REVISION CB DO NOT SCALE FROM THIS PRINT A ! <> 2 MAX Sway bua 8 NO. OF POS. x .100+.008 [2.54.20] (CUT TOLERANCE) mz wacsen Oe OPER ED = |= 100 [254] CL. [wm cas 2. oe a, |e] SURFACE MOUNT [que weeny ae ruce news at [HL Teer rue emus O08 [13] |e | SOCKET STRIP. SY MHI (MOLDED BODY TOLERANCE) +.005 [+.13] (SEE NOTE 13) 2) ) REPRESENTS CRITICAL DiM. SSMXX-S-BE 3) COPLANARITY TO BE : DH: -38 28 . [39 100 [2.54] REF svsir 008" LS) cos [-15) 4) PACKAGE POS 02 THRU 36 IN TUBES, EXCEPT FOR 02 POS. WITH SV LEAD STYLE. (SEE SHEET 3, TABLE 2) 5) PACKAGE ONLY POS 04 THRU 36 IN TUBES. (SEE SHEET 3, TABLE PACKAGE ONLY POS 38 IN TUBES. (SEE SHEET 3, TABLE CUT FLASH TO BE oid Lael MAX NOTCH OF PPP12 TO BE ORIENTED TOWARD SAME END AS POSITION 1. 9) ROWS TO BE WITHIN .004{.10] OF ONE ANOTHER. 10) -36 MAX POSITION AVAILABLE, 50 FOR STOCK ONLY. i} ENDWALL AFTER CUTTING: .0334/-.005 [.84+/-.13] 12 IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION. 13.) FOR SV LEAD STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; OOD CUTS LOSE 1 POSITION PER CUT. QUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION SSM1XXXXXXXXXXX XXX T -BE: BOTTOM ENTRY (ONLY AVAILABLE ON SV) (FOR SV, USE S8N-)0(-S-BE) <S: SELECTIVE (SEE FIC TH War seLecTve 9 f OPTION =F: SELECTIVE =P: PICK -N PLACE PAD : ae (Pre Anant coef er (-SV ONLY) Post OF BODY, MOVE, ee a UGHT SELECTIVE MATTE TIN -K; POLYIMIDE Fil PAD \VAILABLE ON POS. 2 THRU 36 ONLY) :005 [.13] THICKNESS WITH SILICONE SV: SINGLE VERTICAL (SEE FIGURE 1) ADH FG 5, SHT 2) USE SSMXx-S Stk SINGLE HORIZONTAL (SEE FIGURE 2) USE SSMXXSH Dit: DOUBLE HORIZONTAL (SEE FIGURE 2) POLARIZING OPTION FIG. 9 SHEET 2 sald pecs SEE NOTE 11 (NOT AVAILABLE FOR -BE OPTION) J _ vOUNTING OPTION | =LC: LOCKING CLIP (USE 2 LC-05-TM) (SEE NOTE 12) 5 5 290 [7.57] REF TABLE 1 {0 foamion 80063) CONTACT #1 | CONTACT #2 SV C-85-02-x === H C-58-08-X = OH C-58-08-X C-58-07-x a (NO, OF POS x 400) .200 (2.54] [5.08] -SV FIGURE 2 IN=PROCESS [aroha =" +b 078 [1.98] 3) a L oe NO. OF POS. x .100:.008[2.84d:.20](CUT TOLERANCE) [7 (WOLDED BODY TOLERANCE) +.005[+.13] Px" NO. OF POS. x 100 (.100) P 7 BH HD [2.54] [2.54] Pied) sa00 2.54] [5.08] Pp f _ -100 [2.54] REF .225 [8.72] REF F) .070 fea Re} I .0154.005[.38 +.13] i venom! | Ze SECTION c-" USER DIRECTION OF UNREELING SCALE 4x AN SRE OF ONES o0g00 000 00000 00 00 Lyf Loy WH USER DIRECTION OF UNREELING TAPE & REEL VIEW MISC\MKTG MATERIAL: SSM1XXXXXXXXXNAN-XXX MAT Es as PRIMARY: CTA e130 Sam\l(ec ALTERNATIVE: Es ZENTE 6130 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 CONTACTS: PHONE (812) 944-6733 P.O. BOX 1147 PHOS BRONZE CABIO SPRING MADE BY: "KOLB 912-81 SHH KM SHEET _1 oF 5