
Listing
Sta-Kon®Rings, Forks and Locking Forks are tested
and listed to UL®486A, two-way splices to UL 486C,
disconnects to UL 310, and all appli cable products
to CSA 22.2.
Sta-Kon®Technical Data
TERMINALS & SPLICES UL®94
INSULATION RATING FLAMMABILITY VOLTAGE TEMPERATURE
Nylon V-2 600V** 105° C
Vinyl V-0 600V** 105° C
Tefzel®V-0 600V** 150° C
Disconnects 300V 105° C
Non-Insulated 600V 150º C
**1000V fixture or sign
The proper installation procedure for the quality assured connection!
The proper installation of terminals, splices, and connectors is very important
to the efficient performance of an electrical system. The properly installed
connector will enable good conductivity through the termination. A poor
termination results in a high-resist ance connection. A poor connector
installation may cause damage or failure of an entire system. Certain
basic requirements must be met to make a good termination.
Before the connector or terminal is installed on the conductor,
follow these recommended practices:
Strip the insulation carefully to avoid nicking
or cutting conductor strands
Strip the insulation to the proper length so the conductors can
be inserted fully into the connector barrel; the wire/cable should
be visible in the inspection hole of the lug; the proper strip length
can be found on page F-45.
Installation Procedure
1. Train the wires to eliminate
fanning of strands.
2. Open handles fully.
3. Insert terminal in proper die nest
and locate it as shown above.
When crimping a butt splice,
position in proper die nest
with window facing indentor.
4. Close handles slightly to secure
terminal. Do not deform terminal.
5. Insert properly stripped
wire into terminal.
6. Complete crimp
by closing handles.
Shure-Stake®
tools are matched
to terminals.
ERG2001
stripped wire
rest
stripping
length
indentor
terminal
orient tongue
as shown
F-56
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com