AeroCore 2 for DuoVero Product datasheet PKG40178 USD149.00 AeroCore 2 for DuoVero Developed in conjunction with Stanford University Aero/Astro graduate students Robbie Bunge and Andrew C. Smith, the AeroCore from Gumstix offers everyone from enthusiasts to educators the opportunity to power their very own micro-aerial vehicle. With an ARM Cortex-M4 microcontroller running NuttX RTOS and an integrated connection for DuoVero series computers-on-module, AeroCore gives users a complete Linux installation on a PX4-compatible platform. Compatible with: the DuoVero Family of COMs, the Pre-Go, and the PreGo PPP. Customize Your Board Product Features Input/output 24-Pin Header 40-pin header 6-Pin Header 8xPWM Outputs GPIO/Breakout and Power Cortex-M4 SPI Breakout Robotics Accelerometer Barometer Controller Area Network (CAN) GPS Gyroscope Inter-board connector Board-To-Board Connector 3-Axis Accelerometer + 3-Axis Magnetometer Included For use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard. U-Blox NEO-7M GPS Receiver 3-Axis Angular Rate Sensor Ready to make the AeroCore 2 even more uniquely yours? Make the exact customizations you need in Geppetto today! Other connector 2x Low-Profile 20-Pin Header Mating connector 1x U.FL Connector What's included 1x AeroCore for Overo Key component 1x FTDI FT4232H Quad USB - Serial 1x Texas Instruments TPS62111 Step-Down Converter 1x ST L3G4200D 3-Axis Gyroscope 1x Memory (SPI FRAM 1MB 1.8V) 1x MS5611 Barometric Sensor 1x LSM303D 6-Axis Accelerometer Product links * Reference Manual * Technical Specifications * Check Arrow Stock * Firmware * Bootloader 2 x 70-pin Hirose DF40 Connectors Mechanical * Firmware (.px4) * CAD Drawing (DXF) * Geppetto R Workspace Length Width 96.5 mm L 50.1 mm W Processor Processor ARM Cortex-M4 Microcontroller Product series Product Family Communications USB Console Port DuoVero FTDI USB-UART Usb USB OTG USB Micro-AB Connector Page 1 of 1 Revised October 31, 2017 15:16