Product Data Sheet CO-6000 Series Surface Mount Oven Controlled Crystal Oscillators Features * 5 MHz, 10MHz, 13MHz Standard, Other Frequencies Available from 4.8 MHz to 40 MHz. * Stability as high as 5 x 10-9 over 0C to +50C * Aging: 5 x 10-9 / day to 5 x 10-10/day * Package: 1.0" x 0.9" x 0.42" (25.4 x 22.0 x 10.3 mm) * Low Profile, Surface Mount Design * Supply voltage: +5 volts or +3.3 volts Applications * Telecommunication Systems * Wireless Communication Equipment * Data Communications * Instrumentation Description Vectron International has introduced a series of low profile, surface mount, oven controlled crystal oscillators (OCXOs) available in frequencies from 4.8 MHz to 40 MHz. The model CO-6000 series provides exceptionally low aging rates and high temperature stabilities and is packaged as a surface mount device (SMD), measuring 1.0" x 0.9" x 0.42" (25.4 mm x 22.0 mm x 10.3 mm). The oscillators provide an aging rate of 1 x 10-9/day with temperature stabilities as high as 5 x 10-9 over 0C to 50C. They operate from a supply voltage of +5Vdc or +3.3 Vdc at a stabilized power of 1.0 watts. The product finds application in telecommunications, data communications, frequency synthesizers, timing, navigation, telemetry and instrumentation systems. CO-6000 Series Surface Mount Oven Controlled Crystal Oscillators Performance Characteristics Parameter Characteristic CO-6004/6006/6007 Series (AT cut crystal) Frequency: Temperature Stability: Aging: Warm-up: (after 24 hours off) CO-6007S/6008S Series (SC cut crystal) 4.8 MHz to 40 MHz with 5, 10, 13, 16.384, 19.44, 20, 24.8, 26 and 38.88 MHz standard B28: 2 x 10 -8 over 0C to +50C C58: 5 x 10 -8 over 0C to +70C D17: 1 x 10 -7 over -20C to +70C SB59: 5 x 10 -9 over 0C to +50C SC18: 1 x 10 -8 over 0C to +70C SD28: 2 x 10 -8 over -20C to +70C CO-6004: 1 x 10-8 /day (2 x 10 -6 /yr) CO-6006: 3 x 10-9 /day (3 x 10 -7 /yr) CO-6007: 1 x 10-9 /day (1 x 10 -7 /yr) CO-6007S: 1 x 10-9 /day (1 x 10 -7 /yr) CO-6008S: 5 x 10-10 /day (5 x 10 -8 /yr) optional at some frequencies to within 1 x 10 -7 of final frequency in 5 minutes @ 25C to within 1 x 10 -8 of final frequency in 5 minutes @ 25C Frequency vs. Supply (5%): 1 x 10 -9 /percent 1 x 10 -9 /percent Short Term (Allan Variance): 1 x 10 -10 /second 5 x 10 -11 /second Output level: HCMOS/TTL Standard, >0.5 Vrms/50 ohm (+7 dBm) optional (LVCMOS output with 3.3Vdc power supply) Harmonics (sinewave): Power supply: Frequency adjustment: Phase Noise: (typical) Size mm (in.) : Base: Reflow: -25 dBc +5 Vdc 5%; 2.5W peak @ -20C; 1.0W stabilized at 25C (+3.3 Vdc 5%, optional) 5 x 10 -6 typical for 0 to 4V control 2 x 10-6 typical for 0 to 4V control -100 dBc/Hz @ 10 Hz offset -140 dBc/Hz @ 50 kHz offset -120 dBc/Hz @ 10 Hz offset -145 dBc/Hz @ 50 kHz offset 25.4 x 22 x 10.3mm (1.0" x 0.9" x 0.42" max.) FR4 material with edge contacts 240 (+5, -0)C for 10 to 40 seconds Vectron International * 166 Glover Avenue, Norwalk, CT 06856 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON 2 CO-6000 Series Surface Mount Oven Controlled Crystal Oscillators Outline Drawing 3 0.0 .75) O ( R 0.1 (2.5) 4 3 Pin Configuration 1. Control voltage VC 2. Reference voltage output VREF 3. Supply voltage VB 4. RF-output 5. Ground, case 0.1 (2.5) 0.87.01 .70.01 (220.2) (17.80.2) 1.0.01 (25.40.2) 2 soldering pods 5 0.41 max (10.5) 1 Foot print for PCB Design 0.93 (23.5) 0.16 (4) 0.14 (3.5) in (mm) 5 .70 (17.8) 1 2 4 3 Test Circuit V control V 1 +VB 470 Ohm A 3 Oscillator 4 2 Oscilloscope, Counter or Spectrum Analyzer RL = 50 Ohm V GND Recommended Soldering Profile Vectron International * 166 Glover Avenue, Norwalk, CT 06856 * Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON 3 CO-6000 Series Surface Mount Oven Controlled Crystal Oscillators Tape and Reel Note: Dimensions in mm How To Order CO-600 Aging* 4=5x10-9/day (5x10-7/yr) 6=3x10-9/day (3x10-7/yr) 7=1x10-9/day (1x10-7/yr) 8=5x10-10/day (5x10-8/yr) optional for some frequencies Temperature Stability (See Page 2) (eg C58 = 5x10-8 over 0C to 70C) Frequency Output 1: HCMOS/TTL 2: Sinewave 3: LVCMOS with +3.3Vdc supply www.vectron.com For additional information please contact: USA: Vectron International * 166 Glover Avenue, Norwalk, CT 06856 . . . . Tel: 1-88-VECTRON-1 * Fax: 1-888-FAX-VECTRON EUROPE: In Denmark, Finland, Ireland, Israel, Norway, Spain, UK . . . . . . . Tel: 44 (0) 1703 766 288 * Fax: 44 (0) 1703 766 822 In Austria, Belgium, France, Germany, Italy, Luxembourg Netherlands, Sweden, Switzerland, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 72 63 6480 * Fax: 49 (0) 72 63 6196 ASIA: In China, Taiwan, Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 603-598-0070 * Fax: 603-598-0075 In Korea, Singapore, Australia, India . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 203-853-4433 * Fax: 203-849-1423 Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Printed in the USA 12/99 4