REVISION Z NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. PARTS SHALL BE ROHS COMPLIANT. 3. PARTS TO BE PACKAGED IN TRAYS, TAIL SIDE DOWN. (LESS THAN FULL TRAY QUANTITIES ARE TO BE PACKAGED IN FOAM) 4. HDMR FORMERLY NAMED HDMI. 5. DIMENSION APPLIES TO CONTACT & SHIELD. DO NOT SCALE FROM THIS PRINT C1 13.90 .547 "A" 4.000.15 .157.006 C3 +0.05 'C' +.002 9.00 .354 0.900.05 .035.002 0.45 .018 "A" +0.10 DETAIL 'E' SCALE 5 : 1 +0.05 "B" CL 18 4.000.15 .157.006 DETAIL 'C' SCALE 15 : 1 6.80.2 .27.008 C6 2.00 .079 4.60 .181 C5 +0.05 9.40 - 0.10 +0.10 0.00 12.05 +.004 .388 - .000 +.002 .370 - .004 +.004 3.10 .122 "B" SECTION "D"-"D" SCALE 2.5 : 1 C:\EnterpriseVault\DWG\MISC\MKTG\HDMR-XX-XX-X-XX-XX-XX-MKT.SLDDRW UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MM. TOLERANCES ARE: 14.50 .571 C4 DECIMALS .X: 0.25[.010] .XX: 0.20[.008] .XXX: 0.10[.004] 1.000.1 .039.004 MATERIAL: +0.10 0.35 - 0.05 3.4 .13 REF 1.20 .047 FIG 1 HDMR-19-01-X-SM SHOWN .474 - .000 4.800.1 .19.004 'E' 2.2 .09 0.50 .020 +0.10 9.85 0.00 6.18 .244 +.002 8.00 .315 SECTION "B"-"B" SCALE 2 : 1 C7 4.55 - 0.04 .179 - .002 02 "D" +.004 0.060.03 .002.001 0.90 .035 "A" "B" PLATING C8 (-19 POSITION) -S: CONTACT AREA: .000030" GOLD TAILS: .BRIGHT ACID TIN 'F' SHELL: NICKEL Y -F: CONTACT AREA: .000001" GOLD TAILS: BRIGHT ACID TIN SHELL: NICKEL (-29 POSITION) -S: CONTACT AREA: .000030" GOLD TAILS: .000030" BRIGHT ACID TIN 0.45 .018 SHELL: NICKEL REF Y -F: CONTACT AREA: .000001" GOLD TAILS: .000001" GOLD SHELL: NICKEL 0.45 - 0.05 .018 - .002 01 19 OPTION -PF: PANEL FLANGE (SEE SHT 2, FIG. 4) -L: LOCKING OPTION(ONLY AVAILABLE ON HDMR-19-01-X-TH-PF-L, SEE SHT 2, FIG 5 & HDMR-29-01-X-TH-PF-L, SEE SHT 3 FIG 8) LEAD TERMINATION -SM: SURFACE MOUNT -TH: THROUGH HOLE (ONLY AVAILABLE ON HDMR-19-01-X-TH-PF-L)(SEE SHT 2, FIG 3) 10.800.10 .425.004 "D" 0.50 .020 C26 SECTION "A"-"A" SCALE 2 : 1 15.00 .591 14.00 - 0.04 .551 - .002 PACKAGINGE OPTION -TR: TAPE & REEL (ONLY AVAILABLE WITH OUT -PF OPTION) SHIELD TAIL STYLE -01: THROUGH HOLE -02: SURFACE MOUNT (SEE SHT 2, FIG 2)(-19 POS ONLY) 0.15 .006 0.500.10 .020.004 HDMR-XX-XX-X-XX-XX-XX No OF POSITIONS -19: (SEE SHT 1, FIG. 1) -29: (SEE SHT 3) 9.00 .354 C2 (SEE NOTE 4) DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] +.004 .014 - .002 DETAIL 'F' SCALE 5 : 1 ANGLES 1 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1:0.333333 INSULATOR: HIGH TEMP THERMOPLASTIC (UL94V-0) CONTACT: COPPER ALLOY SHELL: NICKEL PLATED BRASS 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: HDMI RECEPTACLE DWG. NO. HDMR-XX-XX-X-XX-XX-XX BY: B. PERRY 9/14/07 SHEET 1 OF 3 REVISION Y FIG 2 -02 SHIELD TAIL STYLE (HDMR-19-02-X-SM SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)) FIG 3 -TH LEAD TERMINATION STYLE (ONLY AVAILABLE ON HDMR-19-01-X-TH-PF-L) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)) 0.35 .014 0.10[.114] (SEE NOTE 5) C9 C10 C15 C10 1.60 .063 2.800.15 .110.006 1.20 .047 9.00 .354 17.20 .677 0.76 .030 9.00 .354 C13 0.500.08 .020.003 C16 C14 0.800.13 .031.005 Y FIG 5 -L: LOCKING LEADS (ONLY AVAILABLE ON HDMR-19-01-X-TH-PF-L) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)) FIG 4 -PF: PANEL FLANGE (HDMR-19-01-X-SM-PF SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)) 1.50 .059 REF 7.50 .295 2.50 .098 REF C11 M3 X 0.5 THREAD 0.90 .035 REF 13.10 .516 REF C12 CL 9.975 .3927 7.20 .283 REF 16.01 .630 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 C:\EnterpriseVault\DWG\MISC\MKTG\HDMR-XX-XX-X-XX-XX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: HDMI RECEPTACLE DWG. NO. HDMR-XX-XX-X-XX-XX-XX BY: B. PERRY 9/14/07 SHEET 2 OF 3 REVISION Y C18 14.000.25 .551.010 C17 0.500 .0197 0.200 .0079 FIG 6 HDMR-29-01-X-SM SHOWN 12.160 .4787 22.300 .8780 21.300 .8386 14.000.25 .551.010 29 01 C23 4.550 .1791 28 6.200 .2441 2.100 .0827 02 13.000.25 .512.010 C19 0.50 .020 4.700 .1850 21.8000.10 .8583.004 C20 C22 1.000 .0394 C21 2.000 .0787 5.900 .2323 7.50 .295 FIG 7 HDMR-29-01-X-SM-PF SHOWN (DIFFERENT AS SHOWN, OTHERWISES SAME AS FIG 6) * =NOT RELEASED 7.20 .283 REF 16.050 .632 15.00 .590 C25 M3 X 0.5 THREAD C26 2.600.15 .102.006 16.650 .6555 C24 9.976 .3928 CL 7.20 .284 REF C27 14.00 .551 FIG 8 HDMR-29-01-X-TH-PF-L SHOWN * (DIFFERENT AS SHOWN, OTHERWISES SAME AS FIG 3) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 C:\EnterpriseVault\DWG\MISC\MKTG\HDMR-XX-XX-X-XX-XX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: HDMI RECEPTACLE DWG. NO. HDMR-XX-XX-X-XX-XX-XX BY: B. PERRY 9/14/07 SHEET 3 OF 3