AeroCore 2 for DuoVero
Product datasheet
Product Features
Input/output
24-Pin Header 8xPWM Outputs
40-pin header GPIO/Breakout and
Power
6-Pin Header Cortex-M4 SPI
Breakout
Robotics
Accelerometer 3-Axis Accelerometer
+ 3-Axis
Magnetometer
Barometer Included
Controller Area Network (CAN) For use in applications
employing the CAN
serial communication
physical layer in
accordance with the
ISO 11898 standard.
GPS U-Blox NEO-7M GPS
Receiver
Gyroscope 3-Axis Angular Rate
Sensor
Inter-board connector
Board-To-Board Connector 2 x 70-pin Hirose
DF40 Connectors
Mechanical
Length 96.5 mm L
Width 50.1 mm W
Processor
Processor ARM Cortex-M4
Microcontroller
Product series
Product Family DuoVero
Communications
USB Console Port FTDI USB-UART
Usb
USB OTG USB Micro-AB
Connector
PKG40178 USD149.00
AeroCore 2 for DuoVero
Developed in conjunction with Stanford University Aero/Astro gradu-
ate students Robbie Bunge and Andrew C. Smith, the AeroCore
from Gumstix offers everyone from enthusiasts to educators the op-
portunity to power their very own micro-aerial vehicle. With an
ARM Cortex-M4 microcontroller running NuttX RTOS and an inte-
grated connection for DuoVero series computers-on-module, AeroCore
gives users a complete Linux installation on a PX4-compatible plat-
form.
Compatible with: the DuoVero Family of COMs, the Pre-Go, and the Pre-
Go PPP.
Customize Your Board
Ready to make the AeroCore 2 even more uniquely yours? Make the exact
customizations you need in Geppetto today!
Other connector
2×Low-Profile 20-Pin Header
Mating connector
1×U.FL Connector
What’s included
1×AeroCore for Overo
Key component
1×FTDI FT4232H Quad USB - Serial
1×Texas Instruments TPS62111 Step-Down Converter
1×ST L3G4200D 3-Axis Gyroscope
1×Memory (SPI FRAM 1MB 1.8V)
1×MS5611 Barometric Sensor
1×LSM303D 6-Axis Accelerometer
Product links
•Reference Manual
•Technical Specifications
•Check Arrow Stock
•Firmware
•Bootloader
•Firmware (.px4)
•CAD Drawing (DXF)
•Geppetto R
Workspace
Page 1 of 1 Revised October 31, 2017 15:16
